WBS assignment in Network

Hi All,
We have developed new report with copy of std report-KALR and the output is coming as excepted in business requirement but the report execution performance is very slow.
So i have discussed with technical team about this performance issue and the performance issue coming becuase of below logic we used in repor to derive the WBS information of network.
If object id = Network (NTW) , we passed the object number (OBJNR-COEP ) in table AFVC to find the details of assigned WBS in network.
Can you please help me , is there any other way to derive the assigned WBS details in network.
Thanks
Risha

Hi,
Are you incurring any cost directly on your network? Validate the check; whether it should be NTW or NWA.
Regards
Sreekanth

Similar Messages

  • Assign activity type  to WBS element  without network

    Hi There,
    I have a customer business scenario where I have to assign activites to WBS element  without network.
    can any one help me on that..
    Thanks,
    Paritosh

    Hi Thomas,
    Thanks for your information. I have created customer Project with one network and multiple WBS.
    But another issue related to project RBB & DIP profile. I have a scenario it like quantity should be updated from DIP profile in quotation and billing price should take from sales condition record.
    After booking activity base cost directly from KB21N and it is showing in line item. Still when I am trying to run transaction with DP82 to update sales base price system is giving me a message "No expenditure item found" although in WBS level showing all the cost/quantity.
    Can any one tell why I am getting message and how to correct it?
    Paritosh

  • One wbs and one network

    Dear All,
    Recently I got the answer in forum that check Network Profile and instaed of Project ID give WBS Element in configuration. What does it mean ? I dont find any Project ID field or WBS field in Network Profile configuration settings. Please advice.
    Regards,
    Bekele

    I think it is for-Stipulates that when you create an activity, the system displays a list of all networks assigned to the WBS element or the project definition.
    It may not restrict us from creating more than one network under a WBS Element.
    Please confirm.
    Regards,
    Bekele

  • Need to Create a Check for Plant in WBS & Plant in Network

    Dear Guru's,
    While creating Project (CJ01) my users are creating in a Plant, and while creating network for the same project/WBS, they are using different Plant Code.
    Since my Profit center is related to the plant in CJ01,
    and because of wrong Plant in network, all my PR/ PO is going in a different Profit center, which is creating a huge problem while auditing.
    I need to Create a Check for Plant in WBS & Plant in Network...!!
    Kindly suggest me the ways to do it and how to do it...

    Hi Deepa,
    The Check you are trying to create between Plant defined at Project def and network level that should be same can be achieved through validation at the network level by using a user exit at network level.
                    While creating the network you can change the plant value not equal to the value at proj def/network profile may be one of the reason is since the network type is defined for more than one plant (OPUV).
                    While creating validations at network level we do not have the option of setting the prerequisite/check  using WBS or Proj def fields (i.e. PROJ-, PRPS- fields)    so we need to create a user exit at the network level.
    I am not sure but logically u can have a user exit for both prerequisite and check steps of the validation.
    You need to create the user exit in program ZGGBR000.
    Please take help from your Abaper for the same.
    OPSI-Network header-Validation- Step - Prerequisite u2013 Check u2013 Message.
    Prerequisite
    If Proj Profile = u2018XXXu2019 and Network Profile = u2018XXu2019 (or as per your logic if need be use a exit)
    CHECK.
    PROJ-WERKS = CAUFVD-WERKS   (This logic needs to be defined in user exit and set the same user exit at the check.)
    Once you define the user exit in ZGGBR000, it will be available in the tab u2018exitsu2019 at the Prerequisite and Check levels.
    The name of the form pool (e.g., ZGGBR000) that contains your user exit must be stored in table T80D.
    It is important that you make declare the code generation program for your user exit; how many and what type of parameters you are using for the user exit. You do this by entering your newly defined user exits in the form routine GET_EXIT_TITLES. Found in program ZGGBR000.
    Check with your Abaper to check on all the aboveu2026
    Message:
    Plant at Network level should be same as at Project def level.
    Hope it helps you,All the best..
    Regards
    Vinayak.

  • WRT54G Wireless Router Will Not Assign a Network Address

    A Linksys WRT54G router will not assign a network address when I access the router using a Linksys WPC600N wireless card. I have the same problem accessing the router with a TRENDnet TEW-621PC wireless adapter. Both wireless adapters are assigned network addresses when I use other wireless routers. Also, I have no problems being assigned a network address when I access the WRT54G router in question using an old 2WIRE 802.11b wireless card.
    I have tried "Repairing" the connection, I have used ipconfig to "release" and "renew" the connection. However, each attempt fails to have a DHCP address assigned.
    I am a visitor at the work location with the connection problem, the router works for others without any issues.
    Thanks

    Well in such case .... you can try few settings on the wireless adapter ....
    If you are using WLAN monitor .....
    Click start >> All programs >> Linksys wireless monitor >> Click on "Profile" >> Delete all profiles >> Click "New" >> Type in the wireless network name >> Click next >> Configure the rest of the wireless settings same as in the router ...
    At last point it shows .... all the configuration settings ...reconfirm that  >> Click on connect ot a network & reboot the computer ...
    After reboot see if it shows connected or not....
    You can also use Static Ip in the configuration ....

  • WBS assignment in Sales order

    Hi,
    I wanted to grey out WBS assignement column in sales order for a particular line item once there is any subsequent document created for that.
    Any suggestion...
    Cheers !!

    Hi Abhinay,
    Two options,
    1. By using Standard Transaction variant by SHD0,
    2. Use user exit in sales order to put a check and make WBS element inactive based on your criteria. The Form for User exit you can use is MV45AFZZ under this program check for suitable user exit.
    Thanks,
    Raja

  • Assignment of networks / activities and WBS elements

    hi experts,
    I have some basic doubts... can any ony clarify these:
    1.can a WBS element be assigned to several Projects.
    2.  can a network be assigned to several WBS elements.
    3. can an activity be assigned to several networks
    4. can an activity element be assigned to several network activities.
    thanking in advance.
    regards,
    priyanka
    Edited by: priyanka on Jun 29, 2008 10:54 PM

    Hi Priyanka,
    Yes, Iam sure that a single network can be assigned to more than 1 WBS at a same time.
    A WBS can be assigned several activities even different networks also if required, but an activity can be assigned to one WBS element only. Once activities are assigned to WBS elements, you can exchange data between activities and networks. For example activities can inherit statuses from the WBS elements they are assigned to. Conversely you can total up project activity dates to WBS elements or can check funds allotted to activities against WBS.
    A single or several networks can be used in the project structure, to map individual aspects of the project such as activities that are linked to each other via relationships. The relationships between two activities define the logical sequence of the activities (predecessor u2013 successor relationship) as well as their time dependencies. Activities of different networks can also be linked to one another. Advantage of network technique is that, system can automatically determine planned dates for each activity and entire network on the basis of duration of individual activities and their chronological sequence.
    Priyanka, I hope this may clear your doubt . .
    reward points required please . . .
    Regards,
    Dhruv Kumar Malhotra

  • Effects of Goods Receipt for PO with A/C assignment to Network?

    Dear All,
    Does anyone know what is the effect in the system after I posted a Goods Receipt for a Purchase order item with account assignment to a Network (Project Systems).
    The account assignment is 'N' in the Purchase Order.
    Best Regards,
    Junwen

    hi,
    i know only assignment with "P"
    -> it has an effect of the Budget and liability
    (values in table rpsco)
    Andreas

  • WBS assignement in Asset Master & postings Impact on business processes??

    Hi all,
    We have the option in asset master record to give the WBS element, so whenever we procure an asset we will procure it to a project so we planned to give wbs in asset master record.
    we even calculate dep for the project. and we will transfer asset from one project to another.
    by considering above all if we assign wbs in asset and procure it to project and calculate dep. does it leads to any other implications. we tested the above cycle its working fine, but we are unable to vizualise other impacts.
    so somebody please guide us to goahead with this opttion.
    thanks & regards,
    shashi kanth.

    Hi,
    Typical use of this is to do a statistical posting to the WBS and a "real" posting to the asset.  It is a nice feature, as you can tell and report on your origins of assets by WBS. 
    Good luck!
    Tammy

  • Wrong WBS assigned in Purchase Requisition

    Hi Gurus !
    I was creating Purchase Requisition for a Project but by mistake took the WBS of another project in CJ20N ( Project Builder ) , and the PO has been made , even the GRN is also over . When Iam trying to open any S_ALR report it is showing 2 networks with different activities in one project.
    I.R. ,Invoicing and GRN can't be reversed as booking period is already closed .
    Please tell me how to correct it ? ?

    Hi Dhruv!
    Only Solution of this Problem is Pass The Journal Voucher. Becase every step is not in your hand ..and for that you have to take the permission from your RPO Head (Mr. Sreevastva and Mr. Nahar)..So dont think about whole process anly try to close current issue with Passing the JV.
    Definetly this will not hit your JSR margin.
    Rewards Point because this is  the best Answer.
    Regards
    Dr. SMITH

  • WBS assignment to sales order

    Dear Friends,
    I want to make WBS mandatory in sales document> Item> Account Assignment.
    Pls tell me by what all ways can this be done?
    Thanks a lot.
    Warm Regards,
    Mili

    Hi,
    Ther are two ways for you to make this field as mandatory.
    1.Goto VOV8 T.Code.Enter your order type.
    Details.
    In "Transaction flow" tab, there is a check box called "Incomplete messages".
    Check this box.
    Save.
    If you do this all the items in incomplete procedure are to be filled with values,if you leave any thing blank then order will not be saved.
    2.Goto SE51 T.Code.
    Enter the Program name as "SAPLKACB".
    Enter the Screen number as "1006".
    Select the Layout editor tab.Click on Change.
    Screen painter screen will be opened.
    Double click on "WBS element".
    Attributes screen will be opened.
    In this,under program tab,Select "Input" as "Required".Change this field from "Possible" to "Required".
    Save.
    Regards,
    Krishna.

  • Assign the network code with BAPI_ENTRYSHEET_CREATE

    Hi,
    I want to set the NETWORK CODE of the PO to every services that I insert in the entry sheet created with the BAPI_ENTRYSHEET_CREATE.
    Now I am able to set the NETWORK CODE only for planned services but not for services that comes from contract linked with the PO in this case the services are inserted in the entry sheet with the WBS code of the contract.
    How can I resolve this problem. Is there any parameter that I have to set in the BAPI?
    Thanks in advance
    Luca

    Anyone could answer to my question?
    Thanks
    Luca

  • PS document without WBS assignment

    Hello all,
    There is some inconsistency in asset and inventory report because there is 2 PS documents were created (via CJ8G) with a WBS which was deleted after the creation of these 2 documents.
    Now after WBS deletion, the documents have no value in WBS element field !
    I do not succeed to know how this WBS was deleted despite the fact that there are already 2 open documents assigned to it.
    But now the problem is how to correct these 2 accounting documents with new WBS element to have correct values in the report ?
    Is there any transaction to correct PS document to update WBS element ?
    Thank you
    Edited by: Tarek AYACHI on Jun 10, 2011 10:37 AM

    Hi.
    I had some problem similar to this. You cannot change FI documents.
    But you can update PS data.
    1. Use RKACOR20 program to delete old CO documents relevant to your 2 FI documents.
    2. Create CO substitution for COBL-PS_PSP_PNR.
    3. Repost FI documents in CO Area by OKBA t-code.
    Best Regards,
    Tony

  • Assignment between network , activity , person , planned number of hours

    Hi
    In CJ20N , we are doing person assignment against activity
    Against activity , in internal tab , we are entering the planned no of hours in the field Work
    Similarly , against each person , we enter the splitted time
    I need to know , in which Table , we can find the relationship between network , activity , person , planned number of hours (at that person level)
    rgds
    sandeep

    Hi Sandeep ,
    AFVC, table for activity
    KBED, table for main capacity.
    KBEZ, for Split
    KPER, person assignment of each period.
    There is a correction report ZKBED_DEL of note 542941, You get more details of the relationships of the tables above, if you view (or debug) the codes.
    Kind regards,
    Zhenbo

  • WBS assignment to a document

    Hi friends,
    is there a FM that checks weither a WBS element (VBAP-PS_PSP_NR) is assigned to a sales order/ Contract (has an entry in VBAK/VBAP). (SAP 4.6C)
    Thank you for your help !

    Solved there is a view for this V_MPAA

Maybe you are looking for