WBS element integration with Trade Claims Management Module

Hi All,
anybody knows if Trade Clams Management module of CRM is integrated with management of WBS elements?
We actually want to post the amounts paid to customers through Trade Claims Management into CO-PA; we're trying to understand if using WBS element is a viable solution. Moreover if this is the case i'd be curious also to understand how COPA posting of accruals would work.
Regards
C

Similar Messages

FI/CO integration with PM, PS, MM modules

Hello,
Any body have information about ' FI/CO integration with PM, PS, MM modules
Could you please some explore above topic
Thanks,
Alex

HI Luciano,
It works as designed because of the following reasons:
1. The WBS ID in ERP system must be unique.
2. The phase-id in the cProject is NOT unique, you have e.g. same phase-id for two phases.
That is why the replication does not use the phase-id to create the WBS ID. The internal ID of phase is (default ID during creation of a phase) is used for replication
Though there is a Badi method let you change the the WBS ID, but I would not recommend you to do it because of above reasons.
Kind regards,

Help required in finding out the tables for FS-Claims Management module

Hi All,
In FS - claims Management module, i need to find out from which tables we can fetch the following fields,
INSURED             : insured person
DESCINSURED     : Description of insured person
CLAIMANT     : person eligible for benefits
DESCCLAIMANT     : Description of insured claimant
OUTSTRES     : Outstanding reserve
PAID             : paid amount
INCURRED     : paid amount + outstanding reserve LOSSDESC     : loss description
Thanks & Regards,
Anil

Hi Anil,
I was searching for the fields you mentioned using SE15 and came up with lot of hits. I thought, it would be good if you do the same thing and you can find the relevant tables as might you have good idea in this area.
I will tell you the procedure and I hope it will give you good results.
1) Go to SE15 (Repository Info System)
2) Click on "ABAP Dictionary"
3) Click on "Fields"
4) Select "Table Fields" and enter description as "insured" on the right hand side panel with Application component as "FS"
5) Click "Execute" (F8) and you will lot of hits.
You need to search through it to find relevant tables for your purpose.
Hope this will give you an idea.
Regards,
Vicky
PS: Award points if helpful

Queries on Advance Complaint Management Integration with Advance Return Management

Hello All,
We plan to implement Advance Complaint Management and integrate the same with Advance Return Management in SAP CRM, I have gone through the following links for the same
http://help.sap.com/saphelp_crm700_ehp02/helpdata/en/f8/d9632674dc4934a6ae266ce5e9f651/content.htm?frameset=/en/46/010af618cf3482e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_crm700_ehp02/helpdata/en/a9/4cf641ea7a497cae3fee1c251af1c8/content.htm?frameset=/en/f8/d9632674dc4934a6ae266ce5e9f651/frameset.htm&current_toc=/en/2e/b0da18dbe84ed9bdff9a5d6d91f531/plain.htm&node_id=44&show_children=false
http://scn.sap.com/thread/3408793
We need to implement the return to vendor functionality and I have the following queries
1) Does the return PO and delivery followed by the goods issue happen automatically? once the complaint transaction is released
2) Can Service Confirmation be integrated with Advance Complaint Management
Kind Regards
Atul

ok

Integration with SAP Records Management

Dear SAP gurus,
We are in SRM 7 EHP 1 with backend ECC 6 EHP 5. We are exploring PPS (Procurement for Public Sector) feature in SRM. We see that using PPS we can have integration with SAP Records Management. To be honest, I never see SAP Records Management so we want to confirm the functionality. Our legacy system require a electroning filing system, in which all documents related to procurement is scanned (whether it is document from system, or the one created manually), and then stored in a server in a pdf format.
Does SAP Records Management have this functionality in which it stores the pdf doc inside one server? If not, what is exactly the functionality of SAP Records Management?
Best regards,
John

Hi,
SAP Record Management is now known as SAP NetWeaver Folders Management.
Contact your NetWeaver consultant to imlement SAP NetWeaver Folders Management.
Some important links:
1. http://wiki.sdn.sap.com/wiki/display/HOME/SAPRecordsManagement
2. http://www28.sap.com/businessmaps/0531547C7FE54C6A9E9B5850836F5E43.htm
3. http://help.sap.com/saphelp_nw04/helpdata/en/f5/18fc39eb31a700e10000000a11402f/frameset.htm
Regards,
yaniVy
reward if helps

OBIEE Integration with Oracle Access Manager (OAM)

Hi All,
I am new to OBIEE and not familiar with Security part. We have one request from the client to have OBIEE Integration with Oracle Access Manager (OAM) through eternal identity management tool (OID/other LDAP).
I tried google and found some information, but non of them has Step-by-Step process.
Does anyone has document or know good portal which gives step by step information on how to Integrate OBIEE with OAM using external identity management tool?
Appreciate if you share the information.

Hi,
You can use this note/doc attached in the note to configure:
Oracle Access Manager (OAM) and Oracle Business Intelligence (OBI) Integration [ID 1217103.1]
Regards,
Jay

PS report: wbs element relation with PO, Pur Req. and vendor

Hello,
I need to build a report on WBS element which also shows PO number, Pur. Requisition, vendor details along with budget, actual, committements.
I found datasources that can provide informations except PO, Pur Req.
Can anyone help in providing a soln to build a relation between wbs and vendor to bring the correct PO and pur req related to wbs.
Thanks
Anima

Hi Sushil,
Which version of BW are you using?
If its BW 7, then look at the datasource 2LIS_02_ACC
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
Hope this help you
Anima

Java class integration with Oracle Identity Manager 9.1.0.2

Hello Friends,
I have a java class that is responsible for sending notifications, my question is how do the relationship of this class with the Oracle Identity Manager 9.1.0.2 so you can take the class and notify users when an application is approved or rejected.
Any recommendation for this process.
Thanks for the support
Edited by: JLK on Jun 12, 2012 5:20 PM

Hi
Java class integration with OIM happen through concept of adapters. You can go through OIM documentation of how to create adapters.
In your case you should create a process task adapetrs adn attach it on the Approved response code in your approval process.
Desingn Console --> Process management --> Process definition --> <Apprlication Process Ex: AD User>.
Alternatively you can also send notification using OIM OOTB email templates.
Regards
user12841694

WBS Elements upload with settlement rule& classification

I have created project profile & WBS elements with a BAPI bapi_project_maintain.
Now i need to apply characterstic values and settlement rules to those WBS elements.
I have been searching for a FM since long time.
I tried with LSMW also,it did not work.
Only way left to me is to write a BDC programs to full fill this.
If anybody has got some solution for this let me know.
regards
KTSS

Sreenivas,
I´m afraid that none of the 3 options is available via standard tools
I´m so sorry.
Rgds
Martina

CATS INTEGRATION WITH PP AND PM MODULE ( TO FIND ACTUAL MANPOWER COSTING THROUGH ACTIVITY TYPE)

Hi Experts,
We have a scenario like, Client wants to track the actual manpower costing through activity type ( Ex: How much hours an employee worked on a particular work center to produce an “X” product, So that his actual cost should be loaded on that product.
We have employee ( 1. Staff 2. Worker 3. Contract labor employee and apprentice from third party roll and staff and worker we plan to go with negative time management and for contract labor and apprentice will go with through cats.
Since we are not going to run the payroll for contract labor employee and apprentice, we just maintaining the employee data as a group ( Ex: Group A,B,C etc.. Each group consists 20 or 30 employees, According to system each group as one employee and according to us each group consists as 20 or 30 employee.
The Activity type as well cost center will be created by Co module, the same will be assigned in info type 0315, but still i want more input from experts on the same, since i am new to cross application time sheet configuration, could any one help me out to find the actual manpower costing in a better way.
Regards,
Prem

Hi Experts,
Can any one please reply on the same.
How to arrive the exact manpower costing through activity type ?..
Regards,
Prem

SAP E - Recruitment Integration with SAP PA ES Module

Hi all,
I have SAP Recruitment Application to be integrated with SAP PA_ES Module (SAP HR) through XI..
Now I have 2 questions;-
1.Does SAP recommends both the above mentioned applications on same SAP BOX ie the system will have both the application with the different clients on SAP system or a sort of addon...If yes , how the integration can made?
2.What is recommended/Suggested scenario for integration i.e. which adapters shall be used for this configuration??
it would be really very helpful if someone could throw some light on this
Regards,
AshwinM

Aswin
Why dont you check the following thread for more info
E-Recruitment
regards
krishna

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

Siebel Integration with SUN Access Manager

Hi Guys,
We are trying to integrate siebel with Sun access Manager.
I have gone thro the sun site but unable to find any documentation and policy agent to download.
Please guide me where can i find documenttaion and policy agent software download.
Thanks
Regards,
Mohit

There is no agent to integrate with Siebel directly. However it should be possible by using Sun web server or IIS agent. Here is an old document that may still apply.
http://docs.sun.com/source/816-6901-10/Chapter.html#wp19548
There was more detailed integration document on Siebel web site. But it has been removed after Oracle acquisition (http://www.siebel.com/partners/portal/docs/integrationbriefs/siebel77_sjsam_tib.pdf)
thanks,
shivaram

Siebel Integration with Lotus Knowledge Management Tool

Hi,
I am currently working on Siebel 8.1 and have a requirement to integrate it with Lotus Knowledge Management tool.
Does Oracle provide OOTB adapters for integration for Lotus KM just like Inquira?
Please let me know.
Regards.

Hi,
I am not able to find any information regarding integration of Lotus Knowlegde Management with Siebel.
Unless someone else in this forum has an answer, I recommend you to open a Service Request in support.oracle.com to confirm if such integration exists, and if not ask for a product enhancement request for this integration or request another solution that may be suitable. You can also contact IBM to verify if they have performed any validation using both products.
Thanks,
Wilson

Skipping errors in WBS elements closure with a SAP / Excel script.

Hai there!
I have a Excel / SAP macro for closing WBS elements in transaction CJ20N. This macro works fine until error messages occur (or warnings) in SAP because something was not completed on the WBS element.
So then I thought the macro may be able to skip the WBS element that has errors on it and continue trying to close the next one instead? And then make a little mark in my list of WBS elements to close. That would save loads of time.
Is this possible? This is what I have in the code right now.
WBSToClose = ActiveCell.Offset(0, 1).Value
session.findById("wnd[0]").maximize
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[1]/shell/shellcont[1]/shell").topNode = "         23"
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[0]/shell/shellcont[0]/shell").pressButton "OPEN"
session.findById("wnd[1]/usr/ctxtCNPB_W_ADD_OBJ_DYN-PRPS_EXT").Text = WBSToClose
session.findById("wnd[1]/usr/ctxtCNPB_W_ADD_OBJ_DYN-PRPS_EXT").SetFocus
session.findById("wnd[1]/usr/ctxtCNPB_W_ADD_OBJ_DYN-PRPS_EXT").caretPosition = 0
session.findById("wnd[1]").sendVKey 0
session.findById("wnd[0]/mbar/menu[1]/menu[1]/menu[6]/menu[0]").Select '<--- This is the close button, after this errors sometimes occur.
session.findById("wnd[0]/tbar[0]/btn[11]").press '<--- save button.
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[1]/shell/shellcont[1]/shell").topNode = "         23"
Below is an example of an error message popping up while trying to close.
session.findById("wnd[0]").maximize
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[1]/shell/shellcont[1]/shell").topNode = "         23"
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[0]/shell/shellcont[0]/shell").pressButton "OPEN"
session.findById("wnd[1]/usr/ctxtCNPB_W_ADD_OBJ_DYN-PRPS_EXT").text = WBSToClose
session.findById("wnd[1]/usr/ctxtCNPB_W_ADD_OBJ_DYN-PRPS_EXT").setFocus
session.findById("wnd[1]/usr/ctxtCNPB_W_ADD_OBJ_DYN-PRPS_EXT").caretPosition = 18
session.findById("wnd[1]").sendVKey 0
session.findById("wnd[0]/mbar/menu[1]/menu[1]/menu[6]/menu[0]").select '<--- Selecting close
session.findById("wnd[1]/usr/btnOPTION2").press '<--- Here I click "Continue" on the error message
session.findById("wnd[0]/tbar[0]/btn[3]").press '<--- Back button
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[1]/shell/shellcont[1]/shell").topNode = "         23"
I would also like the script to put a little mark in my excel file showing which WBS elements that had errors on them. Just a number or so. But thats a bonus.
Is this possible?
Thanks, Mattias

Hello again!
Thanks alot! I got it to work perfectly with some modifications to the code.
Posting the solution in case someone can find it useful.
If (ActiveCell.Value = 0) Then
Row = 2
Column = 1
WBSToClose = ActiveCell.Offset(0, 1).Value
session.findById("wnd[0]").maximize
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[1]/shell/shellcont[1]/shell").topNode = "         23"
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[0]/shell/shellcont[0]/shell").pressButton "OPEN"
session.findById("wnd[1]/usr/ctxtCNPB_W_ADD_OBJ_DYN-PRPS_EXT").Text = WBSToClose
session.findById("wnd[1]/usr/ctxtCNPB_W_ADD_OBJ_DYN-PRPS_EXT").SetFocus
session.findById("wnd[1]").sendVKey 0
session.findById("wnd[0]/mbar/menu[1]/menu[1]/menu[6]/menu[0]").Select '<-- Selecting close
session.findById("wnd[0]/tbar[0]/btn[11]").press '<-- Save button.
On Error Resume Next
session.findById("wnd[1]").Close '<-- Close window button on any error message or warning
If Err.Number = 0 Then
ActiveCell.Value = 2
session.findById("wnd[0]/tbar[0]/btn[3]").press '<--- Back button if error message
End If
On Error GoTo 0
session.findById("wnd[0]/shellcont/shellcont/shell/shellcont[1]/shell/shellcont[1]/shell").topNode = "         23"
Row = Row + 1
End If
If ActiveCell.Value = 2 Then GoTo Fortsaett '<-- Skipping writing "1" in "processed"
ActiveCell.Value = 1
Fortsaett:
n = n + 1
ActiveCell.Offset(1, 0).Select
'Some looping hereafter
Points awarded.
Thanks, Mattias

WBS element integration with Trade Claims Management Module

Similar Messages

Maybe you are looking for