Ways to make up for lost time...

Since the release of 2.0 I find myself spending so much time backing up/syncing.
"What used to take two minutes now takes all day..."-sh
God forbid a I add an App from the iP itself and then sync that....
Anyway, since there are only so many hours in the day, in order to make up for lost time:
I got an EZ pass--no more stopping to pay tolls.
I bought a case of muscle milk (RTD-ready to drink) No more blending my life away....
I got comcast "Blast" for internet connection/___sbsstatic___/migration-images/migration-img-not-avail.png Whoah/___sbsstatic___/migration-images/migration-img-not-avail.png
I started brushing my teeth in the shower. I've stopped going in the sink
I added a chip to my car--150 more horses just like that.
I now do the same amount of cardio/minutes per session/number or times per week only now, beforehand I consume two 6 hour energy drinks and 3 double esppresso---so my heart races the same beats/minute in an hour as it normally would for 2 days.
I never respond to Tamara's posts--that shaved a lot a lot/___sbsstatic___/migration-images/migration-img-not-avail.png
Please let me know if you've got a timesaving tip....

Have a look here...
http://macmost.com/what-to-do-when-your-hard-drive-is-full.html
You may also find this of Interest...
http://support.apple.com/kb/HT1147

Similar Messages

  • The way iPhoto makes choices for slide shows?

    So far I have been having very good luck with iPhoto and slide shows using the "scrapbook" layout. It is doing about 99% of what I want. Here are my current 2 issues:
    1. As I see it, iPhoto is determining, based on the photo, what kind of presentation to use for each picture (whether it is vertical, horizontal, the 5 pane with the oval in the center, etc.). My question is whether there is a way to control that for a particular slide? Can I force a picture to be horizontal? Can I force which picture is where in the 5 pane slide? Sometimes that oval overlaps an important piece of the underlying photo.
    2. My second issue is that I have a woman sitting in a chair with a baby laying on her lap. iPhoto insists on making a slide of the woman, but crops out the baby on her lap. How can I force more of the picture being shown?
    Any insight is greatly appreciated...
    Paul

    As I see it, iPhoto is determining, based on the photo, what kind of presentation to use for each picture (whether it is vertical, horizontal, the 5 pane with the oval in the center, etc.).
    It’s not the size, it’s the Aspect Ratio - whether it’s landscape or Portrait layout.
    My question is whether there is a way to control that for a particular slide? Can I force a picture to be horizontal?
    Only by cropping the pic into landscape
    Can I force which picture is where in the 5 pane slide?
    Make sure it’s the fifth pic in the sequence
    My second issue is that I have a woman sitting in a chair with a baby laying on her lap. iPhoto insists on making a slide of the woman, but crops out the baby on her lap. How can I force more of the picture being shown?
    Crop it to focus on the preferred subject.
    Regards
    TD

  • Trying to find a way to make up for lack of equalizer

    My Creative SB Audigy 4. (WDM) card software didn't come with an equalizer, and I need some way to shape my overall sound output without going through each player (Winamp, iTunes, etc) that I use. Is there something out there I can install that will give me equalization control at the basic level?

    Make sure you do a full installation using the sound card installation cd. If for some reasons you are not seeing this Graphic Equalizer software, please write to Customer Support with the disk id.
    To locate the disk id:
    1. Insert the sound card installation cd into the cd-rom dri've of your pc.
    2. Browse to the root direction and look for a text file by the name: disk id.txt
    3. Open it using Word and copy the contents.

  • An easy way to make iTunes find lost songs?

    sorry for the messy header, I'll try to clear up:
    just updated to a new laptop (powerbook->macbook) and little problem with iTunes came up. all the files got copied over perfectly, but when updating the Tunes to newer version the path from playlists to files got lost. yes, I updated to 7.3 but after reading here some bad reports went back to 7.2, still no help. so, all the files (songs) show up in the lists in iTunes, but have an exclamation mark inside a circle in front of them, and when clicked the program says it can't find the file. it also asks if I'd like to show it the original file, and when I do that the music plays happily.
    is there an easy way to "batch-repatch"? I can't stand the idea of having to go through every single item in my musical library like this...
    thanks!
    Macbook 2,16 GHz Intel Core 2 duo   Mac OS X (10.4.9)   2 Gb 667 MHz DDR2 SDRAM

    It seems that I got over this problem very easily. Out of stupidity I didn't change the location info of iTunes Music-files (in preferences) when upgrading from my old laptop and changing the names of hard drives in the process. So for me the solution was simply to show the program where the files are currently located and go ahead and start listening to music.
    I'm blushing over here.

  • Is there a way to make LUNs for apple XRAID visible to XSAN 3?

    I have an apple XRAID with two controllers and 14 750GB drives. This and the server is connected to a silkwork 200e. I can mount the raid in Disk Utility, etc. but I can't see the LUNs in XSAN 3.
    Interestingly if I break the array in disk utility and then re-create it the LUNs will show up temporarily in XSAN.
    I took a look at the array in RAID Admin, but the LUN masking is turned off as far as I can tell.

    You can't use a software RAID set with Xsan. Break the array. Partition each of the two LUNs as free space. If necessary, use the "dd" command in TS1268 to wipe out existing filesystem metadata. You should be able to label the LUNs for Xsan then.

  • Best Reliable way to make slideshow for PC presentation

    I am working with a company that is making a presentation slideshow with music to play at the beginning of an event.
    Right now there is a lady doing it on a pc with PowerPoint.
    Is there a nicer way in my mac to do it?
    It has to play full screen, via a pc, thru a projector.
    thanks Laura

    Laura:
    If you don't need the Ken Burns effect it's my opinion that you'll get the best quality slideshow by creating it in iDVD. Open iDVD and create a new project. Select your theme and click on the "+" button at the bottom to create a slideshow section. Open it, double click on the slideshow button text, and go to the Media/iPhoto pane. There you can select an album or individual photos and drag into the slideshow organization pane. Select your slide transition and music playlist from iTunes (again the Media pane). If you want iDVD will let you add titles and/or subtitles to selected slides. Again that's just my preferences.
    Numerous iPhoto users have reported that the syncing of the slideshow to the music selected does not work as intended. It seems to be a bug in iPhoto. (With the new Quicktime update that may have changed, I don't know).
    Good luck.
    Do you Twango?

  • Is there any way to make flash for android in firefox "lock-in", that is control the flash content, not move the page when moving my fingers?

    Like when i want to increase sound on youtube and it moves the page not the sound slider

    Tap the fullscreen button on the Flash video?

  • I'm modifying someone else's website for the first time (noob = yes).  I only have ftp access to the site server.  Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

    Great, first post, sorry for the title.  But to repeat it:
    I'm modifying someone else's website for the first time (noob = yes).  I only have ftp access to the site server.  Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

    You can use the Dreamweaver FTP (or a different FTP client) to completely copy the original website to your development computer, then, before making changes, you can copy the whole thing to a directory called something like "website original"
    If you want to run both the old and new sites on the remote server, this is often possible. Add a folder/directory to the server and call it something like "new" and upload the new files there until you are ready to replace the old site
    All of this you can do with FTP

  • Just paid $6.99 for iPad highlighter at App Store.  It's supposed to let me highlight things in a PDF file.  I see no way to make it work in a PDF file.  Thanx ahead of time for any help.

    Just paid $6.99 for iPad highlighter at App Store.  I can find no way to make it work in the iPad file when I call it up.  It just sits there like any other app.  Thanx in advance for the help. [email protected]

    See if the developer has a website with intstructions. Check around in the app for instructions. They're often under settings. Contact the developer.

  • Iphone 4S newly updated to iOS8, keeps popping up window notifying me of things I turned off (cell usage, location, etc) to preserve battery life.  Is there any way to make them stop telling me every time I use the affected apps?

    I have finally taken the step of updating my iPhone 4S to iOS8 after learning the hard way last update to wait for the bugs to be worked out.  I was horrified to find that the battery was being sucked dry in no time at all.  After finding a great article posted elsewhere on the apple forums, I went through and turned off all unnecessary options involving the use of cell data, location services and background refreshing.  My battery life has thankfully returned to what it was before the update.  
    HOWEVER, now, every time I open an app for which I turned these things off, the window informing me of that pops up.   I am getting really irritated by this as I made all of these decisions deliberately and am well aware that I may need to go back and change them in order to activate certain capabilities when I want to use them.  I had done the same thing with the last iOS, but there were far fewer that needed to be turned off and the battery life seemed to be less affected by those that I left on so it was not the annoyance it has become now.
    Is there any way to make the phone stop presenting me with these idiot messages?   TIA

    Sorry no, there isn't a way to turn off those reminders.
    You can send Apple a feedback here  http://www.apple.com/feedback/

  • Is there a way to make the time on the iPhone larger?

    Ii have an iphone4 and I don't like how small the font for the clock is. I would like a way to make the font bigger so that I can see it better. Right now I have to go to the lock screen most times just to see what time it is. Any ideas?

    That font can't be changed.
    Any ideas?
    Buy a watch?

  • Is there a way to make the bluetooth source I pick for Siri persistent?

    I have my iPhone paired with the factory Bluetooth hands-free audio in a car. I like using it for phone calls, but not for Siri.
    When I start Siri, I can choose my audio source, but the iPhone forgets the selection after that session, and defaults back to trying to use the car's speaker and mic the next time I use Siri.
    Is there a way to make this audio source selection persistent?
    Thanks,
    Heath

    Hey,
    I'm a Quadriplegic and I use my iPad with a mouthstick I made. Everything works great. Send me an email to bradcletter AT gmail.com and I'll help you out with everything!

  • How to make repricing for specific conditions at the time of billing?

    Hello
    I'm SD Pricing person. Let me ask here experts below my concern.
    In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
    So when customers buy such products, they have to pay more as recycling fee including invoice amount.
    My question is... we want to make repricing for recycling conditions when the billing is created.
    Based on our configuration, recycling condition is not defined as a kind of tax condition.
    So this value is just copied from sales order.
    (pricing type in copy control is 'G' which means repricing for tax condition.)
    In this situation, we want to make repricing for those conditions during operating system.
    Is there any easy way to cover this?
    As I think, this is not easy because the system is already operated.
    To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
    So I want to put this way to the end of my choice.
    For this requirement,
    1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
        (ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
        But transaction data are created now and all open orders will be affected.
    2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
    3. To change pricing type in copy control is almost impossible because of the impact.
    What can I do this in this situation?
    What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
    Thank you in advance.

    Let me ask agagin to all experts.
    I want to make A condition to be repriced at the time of billing.
    For this, I have to set condition category as 'L' (Generally new when copying).
    But I do not want to do in that way becauuse I am maintaining big operated system now.
    In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
    That is why I am asking.
    Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
    At last, what I want is not to be shown this condition only in billing doc.
    'A' condition should be displayed in both Sales order and Billing doc.
    And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
    Thank you in advance.

  • TS3297 Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?!(for 1st time purchase)

    Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?! (for 1st time purchase)  I know the questions are not what I chose because I wrote the questions & answers down when setting up the ipod. Any ideas??!!!

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • HT4489 this is ridiculous! how do you keep the size of the picture for a contact that small? it is usually a piece of  a lager picture... any way to make the size of the pictures the 224 KB they want? I always thought the application cropped the picture t

    this is ridiculous! how do you keep the size of the picture for a contact in the address book that small? it is usually a piece of  a lager picture... any way to make the size of the pictures the 224 KB they want? I always thought the application cropped the picture to fit their requirements...
    Help
    Leo

    Gem
    Events are organised strictly on date and time, as read by iPhoto from the Exif data in the Photo. You cannot manually sort.
    Create Albums. You can do much more organising with Albums, use Photos from different events, place them as you will. Best of all, Albums use no disk space at all. They simply reference the file on the Hard Disk. So a pic can be 1, 10 or 100 Albums with no wasted disk space whatever.
    Regards
    TD

Maybe you are looking for