WBS Account assignment problem in Sales Order
Dear Expert,
I have one material whose I am creating sales order.After pricing , when I assign respictive WBS element as account assignment It is picking default Project name and which is not respective of what i want to assign.Can anyone put some light on it.
Actually I am PS consultant , so don't know is there is any config for that in SD.
Regards
Edited by: astosh on Apr 14, 2011 10:10 AM
Hi Ravi,
it is due to profit centre accounting / costing is active, it is better to get it clearified from a FICO consultant
regards,
Santosh
Similar Messages
-
About account assignment group in Sales Order.
Hi gurus,
I am working in SD for the first time and I am facing below problem
1. Material code was created with account assignment group (MVKE-KTGRM) as blank (Sales Org 2 view)
2. Later this material was entered in Sales Order.
3. Subsequently Sales Order BOM and Production Order were made against this material.
4. We maintained account assignment group in material master after creation of Sales order but account assignment group was not updated in Sales Order.
5. Now the field is gray out or non-editable is there any way by which we can maintain account assignment group in the sales order.
6. As the field is non editable we are unable to do Invoice by VF01.
Is there any way by which we can maintain account assignment group in Sales Order??
Edited by: Deepak Kulkarni on Mar 6, 2012 2:09 PMHi
As you have mentioned that you have maintained the acct assignment grp in the material master after the order was created, it will not appear in the sales order item already created and it will only reflect in new orders and changes to existing orders for that material.
Proposed solution:
If it is order related billing that you are doing, then goto VA02 and delete and re-enter the item with same material and qty.
The account assignment group will appear.
If the item is delivery related and if the delivery has already been created but PGi not done, then delete the delivery and then delete the item in the sales order and re-enter the item as told above. If PGI also done, then reverse the PGI, delete the delivery and re-enter as suggestd in above scenarios.
The account assignment group will appear in the billing document document tab in item level.
Regards
Madhu -
Purchase order creation - Account assignment group C (Sales Order)
Hello Gurus
During the purchase order creation in Me21N, account assignment category C (sales order) is available. In which scenario we will use it. When I assign C system is asking for a GL account. Why system needs a GL account, and how the posting will be at the time of goods receipt. Thanks for your help in advance.Hi,
Creation of Purchase Order with t.code: ME21N with account assignment category C (sales order) is used for Time and Material Expenses with third party scenario and you need to enter sales order number and respective G/L account . In this scenario 1st a sales order is created with a material( material created DIEN material type) & then purchase order created with respect to sales order.
Here you provide service to your customer and this service you procure from your vendor, you just play middle role for providing and getting service.Standard DIEN material type designed for Sales usage only, so you create sales order for service material.Service master is used to get service from vendor with item category D with proper account assignment category as C
Example:
Material type DIEN is used for when you offer "SERVICE" to your customer.( The steps are (VA01,VF01,VF04,F-28), If u used HR module( you can used with sales order with t.codes are: CAT2,CATS_APPR_LITE,CAT7,PR05,PRRW,PRFI)
Service Master records(AC01)ESM is used when you procure "SERVICE" from your vendor.( Steps are: ME21N with Item Cat. "D" with Acc. ***. Cat. "C", ML81N,MIRO & F-53).
Regards,
Biju K -
Material Account Assignment Group, in Sales Order Mass Update
Sd Experts,
We just went live, our consultant updated Account assignment group at the material level but did not updated existing materials. When we caught the problem and updated exisisting materials there were some existing orders already created. Which now I am getting an account determination error due to this field being empty at the material level.
We have some sales orders that I need to update but they are just too many, currently I have been fixing them thru VF02, for to the material and update manually.
Does anyone has any idea how to mass update this field for all existing orders, to update "Account Assignment Group" field automatically
Your help will be greatly appreciated.Hi
In Mass transaction choose object type as #BUS2032,after executing in the next screen from the tables choose#Sales Order Item Data, and from the fields choose#AcctAssgGr (MASSSDHE)-MASSSDHEAD_S-KTGRD, now execute to find fields Sales document and Sales Document item , here load all the Sales Orders for which the change is needed along with the items for which the changes are needed execute again to find the next screen with Sales Documet, Sales Document item and Account assignment which needed to be changed,now select the entire block enter new values in the Account assignment box in the above, click on the 'Carry out MAss change button ' and then save, it will take some time basing the change tobe carried and issues a log as to how many documents were changed
Hope this is clear,please do a test run before.
Regards
Chandra -
An incorrect default value of account assignment group in sales order
I created a new sales order; however, the default value for account assignment group is not the same value maintained in customer master.
Any idea how could this happen?have you checked user exit MV45AFZZ? Maybe there is a coding inside, changing the default value when creating a new sales order.
regards
Ralf -
Mass change of account assignment group in sales order
Dear All.
We have created a new Account assigement group and assigned revenue accounts to it.When the orders are registered this data will flow from the master data automatically.Where as in the open orders i need to make the changes manually.Is there a provision in std SAP to Mass change a filed in sales order .Like we do in MM17 or XD99 .Kindly let me know.
Thanks in advance .
regards,
K.VivekHi,
Go to XD99,
1. Select the table ie KNVV in the tables tab, select the fields tab and select the fields u would like to change for eg Acct assignment group
2. Execute the report
3. U will come to the screen where u can restrict the entries.
Enter the criterion say
Cust: Test 1
Sales Org 8000
Dist 08
Div 08
4. Again press execute
5. Enter the new values you would like to have
6. Now select columns of the new values and press carry out mass maintainence button in the new values area
7. Press Save
8. u will then receive a success message
Best regards
Mahesh -
Account Assignment field in Sales Order (Internal Order)
Hi SD Guru's
In my sales order i have two items with two different item categories....for the 1st item in the account assignment field i can see internal order number field, in the 2nd item i cant see that internal order field. What do i do? Any customization settings?
Regards
RaviHi Ravi,
it is due to profit centre accounting / costing is active, it is better to get it clearified from a FICO consultant
regards,
Santosh -
Account assignment "C" and sales order
Hi All,
While making service PO with account assignment "C" and Item category "D", Sales order is mandatoey in item detailes.
Can you all experts tell me what impact it has on sales order...?
Can we see a report where these two i.e service PO and Sales order are linked?
What accounting impact is has?
Regards,
SatyendraHi,
When u do SES,The accounting docs are"
May be Consumption account (or what u define Account): Dr
GR/IR: Cr
& After IV, accounts are:
GR/IR: Dr,
Vendor: Cr
You can report in MB5S or ME80FN.
Linkage in OME9 and OKB9.
Regards,
Biju K -
Account Determination Procedure in Sales Order
Hi All,
I have a problem regarding account determination procedure in sales order.
When I create a new sales document, and go to menu Environment --> Analysis --> Account Determination, the information about the procedure is blank.
For your information, I already assign this sales document type to a billing type.
This billing type also already has an account determination procedure, which is KOFI00.
The G/L Account in VKOA also already been set up for the combination of Condition Type - Chart of Acct - Sales Org - Account Assignment Category in Customer and Material - Account Key.
But every time I create a new sales order, I cannot get the account determination procedure.
Anyone can please help me to solve this problem?
Thank you in advanceHi Surya,
Have you assigned Billing type For Ex: F2 or F1 to respective Sales Order Type in Sales Document Type controls VOV8.
Assign these F2 against Delivery Related billing and F1 is for Order Related billing.
Assign KOFI0000 to respective Billing Types F2 and F1.
And check, hope issue may resolve.
Revert if u have any query.
Regards
Durga sana. -
MILESTONE BILLING- Mile stone assigned to multiple sales orders
Hi,
My user has sales order in which he has used Mile stone billing
The Billing is being done in two shots - 60% once and the second time 40%
60% has already been invoiced and the 40% is creating a problem and they want the sales order to be closed
In one of the custom reports- it says that the 40% (mile stone number) is assigned to multiple sales orders and so the sales order cannot be confirmed
I am totally new to SD and so request to kindly explain high level concept and also provide the solution
Thanks,
SSHi,
Is your line item in sales order assigned to wbs elements?
If it yes?
check milestones may also comes from it- check with PS consultant-
you can also check milestome number and billing plan number- if you display milestone
Use CN41 transaction to check sales orders assigned to WBS element
uou can refer Table: FPLT
ICN53n-report
Thanks
Buddi Chidambaram -
How to make default account assignment category in planned order?
Scneario Description:
1. Sales order for a configurable parent item is created in ERP & order BOM is changed & transferred to APO. In APO MRP run takes place for that parent item, which creates a planned order with account assignment category "M" (M:Individual Customer w/o KD-CO.
2. Now based on the dependant requirement generated for parent item, MRP takes place for one of the child item in ERP & purchase requisition gets created for child item.
Question:
1. Can anybody help me how i can make default account assignment as "F" (F:Order) in the planned order of parent item?
2. PR created for child item also has default account assignment category as "M". we wish to change that to "F".
Thanks & best regards
Hemchandra & Sandeep MandhanaHi V. Suresh,
The account assignment category maintained in the requirement class for parent item is 'M'.
No account assignment category maintained has been maintained in the requirement class Semi-finished component (this component is sent for subcontracting).
The business process is as follows:
1. Create Sales Order for Parent say ME_PARENT.
2. Order BOM for ME_PARENT is created and subsequently cifed to APO.
3. PP/DS heuristic is run for ME_PARENT.
4. MRP for component ME_COMP is run in ERP.
It can be seen that purchase requistion for ME_COMP has a/c assgn category as 'M'. It seems that the ME_COMP has inherited 'M' from ME_PARENT.
We would like to have no a/c assgn category for ME_COMP.
Any pointers?
Regards,
Sandeep -
Spliting up the G/L account in time of Sales Order creation .
Hi,
I am an ABAPer. Please let me know using ABAP code how to split the G/L account in time of Sales Order creation for a Payment Card.
Shyamal.Hiya,
Don't have the system before me, but I think the approx path is:
IMG --> Controlling --> Profitability Analysis --> Master Data --> Valuation --> Define and Assign Val Strategies (I think it is KE4U).
Look up the Val Strategy assignments and look for anything with Record Type "A".
Secondly, look for:
IMG --> controlling --> Profitability Analysis --> Actual Postings --> Active transfer of Sales Order Data
Under here, look for any assignments of Condition Types to Value Fields and Quantity Fields to COPA Value Fields (Qty.)
If these are present, they must have been put there on purpose. You should NOT JUST GO AHEAD AND DELETE them. Check why these are there and then check why these are flowing into your COPA report.
Normally COPA reports are defined by Record Type. If you used Record Type "F" in your reports, you should always get the proper PL report. However, if you assigned a combination of "F" and "A", you will find that your Order data is flowing into COPA along with the Billing data. So the third check point should be your report definition. Call up the form for the report you are running using transaction KE35 (Change Mode). Check the definition of the Sales quantity, etc. and look for any flows with Record Type "A". Since the form may be used by others, it is not a good idea to delete a form as it is. Copy the form into another and change the new one. Delete the "A" assignments and see if you get the correct result.
Broadly these are the areas you need to check. But COPA is vast and there could be other areas as well (e.g., KEDR Derivations, or some custom programs (SMOD)) which can trigger flows to COPA Value Fields.
Cheers. -
Problem about sales order stock stock transfer and batch determination
Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
Can anybody help me? Is there anything else I need to do? Thanks very much.I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted from SAP.
-
Account determination analysis in sales order
Hi there,
in a sales order processing (VA02/VA03) I'd like to know which accounts will be determined prior to invoincing it.
I find the "account determination analysis" tool through the menù path: "Environment" -> "Analysis" -> "Account Determination" (FCODE = 'KTPR'), but it shows an empty screen
The same tool shows the desired data during an invoice processing (VF02/VF03).
How can do to see the account determination analysis in sales order processing, and not in invoice processing ?
This tool shows an empty screen even if the order is invoiced, or not.
So I'm asking: which is the meaning of this tool inside sales order processing ?
Hope I've explained correctly my problem.
Thanks in advance.
AndreaHi Nagaraj,
the sales order amount is > 0, but the account determination analysis tool still show me an empty screen
It seems this tool runs only into invoice processing.
I try to follow the ABAP debugger and at a certain point it uses the "account determination procedure" (KOFI00), that in the sales order is missing ... maybe this is the problem ...
Best regards
Andrea -
Problem with sales order and Service order
Dear Guru's
We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
Thanks and Regards,
Deethya.CLOSED
Maybe you are looking for
-
How can i copy the books through iTunes?
in the above picture i can see the copy option but i cannot paste that file in my computer.how can i save that file to my computer?is there any way using itunes?
-
Tabular Forms and Select Lists
Hi, I have an updateable tabular form, and one of the updateable columns I want as a select list. I need the SQL that populates this select list to be based on a hidden value in the tabular form. Is this possible? Cheers Simon
-
I am creating a registration form with payment options in Adobe Flex . There would be 2 payment options, Cash and Credit card. when a user selects an option he/she has to fill in some details. I have created different states for credit and card optio
-
***
-
When i try to install Oracle 8i on windows 2000 which compatible to windows 98 it is giving me "invalid staging area" can anybody help me please Regards Pavan