WBS element not updating in additional data of IW32
Hello, We have created a sales order with account assingment as WBS element. From this line service order will be created, but when we check the service order additional data, the wbs element field is showing as blank. What is the reason for this.
AbhayDev,
Please Let us know your observation and Solution
Babu
Similar Messages
-
0PM_ORDER - WBS element not populated by extractor
Hi all
Just wondering if anyone has experienced a similar problem.
We use this data source as part of our PM master data loads. It runs every night, no problem. Iu2019m busy with a new user requirement regarding Project (WBS) costs as posted on PM orders, and I was pleased to see that 0PM_ORDER has field PROID (WBS) on it already u2013 thought I was half way to building my query!
Except, the field is not populated. Even when I run the extractor on the R/3 system to test (for an order type PM05 on which WBS element is a required entry), I never get any values in this field. I had a look on SDN and OSS and have seen a number of posts about the conversion exits relating to WBS elements, but this presupposes that a value is being populated in the extractor, which in my case is not happening.
Does anyone have any suggestions?
Regards, Lara0PM_Order extracts the data of WBS element on the tab "location" on the PM order (IW33). It doesnt extract the WBS element on the tab "Additional data".
I am not sure how these WBS elements are different, your PS consultant might have an answer. Either you can have user exit to fill this field or ask your ECC abap consultant to fill the same in both fields of order, if doesnt make any difference. I am also in same situation, keep me posted if you have have get any new information from your PS consultant or SAP. -
PSA showing Request not updated to any data target using delta
Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
ManishReg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help -
WBS Elements not getting created in ECC Project System from CRM 7.0
Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1. Set up the RFC connections between the two systems
2. Selected the connection type as Middleware in CRM system.
3. Installed the cProject Add on in CRM box.
4. Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5. The Project Scenario in PS config has the same name as the Project Type in CRM config.
6. Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya ShrivastavaHello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor. -
WBS element is updated while settling cost from WBS to AUC
Hi Experts
At the time of settlement , when we settling the cost from WBS to AUC , WBS element is updated in AUC line item of accounting document , but it should not be updated actually.
As result AUC cost is loaded on WBS and budget of WBS is get affected , furthermore system is not allowing for MIGO even budget is available but in CJ30 it is showing assigned value is more then original budget.
Please suggest.
Thanks & Regards
shaileshHi Saurabh ,
I totally agree with you , but in our case system is not allowing(Error Message: Budget Exceeded) MIGO against capex PO - > WBS.
Note : in our case , system is checking budget at the time of MIGO also.
in our case , report S_ALR_87013558 is showing wrong actual value and also in CJ30 , total assigned value is larger then total distributable budget , As result our available budget gets negative figure in report S_ALR_87013558 , even i have already run CJEN->CJBN 2 or 3 times.
Note: Our Commitment value is correct.
Actually , according to report S_ALR_87013542 , system is showing correct actual value , that means we have sufficient available budget for further MIGO's
Now may be , due to WBS element is updated in AUC line item of accouning document of settlement (WBS to AUC) , system loads AUC values to WBS unnecessarily , our available budget gets negative figure.
For your reference , i am attaching screen shot of accounting document which is generated at the time of settlement from WBS to AUC. -
PI 7.1 - CPA Cache not updated with directory data.
Hi Gurus,
I have installed PI 7.1 and recently I refreshed my cache in partial and full mode. when I go to RWB->Cache monitoring -> Show Cache Status Table, I see following error for Central Adaptor engine.
<?xml version="1.0" encoding="ISO-8859-1"?>
<ConfirmationXML>
<CacheRefreshError>
<EngineType>
AE
</EngineType>
<EngineName>
af.sxd.mchir134
</EngineName>
<RefreshMode>
C
</RefreshMode>
<GlobalError>
<Message>
CPA Cache not updated with directory data.
</Message>
<Trace>
com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
... 11 more
</Trace>
</GlobalError>
<GlobalError>
<Message>
Confirmation handling failed.
</Message>
<Trace>
com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:162)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:462)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:603)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
... 11 more
</Trace>
</GlobalError>
</CacheRefreshError>
</ConfirmationXML>
Please suggest the solution.
Thanks,
SurendraGuys,
I have the same issue. Any help on this is appreciated!
Issue log from CPA cache refresh
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.sxd.pl1vw158</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:195) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:448) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:457) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:166) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:470) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:576) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
</CacheRefreshError>
Regards -
Sp L records are coming to the PSA and not updating in the data target
Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps... -
Load status in PSA "Request not updated to any data target using delta"
Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi. -
Master data loads Request not updated to any data target using delta
When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PMHi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM -
Request not updated to any data target using delta
I am on BI 70 using 70 DataSource. I executed InfoPackage in full update, then ran DTP in full mode. There is only 1 data target. The requests were successfully updated in the target DSO. However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle.
My questions are:
1. Is this normal?
2. I need to do more full loads. When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
Thank you.
RebeccaHi Rebecca,
To answer your questions
1. Yes. This is normal.
2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA) would be re-loaded to the same data target .
If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
Hope this helps!
- Meera -
WBS element not populating at item level
Hi Gurus,
<br>I am trying to create a new sales order using the function module SD_SALESDOCUMENT_CREATE but when i pass a <br>value for the WBS element at item level it is not getting populated in the back end system.
<br>
<br> data :LT_RETURN TYPE TABLE OF BAPIRET2,
<br> LT_SALES_ITEMS_IN TYPE STANDARD TABLE OF BAPISDITM,
<br> LT_SALES_ITEMS_INX TYPE TABLE OF BAPISDITMX ,
<br> LT_SALES_PARTNERS TYPE TABLE OF BAPIPARNR ,
<br> LT_SALES_SCHEDULES_IN TYPE TABLE OF BAPISCHDL ,
<br> LT_SALES_SCHEDULES_INX TYPE TABLE OF BAPISCHDLX ,
<br> LT_SALES_CONDITIONS_IN TYPE TABLE OF BAPICOND ,
<br> LT_SALES_CONDITIONS_INX TYPE TABLE OF BAPICONDX,
<br> LT_SALES_CFGS_REF TYPE TABLE OF BAPICUCFG ,
<br> LT_SALES_CFGS_INST TYPE TABLE OF BAPICUINS ,
<br> LT_SALES_CFGS_PART_OF TYPE TABLE OF BAPICUPRT,
<br> LT_SALES_CFGS_VALUE TYPE TABLE OF BAPICUVAL ,
<br> LT_SALES_CFGS_BLOB TYPE TABLE OF BAPICUBLB ,
<br> LT_SALES_CFGS_VK TYPE TABLE OF BAPICUVK ,
<br> LT_SALES_CFGS_REFINST TYPE TABLE OF BAPICUREF ,
<br> LT_SALES_CCARD TYPE TABLE OF BAPICCARD ,
<br> LT_SALES_TEXT TYPE TABLE OF BAPISDTEXT ,
<br> LT_SALES_KEYS TYPE TABLE OF BAPISDKEY ,
<br> LT_SALES_CONTRACT_IN TYPE TABLE OF BAPICTR ,
<br> LT_SALES_CONTRACT_INX TYPE TABLE OF BAPICTRX,
<br> LT_EXTENSIONIN TYPE TABLE OF BAPIPAREX ,
<br> LT_PARTNERADDRESSES TYPE TABLE OF BAPIADDR1 ,
<br> LT_SALES_SCHED_CONF_IN TYPE TABLE OF BAPISCHDL2 ,
<br> LT_ITEMS_EX TYPE TABLE OF BAPISDIT ,
<br> LT_SCHEDULE_EX TYPE TABLE OF BAPISDHEDU ,
<br> LT_BUSINESS_EX TYPE TABLE OF BAPISDBUSI ,
<br> LT_INCOMPLETE_LOG TYPE TABLE OF BAPIINCOMP ,
<br> LT_EXTENSIONEX TYPE TABLE OF BAPIPAREX ,
<br> LT_CONDITIONS_EX TYPE TABLE OF BAPICOND ,
<br> LT_PARTNERS_EX TYPE TABLE OF BAPISDPART ,
<br> LT_TEXTHEADERS_EX TYPE TABLE OF BAPISDTEHD ,
<br> LT_TEXTLINES_EX TYPE TABLE OF BAPITEXTLI ,
<br> LT_BATCH_CHARC TYPE TABLE OF BAPIBTSEL ,
<br> LT_CAMPAIGN_ASGN TYPE TABLE OF BAPISDCA ,
<br> LT_CONDITIONS_KONV_EX TYPE TABLE OF KONV .
<br>
<br> DATA: LV_SALESDOCUMENT_EX TYPE BAPIVBELN-VBELN,
<br> LT_SALES_HEADER_OUT TYPE BAPISDHD,
<br> LT_SALES_HEADER_STATUS TYPE BAPISDHDST.
<br>
<br> DATA: LV_VALUE_SALESDOCUMENT TYPE BAPIVBELN-VBELN,
<br> LT_SALES_HEADER_IN TYPE BAPISDHD1,
<br> LT_SALES_HEADER_INX TYPE TABLE OF BAPISDHD1X,
<br> LT_SENDER TYPE TABLE OF BDI_LOGSYS,
<br> LV_BINARY_RELATIONSHIPTYPE TYPE BRELTYP-RELTYPE,
<br> LV_INT_NUMBER_ASSIGNMENT TYPE BAPIFLAG-BAPIFLAG VALUE 'R',
<br> LV_BEHAVE_WHEN_ERROR TYPE BAPIFLAG-BAPIFLAG VALUE ' ',
<br> LT_LOGIC_SWITCH TYPE TABLE OF BAPISDLS,
<br> LV_BUSINESS_OBJECT TYPE BAPIUSW01-OBJTYPE VALUE ' ',
<br> LT_TESTRUN TYPE TABLE OF BAPIFLAG-BAPIFLAG ,
<br> LV_CONVERT_PARVW_AUART TYPE BAPIFLAG-BAPIFLAG VALUE ' ',
<br> LV_STATUS_BUFFER_REFRESH TYPE BAPIFLAG-BAPIFLAG VALUE 'X',
<br> LV_CALL_ACTIVE TYPE CHAR4.
<br>
<br> DATA: WA_SALES_PARTNERS LIKE LINE OF LT_SALES_PARTNERS,
<br> WA_SALES_SCHEDULES_IN LIKE LINE OF LT_SALES_SCHEDULES_IN,
<br> WA_SALES_CONDITIONS_IN LIKE LINE OF LT_SALES_CONDITIONS_IN,
<br> WA_EXTENSIONIN LIKE LINE OF LT_EXTENSIONIN,
<br> WA_SALES_ITEMS_IN LIKE LINE OF LT_SALES_ITEMS_IN,
<br> WA_SALES_TEXT LIKE LINE OF LT_SALES_TEXT.
<br>
<br> LT_SALES_HEADER_IN-DOC_TYPE = 'ZSAL'.
<br> LT_SALES_HEADER_IN-SALES_ORG = '1000'.
<br> LT_SALES_HEADER_IN-DISTR_CHAN = '02'.
<br> LT_SALES_HEADER_IN-DIVISION = '01'.
<br> LT_SALES_HEADER_IN-PMNTTRMS = 'Z020'.
<br> LT_SALES_HEADER_IN-DUN_COUNT = '0'.
<br> LT_SALES_HEADER_IN-ADD_VAL_DY = '00'.
<br> LT_SALES_HEADER_IN-EXCHG_RATE = '0'.
<br> LT_SALES_HEADER_IN-BILL_DATE = SY-DATUM.
<br>
<br>data lv_kunnr type kunnr value '106475'.
<br>
<br>CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
<br> EXPORTING
<br> INPUT = lv_kunnr
<br> IMPORTING
<br> OUTPUT = lv_kunnr.
<br>
<br> WA_SALES_PARTNERS-PARTN_ROLE = 'AG'.
<br> WA_SALES_PARTNERS-PARTN_NUMB = lv_kunnr.
<br> APPEND WA_SALES_PARTNERS TO LT_SALES_PARTNERS.
<br>
<br> WA_SALES_PARTNERS-PARTN_ROLE = 'WE'.
<br> WA_SALES_PARTNERS-PARTN_NUMB = lv_kunnr.
<br> APPEND WA_SALES_PARTNERS TO LT_SALES_PARTNERS.
<br>
<br> WA_SALES_TEXT-ITM_NUMBER = '000010'.
<br> WA_SALES_TEXT-TEXT_ID = 'ZS01'.
<br> WA_SALES_TEXT-LANGU = SY-LANGU.
<br> APPEND WA_SALES_TEXT TO LT_SALES_TEXT.
<br>
<br> WA_SALES_TEXT-ITM_NUMBER = '000010'.
<br> WA_SALES_TEXT-TEXT_ID = '3010'.
<br> WA_SALES_TEXT-LANGU = SY-LANGU.
<br> APPEND WA_SALES_TEXT TO LT_SALES_TEXT.
<br>
<br> WA_SALES_SCHEDULES_IN-ITM_NUMBER = '000010'.
<br> WA_SALES_SCHEDULES_IN-REQ_QTY = '22'.
<br> APPEND WA_SALES_SCHEDULES_IN TO LT_SALES_SCHEDULES_IN.
<br>
<br> WA_SALES_CONDITIONS_IN-ITM_NUMBER = '000010'.
<br> WA_SALES_CONDITIONS_IN-COND_TYPE = 'ZMAN'.
<br> WA_SALES_CONDITIONS_IN-CURRENCY = 'NOK' .
<br> APPEND WA_SALES_CONDITIONS_IN TO LT_SALES_CONDITIONS_IN.
<br>
<br> WA_EXTENSIONIN-STRUCTURE = 'BAPE_VBAK'.
<br> * WA_EXTENSIONIN-VALUEPART1 = '090000000200'.
<br> APPEND WA_EXTENSIONIN TO LT_EXTENSIONIN.
<br>
<br>data lv_MATNR type MATNR value '000000000000000031'.
<br>
<br>CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
<br> EXPORTING
<br> INPUT = lv_MATNR
<br> IMPORTING
<br> OUTPUT = lv_MATNR.
<br>
<br> WA_SALES_ITEMS_IN-ITM_NUMBER = '10'.
<br> WA_SALES_ITEMS_IN-MATERIAL = lv_MATNR.
<br> WA_SALES_ITEMS_IN-TARGET_QTY = '1'.
<br> WA_SALES_ITEMS_IN-TARGET_QU = 'ST'.
<br> WA_SALES_ITEMS_IN-SHORT_TEXT = 'TESST AJ'.
<br> WA_SALES_ITEMS_IN-SALES_UNIT = 'ST'.
<br> WA_SALES_ITEMS_IN-CURRENCY = 'NOK'.
<br> WA_SALES_ITEMS_IN-WBS_ELEM = '011215'.
<br> APPEND WA_SALES_ITEMS_IN TO LT_SALES_ITEMS_IN.
<br>
<br> DATA : WA_ORDER_ITEMS_INX TYPE BAPISDITMX.
<br> DATA : LT_ORDER_ITEMS_INXN TYPE STANDARD TABLE OF BAPISDITMX.
<br> DATA : WA_ORDER_HEADER_INX TYPE BAPISDHD1X.
<br> DATA : LT_ORDER_HEADER_INXN TYPE STANDARD TABLE OF BAPISDHD1X.
<br>
<br> WA_ORDER_ITEMS_INX-UPDATEFLAG = ' '.
<br> WA_ORDER_ITEMS_INX-ITM_NUMBER = '000010'.
<br> WA_ORDER_ITEMS_INX-MATERIAL = 'X'.
<br> WA_ORDER_ITEMS_INX-TARGET_QTY = 'X'.
<br> WA_ORDER_ITEMS_INX-TARGET_QU = 'X'.
<br> WA_ORDER_ITEMS_INX-SHORT_TEXT = 'X'.
<br> WA_ORDER_ITEMS_INX-SALES_UNIT = 'X'.
<br> WA_ORDER_ITEMS_INX-WBS_ELEM = 'X'.
<br>
<br> APPEND WA_ORDER_ITEMS_INX TO LT_ORDER_ITEMS_INXN.
<br>
<br> CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
<br> EXPORTING
<br> SALESDOCUMENT = LV_VALUE_SALESDOCUMENT
<br> SALES_HEADER_IN = LT_SALES_HEADER_IN
<br>* SALES_HEADER_INX =
<br>* SENDER =
<br>* BINARY_RELATIONSHIPTYPE = ' '
<br> INT_NUMBER_ASSIGNMENT = LV_INT_NUMBER_ASSIGNMENT
<br>* BEHAVE_WHEN_ERROR = ' '
<br>* LOGIC_SWITCH = ' '
<br> BUSINESS_OBJECT = ' '
<br>* TESTRUN =
<br>* CONVERT_PARVW_AUART = ' '
<br> STATUS_BUFFER_REFRESH = 'X'
<br>* CALL_ACTIVE = ' '
<br> IMPORTING
<br> SALESDOCUMENT_EX = LV_SALESDOCUMENT_EX
<br> SALES_HEADER_OUT = LT_SALES_HEADER_OUT
<br> SALES_HEADER_STATUS = LT_SALES_HEADER_STATUS
<br> TABLES
<br> RETURN = LT_RETURN
<br> SALES_ITEMS_IN = LT_SALES_ITEMS_IN
<br>* SALES_ITEMS_INX =
<br> SALES_PARTNERS = LT_SALES_PARTNERS
<br> SALES_SCHEDULES_IN = LT_SALES_SCHEDULES_IN
<br>* SALES_SCHEDULES_INX =
<br> SALES_CONDITIONS_IN = LT_SALES_CONDITIONS_IN
<br>* SALES_CONDITIONS_INX =
<br>* SALES_CFGS_REF =
<br>* SALES_CFGS_INST =
<br>* SALES_CFGS_PART_OF =
<br>* SALES_CFGS_VALUE =
<br>* SALES_CFGS_BLOB =
<br>* SALES_CFGS_VK =
<br>* SALES_CFGS_REFINST =
<br>* SALES_CCARD =
<br> SALES_TEXT = LT_SALES_TEXT
<br>* SALES_KEYS =
<br>* SALES_CONTRACT_IN =
<br>* SALES_CONTRACT_INX =
<br> EXTENSIONIN = LT_EXTENSIONIN
<br>* PARTNERADDRESSES =
<br>* SALES_SCHED_CONF_IN =
<br> ITEMS_EX = LT_ITEMS_EX
<br> SCHEDULE_EX = LT_SCHEDULE_EX
<br>* BUSINESS_EX =
<br>* INCOMPLETE_LOG =
<br> EXTENSIONEX = LT_EXTENSIONEX
<br>* CONDITIONS_EX =
<br>* PARTNERS_EX =
<br>* TEXTHEADERS_EX =
<br>* TEXTLINES_EX =
<br>* BATCH_CHARC =
<br>* CAMPAIGN_ASGN =
<br>* CONDITIONS_KONV_EX =
<br>.
<br>
<br> commit work.
<br>
<br>I am aware that there are other BAPI's available to create a new sales order(BAPI_SALESORDER_CREATEFROMDAT2 <br>etc.) but the problem with using them is they internally call the same function module 'SD_SALESDOCUMENT_CREATE'. i <br>have already tried to create the sales order using 'BAPI_SALESORDER_CREATEFROMDAT' but the effect is the same.
<br>When I pass WBS element value in VA01 and create a sales order I can see that WBS element value is coming correctly. <br>But when i create the sales order using ABAP code WBS element is coming as blank. When I execute this standard FM it <br>creates the sales order correctly with a blank against WBS element. I checked in the VBAP table the value is not even <br>populated there . Kindly share your valuable inputs for the same.
- AkshayMay be you have to post this in ABAP forum to get suitable suggestions.
G. Lakshmipathi -
Form on screen, not updating for new data on inputstream
I'm writing a j2me midlet that will initiate a bluetooth connection to another device. I have been able to set up the inputstreams and outputstreams and send some data between the two devices using serial port emulation.
The following is the code for this part of the program:
ServiceRecord s = (ServiceRecord) serviceVector.elementAt(a);
int data[] = new int[10000];
InputStream in = null;
OutputStream out = null;
Form dataForm = new Form("Data");
dataForm.addCommand(exitCommand);
dataForm.addCommand(backCommand);
dataForm.setCommandListener(this);
display.setCurrent(dataForm);
try {
StreamConnection conn = null;
String url = null;
try {
url = s.getConnectionURL(ServiceRecord.NOAUTHENTICATE_NOENCRYPT, false);
conn = (StreamConnection) Connector.open(url);
} catch (IOException e) {
System.err.println("Note: can't connect to: " + url);
in = conn.openDataInputStream();
out = conn.openDataOutputStream();
int ch;
out.flush();
while (((ch) = in.read()) != -1) {
String aChar = new Character((char)ch).toString();
dataForm.append(aChar);
dataForm.append("\n");
conn.close();My problem is that the midlet on the mobile phone will only update its window to display the new screen as a form once the connection has been terminated, that is when the while loop has been broken. Is there a way in which to display the form while the inputstream is waiting for data and then watch the addition of data in real time to the form?
I am relatively new to java and have searched the forum/ internet for such a problem but have not been able to find a solution. CheersI don't think that is it now that we are into Monday and it still hasn't updated. Anybody else having issues with their text descriptino not updating? What's a good email address to contact apple about the problem. Non of the "contact Us" email addresses seem to fit the description. The [email protected] is a blackhole.
-
Input help for cost center & WBS element not working
Hi ALL
We are using SRM 4.0 with backend ECC 5.0.
Input help for attributes cost center (CNT), WBS element (PRO) are not functioning.
When tried to search for input help (F4) on the above attributes, I am getting message "Display not possible (Inconsistency in the input help)".
I even applied SAP note 746788 for cost center search help.
Can you tell me if I have missed any config settings?
Thanks in advance
JagdishHi,
Did you managed the transactional RFC destination in the customizing (where you define all your log. systems it is an additional field in the table control).
Regards.
Vadim -
Impact of NOT UPDATING infotype(Additional Action IT0302)
Hi,
I wanted to know the functional and technical impacts if IT302 is not updated and maintained ?
Regards,
JyotiHi Jyothi shankar,
IT0302- Additional Actions are maintained, if more than one action need to be updated/maintained on the same calendar date!!
Functional: In any organization different actions (say hiring & termination & Promotion & change of Org unit & etc...) can not be done on the same day
Ex: you can not hire and terminate any employee on the same date, isn't it?
that is the reason we have additional actions for any updations required on the personnel action on the same calendar date.
Technical: It will update your records as per the personnel action you run!!
Cheers,
TG -
Project stock (WBS element) not consider in QA07 Transaction
Standard SAP transaction QA07 for Deadline monitoring of batches not
considering project stock (WBS element) for the same
Kindly suggest for your possible solutions as we are going to fully equipped with
project system and its stock must be
considered for background scheduler of recurring inspection
Waiting for your kind and immediate action
With Regards,
Kunal ShethHi!
We regret to inform you, that the report RQAAAS10 ( QA07 ) does not
support project stocks.
For better understanding of the transaction QA07, I would ask you kindly
to review the documentation for the report RQAAAS10.
Here are the Requirements for this report:
'The batch master data corresponds to the selection conditions.
Only those batches that full fill the following conditions are examined:
-the batch status is "released".
-the unrestricted-use stock is greater than zero.
-the stock is not in a HU storage location'
This means that all 'special' stock locations, like for example project
stock, will be not relevant for this transaction.
Unfortunately SAP not able to provide a workaround for your
issue, with the exception of a customer own development. In this case
you can copy the report and make the correspondent adjustments needed.
Best regards
Erika
Maybe you are looking for
-
Macbook Pro 13" Late 2011 slow when charging power
Anyone had this issue? My Macbook Pro is a 13" late 2011, I5 and when i'm using it connected to the power it is much slower then when i'm using on batteries, even if the battery is fully charged. I already tried to reset SMC, PRAM etc. Any ideas? Tha
-
I have a Macbook Air. I have MS office installed and work in Excel often with no issues. But When I download an excel spread sheet from a Ford web site I seem to be getting code and not the work sheet. Example- MIME-Version: 1.0 X-Document-Type: Work
-
How do I get all the music in 'my music' onto my ipod?
I've followed the instructions for downloading music from my computer, but "My Music" has 734 items, and my ipod lists 567 songs. ???
-
Recently attempted to send an email with attachment in Mail. It was rejected as too large. Now it appears in Recovered Messages in "On My Mac", every time I try to delete it a duplicate appears in Recovered Message. How can I get rid of this?
-
Cs6 error on startup: missing msvcp110.dll (Nik/Google plugins)
I am getting msvcp110.dll is missing on startup of cs6. Photoshop online help was no joy