WBS element output not coming properly .

Hi ,
I have a customized report with , project(proj-pspid) ,wbs element( prps-posid) as selection parameters . The output is coming preperly when project is given as output but is not coming properly when wbs element is given as input. I am using PSJ logical database . Not sure why in debugging while giving only wbs element it is going to 'Conversion_exit_abpsn_input' instead of teh conversion exit 'Conversion_exit_abpsp_input' . Any idea on how it can be resolved?

Hi,
Please refer the WBS element to PSPNR (PRPS-PSPNR) instead of prps-posid ,
prps-posid refers to exit 'Conversion_exit_abpsn_input' and not 'Conversion_exit_abpsp_input'.
Regards,
Srini.

Similar Messages

Invoice output not coming properly

Dear Experts,
I have maintained condition record for the billing type and assigned it to the printer. Some of the invoices output are coming properly but for 4 to 5 invoices, print out prview is just skipping and when I click for printing, the system throws an error " output could not be issued" and the error is in green colour. I am not able to understand the reason behind it.
Can anybody help me out to solve the issue please.
Thanks & Regards,
Reji

Dear Reji,
T. Code: VF02/ VF03
Key-in your Invoice No. and Don't hit "enter".
On to the same Page, from Menu-bar, Click: Billing Document --> Issue Output to
A Window: Output Output, will pop-up.
Here, select the Output-line and Click Icon: Print Preview
Now, you would able to see Invoice Preview, providing Output Condition record is maintained.
If still, Invoice Preview doesn't appear, on to the same window: Output Output, Click Tab: Print Options.
Another Window will pop-up. Here, maintain Output Device (say, LP01) and tick Box: Print Immediately, and OK.
Again Select Output line and Click: Print Preview.
Best Regards,
Amit

Output not coming properly in SF

Hi all,
This is the select stmt i have written in the Program lines of Smartform.
SELECT VKORG VBELN FKTYP VTWEG
               FROM VBRK
               INTO TABLE ITAB
               WHERE VBELN BETWEEN '0090022987'   AND
               '0090023500'.
but i am geting the output like this, even though i have all the records
in the VBRK Table.
VKORG      VBELN               FKTYP             VTWEG
                 0090022987          1
                 0090022988          R
                 0090022989          R
                 0090022990          R
                 0090022991          R
But the Actual values of FKTYP are
1000 ,but in the output it is appearing as 1
R300, but in the output it is appearing as R.
and rest of fields(vkorg vtweg) are not displaying.
What could be the cause of Error ?
Thanks in advance
Krupali...

Hello KR
Check your table or template cell width . Make them wider.
This is surely happening because of your table/template's cell size. Make it more broder so that the values and text doesn't break.
Regards
Swetha
Edited by: Swetha on May 28, 2008 7:39 AM

DATA not coming properly

Hi ,
I have a customized report which uses the logical databse PSJ. It has project, wbs element(prps-posid) in the selection screen. When I give input to the project , the output is coming properly with the field(WBS element), but when I give the output WBS element as input in the field , it is retrieving some more data . I went into debugging and found that while retrieving posid from prps table , it is retrieving the value '############' due to which the output has more than the records that should be . Anyone has come across this scenario, please reply .
Thanks in advance.

I assume that the change is present in the PSA. If so is it just one field that is changing or multiple fields. ?
Also make sure the PSA is empty before loading.
Asif

Content Not Coming Properly after converting a Smartform to PDF.

I am converting a smartform into PDF format using CONVERT_OTF .
This smart form will be triggered from the portal at the occurance of an event .After Conversion some texts are properly outputted in the PDF but some texts which are in arabic are not coming properly ( shows some junk data in a language other than Arabic).
Can any give a Solution ??
Thanks
Chaitanya Sharma
Edited by: chaitanya sharma on Jan 28, 2009 2:15 PM

hi
try using this fm CONVERT_OTF_2_PDF
hope this helps
regards
Aakash Banga

WBS element does not belong to business area(Message No: CJ067)

Hi All,
While doing Billing through DP91 by giving the Sales Order No.,
it is giving the error "WBS element *****does not belong to business area** ".
The configuration between Business Area and Plant in Enterprise Structure level is fine.
Do let us know anything else need to be done to resolve the same.
Needless to say that helpful replies will be awarded points.
Best Wishes & Regards,
Raj Kumar Reddy.

Hi Chandra,
Business Area was given both in CJ20N and Sales Order level.
Also both these business areas are same.
To be more clear:
Say in the error it has mentioned the business area as 'X'.
But in Sales Order and Project level, 'Y' has been maintained.
System is throwing 'X' error, because the same is maintained under Cost Center level.
I cannot change the business area in Cost Center to 'Y' because of my business restrictions.
Regards.,

Condition value in billing not coming properly.

Hi All,
We have an issue wherein the condition value in billing document is not coming properly.
When qty is multiplied by the price the value should come as 208.04 ( 54.51 * 4 qty ), but the condition value is coming as 16.77.
We checked but could not find any proper reason for this.
When checked in details of condition type, we can see the Condition Origin as manually entered, but we are ot ale to trace the changes and also who entered the condition manually.
Kindly advise on the issue as it

Hi Mr. Satish,
I agree with Mr. Rajesh and for your 2nd question.
We can easily track down who entered the condition type in order
there are two possiblities
Either user who created the order, enter that condition type, that will not recorded in the changes so you can see the user id at header level--> on sales data page "Created by"
If some other user come in VA02 and enter the condition type then you can see it in
Go to Menu "Enviroment" --> Click at changes --> your document number is there --> Execute and see who entered it
Regards
MT

Theme not coming properly

Hi Experts,
We are having Federated Portal and the custom theme XYZ is developed in Consumer Portal. The ESS/MSS iviews are linked through Remote Role Assignment from Producer portal.
The theme is not coming properly. From Mashead to Top level navigation the theme XYZ is coming correctly but when I opens the page having iviews then the iView Tray is showing the SAP Standard theme and the content in the iView is sometimes taking correct XYZ theme.
I have cleared Federated cache, navigation cache and also cookies, but still it is not coming properly.
When I view source iView then
<html><head><LINK REL=stylesheet HREF="/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/sap_standard/prtl_std/prtl_std_ie6.css?7.1.6.0.0">
Please suggest.
Regards,
Deep

Try by re-starting the portal.
This is rarely necessary when dealing with the SAP Portal theme.
The advice from Sushil looks more like the solution as it is common to not upload the consumer portal theme in the producer portal. Because in an FPN the producer theme will be used when the consumer theme isn't found:
[SAP Note 880482|https://service.sap.com/sap/support/notes/880482]
http://help.sap.com/saphelp_nw04s/helpdata/en/5b/9f2d4293825333e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/06f6dc000a5a68e10000000a1553f7/content.htm
"If you are using custom made themes or have modified any of the out-of-the-box themes on the consumer portal, an administrator must manually import these themes to the producer portal. "
Next source of problems with themes is when your consumer and producer are on a different version (specifically when the producer is on a higher SPS or EHP) even when the consumer theme was imported into the producer.
br,
Tobias

Smart form -Right Alignment is not coming properly

Hi Folks,
While Printing Smart form for Invoice ,using right aligned Paragraphs texts are not coming properly.....but using left aligned paragraphs text are coming proporly....we want both left aligned and right aligned in same table ...for print preview it showing fine but while taking the print out it comes like this
for eg: ---
Net amount
1,000.00
      750.00
2,000.00
        40.00
      100.00
      300.00
30,000.00
O/P showing like this ....i have checked all the options in right aligned paragraph but no use
Kindly help ....
Edited by: bismilpk on Dec 26, 2010 2:31 PM

yes .....I solved....got the answer

Logo is not coming properly while mailing the script

this is my code..
m converting script output to pdf and sending as attachment... my pdf conatains LOGO.. when i received the mail,text is coming properly but LOGO is not getting printed properly..
pls suggest any solution to this...
thanking u in advance...
*& Report ZZGBTEST_PDF
REPORT ZZGBTEST_PDF.
TABLES: PA0105.
DATA: LF_FM_NAME TYPE RS38L_FNAM.
DATA: WA_CTRLOP TYPE SSFCTRLOP,
      WA_OUTOPT TYPE SSFCOMPOP,
      WA_STXH LIKE STXH.
DATA: T_OTFDATA TYPE SSFCRESCL,
      T_PDF_TAB LIKE TLINE OCCURS 0 WITH HEADER LINE,
      T_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : T_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
       W_FILESIZE TYPE I,
       W_BIN_FILESIZE TYPE I.
*OBJECTS TO SEND MAIL.
DATA : I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
        I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        I_OBJBIN LIKE SOLIX OCCURS 0 WITH HEADER LINE,
        I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
        I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        W_OBJHEAD TYPE SOLI_TAB,
        W_DOC_CHNG TYPE SODOCCHGI1,
        W_BUFFER TYPe STRING. "TO CONVERT FROM 132 TO 255.
DATA : V_LINES_TXT TYPE I,
       V_LINES_BIN TYPE I.
SELECTION-SCREEN BEGIN OF BLOCK SCR WITH FRAME TITLE TEXT-900.
SELECT-OPTIONS: MAILTO FOR PA0105-USRID_LONG NO INTERVALS.
PARAMETERS : WDATE LIKE SY-DATUM DEFAULT SY-DATUM,
               TESTRUN AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK SCR.
DATA: DATAB TYPE TABLE OF ITCOO WITH HEADER LINE,
      PDFTAB TYPE TABLE OF TLINE WITH HEADER LINE,
      BINFILESIZE TYPE I.
DATA: FNAME TYPE STRING,
      FPATH TYPE STRING,
      FULL_PATH TYPE STRING.
DATA: STRUCT TYPE ITCPO.
START-OF-SELECTION.
WA_CTRLOP-GETOTF = 'X'.
WA_CTRLOP-NO_DIALOG = 'X'.
WA_OUTOPT-TDNOPREV = 'X'.
STRUCT-TDDEST   = 'LP01'.
STRUCT-TDNOPREV = 'X'.
STRUCT-TDGETOTF = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
   DEVICE                            = 'PRINTER'
   DIALOG                            = SPACE
   FORM                              = 'ZGBTEST'
   LANGUAGE                          = SY-LANGU
   OPTIONS                           = STRUCT
EXCEPTIONS
   CANCELED                          = 1
   DEVICE                            = 2
   FORM                              = 3
   OPTIONS                           = 4
   UNCLOSED                          = 5
   MAIL_OPTIONS                      = 6
   ARCHIVE_ERROR                     = 7
   INVALID_FAX_NUMBER                = 8
   MORE_PARAMS_NEEDED_IN_BATCH       = 9
   SPOOL_ERROR                       = 10
   CODEPAGE                          = 11
   OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'MAIN'
   WINDOW                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
TABLES
   OTFDATA                        = DATAB[]
EXCEPTIONS
   UNOPENED                       = 1
   BAD_PAGEFORMAT_FOR_PRINT       = 2
   SEND_ERROR                     = 3
   SPOOL_ERROR                    = 4
   CODEPAGE                       = 5
   OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF..
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   FORMAT                      = 'PDF'
IMPORTING
   BIN_FILESIZE                = BINFILESIZE
TABLES
    OTF                         = DATAB[]
    LINES                       = T_PDF_TAB[]
EXCEPTIONS
   ERR_MAX_LINEWIDTH           = 1
   ERR_FORMAT                  = 2
   ERR_CONV_NOT_POSSIBLE       = 3
   ERR_BAD_OTF                 = 4
   OTHERS                      = 5
IF SY-SUBRC EQ 0.
MESSAGE 'SCRIPT SUCCESSFULLY CONVERT IN TO PDF' TYPE 'I'.
ENDIF.
LOOP AT T_PDF_TAB.
REPLACING SPACE BY ~
    TRANSLATE T_PDF_TAB USING ' ~'.
    CONCATENATE W_BUFFER T_PDF_TAB INTO W_BUFFER.
ENDLOOP.
REPLACING ~ BY SPACE
TRANSLATE W_BUFFER USING '~ '.
DO.
    I_RECORD = W_BUFFER.
APPENDING 255 CHARACTERS AS A RECORD
    APPEND I_RECORD.
    SHIFT W_BUFFER LEFT BY 255 PLACES.
    IF W_BUFFER IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
REFRESH : I_RECLIST, I_OBJTXT, I_OBJBIN, I_OBJPACK.
CLEAR W_OBJHEAD.
OBJECT WITH PDF.
I_OBJBIN[] = I_RECORD[].
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
MAIL TEXT TO BE FILLED UP HERE
SELECT SINGLE TDID TDSPRAS TDNAME TDOBJECT FROM STXH INTO
CORRESPONDING FIELDS OF WA_STXH
    WHERE TDOBJECT ='TEXT' AND TDNAME = 'ZGBTEST'.
IF SY-SUBRC = 0.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
       CLIENT                        = SY-MANDT
        ID                            = WA_STXH-TDID
        LANGUAGE                      = WA_STXH-TDSPRAS
        NAME                          = WA_STXH-TDNAME
        OBJECT                        = WA_STXH-TDOBJECT
      TABLES
        LINES                         = T_LINE.
    LOOP AT T_LINE.
      I_OBJTXT = T_LINE-TDLINE.
      APPEND I_OBJTXT.
    ENDLOOP.
ENDIF.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
DOCUMENT INFORMATION.
W_DOC_CHNG-OBJ_NAME = 'FORM'.
W_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
W_DOC_CHNG-SENSITIVTY = 'F'. "FUNCTIONAL OBJECT
W_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
PACK TO MAIN BODY AS RAW.
OBJ. TO BE TRANSPORTED NOT IN BINARY FORM
CLEAR I_OBJPACK-TRANSF_BIN.
START LINE OF OBJECT HEADER IN TRANSPORT PACKET
I_OBJPACK-HEAD_START = 1.
NUMBER OF LINES OF AN OBJECT HEADER IN OBJECT PACKET
I_OBJPACK-HEAD_NUM = 0.
START LINE OF OBJECT CONTENTS IN AN OBJECT PACKET
I_OBJPACK-BODY_START = 1.
NUMBER OF LINES OF THE OBJECT CONTENTS IN AN OBJECT PACKET
I_OBJPACK-BODY_NUM = V_LINES_TXT.
CODE FOR DOCUMENT CLASS
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
PACKING AS PDF.
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 1.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'FORM'.
I_OBJPACK-OBJ_DESCR = 'temp.PDF'.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255.
APPEND I_OBJPACK.
DOCUMENT INFORMATION.
CLEAR I_RECLIST.
CLEAR I_RECLIST[].
E-MAIL RECEIVERS.
LOOP AT MAILTO.
I_RECLIST-RECEIVER = MAILTO-LOW.
I_RECLIST-EXPRESS = 'X'.
I_RECLIST-REC_TYPE = 'U'. "INTERNET ADDRESS
APPEND I_RECLIST.
ENDLOOP.
SENDING MAIL.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_CHNG
      PUT_IN_OUTBOX              = 'X'
      COMMIT_WORK                = 'X'
    TABLES
      PACKING_LIST               = I_OBJPACK
      OBJECT_HEADER              = W_OBJHEAD
      CONTENTS_HEX               = I_OBJBIN
      CONTENTS_TXT               = I_OBJTXT
      RECEIVERS                  = I_RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
IF SY-SUBRC = 0.
    WRITE :/ 'MAIL SENT SUCCESSFULLY...'.
ENDIF.
*CALL METHOD cl_gui_frontend_services=>FILE_SAVE_DIALOG
CHANGING
     FILENAME = FNAME
     PATH = FPATH
     FULLPATH = FULL_PATH.
*CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   BIN_FILESIZE                    = BINFILESIZE
   FILENAME                        = FULL_PATH
   FILETYPE                        = 'BIN'
TABLES
   DATA_TAB                        = PDFTAB[]
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
*IF SY-SUBRC <> 0.
MESSAGE 'Error !!!' TYPE 'E'.
*ELSE.
MESSAGE 'PDF FILE SUCCESSFULLY DOWNLOADED ...!!!' TYPE 'I'.
*ENDIF.

Hi Sagar,
In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
Thanks
Phani

Barcode in PDF output not coming in Oracle R12.1.3

Hi,
We have a rtf template for Invoice report. In this report we have to display barcode in PDF output. In our development instance barcode is coming properly. But in our test instance barcode is not coming(same template is available in Development and Test instance).
We are using wocrb.ttf and w128l.ttf font files and we have these files available at $OA_JRE_TOP/lib/fonts path.
Also, we have config file available on $OA_JRE_TOP/lib directory. and this config file has correct path of both the font files.
Still the barcode is not coming in Test instance.
Request you all to please help me with this issue.
Thanks,
SA

PDF requires the font be registered correctly, since it is not appearing you have missed something in your configuration.
The most common error is the font family name does not exactly match the font name in Word. (Open the font on your PC and the name is present there also.)
You can use the xdodebug.cfg troubleshooting method, then see what error appears in the xdo.log when the font is accessed.
See the following note for xdo.log:
Note 364547.1 : Troubleshooting Oracle XML Publisher For The Oracle E-Business Suite
Thank you
Eugen

Element is not initialized properly

Hi.
Does somebody know some solution to the situation when unexpected element being before one with minOccurs="0" causes the last to be not initialized properly.
For example taking xsd:
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="test" type="TestType"/>
<xsd:complexType name="TestType">
<xsd:sequence>
<xsd:element name="name" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
, xml:
<?xml version="1.0"?>
<test param1="xxxx">
<wrong_element>xxx</wrong_element>
<name>Some Name</name>
</test>
and having
public class Main {
public static void main( String[] args ) {
try {
JAXBContext jc = JAXBContext.newInstance( "test" );
Unmarshaller u = jc.createUnmarshaller();
UnmarshallerHandler uh = u.getUnmarshallerHandler();
u.setValidating(true);
TestType testObj = (TestType)u.unmarshal( new FileInputStream( args[0] ) );
System.out.println("name="+testObj.getName());
} catch( JAXBException je ) {
je.printStackTrace();
} catch( IOException ioe ) {
ioe.printStackTrace();
results in outputing name=null, while compiled all that with <xsd:element name="name" type="xsd:string" minOccurs="1"> gives us correct behavior (error is handled but further processing goes as expected).
Any suggestions?
wbr, eugen.

Thats all was about JAXB.

WBS element is not getting populated in Excise entry in Project billing

Hi SAP Guru's
We have the case where we are doing the billing from manufacturing plant against Project. While billing WBS element is appearing in the invoice but in excise invoice entry same is not getting populated. This is affecting RR and P&L.
Can you help me by providing the standard solution to meet this requirement or update if we can meet this requirement by some function module or through any exit.
Thanks
Surender Gupta

Hi,
In transaction" VTFA" and for your sales and billing type,select your item category and in the same scree,your pricing type should be "D".This will copy all the conditions from sales order item.
Reward if this helps.
Regards
Karan

Delivery date is not coming properly in PO Printout

Hi,
I have a problem in PO Printout that Delivery date is not coming properlyu2026In my PO, there are 5 line items.
If the Delivery date of all line items are same like 01.04.2009, then Delivery date should be shown 01.04.2009 in PO printout.. IT IS COMING RIGHT.
But if the Delivery Date of all line items are different like 01.04.2009, 02.04.2009, 03.04.2009, 04.04.2009 and 05.04.2009. Then Delivery Date should be shown with the each line items in PO print out. THIS IS NOT SHOWING IN MY PO PRINT OUT.
Please tell me what is the problem. Why not coming Delivery date with each line items???
Regardsu2026

currently i dont have SAP installed with this system, so i just suggesting you some thing.
goto tcode: nace.
select your output type. check the processing routines. check the smartform and processing routines attached to it. and see how the field is getting populated and what fields are being passed there.

Satellite Pro U200: VGA output not working properly when AC adapter was connected

Hi,
I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
thanks in advance

As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

WBS element output not coming properly .

Similar Messages

Maybe you are looking for