Way to get line count from text areas?

the getLineCount method on JTextArea only returns the number of linebreak characters in the stream, but I am looking to get the number of rows the text is taking in the text area. When you have word wrap activated, and the text wraps around, no linebreak is inserted so the getLineCount method will return a wrong number. anyway to get around this?

http://forum.java.sun.com/thread.jsp?forum=57&thread=122550

Similar Messages

I've lost my iPhone 4... How can I find it when the device is offline when using "find my iPhone app"????? Any way of getting a location from it????

I've lost my iPhone 4... How can I find it when the device is off linesmen using "find my iPhone app"????? Any way of getting a location from it?????

No. It must be online in order to locate it.
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Is there a way to get my songs from my old ipod to my new one?

i was just wondering if there is a way to get my songs from my old ipod nano to my new ipod nano because some of the songs i have are not in my itunes... so if there is a way to get my songs from my old ipod to my new one can someone tell me how please

You can't copy directly from one iPod to another. If the songs on the old one aren't in iTunes you need to copy them back and update the new one from there. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
TuneJack Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
SharePod Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
Floola Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible - Windows version only)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Whichever of these retrieval methods you choose, I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

HT4407 i just lost that disc. any other ways to get support disc from another pc? or recover my last mac os?

i just lost that disc. any other ways to get support disc from another pc? or recover my last mac os?

AlisinaBahadori wrote:
i just lost that disc. any other ways to get support disc from another pc? or recover my last mac os?
You are making no sense at all, are you using Lion or Snow Leopard,? did you try BobTheFishermans sugegstion for booting into OSX, please answer the questions rather than your current approach.

HT201272 IS THERE ANY WAY TO GET PROGRESS BACK FROM A DELETED GAME THAT HAS BEEN BACKED UP ON MY COMPUTER? I HAVE TRIED TO SYNC THE IPOD AND THE PROGRESS DOESNT RETURN, ITS MINECRAFT.

is there any way to get progress back from a deleted game off ipod/ it was backed up to the computer but when i synced the ipod the progress didnt return. its minecraft game

- Just transfer the apps and iBooks to the computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases
- Preferences and photos taken by the iPad are included in the backup that iTunes makes
nursebones wrote:
No music. All my music is on my computer and my iPOD. Just need to backup apps, preferences, iBooks, and photos taken on the iPAD.

I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

Technical issues aside, there's still a legal issue.
Neither 2006 nor 2007 MacBooks shipped with Snow Leopard 'factory' installed. OS X 10.6 Snow Leopard became available in September 2009. So you purchased and installed a Snow Leopard upgrade disc on the 2007 system at some point.
If your Snow Leopard upgrade was a single-user copy, then legally, you need to purchase another one for the second computer. If your Snow Leopard upgrade was a Family Pack 5-user license, then you're good to go.
http://store.apple.com/us/question/answers/product/MC574Z/A?pqid=QTUXD7AF4YU9FJD YUTDPCKYKUDDDXKHTK
If you have an active MobileMe account, Apple was giving away a single-user upgrade copy of Snow Leopard for a limited time, and you should have received an email with a link, or been offered the opportunity when you signed in to your MobileMe account on the web:
http://www.macrumors.com/2012/04/24/free-snow-leopard-discs-for-mobileme-users-n ow-arriving/
Worst case, single-user Snow Leopard upgrade discs are $29 retail, direct from Apple. I'd hate to have two computers and no OS installation CD's for whatever version I'm currently using.

I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

Save all the photos from your Droid into a folder on your computer.
Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab. Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos. Then click the SYNC or APPLY button on the lower right window.

Link between Delivery schedule line counter from PO and the material docume

Dear Gurus,
I have one PO with single line item having delivery schedule -
Material 1 -
delivery schedule 01.01.2009     2000
                                                     01.03.2009    5000
I have received quantity against this Po
I want to know where I can find the link between Delivery schedule line counter from PO and the material document
Best regards
Sar

There is no link from the MAterial document line item (Table Mseg) to the PO Schedule Line (EKET).
If this is for Evaluating an on time delivery or GR, you may consider the following approach.
PO details Po Date QTY
Sch1   01Jun2009   200
SCH2 08Jun2009   100
GR Details
GR1   01Jun2009   180
GR2   07Jun2009   110
GR3 09Jun2009      10
Calculate a *** total qty for the PO Line.
PO details Po Date CUMUL QTY
Sch1   01Jun2009   200
SCH2 08Jun2009   300
Calculate a *** total qty for the ontime GR.
PO details Po Date CUMUL PO QTY CUMUL GR on time
Sch1   01Jun2009   200                180
SCH2 08Jun2009   300                 290 (180+110) the 3rd GR was too late
Evaluate the PO SChedule Lines as follows:
Po SCL qty + CUMUL GR QTY - CUMUL PO QTY = ADJ GR ON Time Qty
SCH1 01Jun2009
200 + 180 - 200 = 180 on time for 01Jun2009 date ( 90% fill rate)
SCH2 08Jun2009
100 + 290 - 300 = 90 on time for 08Jun2009 date (90 % fill rate) the first 20 of the GR on 07Jun2009 went to fill the late, early date.
Best of luck !
SCH2 100 +290 - 300 = 90 on time for 07Jun2009 date

Is there any way to get my photos FROM my iPod Touch back onto a new hard drive?

My Mac crashed last Friday. First timeIs there any way to get my photos FROM my iPod Touch back into my new hard drive. The iTunes sync only goes one way from the computer to the iPod.
It syncs the photos taken with the iPod (really an old iPhone 3G without phone service) but not the folders which I synced from the old hard drive to the iPod over the past year.

thank you for the tip.
Yes, my computer was backed up. for reasons way too complicated to go into here, these particular folders were not part of the backup.
Thanks again for the help.
jglaiche

Since the upgrade to ios7.1.1 I have lost my ringtones. Is there a way of getting them back from my itunes accout since I've already paid for it?

since the upgrade to ios7.1.1 I have lost my ringtones. Is there a way of getting them back from my itunes accout since I've already paid for it?

Yes, go to your 'iTunes Store' app on your iPhone or whatever device you lost them on, then go to the 'more' tab, and choose 'purchased', then find your ringtones that you wanted and redownload them, you won't need to repay for them.
Hope this helps :)
Happy hunting :)

Is there a way to get the history from find my iphone?

My iPhone disappeared from my car while it was valet parked at the airport. I did a find my phone when I realized I had left it in the car, and it showed the location to be valet parking lot. I assumed all was well, did a remote lock operation, and enjoyed the vacation. Is there any way to get the log from find my phone to show that it was where it was when I did the find operation?
Sam

No.

LabVIEW DSC: How to get alarm status from the area?

Colleagues,
I have, lets say, 50 Shared Variables where alarming enabled. Some of these variables assigned to area, so I can get status of the entire area or acknowledge an entire area of alarms (prior to version 8.x there was groups of the tags).
Now I would like to get alarm status from the entire area. How can I do it?
In version 6 I was able to wire tag group to Get Alarm Summary Status. Now, in version 8, Alarm Status.vi can be wired to the array of the variables, but not to area. Is it possible to get all variables from the area?
regards,
Andrey.

I am not sure if I should be posting my problem under this particular topic. I am having trouble understanding acknowledge alarm vi and what this vi is supposed to do is not clear to me yet.
I have around 300 shared variables in my project and I have created a particular vi just to view the alarms that may pop up during runs. I created a main menu and this alarm vi can be accessed upon a button click in the main menu. Users get alarm alert based on sound configuration. Then he can navigate to the alarm vi and acknowledge the alarm. The alarm vi only contains alarm and event display found under DSC module.
The problem is everytime I click the alarm button in the main menu, it takes around 2 minutes for the alarm vi to update which is very annoying and unsatisfactory in the middle of run. I am not sure why it happens and I haven't got any response from support yet. These shared variables are managed under 10 different library files that are set up based on different loops of the process (flow, pressure and so on).
Then I looked into three alarm examples that ship with DSC module. None of these examples use acknowledge alarm vi. I implemented another vi similar to alarm demo vi in that example - containing multicolumn listbox. I created acknowledge event containing acknowledge button and used the acknowledge alarm vi under this event. Read vi alarm is under timeout event.
When I click the acknowledge button as soon as I see the alarm in multicolumn listbox, nothing happens - the color of font does not get changed to purple neither any alarms get acknowledged. I tried to aknowledge alarm by variable name or alarms or alarm area, it does not give me anything. What is this acknowledge alarm supposed to do? I tried to find examples everywhere in the web that uses this particular vi and haven't found one yet.

Is there any way to get the files from other computer ?

Hai all,
I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
regards,
Namanc

Bro Take it easy.
Think you need to send a Image file named ("abc.gif")
now develop a server using ServerSocket and connect it in local IP and any PORT
For example i think ur server is connected in "localhost" and 9000 port.
Now make ur server educated using some commands.
For example:
FileName: <File Name String>
[Means new file is sending by connected client]
FileSize: <File size long or int value>
[ So that ur server can determind about the total length of sender file]
DataModeOpen
[Now your client will send its image data, this command means your client software is sending data]
fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
DataModeClose
[Means file sending finished]
Close
[Means your client connection is closed]
Now develop a client supporting this command.
For example(Server):
String getFileName=null;
long getFileSize=0;
public handleCommand(String getCmd) {
    if(getCmd.startsWith("FileName")) {
            String[] splitData=getCmd.split(":");
            this.getFileName=   splitData[1];
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("FileSize")) {
            String[] splitData=getCmd.split(":");
            this.getFileSize=Long.parseLong(splitData[1]);
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeOpen")) {
           //data mode open so receive data
          receiveData();
          outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeClose")) {
          //close client socket
         getClientSocket.close();
}For client:
DataInputStream dataIn=null;
BufferedOutputStream bout=null;
public sendFile(bytes[] getBytes) {
        //if ok found then do other or show error message
    if(sendCmd("FileName:"+getFileName)) {
        if(sendCmd("FileSize:"+getFileSize)) {
            if(sendCmd("DataModeOpen")) {
               bout.write(getBytes);
            } else {
               showError(3);
        } else {
               showError(2);
   } else {
        showError(1);
}i think it will help u

Is there any way to get my pics from my iPhone to my new MacBookAir?

Is there any way to get my pics from my iPhone to my new MacBookAir? Sync only works from the MBA to the iphone.

PhotoStream - http://support.apple.com/kb/HT4486
LN

Is there any way to get my reminders (from the new iPhone app) to sync with something on my laptop (Mail, iCal, some other desktop app)?

Is there any way to get my reminders (from the new iPhone app) to sync with something on my laptop (Mail, iCal, some other desktop app)?

Yes, if you have iCloud set up on your phone and computer, then reminders will be synced through iCal.

Way to get line count from text areas?

Similar Messages

Maybe you are looking for