Ways an attacker might start malware with a known good service

How would an attacker be able to get malware started at the same time a legitimate, known good service is started? I am consulting on trying to fix a server that has a service starting and using the tool StealthWatch, we can see that the service is
shown as running TCP scans of blocks of network addresses. I have compared the MD5 hash of the service to a known good copy of the same service on another server and they are the same, so I pretty confident that the service itself is not changed. I see no
dependencies for the service and other testing I have done is testing using sigcheck.exe to validate that the service is signed and also checked the signature all of the files in the same directory where the service is located.
What techniques have you seen that can be used to run malware along with a legitimate service?
SnoBoy

Hi,
Here is some general information regarding malware for you:
Defining Malware: FAQ
https://technet.microsoft.com/en-us/library/dd632948.aspx
Malware
http://en.wikipedia.org/wiki/Malware
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

What can I do about freezing on start up with battery in bay?

My Macbook Pro is beyond the warrenty period. It had similar problems even during three year Care period but now I'm on my own. When I start the mac with the battery in the bay, with or without the power cord also attached, it comes up but freezes. I have to restart without a battery. It's the same with a known good battery from another mac. What is wrong? Is there anything I can do?
I purchased the next OS but it won't install.

Always keep the battery in the bay. Your MBP runs at full capacity with it in. That said sounds like you've got either hardware or software issues. Eliminate each one independently. Boot from your OS installer disk and run Repair Disk from Disk Utility. You can't install Lion 10.7 (the next OS) unless you are running 10.6.6 or higher.

13" white Macbook will not power on with known good battery

Macbook will not attempt to power on with a known good battery that shows full charge. Also, when Magsafe plugged in, there is no indication (no green or amber light) it is connected. This charger does work with another Macbook (same kind).
I have checked the Magsafe/port for any dust & debris, and have followed the tips listed in the FAQ's for a macbook with no power. As I said, the battery & charger both work in another Macbook.
Suggestions please!

Hi Stephanie. It could be a logic board issue or simply the power button at this point (let's hope its the latter). Can you give us more info on how this happened? Did the computer suddenly shut down or was it stored and unused for quite some time?
Without any power, and with you making sure both the battery and and charger is working, then I would suggest bringing it in to the Apple Store.

8320 won't boot up, even with known good battery

Hi Guys, my first post, hope you can help me.
I've got an 8320 which died last night, initially suspected a dead battery so have changed it this morning for one that is known to be good, as its from my other phone where it shows fully charged.
With the known good battery in the suspected faulty phone I get a bettery symbol with a red line through it.
Is it worth trying to reinstall the software or is it a hardware issue ?
If its worth doing the software how do I go about it ?
Thanks in anticipation of your help.

Welcome to the forums
Restore a bricked blackberry using this guide: http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Hopefully it all works out!
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

My address book and iPhone pics have become low resolution. Is there a way I can prevent this from happening when I start out with a higher resolution picture?

I guess I squeezed my entire issue into the subject line. lol When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts. I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses? Thank you!

Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

Starting Fresh With iTunes 9.0.1...best way to get music back in/import?

Had some library troubles with iTunes 9, and decided to do a clean install of not only the program, but of Snow Leopard itself. I was waiting on an iTunes update to come out before I decided to re-load my library in, since I didn't want to risk repeat problems (I've always been one of those bleeding edge-ers, and this is the 1st time I've ever had a problem/held back...guess I learned my lesson). 9.0.1 is out and seems to address the problems I'd been having, but I caught the "start fresh" bug and I want to start over with iTunes. No playlists, play counts, etc need to be saved.
I do have a full backup of my previous system (thanks SuperDuper!), and I'm wondering what the best way to get all of my music back into iTunes is.
-Do I use the Finder to simply drag the contents of my old "iTunes Music" folder into the new "iTunes Media" folder?
-Do I drag the whole folder and drop it onto the iTunes window? (I'm worried this method won't put iPhone apps, ringtones, audiobooks and podcasts in the right place).
-Do I use the import function?
Notes: prior to making the backup, I did upgrade to/select iTunes Media Organization
I did see THIS article: http://support.apple.com/kb/HT1451 but it says it's old and I wonder if it applies to iTunes 9.
Thanks for any help!

You might want to check that your certificate that you made has been applied to iTunes.app
try this code in Terminal"
codesign -dvvvv /Application/iTunes.app
Does the name on the certificate match the one you created?

HT3964 When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.

When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.
If i backspace everything and start typing again in the same area, it will work properly the second time.
I am using a ~7 month old macbook air with mavericks.
Any tips to get rid of this issue would be greatly appreciated.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Throt|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

What's the right way to start up with Portal's dev?

Hi to all Portals experts,
I am really struggling to start up learning Portals and more specific their development.Here is the problem - I am a bit new in the NetWeaver but not new in J2EE environment. I went trough all WebDynpro tutorials and really the documentation was written nice.Good hands-on approach with lots of examples and that is what I found with WebDynpro - everything well explained step by step.
But when I started the Portals Tutorials I was a bit disappointed.
1.First of all, there is no explanation which tools one needs to start up with Portal Dev?
I only have SAP Netweaver Development Studio SP15 installed on my PC and I dont have any access to R/3, CRM or other system. Is this enough to at least start to learn Portal Development or not?
2. I realize well that at some point I will need real system to play with but , until than what useful practice I can do on my own and how?
- Even within the WebDynpro tutorial , the very first Part : Define a system - (http://help.sap.com/saphelp_nw04/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/frameset.htm) -In the portal, navigate to System Administration - System Configuration - System Landscape
Which Portal ? I dont have System Administration on my NWDS SP15?Is is something I should install?unclear?
3. My understanding is that NWDS SP15 contains EP , within its J2EE local engine , but is this EP.6.0, is this enough to develop complete Portal Application A-Z or not - unclear ?
4. PDK. Somewhere I read that Portal Application can be developed with either WebDynpro or with PDK. Ive read about PDK but It is not clear if it is Dev Kit as its name says , should it be downloaded , installed or imported into NWDS, again? And bottom line do I need PDK as a Portal Developer, and at which point?
I only need the starting point for Portal Develop. or some guide that should set milestones 1st ,2nd .. I would prefer the hands-on approach. If some of you has already taken this path and can help me with your directions, links, at least how to get started, I will highly appreciate it! Thanks in advance!Regards, Bob

Hi Bob,
The below reply is as per my experience with Development so far:
1> It is not necessary to have access to R/3 or any other SAP/non SAP application unless you are writing an application in connection to them.
Example: An application which is reading data from R/3 and displaying the same in a table. Yes, in this scenario you would require access to R/3.
2> System Administration is a role just like Home, User Administration, etc in Portal itself.
It contains all the configuration related to System Landscape, Knowledge Menegement, etc
If in case you have not been given this role, you may ask your System Administrator to create the required system (PCD Object). You may then use this system from your Profile (Personalize Portal) link directly.
3> NWDS resides over Portal so you may create your own standalone application or application thats talking to the underlying Portal.
WebDynpro is used to create UI & likewise you may build Web applications or EJB applications.
4> PDK stands for Portal Development Kit. YUou may ask your administrator to download and assign the same to you. This would appear as a "Java Developer" named role in your portal. It contains all APIs required for Java development.
If you do nto have this, you may still use the Javadocs provided on SDN itself.
Depending what custom developmetn you do, depending upon the type the .par (portal archieve), .ear (Enterprise archieve), .war (web archieve) needs to be deployed in portal, so that users may access/view the custom created data.
Hope this helps
All the best!
Warm Regards,
Ritu

One day I just went on my iPod on messages and the log in sign showed up I thought that was weird because I am always logged i so i logged in and it went all the way back to the start! It is the same with FaceTime I do not know what to do?

One day I just went on my iPod on messages and the log in sign showed up I tried logging in and it just brought me all the way back it is the same with FaceTime please help!

Try:
iOS: Troubleshooting FaceTime and iMessage activation

Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

How to start of with Oracle HCM fusion applications to gain good grasp on the technology

I have been working in Siebel for a long time and I am currently moving to Oracle Fusion HCM application.I would like to know the best way to start up with it and I would also like to know the possible way to go about it so that having 7years of experience I can justify my knowledge in this technology and skill.Could anyone please guide me as to how to go about it.What are the things i should start from and how should i go about it,what forums to follow,what online tutorials to look at.
Thanks and Regards

Hi.
There are loads of resources out there, but with so many it can be hard to know where to begin. Obviously we cover just Customization-Integration related areas not the whole stack. I don't have anything specific to your Siebel background, however hopefully these "top pick" recommendations will help you. My personal advice is to pick one topic or technical component at a time, because trying to learn everything at once quickly becomes overwhelming.
1) Chapter 2 of my book, now a few years old, gives a Technical Overview of the stack. Get it for free here: http://www.oracle.com/technetwork/articles/managing-fusion-apps-418611.pdf
2) Oracle Learning Library is a good resource for demos and well-crafted content on many topics. Use the search to find Fusion Apps content: https://apexapps.oracle.com/pls/apex/f?p=44785:2:0::NO:::
3) Whilst it might seem predictable, our online help is the intended content for getting started. This was overhauled recently and the new layout really helps. Both the product docs and the help portal content is very well written by our experts. Getting Started with Oracle Fusion Applications Lifecycle Management Release 9
4) The MyOracleSupport site has quite a few bits of content on technology component usage inside Fusion Apps. Look for the "Information Centers" for applications technology or BI for example where you'll find lost of top content listed by category.
I am also working on some "resource roadmaps" - a tool to give people to all key resources for a topic in a quick and visual way. Keep an eye on our blog for more here.
Kind regards
Richard
FA Developer Relations.

Is there a way to create a flipping book with the flipping 5k adobe software?

Am I the only one pissed with the f adobe products?
Is there a way to create a flipping book with the flipping 5k adobe software? Is it Flash, etc?
Thanks

Maybe a forum search on "Windows registry" would turn up some useful things. You're not the first to ask this. You might save yourself and everyone else some time if you'd simply do that.

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
I tried using flickr and powerpoint as a work around but no luck. I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file. I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set. It still displays everything, pics and the wmv file at the default 3 sec.
I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

Welcome to the Apple Community.
No that's not possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Ways an attacker might start malware with a known good service

Similar Messages

Maybe you are looking for