WBS data distribution for IDOC-PI-JDBC with system status 'CRTD' not working.
Hello Experts,
I am busy with a project where the PS project creation and updates should be transfered to the external legacy system through IDOC-PI-JDBC scenario.
I am using the BAPI_PROJECT_MAINTAIN for this process. This scenario is working fine with the projects system status released (REL).
If the system status is Created (CRTD) then no idoc creation happening therefor no data distribution of work breakdown structure(WBS) to the legacy system.
Can anybody give me some suggestion of make it happening.
Thanks in advance.
Regards,
Antony.
Hello all,
I did it with the help of my abap developer.
We implemented a BADI, and from the BADI we created the idoc.
When the idoc is there the legacy system receive the data.
Regards,
Antony.
Similar Messages
-
Data elements for IDoc Segments to non-SAP system
Hi,
I need to create IDocs for transferring data to non-SAP system. When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system? Because there are many fields where the field attributes of SAP system do not match the corresponding fields of receiving non-SAP system.
Thanks in advance!!
Regards,
SriramHi Sriram,
When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
Is it custom segments .
Regards,
Madhu. -
Meta data Overview for Idoc Adapter
Hi All,
When i am trying to create meta data overivew for Idoc adpater of my source port, i am gettign this error "<b>Error: I::000</b>" and surprising abt this error.Any clues on this.........:) what should i do to do this??
Thanks in Advance
Cheers
VeeraHi All,
Once i have cross check RFC destination & Port and tried to load the meta data it was succesfully loded with out ant errors.The same port i have mention in Receivr Idoc adapter and tested the sceanrio File2Idoc.It is working fine.
I have solved the problem my own ( And the tricky thing is i have deleted and recreated RFC dest,Port from XI to R3).However what is the cause of this error??
Cheers
Veera -
Revision: 5445
Author: [email protected]
Date: 2009-03-19 17:47:57 -0700 (Thu, 19 Mar 2009)
Log Message:
Fix for - @copy tag for two methods with different arg lists not working.
Some changes for refactoring.
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19975
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19975
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja vaRevision: 5445
Author: [email protected]
Date: 2009-03-19 17:47:57 -0700 (Thu, 19 Mar 2009)
Log Message:
Fix for - @copy tag for two methods with different arg lists not working.
Some changes for refactoring.
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19975
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19975
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va -
my iphone 3gs with version 4.0 not works for apple TV what should i do?
Welcome to the Apple community.
You should update your iPhone software. -
What is the best soft wear update for a mac desktop with System Version:
Mac OS X 10.5.8It will depend on the actual model you have.
Upgrade Paths to Snow Leopard, Lion, Mountain Lion, or Mavericks
You can upgrade to Mountain Lion or Mavericks from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99 while Mavericks is free. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps. -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
The request failed with HTTP status 404: Not Found
Hi
BPC version we are using is : 5.0.502
When we Publish all reports using the steps below:
a. Log into BPC Web
b. Click on Available Interfaces> Select BPC for Administration
c. Under Web Admin Task Click Publish Reports
d. Select all of the reports and click the green check mark to publish the
reports.
I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
Event Type: Error
Event Source: OutlookSoft log
Event Category: None
Event ID: 0
Date: 12/8/2008
Time: 11:26:42 AM
User: N/A
Computer: BPCAPP
Description:
==============[System Error Tracing]==============
[System Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name] : AuditMgrService/SetAuditReportFiles
[DateTime] : 12/8/2008 11:26:42 AM
[UserId] : MMPlanning
[Exception]
DetailMsg : {The request failed with HTTP status 404: Not Found.}
==============[System Error Tracing End ]==============
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
If anyone knows the resolution for the above issue, please help me.
Thanks in advance
Sajeev AbrahamHi
Thanks for the response.
Below are the full contents of the error message pop-up.
( System.Expection: the reguest failed with HTTP status 404:Not found at
Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
[]args,sTRING[]paramnames, Boolen[]CopyBack)
at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
strApp,string strFiter)
url is given below
http://<HostName>/osoft/Admin/WebAdminMain.aspx
BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
Sql Reporting server is working.. I could connect using sql management studio.
Thanks -
Hyperlink with tracking applied does not work in PDF
We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.
Peter,
We'll look into that. We already do two separate PDFs for print and web, but
we are distilling both right now. Wouldn't be too much of a problem to
change to exporting the web version I don't think.
I did a test, just curious, is there a way to keep it from putting a black
box around the link on the PDF?
Thanks for your help! We appreciate it!
Beth
From: Peter Spier <[email protected]>
Reply-To: <[email protected]>
Date: Fri, 14 May 2010 13:24:04 -0600
To: Beth Phillips <[email protected]>
Subject: Hyperlink with tracking applied does not work in PDF
Distilled PDF uses Postscript which does not support hyperlinks and
interactivity. To make your hyperlinks in ID you'll need to export and check
the Include Hyperlinks and Include Interactiviity boxes.
Your printer doesn't need hyperlinks because they don't work on a printed
page. The requirements for print and interactive PDF are quite different, and
you may find you need to make two versions.
> -
"no serializer is registered..." error with a web service not working
I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
DanI'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan -
Converting WordPerfect to PDF with desktop printer tool: Not working
I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.
Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
Please help again and soon, :).
Date: Tue, 7 Jan 2014 11:52:08 -0800
From: [email protected]
To: [email protected]
Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
Re: Converting WordPerfect to PDF with desktop printer tool: Not working
created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Please do following
(A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
(B). If you have not installed Adobe Postscript driver yet then please install one as below:
How to Install PS printer:
1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
2. Select "Add a local printer"
3. Select "Use an existing port: LPT1: (Printer port)
4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
Adobe PS driver files:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
(C) Go to the printer configure port and verify your Adobe ID and password
1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
2. Click right mouse to open “Printer properties”.
3. Select “Ports” tab
4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
5. Click “Configure Port…” button at the bottom
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
When printing to PDF you will see below and an email is delivered to your email inbox. The converted PDF file will be stored at https//files.acrobat.com.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
Thank you
Hisami
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit versionSyncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows -
I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT -
Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
VikramSnippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does
Maybe you are looking for
-
Jabber for Windows SSO with CWMS
We've configured our WebEx Meetings Server 2.0 for SSO with ADFS 3.0 and it works in various browsers. The docs for Jabber for Windows say that it can do SSO to WebEx Meetings Server but there are no details in the configuration guide and I haven't
-
[solved] connectivity issues with new connection....
Hey all, I recently moved and had to get a new internet connection. Because cable is so expensive in the city (~$57/mon for 1.5MB Cable) I went with DSL (~$36/mon for 3.0MB DSL). I have the standard SBC DSL modem, connected to my wireless router. I
-
ITunes 11.1.3.8 and iOS 7 is there a problem synching?
I have heard there is so am reluctant to update to either as I connect my iPhone 4S to iTunes on my computer to update due to the wifi problems I have with the 4s since updating to iOS6?
-
BP creation to replicate in ECC
Hi Experts, I am working on bp replicatrion for crm to r/ 3 but while creating Bp in crm by tcode BP and selecting role sold t party, in the classification tab u201C The account group field is in grey mode. How to make this field active. Your help wi
-
Unable to use *Keygeneration* property
Hi All, I am trying to use Keygeneration property under remote system. Selected Keygeneration as QualifiedRange. and selected lookup field (Say Department Number) but i am not able to see any lookup values in the qualified range property. Finally i