Wbdynpro abap - show document
hi folks,
can anyone provide me with a hint how to show documents - which are stored like cv02n or object services in r/3 databases - in a webdynpro for abap application????
kind regards,
oliver
Hi Oliver,
did you try LinkToUrl (http://help.sap.com/saphelp_nw04s/helpdata/en/49/e8884118aa1709e10000000a155106/frameset.htm)?
Regards,
Heidi
Similar Messages
-
Hi
Im SAP-BW consultant. can anyone send me the ABAP debugger document for debugging one large ABAP program to
[email protected]
Txs
KumarHi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
· Setting and deleting breakpoints
· Setting and deleting watchpoints
· Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC <> 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<<br /> Less than
<=
Less than or equal
=
Equal
<>
Not equal
>= Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Reward if usefull
To create a logical link between watchpoints:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to open the watchpoint display.
Set the Logical operator between watchpoints option.
The default value is always OR . -
Hi,
I'm using Oracle9i and I would like to show a document from Oracle Forms.
There is no problem in showing it generally, using web.show_document. But the document is displayed in a new browser window.
And the problem occurs when I try to show the document "inside" the form, I mean in a form window (or in a form field as in Forms 6), not in a separate browser window.
Do you know how to solve the problem?
Thanks,
JolaJola,
web.show_document() cannot show documents within a form. You could use a JavaBean to stream documents, but I am not aware of a bean that does render OLE documents or other binary formats so it can be used in Forms. The option you should go for is to use the separate browser window.
Frank -
Adobe cannot show documents in my Firefox Browser version 16.0.2
For the last few months I have not been able to open and print my bank statements. I have updated both Firefox and Adobe. When I click the bank's statements link, it opens a new window, but the window is empty, and I get an Adobe box that says "Adobe Reader cannot show documents in this browser. We are sorry, but Adobe Reader is unable to show documents in this browser configuration. Please use your browser to download this file and open it in Adobe Reader or Adobe Acrobat. To avoid this message in the future, many browsers provide a way to turn off certain add-ons, and some are able to show this document natively. Please contact your browser vendor for more details."
Hello udvardy, it is true, see [https://support.mozilla.org/en-US/kb/pdf-files-are-blank-and-cant-be-downloaded-mac#os=mac&browser=fx16 PDF files are blank and can't be downloaded on Mac]
[https://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them#os=mac&browser=fx16 View PDF files in Firefox without downloading them]
try the excellent [http://www.schubert-it.com/pluginpdf/ Schubert|it PDF Browser Plugin] (it is only for mac)
thank you -
ChaRM - Authorization Object to show documents in CRM_DNO_MONITOR
Hi folks,
does anyone know which auth. object or other prerequisite is needed to show documents in transaction CRM_DNO_MONITOR?
To our needs the SAP ChaRM default roles do not fit. So I am building roles from scratch (basically).
Auth. trace via ST01 did not show anything relevant when executing tx: CRM_DNO_MONITOR.
Sol Man 7.0, ST400-0017, BBPCRM500-0012
Any help is appreciated.
Thanks in advance.
Edited by: Christian Kaunzner on Mar 9, 2009 10:28 AMHi,
I would still recommend to use SAP Standard roles as backbone and build on with your custom roles. Make a copy of standard roles. Creating from scratch would again have the same auth. objects that are available in standard roles.
>
Christian Kaunzner wrote:
> To our needs the SAP ChaRM default roles do not fit. So I am building roles from scratch (basically).
Can you let us know, how you want your roles to be defined?
Feel free to revert back.
-=-Ragu -
hi,
Can Anyone Share with me some good ABAP mapping Document..
ThanksHi,
Please refer these links and weblogs.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
http://help.sap.com/saphelp_nw70/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
Check this thread
Re: ABAP Mappings in SAP XI
Hope these links will help you to close these threads.
Regards
Aashish Sinha
PS : reward points if helpful and don't forget to close thread. -
Archived Deliver not showing Document FLow _RV_LIKP
Folks
I have started archiving for delivery object. I am able to successfully archive one document and can view the document in SARI and the only issue i am having is the when i open the archive document the ICON which shows "DOCUMENT FLOW" is not click able so user is not able to see the document flow to find the Sales Order/STO# it was created from.
In my customization for RV_LIKP under the setting " Archiving Control for Delivery" i have put residence time as "5" and RNO "0"
Also what is the RNO field stands for .
ThanksHi Andy,
Go through the link given below.
http://help.sap.com/saphelp_40b/helpdata/pt/b7/19752690e211d1a5510000e82deaaa/content.htm
The last line looks important.
Deliveries should be archived before sales documents and billing documents. This sequence is a result of the way the documents are linked via document flow.
Hope it helps,
Regards,
MT -
Hi All,
Plz let me know where can we get the ABAP delta documents, as i have to prepare the list of all ABAP (Eg: keywords) changes made to SAP from 3.1H to ECC 6.0.
Thanks.Read the following notes for changes in ABAP syntax:
178482 - Rel. upgrade from 3.0 to 4.0 for customer programs
178452 - Release upgrade from 4.0 to 4.5 for customers programs
178725 - Release upgrade from 4.5 to 4.6 for customer programs
367676 - Release upgrade from 4.6 to 6.10 for customer programs
452229 - Release upgrade from 6.10 to 6.20 for customer programs
689951 - Release upgrade from 6.20 to 6.40 for customer programs
857904 - Upgrade from Release 6.40 to 7.0:
They contain the deltas to the previous version.
Markus -
Hi Everybody,
Can please some one help with the ABAP KT documents. We need to take the knowledge transfer from our new client. We need the questionaire that needs to be asked to the vendor who is already serving the client.
Would appreciate if some one can help at the earliest.
Regards,
Chitrasenhi,
when u are assigning to a new project some one may get out of the project .. at that time..they will explain the project deliveries and conditions of the project and they will give the object coding standards and explain briefly about the objects....
reward points if useful,
venkat. -
Showing document and document explorer taskflow in same page
Hi all,
I am using webcenter portal 11.1.1.8
I want to show document explorer taskflow and same content in same window.When user will select any document, same document will display in below.How to achieve this?See if the following doc helps you to render the document inside document explorer taskflow :
Configuring the Dynamic Converter Component
http://docs.oracle.com/cd/E28280_01/webcenter.1111/e12405/wcadm_documents.htm#BABBCAHI -
Control for showing documents like image
Hai
I am using flex .In Flex is there exist any other control like mx:image to show documents like image in image control .If anybody knows the solution pls help me
RegardsAdilson,
Check the copy controls delivery to billing in transaction VTFL.
Select the right combination one and check at header level whether the reference number field was filled or not.
And also check at the item level DATA VBRK/VBRP routines, whether there was any custom routine defined ,and there was any custom code thats clearing the reference field.
Regards,
Ajai. -
Show document content from webdynpro abap
hi folks,
i already posted such a question, now i try again - maybe someone has a hot tip for me.
i hat der content of a document (e.g. JPG oder TIFF or WORD) in a table of type binary data.
Now my first suggestion was create a url with dp_create_url and dne navigate with element "link_to_url" to that generated url, which is in format sapr3:// , but that won't work.
has anyone an idea how to show this file-content in a webdynpro abap application.
kind regards oliverHi Oliver,
You can show files of all kinds by using an iframe and placing the file at some place inside of the MIME repository. If the file is somewhat static, just add it to the component (right mouse click at the component in the tree at the left side in se80). Just enter name of the file (if the file is part of the component) or the path within the mine repository inside of the URL field. If you don't add http:// something like that in front of the URL we assume that it is a path in the mime repository. This should work for LinkToURL as well.
Another nice option is to add the file to the response. Just call method cl_wd_runtime_services=>attach_file_to_response() and specify all the parameters.
Kind regards,
Thomas -
Report to show Document Templates linked to what business partners
Hi all,
I want to write a report to show what default document print templates are linked to what business partners. eg. InvoiceTpye1 is used by Customers 1,6,and 8 etc etc.
However I am not aware of what tables hold this info. Does anyone know?
Many thanks in anticipation
DamianHi Damian,
The table you are looking for is: RDFL
Thanks,
Gordon -
Dear All,
Iam getting there are certain document which is cleared but not showing in FBL3N . but same i can see in BSAS table. what will be the reason. Date & everything i given correctly. This is something system issue.
Pls help. Good solution will be rewarded.
Thanx in advanceHi,
Check your layout and ensure that filtering is not there
check in your dynamic selection in FBL3N and see that nothing is there
Try and reply
regs
sunoj -
%SI_DOCUMENT_NAME% in Edge 3.1 not showing document name
We have a problem with the placeholder %SI_DOCUMENT_NAME% not being populated with the document name, instead it only shows the placeholder itself in the mail, i.e. "%SI_DOCUMENT_NAME%"
How can I fix this?What reporting tool are you using when you schedule reports?
search our notes for that %SI_DOCUMENT_NAME% also try SI_DOCUMENT_NAME. I think there were some known issues with this
Regards,
Tim
Maybe you are looking for
-
i am trying to change a sim card to this phone but an error comes up with an itunes icon an plug and the pad lock
-
How to import MySQL Driver in Jbuilder
I am creating a GUI application using swing with the help of JBuilder. I have used MySQL as Database. For connection it to java I've used MySQL J-Connector Driver. But I am not being able to import that driver(classes) in jbuilder. When i run the app
-
ICloud mail not delivering mail from specific address
I'm having a recurring issue with iCloud mail. Email alerts from my home alarm company are being intercepted on Apple's server side, and are not being delivered to me. I called Apple Support more than a week ago to report this problem, and the repres
-
Can i buy ipad 4g here in US and use it in the philippines?
can i buy ipad 4g here in US and use it in the philippines?
-
Arabic text direction and language in Illustrator CC 2014
I have a rich text format document in Arabic and the text direction is from right to left. when I copy the text in TextEdit software and paste it in illustrator CC 2014 I can change the characters to Arabic but the text direction in from left to righ