WBS Element on AR/AP Line Item Report

Hi All
When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
Thank you
Rukshana

hi,
If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
For Ex
Expense 1 Dr 1000- WBS 1
Expense 2 Dr 1000- WBS 2
Expense 3 Dr 1000- WBS 3
Vendor A Cr 3000
Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
Thanks and regards
Praveen.J

Similar Messages

Reg WBS Element in Sales Order Line Item For Sales Order BOM

Hi ,
Greetings!!!!
I have a requirement, in a Sales Order I am Exploding BOM. After that Projects will be Created.
Once Project will be created i need to Assign WBS element for All Items in Sales Order.
My requirement is When I assign WBS element for Header Material (Parent Item) system will auto assign WBS for Child Items.
for this what Configuration I have to do.
Please do need full.
Thanks,
Regards,
Prasad.

Hi Dayananda
Check in transaction VTFL for given item category what copying routine are set. Check those copy routine and see if there is any data is being copied from table VBAP
Similar to above also check transaction VTFA for copying routine (if any)
As a standard SAP even we create an invoice with reference to the delivery document, still there are some data which is being copied from a sales order i.e. all pricing relevant information is copied from your sales order and not from delivery.

Line item report on secondary cost element (cat - 21)

Hi Gurus,
Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
Please clear this doubt. thank you

Hi Mohit,
I hope you can have line item report @ order and WBS element stright away...
for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
I hope it helps a lot if I understand your query right
Regards..
Jose

Cost element and Line item reports show different actual costs

Hi PS experts,
My client has an issue pertaining to actual cost reports. The cost element report shows actual costs $42,000 for one WBS and when I double click to see details the value it shows is $2100. Even when I checked line item report for this WBS the value is $2100. What could be the reason for getting different values? If some one throw some light on this it would be great helpful to me
Regards,
Laxminarsimha

Laxminarsimha
The values in CJI3 should be correct and will include all postings (e.g. Settlement values) and possibly Actual Revenues unless a filter is in place - so take this as being your correct figure to start with.
Your drilldown will show the same value as CJI3 because it is CJI3
Any cost element report you are using is probably correct for what you are asking - is this a Standard Cost Element Report you are using or is it bespoke
One thing to be careful of when you drilldown on Cost Element Reports is that you do not always get the a make up of the value you have drilled down
e.g.
Cost Element Report was run for Period 1 to 6 2008 and shows £100.00
You drilldown and sometimes the drilldown automatically shows ALL line items e.g £500.00 (not just the values for periods 1 to 6 of 2008 which you may expect £100.00)
In the past I've removed the drilldown capability from bespoke cost element reports to prevent drilldown to the line item report (which is CJI3) because of this problem.
Usually where values for a a number of periods only (not total costs) was required
Other factors to consider
Revenues/Settlements may be excluded from Cost Element Report but will not be excluded from CJI3 unless you specifically restrict
You need to identify which types are postings are missing from the Cost Element Report (what is common...cost element, dr/cr indicator, business transaction)
I've also hit the mistake in the past where I've asked for periods 1 2007 to period 3 2008 and instead of giving me just over a years worth of actual it gave me actuals for periods 1 to 3 for 2007 and 1 to 3 for 2008.
Hope this helps
Steve

Delete of Element in Form for COPA line item report

Hello
I would like to change a form used for a COPA line item report - delete an element, which has been included for years. Unfortunately I got message, that 'You cannot delete, because element xxx is dependent'.
If I insert a new element if have no problems to delete it afterwards.
Can anybody help me?
Thanks in advance.
Best regards
Søren Kirch
LOGSTOR A/S

Hi,
To my knowledge, you cannot delete the element until you assign the new one in the form if only single element is assigned.
In case anymore element is there, there can be possibility this element is taken into consideration for making formula.
Regards,
Harish

Customer and vendor line item report FBL5N/FBL1N

Dear all,
Could you please let me know, whether there is any way that we can get cost center ans wbs element in customer and vendor line item report FBL1N/FBL5N.
REgards,
Suresh Patipati.

Hi Suresh
Through BTE1650 you can fetch it . for this you have to do some development.
You can add additonal field to FBL*N reports with using BTE exit.
Regards
SAP student

Profit center line item report

Hello All,
A sales order is created with reference to a service order, now when I see Profit center line items, the function area available in Service order is differ from the function area displaying with sales document number in profit center line item report. Can anyone please tell me where could be the problem.
Full points will be awarded for the answer.
Thanks & Regards
Srini

Hi,
what SAP release do you have ?
Normally the derivation of the functional area is made with the following logic:
1) manually entered
2) FI-Substitution (calling point 5 or 6 since ERP2004)
3) cost center
4) cost element
Please see also SAP note 106180 of how to correct wrong functional areas in PCA.
Best regards,
Andreas

How to change column heading in line item report

Hello Experts,
How to change the column heading in the line item report CJI4 or CJI3 ?
for eg: The field WBS will show as Object in the heading. Here I would like to change to WBS.
Is there a way to do this without changing ABAP code
FATMAN

Not possible through standard I guess.
Enhancement you should be looking is COOMEP01 which includes the component EXIT_SAPLKAEP_009
i.e., Line Item Reports: Customer-specific Formatting of the Lists.You use this enhancement to modify column headings.
Regards
Sreenivas

**URGENT** - Vendor Line Item Reporting

Dear Gurus,
Need some URGENT help with regards to Vendor Reporting?
Our business has requested for a Vendor Line Item / header Report, which will display ALL Vendor Items NET (before tax).
At the moment our business it manually taking out Tax in FBL1n (Vendor Line Item Report).
Please could you kindly let me know if there is ANY report in SAP which displays the Vendor Items NET & GROSS??
Thanks Very Much
RICK
Edited by: Rick Desilva on Apr 22, 2008 4:00 PM

Hi Shridhar,
All I want is a "net column" - Which will display the vendor invocie amount - BEFORE VAT (Tax).
So on FBL1N or Another SAP-Vendor Report what I need is a
Net Amount column and a Gross Amount Column.
I hope this makes sense and someone can assist....
Thanks & Regards
RICK
Edited by: Rick Desilva on Apr 23, 2008 9:36 AM

Asset Balances & Cost Line items Report

Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards,

AP Line-Item Report for State Auditors

Dear Members,
I am preparing one Report named AP Line-Item Report for State Auditors and i need the following fields in my report.
Check Number                PAYR-CHECT
Voucher Number             BSEG-BELNR
Check Date                     PAYR-ZALDT
Voucher Date                     BKPF-BUDAT
Vendor Number             LFA1-LIFNR
Vendor Name                     ADRC-NAME1
Vendor Street Address     ADRC-STREET
Vendor City                     ADRC-CITY1
Vendor State                     ADRC-REGIO
Vendor Zip Code             ADRC-POST_CODE1
General Ledger Acct No     BSEG-HKONT
Purchase Order Number     BSEG-EBELN
Tax Status Code             BSEG-MWSKZ
Taxable Amount             BSEG-HWBAS
Exempt Amount             BSEG-MWSTS
Tax                                     BSEG-MWSTS
Tax Accrued                     BSEG-MWSTS
Total Invoice                      BSEG-DMBTR
I am new to FI.So I request some one please let me know which datasources contain the above fields and which CUBE is best suited for this.
Thanks in Advance for help and quick reply is much much appreciated.
Best Regards
RC

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

COPA line item report, Number format -output type - object list(ALV).

Hi,
I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
But changes are not reflecting in- output type - object list(ALV).
Please provide help in this.
Regards

HI
What t-code you are using to write this line item report ?

Line item report with Customer number

Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.

If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period.

Create AP/AR line item report for parked items

Dear all,
Has anyone been able to create a line item report in AP or AR that includes parked items? I have created an aging report using standard 0SAPDUEAN-01 as a base, using report painter. Now the Finance department want to be able to see the numbers of the parked invoices as well but I am not able to find a way to pull these.
Does anyone know if this is actually possible?
many thanks

Hi,
by using of TCODE. FBV3 it is displaying parked documents
based on document type.
K.Satish

SKF line item report

Hi,
What is the t.code to see SKF line item report
Bye,
Ramesh

Hi,
I an the report the total value are appearing and when i am selecting the actual line items the message is "Assign a receiver report to the report". What should i do?
Bye,
Ramesh

WBS Element on AR/AP Line Item Report

Similar Messages

Maybe you are looking for