WBS Element Version Released Already Exists

Dear All,
When we create a Project by copying another Project, we get the error message " WBS Element Version Already Exists. Help.
Regards,
Shareeq

Hi,
When you are copying project from template then you need to select WBS triangle instead of green tick.
You will enter in the screen wherein you need to replace std WBS with the one which is to be adopted. Then select check and include so that for every activity , WBS element you will find your given nomenclature.
Try this and revert.
Regards
Keshav

Similar Messages

  • WBS *** Version Released already exists

    Dear all,
    i face the following problem.
    i created a project with some WBSE. I-0001 is one of the WBSE.
    i released the project.
    i deleted the WBSE I-0001 and I saved the project.
    after a few days, my manager told me to add WBSE I-0001 to the project and i did so.
    but the error message stated  +WBS I-0001 Version Released already exists.
    is it correct? how can i solve this problem??
    thanks a lot
    Judy

    thank you very much for all your answers.
    i find the table VSPRPS_CN and the field POSID
    the deteled WBS (status released )is in this table.
    therefore, i cannot add the WBS with the same name (status released).
    i will award the points.
    thanks
    Judy
    Edited by: Judy ZHU on Feb 17, 2009 8:18 AM
    Edited by: Judy ZHU on Feb 17, 2009 8:24 AM

  • Creation of a new wbs elements to an already existing project

    1. i am using BAPI_BUS2054_CREATE_MULTI to create a new wbs element in an already existing project.When this is done then i am using BAPI_PS_PRECOMMIT and then bapi_transaction_commit
    so this creates the wbs element which i guess but only the element.
    2. Now i need to attach the networks to it which are there in BOM so i am taking all the network data from the table afko joining it with aufk.It is giving all the network data which was there attached prior to the project but the new one it is not showing.The query is
    SELECT afkoaufnr afkopronr aufkpspel aufkktext aufk~loekz
    INTO (afko-aufnr, afko-pronr, aufk-pspel, aufk-ktext, aufk-loekz)
    FROM  ( afko AS afko INNER JOIN aufk AS aufk ON aufkaufnr = afkoaufnr)
    WHERE afko~pronr = w_wbs_cur-psphi.
    3.Now i am comparing this data from above to the BOM data and take the difference of the networks which are to be created.
    But as the above query is not returning the new wbs so it is getting failed.

    i am already using this
      CALL FUNCTION 'CONVERSION_EXIT_KONPD_INPUT'
        EXPORTING
          input     = g_znpsdata_old-project_definition
        IMPORTING
          output    = w_wbs_cur-psphi
        EXCEPTIONS
          not_found = 1
          OTHERS    = 2.
    do i need to use the other one also

  • "File with specified name and version number already exists. Result code= -48."   ...????

    Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48."  WHAT IS THE PROBLEM?????? It's making me furious!

    Hi
    As the message says, there is a file at the recording directory that has the same name:
    http://support.apple.com/kb/ht1618
    Try changing the name of the track (this sets the filename in later versions of Logic 9
    CCT

  • Fields copied to AUC from WBS Element (when WBS Element is released)

    Hi,
    I would like to know what are the fields that are copied to AUC from WBS element (when WBS Element is released).
    Regards,
    Vivian

    Hi Vivian,
    menu path: Asset Accounting / Valuation / Determine Depreciation Areas in the Asset Class
    Select there your asset under construction asset class.
    Here you can fill in default values. (when you click on the fields you get more fields)
    When you want to fill in other fields you can use a substitution ( Asset Accounting / Master Data / Define Substitution)
    In our case, i think standard
    The field description (WBS)
    Req cost center (WBS)
    Plant (WBS)
    BA  (WBS)

  • ALV Filter Selection w/ error "WBS element 0000000000000000 does not exist"

    Hello,
    In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
    When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
    We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
    Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
    We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
    BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
    Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
    Thank you.
    SL

    Hello,
    In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
    When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
    We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
    Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
    We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
    BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
    Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
    Thank you.
    SL

  • Projects/WBS elements with identification "A" exist

    Hi Experts,
    While attempting change of project ID key length in OPSK, the following error experienced,
    Please suggest the steps to change the length from 1 to 3.
    The details error message:
    Message no. CS084
    Diagnosis: The key can only be extended, if there are no project definitions or WBS elements that are only identified with their external number by the key of the project editing mask.
    Example: Project editing mask 'EB-XXX-000'. The key cannot be extended if the external number is only 'EB'.
    Procedure: You can only change this by changing the external number.
    Regards
    ramSiva

    I agree with Gokul.
    First you will have to archive all the projects with the existing key for coding that you want to change. Then lock the existing mask (or delete it). You cannot create a new mask with a longer key till you do this. You will then have to change the length of the key from 1 to 3 for project coding.
    Hope this helps.
    Regards,
    Ajinkya

  • Closure of WBS Element - If no costs existing.

    Hi, 
    one of the WBS element having no costs but auc created through Investment measure.  But while closing the WBS element
    system throwing error as follows" Go to the asset in construction for the WBS element and correct the error that appears there".
    now client wants WBS to be closed without deleting AUC.    Please suggest us how can  i close WBS without deleting
    AUC attached to it.  Please advice.
    Regards
    Sreenivas.P

    Try the following method:
    1. Select the WBS in Project buider
    2. Select Edit - WBS Element - Invensting Programs -  Asset Under Construction
    3. Correct the error and directly save it.
    4. Try to re-close the WBS.
    Hope it works.
    Regards,
    Atom

  • Should or can I install new photoshop elements version 13 over existing version 7?

    I have a licensed download of Ver 13. My existing ver. is 7. My catalog has many photos needing reconnection, but all keywords are intact. I prefer to install alongside ver 7 - not overwrite it given internal catalog problems Can I?

    Yes. They are both stand alone applications.

  • WBS element deletion after project release

    Hi,
    getiing an error ,scenario is after deletion of WBS element  if i try to add same wbs..throwing an error that WBS element XYZ version RELEASED already exists.
    thanks

    Hi,
    You can refer this thread for more details;
    Re: Restoration of original WBS code
    Regards,
    Kabir

  • Change of WBS Element

    Hi,
    i am checking the all tabs of  WBS Element in CJ20N, while checking unfortunately one character of WBS Element was missed & saved accordingly.
    Old :   09/ITS/CN/IT/T09
    New:    9/ITS/CN/IT/T09
    Now user is trying to settle 09/ITS/CN/IT/T09 in CJ88, it showing the error as WBS does not exist.
    again i tried to change as  09/ITS/CN/IT/T09 in CJ20N. but it is showing the error as below.
    WBS element 09/ITS/CN/IT/T09 version RELEASED already exists
    Message no. CJ026
    Diagnosis
    A WBS element with the name 09/ITS/CN/IT/T09 already exists in version RELEASED.
    System Response
    Processing stopped.
    Procedure
    Enter another name for the WBS element.
    now how can i replace the correct WBS Element, Please suggest me any solution is possible.
    Regards,
    Shekar

    Hi Shekar,
    There are other options available to you, to resolve this issue.
    Firstly, you can manually delete the WBS Element from the table
    VSPRPS_CN. There is no report to remove individual records from this
    table.
    Alternatively, please review note 616732.
    This report renames the WBS Element within the table VSPRPS_CN. You
    could rename this WBS Element in VSPRPS_CN allowing you to recreate the
    operative WBS Element.
    Again customers are advised to contact regional support when running the
    report ZVERSION_UPDATE to be informed of the following.
    Thanks a lot and kind regards,
    Enrique Sosa

  • How to delete the project  version RELEASED.

    System is below:
    " Project 1522DJ110001 version RELEASED already exists
    Message no. CJ016
    Diagnosis
    A Version RELEASED already exists for project 1522DJ110001.
    System Response
    Processing stopped. "
        but in the system , there are no  "Project 1522DJ110001". so the user can't create the project "1522DJ110001".
        how to delete the Project 1522DJ110001 version RELEASED ?
    Please explain me all the steps to be required.
    Thanks in advance!

    Hi Harish,
    When I select Delete Project Version from Extras menu in CN41, its asking session number and version.
    In session number no serch help is avialble. I am keeping it blank and seleting RELEASED in version.
    After pressing enter I am getting an error Project Version RELEASED cannot be deleted??
    Let me the exact steps to deleted the Project Version.
    Thanks and Regards,
    Atul R. Rajmane

  • Issue in BAPI_PS_PRECOMMIT in mass creation of WBS Elements

    Hi,
    I am facing a issue with BAPI_PS_PRECOMMIT.
    we have the following WBS Hierarchy:
    S - Proj, (level1)
    S-XXX WBS Element (level2)
    S-XXX-001 WBS Element (level3)
    I have created a program for mass creation of WBS elements creation
    which uses the following BAPI's
    BAPI_PS_INITIALIZATION
    BAPI_BUS2054_CREATE_MULTI
    BAPI_PS_PRECOMMIT
    BAPI_TRANSACTION_COMMIT
    The proj: 'S' and the level2 WBS element: 'S-XXX' already exist in the system.
    When I run the program for delta load, so as to create the following level3 WBS elements:
    S-XXX-001
    S-XXX-002
    S-XXX-003
    The system is throwing the following errors at the BAPI_PS_PRECOMMIT:
    1. Final Check of the project definition and WBS elements: Error
    2. Validation unsuccessful
    Pls help me on this.
    Thanks,
    Deepak

    Check the WBS elements doesn't exist already in your system.
    Here is what I coded some days back for deletion of Network Activities, most of the things are same.
    You are doing for WBS element.
    * Call to initialization BAPI Before Delete
          CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
    * Call to Network Activity Deletion BAPI
          CALL FUNCTION 'BAPI_BUS2002_ACT_DELETE_MULTI'
            EXPORTING
              i_number           = t_bapi_activity-network
            TABLES
              it_delete_activity = l_t_del_vornr
              et_return = l_t_bapiret2.
          DELETE l_t_bapiret2 WHERE type <> 'E'.
          READ TABLE l_t_bapiret2 INDEX 1.
          IF sy-subrc EQ 0.                                      "If error in Deletion
            MOVE: f_idoc_contrl-docnum TO t_idoc_status-docnum,
                  l_t_bapiret2-type TO t_idoc_status-msgty,
                  'CNIF_PI' TO t_idoc_status-msgid,
                  l_t_bapiret2-number TO t_idoc_status-msgno,
                  l_t_bapiret2-message TO t_idoc_status-msgv1.
                  MOVE c_idoc_status_error TO t_idoc_status-status.
                  APPEND t_idoc_status.
                  ROLLBACK WORK.
                  EXIT.
          ELSE.                                                  "If Delete is successful COMMIT
    * Call to PreCOMMIT BAPI
            CALL FUNCTION 'BAPI_PS_PRECOMMIT'
             TABLES
               ET_RETURN       = l_t_bapiret3.
    * Call COMMIT BAPI
    *        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
          ENDIF.
    The other solution is use BAPI_PROJECT_MAINTAIN.

  • Project Versions - Already Exist Message

    Hi Experts
    We are using CN72 to create Project Versions and there is a requirement that different projects need to be created with version key 1 (identified as initial version) with same version description and version group.
    whenever we create the version there is a warning message saying "Project version 1 already exists (see long text)" with  Message no. OV004
    however we can save version with given key, description and version group.
    What is implication of this message and is there a way to avoid it
    Regards
    Shailesh

    I think SAP doesnt recommend to use same version key for different projects. I simualted your case, and i looked into the longtext of the warning message, it says it will lead to performance problem if you use same version key for different projects. Please read the longtext of the warning message.
    Edited by: Ahmed Rifaee on Aug 12, 2010 10:33 AM

  • Unable to edit WBS element once Project is released

    Hi,
    I am unable to edit the WBS element once Project has been released. Is this SAP standard behaviour? Is yes, is there a way we can make this editable and is it advisable?
    Please advice.
    Regards,
    Sophia Xavier

    Hi,
    The point is I am able to edit the WBS element before I have released the Project. But, once I have released the project the WBS element is blocked for changes.
    Infact the WBS element is editable until the higher level WBS element is released. But finally when I release the Project and system status changes to REL, the WBS element is blocked for changes i.e., it is not editable.I am just trying to understand if this is standard behaviour of SAP that WBS element becomes ineditable only overall Project is released. If the WBS element has to be changed after release, is there a way out?
    Regards,
    Sophia Xavier

Maybe you are looking for

  • CRM Survey - Radiobutton check?!

    Hello guys, I have survey with 40 question - each question has a group of radio buttons with 5 options! no option is pre-select!!!! how can I check, if all questions answered before you can submit the form?? Please help!

  • Photo Booth slows down!

    I have a MBP 2.0 with 10.4.6 and I've noticed that Photo Booth runs very slowly when I chose effects button #1 (so you can see all the effects at the same time)... When I go to the second page of effects or just operate with one effect at a time, it

  • How many applications can be installed?

    I have a medical users that uses Epocrates, Tarascan, Clinical Consult, and Sandoth. The phone 8330 gets slowed down and I am assuming this is a memory problem.  So i need to confirm this so i can recommend a diferrent platform for her if necessary.

  • 18 Clicks to set the sleep timer

    It takes me as many as 18 clicks of "Menu" on the scroll wheel, to go from a song window to set a sleep timer and back again. 6 from the song back to the Main Menu, 6 to set the sleep timer and back to the Main Menu (plus rotating the scroll wheel to

  • Need help writing a code for this program

    Design a code that reads a sentence and prints each individual word on a different line