Way to set 3D Preview "ON" by default?

I would like 3D preview to be on by default when opening the 3D dialog box. Any way to do that?
Thanks,
Ray
BTW… I tried to search for an answer, but the resulting threads showed up without titles. Must be a problems with the forum.

Since the 3D is handled by an .aip (AI plugin; a compiled C++ bit of software) it's impossible to change the defaults. Yolu could do a feature request. It was probably set to off originally to help speed up the process.

Similar Messages

HT202639 Is there a way to set a wifi network as default?

so, i am trying to keep an airstash connected to my device, but it toggle back and fourth with another wifi signal. Is there any way to keep the airstash connected as default?

Go to Settings/Wi-Fi, tap on the other network, tap "info" and hit "Forget this network"
If you have "ask to join networks" activated as well, your device will connect automatically to those you joined before and choose not to forget.

Looking for a way to set my own destination for default save as for pdf's

Adobe reader always wants to save files I open online to a temporary directory and I would like to set a specific location on my C drive. It wouldn't be so bad, but Adobe resets after I save every file to trying to save to the temp directory even if I have another copy open that saves to the directory I want.

None of the above.
First, the specs for gigabit Ethernet would seem to be fast enough, but Ethernet is a packetized delivery system and the packets of data do not always arrive in the same order they were sent, and then they need t be re-ordered for video playback. Potential result: Dropped frames.
Second, a PC cannot be used as a file server for Final Cut Pro editing.
Third, having 5 or 6 computers banging away at a single computer would also tend to result in dropped frames.
What you really need is a SAN, a Storage Area Network. Those tend to be pricey. There is an alternative that might be a bit more budget friendly, but it cannot be used the way you have specified.
You could install external drive arrays on all computers and a gigabit Ethernet switch. Then use the Ethernet to copy needed files between systems. It is sometimes possible to edit from one workstation to another using gigabit Ethernet, but it invites dropped frames, so I don't recommend it.
BTW, when you say SD, do you mean uncompressed 601 video, or DV? Uncompressed 601 video is 21 or 28 MB/sec/stream. DV is 3.6 MB/sec/stream. Big difference in overall bandwidth requirements for what you'd like to do.
IMO, your best bet would be to bring in a consultant/technician who can spec out a system for you. Don't try to do it yourself.

Is there a way to set up DuckDuckGo as my default search engine?

Instead of Google to protect my privacy how do I set up DuckDuck as my start page?

''Source: http://paulrobertlloyd.com/2012/03/duckduckgo/''
1. Visit http://duckduckgo.com/.
2. Go to the search box in the upper right of the browser window. Click the down arrow, and select Add DuckDuckGo.
''The rest is similar to the above reply by Swarnava:''
However, changing the default provider isn’t enough as search terms entered into the address bar will still use Google. Change this by completing the following steps:
1. Enter into the address bar.
2. If you get a warning, click I’ll be careful, I promise.
3. Type Keyword.URL into the filter field.
4. Double-click the value column for this item and enter http://duckduckgo.com/?q=.

I cannot find a way to set my home page as default when I open new tabs

open firefox 4 beta
select a home page through options menu
open a new tab
It is a blank page
Look for a way to have the new tab open with the home page as default.
In IE there is a checkbox to select the home page as default on new tabs
Using Win7 pro premium

You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/2221
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/777

Photoshop Elements 10 - is there way to set tile to vertical as default?

Have managed to create a AutoHotkey script for keyboard shortcut to tile via Window/Image/Tile but on first use defaults to horizontal. Once changed via Arrange 2up it remembers. Is there a registry hack or a tip or trick? I do side by side all the time and although there is the workaround it's moderately irritating.
Thank you.

Thanks for the fast reply. I'm using Windows 7. Works the same with or without the script which I've set as Control+Z. I was using floating but tried setting tabbed in Preferences but it did not seem to have any effect.
However, Windows>Images>Consolidate All to Tabs worked like a charm and vertical. I'll have to rejig the script so it does the Consolidating first but I do wish it could be adjusted simply in Preferences. I'm not a natural scripter.
Thanks you again for the good advice.

Is there a way to set Thunderbird as the default contact list in your PC?

I am trying to link my Q10 to my PC in order to save my contacts and calendar. It is trying to use Microsoft Outlook but I don't use that program and I want my contacts to be saved in my computer not in a cloud somewhere. Any hints on how to make this work or if it is even possible?
Thanks.

Hi and Welcome to the Community!
Nope...refer:
http://docs.blackberry.com/en/smartphone_users/deliverables/59312/tom1359418099212.jsp
BB10 was originally designed without any direct sync and only via cloud-based services...Outlook was added recently, but so far no other desktop PIMs have shown up as compatible.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there a way to set the iPhone to have a black screen with white text?

I found the "Invert Colors" option under Settings > General > Accessibility, and like it a lot. It provides enhanced readability.
The problem is that it inverts all colors, even for apps. So when I view a web page in Safari, all the colors are inverted for the images.
And when I view my photos in Photos, these are also inverted as well.
Is there a way to set up the iPhone to default to a black screen and white letters for the OS, but allow the apps and photos, etc. to
be viewed in their regular colors. For example, can I run Photos to view my photos on a black background but view the photos in their
normal coloring?

I'm afraid that is not possible, maybe this could bee a step in that direction if you use the mentioned Zoom function:
Invert Colors and Grayscale
Sometimes, inverting the colors or changing to grayscale on the iPhone screen makes it easier to read.
Invert the screen colors. Go to Settings > General > Accessibility, then turn on Invert Colors.
See the screen in grayscale. Go to Settings > General > Accessibility, then turn on Grayscale.
Turn on both effects to see inverted grayscale. You can also apply these effects to just the contents of the zoom window—see Zoom on page 150.
copied from page 151 of the user guide iOS8

How to set system date as a default value in UIX/XML page?

Example: We set default values using following statements:
<set property="inputValue" target="${bindings.PoNumber}" value="${'1234'}"/>
<set property="inputValue" target="${bindings.UserName}" value="${param.MyParam1}"/>
In JDeveloper Help, we cannot find a way to set a Date attribute's default value to today's (system) date. Any suggestions?
Also, does anyone have a reccomendation on a good book for uix/xml?
Thanks, Ali.

bump

IW31 how to set functional area as a default value?

Dear all:
Can anyone guide me, is any way to set "functional area" as a default value (t-code iw31 Additional Data -> Functional area)?
Thanks in advance.

Hello ,
The standard funtionality is set to default the Functional Area from the Order Type. I believe it is possible to change the default value for the Functional Area in Transaction KOT2. The PM order types should be selectable in this transaction.
I hope this information has been helpful.
Best Regards,
Frank

How to set Bless N900 as the default Camera App?

Is there a way to set Bless N900 as the default camera app? I guess there would be a way to manually set the buttons to perform certain tasks, so maybe it can be done, but not sure how?
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

check your settings (reboot first )
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Setting Print Capture File Name Defaults

Hi All.
Major tweakage here.
Is there a way to set the Mac Print Capture default information? Right now I get something like "screenshot 2010-06-22 at 1.09.32.png". Is there a way to get rid of the time stamp?
Is there a way to do this for /scans/ that come in through Pages?
Are there other default stamps such as this that I can collate in a single coherent way?
Thanks.
Jon
P.S. Not sure if there is a better place to post this or not...

Thank you very much.
If anyone finds an affirmative answer to this and can post it to the thread I will get a notification of the answer. This one would be a nice one to be able to streamline things over here...

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Is there a way to set which keychain item is used by default for a site/application?

This question applies primarily to the keychain in Mavericks, but also the iCloud keychain and its use in iOS.
There are several sites and services for which I have multiple logins that serve different purposes. Whether it's because they are business/personal accounts, or accounts that pertain to different functions, I have multiple logins for many sites/services I use daily, however, there is usually one primary account for each that I use for most purposes.
What I would like to be able to do is set which of these logins appears by default. An example scenario might be if I have an "admin" account on a site, and a "dev" account that is used for testing purposes to Q/A the site from the perspective of a user who doesn't have administrative access. Most of my work happens under "admin" but whenever I go to the login page, the "dev" account prepopulates in the login form and I have to start typing admin and select that. It also does this on my iPhone, which is where this issue becomes very cumbersome, because there is no dropdown for me to select which credentials to use to autofill from. It appears to only allow autofill from whatever it sees as the first account to come up, and I can't seem to change that without deleting all the other keychain items that come up ahead of the one that I want. This kind of thing also poses a significant risk of accidents if, say, I have multiple payment methods saved and the one that comes up by default isn't my personal payment method, but a business account that's only meant to be used for business purchases. If that comes up first, if I don't replace it with my personal details, I might accidentally place a personal charge on a business account.
So I really have 2 questions:
1) Is there a way to set the priority order of which account populates a form by default from the keychain?
2) When filling out credentials on iOS, an "autofill" button appears at the top of my keyboard, and I can begin typing in a field and it will show the autocomplete of the username that I am typing, but if I click autofill, it replaces it with the original credentials and not those of whatever I began typing in. If I click on the username it's autocompleting, it just clears the autocomplete. Is there some way to choose which username I'm autocompleting a form with?
Thanks to anyone who has any ideas about a solution to this, and if there isn't, and if anyone at Apple is listening, in an ideal world, it would be like setting the priority order of known wifi networks, where you can drag your first choice to the top of the list.

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Way to set 3D Preview "ON" by default?

Similar Messages

Maybe you are looking for