Wbadmin Insufficient storage available to create either the shadow copy storage file or other shadow copy data

Wbadmin throws the following error when running on Win8.1 upgraded from Win8 and using the -allCritical flag.
Insufficient storage available
to create either the shadow copy storage file or other shadow copy data
I want to be able to get the operating system's state volumes and not use -include:c: in a fixed way for cases when os is not on drive C.
Any suggestions?

Hi Yanivac,
For the issue, the target volume for a critical-volume backup can be a local drive, but it cannot be any of the volumes that are included in the backup. This is important.
Also, this error means that there is no enough space on the target volume.
I suggest you check the space on your target volume.
I would like to share the article with you:
http://technet.microsoft.com/en-us/library/cc742130.aspx
Regards,
Kelvin hsu
TechNet Community Support

Similar Messages

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Storage clause of create partition based on last storage value

Hello,
could you give some advice how could i resolve this problem ?
I have procedure which is executed by job every day, once a day, and what it does, it automaticly add new partitions on one table.
I am now strugling with how to construct statement that will place every new partition in new tablespaces.
I created 8 tablespaces named data1..data8 and for this purpose, so now i am trying to understand how can i perform check in what tablespace was last partition placed and based on that, add new partition in first next tablespace. For example, last was created in data8 tablespace, so next must be created in data1 tablespace.
How can i check that ? Anyone have some suggestions ?
I am currently going with this logic :
select tablespace_name from
(select * from user_tab_partitions where table_name='partitioned_table' order by partition_name desc)
where rownum < 2 )And with this i get the name of the last used tablespace for the last created partition, but i currently don't know how to use this info further.
Deos someone have some other idea about this ?
Edited by: user11141123 on May 7, 2009 4:01 AM
Edited by: user11141123 on May 7, 2009 4:16 AM

Yes Sean,
i would like this to do bacuse of the tablespace that are created for that purpose, for that partitioned table.
For some reason, they must be used, and by the current logic where that procedure adds new partiotions with default storage option, they can't be used
and all partitions are created in one other tablespace named data.
This is situation on production, and i created similiar test environment.
data tablespace in production will in few days propably be full and intention is to start create new partitions in this way , in those new 8 tablespaces and in some time tottaly leave current and only used tablespace and that is data tablespace.
So i would like to somehow implement storage clause on already fully functional
alter table add partition
statement inside that procedure.
Is there some way for that ? That i use that qury i wrote above , and by using that value add on existing statement for create partition storage clause with next in line tablespace ?

I've 4.7 GB free storage left yet I get the "Not enough storage" message

I still have 4.7 GB of storage left, however I keep on getting the notification that "...there is not enough iCloud storage available.."
All of these month I've allowed automatic iCloud backup but nothing was really ever backed-up so my contacts on iCloud.com are empty (as in Zero contacts)
I rebooted and clicked on back-up now, nothing happened, still the contacts are empty
The only application that was backed-up properly was the "Reminders"
Backing up my contacts, Notes and Photos had been on for months, I switched off the photos today, but all of these steps never really mattered since I seem to have made a wrong choice in purchasing a iPhone despite my friend's warnings.
Booo, what's the point of an iPhone if it doesnt back-up anything beneficial?

No. iCloud will not sync contacts from external services such as Hotmail. If you want to sync your Hotmail contacts with iCloud you will have to copy them to iCloud, then turn off contact syncing with Hotmail so you don't see duplicate contacts on your phone. To copy them to iCloud, do the following:
Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (if you have any contacts in iCloud they will still be there).
Download the app My Contacts Backup. Use this to backup the remaining contacts on your phone from Hotmail as a vCard attachment to an email that you send to yourself. Confirm that you have received the email.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), and confirm that this is set this to iCloud.
Go to Settings>Mail,Contacts,Calendars...tap your Hotmail account and turn off contacts syncing with Hotmail.
Open the My Contacts Backup email and tap the attachment to import the the Hotmail contacts back to your phone and to iCloud. You should now see all your contacts on icloud.com.

Task Manager Not loading Properly. Giving Error No more threads can be created in the System.NAPStatus UI and Some other Task related Errors

I have a problem with the Task Scheduler. It is not opening properly it is giving Error Message box at this time i am unable to post. The Tasks Scheduler is starts with a error alert "No more threads can be created in the System.NAPStatus UI".
I am unable to view the history of the tasks schecduled.It is giving message as
"The user account does not have permission to Access the Task History."
How to fix it. It is frustrating as can't able to track my Tasks and Create new Tasks. Any Suggestions helpful.
Thanks in Advance.
RehaanKhan. M

Hi,
Thanks for your post.
Please check event viewer if there are some error logs?
Meanwhile, there is a similar thread has been discussed:
Receiving error about "no more threads"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
Regards.
Vivian Wang

How to send the dynamically generated XML file to other site for further processing?

I have a question regarding exchanging data between two systems
using XSQL servlet. The situation is descrbed as the follows:
Assume that we have a simple XSQL page named "emp.xsql"
<?xml version="1.0"?>
<?-- XSQL page file "emp.xsql" -->
<xsql:query xmlns:xsql="urn:oracle-xsql" connection="demo" >
SELECT * FROM EMP
</xsql:query>
and we can access it through the HTTP request likes
http://web_server_name/xsql/emp.xsql.
Usually we will the returned dynamic XML file and show it on the
screen. Now the problem is that we don't want to show the
generated XML file on the calling screen. Instead, we want to
send the generated XML file to other website for further
processing, say, using JSP or ASP likes
http://other_web_server_name/XMLProcessing.jsp?.....
How can it be implemented using XSQL servlet?
Any hint and outline of the solution is appreciated.
Thanks

Ike,
Do you have a sample. I am searched so much in this forum for samples. I looked on SAX Parser. I did not find any samples.
Please help me.
Thank you for your posting.
Padma.

Copying large files freezes other Macs on the network

Hello everyone,
since we added a Mac Pro to our network, other clients sometimes hang and have to disconnect to a server (Xserve), when we copy large files (100MB and up) to that server with the Mac Pro.
Like the other G5's, the faster G4's and some PC servers, it is connected on gigabit speed.
Can someone help me to pinpoint this problem, or give me more information on finding the cause?
Maybe this can be usefull:
We replaced the cable by a Cat6 UTP cable.
Slowing down to 100mbit did not solve the problem.
We could not reproduce the problem when connected directly to the Xserve (no switch or patch pannel, only the cat6 cable).
Many thanks in advance for your help.

Hello,
yesterday, may boss, ordered some people to check the cabling and connections in our network.
They revealed several problems and advice to replace all cabling to cat6 or cat7.
Is the MP susceptible to network imperfections? Our other G5's never suffered from network flaws (now the ethernet cards are Intel instead of 'Apple' design...)
I did some other tests, and set the MTU to 750 instead of de default 1500. Without success.
I am trying to finde som info in the logfiles, but do not seam to find any details about the network problems. Where should I look? The system log, netinfo log is empty...
Greetings,
peter.

When I try to access files on my external hard drive on one macbook, it says I have insufficient access privileges. I use the external hard drive on my other macbook and it works fine. How can I fix this problem?

I've tried looking the answer up on google, but I've come up empty handed. Do I need to change permissions somewhere? I've tried setting everyone to have read and write acess on both machines and that didn't work either.
My macbook that works perfectly with the hard drive is running snow leopard. the other macbook is running leopard. i'm not 100% certain what brand my external is but it says firewire800/usb2.0 on it.
i appreciate any help i can get!

06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA

How do I create a screensaver from an mov file that other mac user can download? Is there free software or shareware available for this?

I have seen iScreensaver and PulpMotion and several others but I simply wish to convert an mov file to a screensaver that other mac can download. I haven't been able to come across a tutorial for this that works on Lion. Any guidance is greatly appreciated.

Does anybody know how to do this without iDVD?
You can't. You MUST buy iDVD.
Tell Apple how you feel. They do read these comments, and often react. Be nice.
http://www.apple.com/feedback/idvd.html
http://www.apple.com/feedback/
(On the above link, you will notice under Mac apps they do indeed show, iDVD!)
If that doesn't work you can purchase iLife 11 on disk (don't get the download) for about $29. You WILL get iDVD.
or if you like downloads, go to the Apple Store via the Store button at the top, (not the App Store) and look for iLife 11 it will list iWeb and iDVD. It IS available online.

At least one of the input binary log files contain fewer than two data samples.

Hi Guys,
I encountered this error, when I stop the my defined collection set and try to see the related report in Performance Monitor. I searched on the Internet says that a fast start/stop man end without enough counter data being collected. However, it seems not
the case in my scenario. I set the sample interval to 15 seconds (default) and run the collection set more than 1.5 days.
By the way, I monitor the Windows Server 2008 SP1 server on a remote Windows 7 SP1, both of them are 64-bits. Only general performance counters are added such as CPU, DISK related. I am looking forward to your help. Thanks in advance.
P.S. I forgot to say, I set up a same data collector on the local computer (Windows 7 box), this does not happen. So, I believe I must has some configuration issues for remote monitor.
Please mark replies as helpful or answers if they are helful, doing so can help others encountering the similar issue.

Hi,
It works locally but not remotely. I monitor Windows Server 2008 R2 SP1 (Enterprise 64-bit) remotely on Windows 7 SP1 (Ultimate, 64-bit), I start PerfMon using a domain account which is local administrator on both server boxes. I get a .cab files
for each data collection set, size from 1KB to 3KB. The sample internal is default 15 seconds and I believe the data collection set was started for more than 15 seconds or even hours. Here are steps to reproduce this issue:
On Win7 box, open performance monitor (PerfMon)
Connect to the remote WinSrv box
Create a data collection set, and add the following counters using default 15 seconds sample internal
Processor(*)\% Privileged Time
Processor(*)\% Processor Time
Save and Start data collection set
After more than 15 seconds or even hours, I get the above error message.
Thanks in advance.
Please mark replies as helpful or answers if they are helful, doing so can help others encountering the similar issue.

HT1373 Can some one please assit me. I have purchased a new laptop and copied accross my file of music from Itunes I can see the music in my files, however i can copy music from CDs, however the Itunes file does not connect or will not interface into itun

Hello can some one assit me please. I have purchased a new lap top and copied my old itunes files accross so i do not loose all my music, and have to start again. I can play and see allof my tunes and play these. However I am unable to access the Itunes store through my itunes files. It will not interface at all. I can access itunes store through the Web, but not through the my ituntes file. I have gone in and authorised the laptop through the various process. Highly frustrated already paided a computer person to fix this. However hed deleated all files and started again he had it work and then I turned computer on again and it will not interface from the itune file to itunes, So if I copy a CD it will not tell you the name of the track. I cannot asscess the itunes store to action anything. Please assit me
Regards
Karen

I am not an expert, but assuming that you have a Windows or Mac folder with music in it and want to move that to a new laptop, I think you have to import it into iTunes. iTunes needs to associate each file with a link, so copying it over will not associate a link.
Delete the files and try importing.

Why is it so impossible(in the iphone) to share files with other devices?

i want to buy an iphone 4 but this sharing issue is struggling me down>>>>>please i want help because sharing is very with other devices like nokia is very important to me.............

File sharing on smart phones is generally through an app like Dropbox or similar. iPhone also provides file transfer via iTunes in many cases. On a non-Smartphone, file-sharing is generally accomplished through syncing to a computer or by Bluetooth file transfer (though phone-to-phone transfer is not generally possible).
So, file sharing is quite possible, but it will probably involve using some computer or service as an intermediary if the phones involved use different operating systems or don't directly support file transfer.

Why is my iphone 4 saying not enough storage available?

Hello, when ios 7 came out I could not download it because I didn't have enough storage so I did not stress it. The next week I plugged my iphone in my laptop and it downloaded ios 7 and ever since then my iphone 4 will not let me take pictures, download apps, nothing and it keeps popping up not enough storage available, you can either buy more or delete some. So I deleted A LOT of my apps and pictures and contacts but still even with four apps on my phone it won't let me do anything. Does anyone know why? And I do not want to buy more storage because I am going to upgrade my phone this summer but still its very annoying, can anyone help me please? And thank you !!!

That's iCloud storage that it's talking about
Check Settings>iCloud>Storage & Backup.
Odds are what you see here will show a very small amount as "Available."
See here to learn about managing your iCloud storage.
~Lyssa

I have 18.1GB of storage availble in iCloud but is being told that my iPad cannot be backed up because there is not enough iCloud storage available. Why?

Why am I being told that my iPad cannot be backed up because there is not enough iCloud storage available when I have 18.1GB of storage available in my iCloud account?

You shouldn't be, but you would have to contact Apple support to find out what the issue is: http://www.apple.com/support/icloud/contact/. If you are outside of your free support window there would normally be a charge for the call but under the circumstances you could plead your case that you should not be charged.

Is there any external storage that is compatible with the ipad2

is there any external storage that is compatible with the ipad2

the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?

Wbadmin Insufficient storage available to create either the shadow copy storage file or other shadow copy data

Similar Messages

Maybe you are looking for