WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

Similar Messages

PO is not getting create in ECC

Hi ,
    I am in SRM 7.0 SP 3.0 and ECC.. I have developed the custom BRF for Category approver and activated Standard Role Resolver 'RR_SPENDING_LIMIT_APPROVER' for SLAPPROVER which is working fine. . But i am facing an issue that once SC has been fully approved but the PO is not getting transfer into ECC. When I check BBP_PD for the SC the status I can see the below status
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
But when I execute the FM 'BBP_PD_SC_TRANSFER_INTERNAL' manually with the SC GUID I got the error message as
Exception       SYSTEM_FAILURE
Message ID:          BBP_PD                     Message number:           507
Message:
No links corresponding to the specified data could be determined..
I check the BBP_PD After executing the FM 'BBP_PD_SC_TRANSFER_INTERNAL' manually with the SC GUID . The status has been moved to next status..
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
0000000001 I1111          Item in Transfer Process
at this stage I execute the report program 'BBP_GET_STATUS_2' to get the status. but I got the following error
         No Shopping Cart (REQUIREMENTS) Found with Status = Transferred
        Batch program for updating status information for SCs as of Rel. 3.0
         On the basis of the data, no changes possible
        The following RFC destinations were called:
         RFC Destination:                   Call result:
In order to create PO what are configure steps I have to perform..
Regards,
Jr.SRM

Dear Elham,
To find the solution of the problem I think you need to debug.
Follow below steps if this help you
a) Run the report "FBGENDAT"
b) Input the data as below screen shot
c) Then go to se37 execute FM : BAPI_PO_CREATE1
d) You will find the test data directory and test data will be saved as below
e) In this test date change PO number you should get the error which you are getting above.
Thanks
Ankit Jain

SRM PR is not getting created in ECC backend

Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumar

yes, i could see a PR number with all this additional details as below.
Table   BBP_PDBEI
CLIENT                       453                                                              Client
GUID                         4CAEFA58EB9D005CE1008000AC1C2031                                 Globally Unique identifier
BE_LOG_SYSTEM                QA1400                                                           Logical System of Logistics Backend
BE_OBJ_ITEM                                                                                Follow-On Object Item in Back-End System
BE_OBJECT_TYPE               BUS2105                                                          Follow-On Document Object Type in Back-End System
BE_OBJECT_ID                 2000000167                                                       Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE                                                                                Reference Object Type in Back-End System
BE_REFOBJ                                                                                Reference Object in Back-End System
BE_REFOBJ_ITEM                                                                                Reference Object Item in Back-End System
BE_REFOBJ_SBITM                                                                               Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2                                                                               Reference Object Type in Back-End System
BE_REFOBJ2                                                                                Reference Object in Back-End System
BE_REFOBJ_ITEM2                                                                               Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2             0000                                                             Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC                                                                                Storage location
BE_PLANT                     2016                                                             Plant
BE_BATCH                                                                                Batch Number
BE_VAL_TYPE                                                                                Valuation type
BE_MOVE_REAS                 0000                                                             Reason for Movement
BE_EXPERYDATE                00000000                                                         Shelf Life Expiration Date
BE_PUR_GROUP                 206                                                              Purchasing group
BE_PUR_ORG                   2000                                                             Purchasing organization
BE_CO_CODE                   2000                                                             Company Code
BE_DOC_TYPE                  CLRQ                                                             Purchase Requisition Document Type
BE_ACCREQUIRED                                                                                Account Assignment for Logical Backend Required
BE_SP_STK_IND                                                                                Key for Special Stock Section
BE_INFO_REC                                                                                Number of purchasing info record
BE_MOVE_TYPE                 201                                                              Movement type (inventory management)
BE_PACKNO                    0000000000                                                       Package number
BE_INTROW                    0000000000                                                       Internal line number for limits
BE_ITEM_TEXT                                                                                Short Text of a Service Purchase Order Item
BE_PO_PRICE                  1                                                                Price from Backend
BE_UNLOAD_PT                 200                                                              Unloading Point in Backend
BE_DEL_IND                                                                                Deletion Indicator in Backend Documents
BE_TRACKING_NO                                                                                Requirement Tracking Number
BE_COND_TYPE                                                                                Condition Key
BE_COND_STEP                 000                                                              Level Number
BE_COND_COUNTER              00                                                               Condition counter

Invoice not getting created in ECC 6.0

SRM Classic Scenario 5.0 and ECC 6.0 as backend. ECC6.0 is where all purchase documents are created
Started invoice posting from SRM and it gets posted in ECC 6.0. Our FI data is maintained in ECC.
When we are trying to create Invoice from SRM and IDoc is seen in ECC and IDoc is in 'Error' status.
Debug was run
We have couple of messages from BD87
-- Reversal quantity greater than quantity invoiced to date (M8080)
-- Cash discount amount cannot be posted.(M8845)
Can it be related to credit/debit indicator?
Can you please let me know from an FI standpoint if we are missing any configuration on the ECC side. Its SRM Classic Scenario with 5.0, Server5.5 and ECC 6.0 ? I checked the Goods Movement type of 201 and it has a Indicator of H (Credit). We use this movement type in SRM as well.
Please advise. Thanks for your time.

Hi,
Supposed to install GERMAN Language while installing the Solaris OS. As we have missed it, SAP could not interpret the German Characters properly and thus the "Mysterious Characters error occured".
After installing the German Language, the problem was rectified and we were able to release the transports without any errors.
Thanks for the help.
L Raghunahth.

SRM PR,PO is not getting created in ECC backend

HI
i create SC in classic scenario. and after the manager approve the SC the follow on Doc didnt create in ECC
i define object for po pr and reserve in backend
when i check FM :BBP_PD_SC_CHECK i havent any error message
but when i have chek the SC in RZ20 i have this error: Local Error: Shopping cart 0010000308: Error creating the follow-on document
and when i chek BBP_PD i have this status:
Stats:
           Status         Description                    Inactiv
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
how to resolve this issue?
Regards
Elham

Dear Elham,
To find the solution of the problem I think you need to debug.
Follow below steps if this help you
a) Run the report "FBGENDAT"
b) Input the data as below screen shot
c) Then go to se37 execute FM : BAPI_PO_CREATE1
d) You will find the test data directory and test data will be saved as below
e) In this test date change PO number you should get the error which you are getting above.
Thanks
Ankit Jain

Set WBS status in Project System from CRM Status

Hi Gurus
I am figuring out a solution for how to influence WBS element status in Project Systems in ECC from the campaign/Marketing plan status in CRM. Has anyone done it before or is there any BADI for it.
Your help is greatly appreciated.
Regards
-MP

Your yourself answered your question.
"Can we create our own list of system status"
"Our own" status creation and maintenance feature within SAP in called "User Status".
Please follow link below to have additional information regarding system status.
link: [http://help.sap.com/saphelp_erp60/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm]

Data not getting inserted in R/3 System from Webdynpro

Hi,
We were trying to insert some data into r/3 z-table using a Custom BAPI using RFC.
But the data is not getting inserted.
Through I commit is being performed explicity.
Please help:
Below is the code :
Controllor code :
public void wdDoInit()
    //@@begin wdDoInit()
     try{
        Z_Bapi_Rfq_Test_Input objStatus = new Z_Bapi_Rfq_Test_Input();
        wdContext.nodeZ_bapi_rfq_test().bind(objStatus);
//        Create a new element in node Bapi_Transaction_Commit_Input
      Bapi_Transaction_Commit_Input inputCommit =
      new Bapi_Transaction_Commit_Input();
      wdContext.nodeBAPI_TRANSACTION_COMMIT()
      .bind(inputCommit);
        //Bapi_Transaction_Commit_Input obj;
       // wdContext.nodeZ_Bapi_Quo_Salesrep_Status_Input().invalidate();
        //wdContext.nodeOutput().invalidate();
        //wdContext.nodeRfq_Status().invalidate();
          } catch(Exception rfqException){
                    wdComponentAPI.getMessageManager().reportException("rfqException="+rfqException.getMessage(),true);
    //@@end
public void executeBapi( )
    //@@begin executeBapi()
     try{
               Z_Bapi_Rfq_Test_Input obj = wdContext.currentZ_bapi_rfq_testElement().modelObject();
               AbstractList   objAbBapiPartner = new Bapiparnr.Bapiparnr_List();
               Bapiparnr objBapiPartner = new Bapiparnr();
               objBapiPartner.setPartn_Numb("0000001046");
               objBapiPartner.setPartn_Role("AG");
               //obj.addPartner(objBapiPartner);
               objAbBapiPartner.add(objBapiPartner);
              obj.setPartner(objAbBapiPartner);
              Bapisdhd1 objBapisdhd1 = new Bapisdhd1();
               objBapisdhd1.setSales_Org("2500");
               objBapisdhd1.setDistr_Chan("30");
               objBapisdhd1.setDivision("20");
               objBapisdhd1.setDoc_Type("ZRFQ");
             obj.setHeader(objBapisdhd1);
             obj.execute();
//             Synchronise the data in the context with the data in the model
               wdContext.nodeZ_bapi_rfq_test().invalidate();
          wdContext.nodePartner().invalidate();
               wdContext.nodeHeader().invalidate();
               wdContext.nodeOutput().invalidate();
               wdContext.nodeReturn().invalidate();
//               Z_Bapi_Quo_Salesrep_Status_Output outPut= obj.getOutput();
//               if(outPut!=null){
//                    List materialList=outPut.getRfq_Status();
//                    if(materialList!=null){
//                      wdComponentAPI.getMessageManager().reportSuccess("materialList="+materialList.size());
          } catch(Exception rfqException){
               wdComponentAPI.getMessageManager().reportException("rfqException="+ rfqException.toString(),true);
    //@@end
public void executeBapi_Commit( )
    //@@begin executeBapi_Commit()
     try {
//       Calls remote function module BAPI_Transaction_Commit
     wdContext.currentBAPI_TRANSACTION_COMMITElement().modelObject().execute();
     wdContext.nodeBAPI_TRANSACTION_COMMIT().invalidate();
     wdContext.nodeOutput1().invalidate();
     wdContext.nodeReturn().invalidate();
     wdContext.nodeReturn1().invalidate();
     } catch (WDDynamicRFCExecuteException ce) {
          wdComponentAPI.getMessageManager().reportException(ce.getMessage(), false);
    //@@end
View Controlloer Code:
public void wdDoInit()
    //@@begin wdDoInit()
     wdThis.wdGetCControllerController().executeBapi();
     wdThis.wdGetCControllerController().executeBapi_Commit();
             IWDApplication wedDynApplication=wdComponentAPI.getApplication();
             IWDApplicationInfo applicationInfo=wedDynApplication.getApplicationInfo();
             Collection collection=applicationInfo.getApplicationProperties();
    //@@end

Hi Gareth,
I was not getting enough time to reply, so replying late.
Actaully the problem was with r/3 BAPI Code itself.
There was condition in the begining of the code to check the data in the workare of R/3, so this condition was failing here.
But when we try to invoke that bapi from r/3 workbench it works fine because the data first comes to R/3 workarea then to R/3 Tables.
But when we insert data from Webdynpro framework , the data directly goes to R/3 Tables rather than the R/3 Workarea. So in Bapi the first condition was failing and no data was getting inserted.
So this was the problem, and we solved it.
Thanks,
Regards,
Aditya metukul

PPM not getting created when ECC Production version is changed

Hi,
We are facing a problem with PPMs.
We changed the Production version in ECC for the corresponding Material in ECC from 5000 to 6000.
We then ran the RSPPMCHG and then generated and activated the PPM Integration Model.
No queues inbound (APO) or Outbound (APO) were blocked. \
The result was that the 5000 PPM was deactivated in APO but we could not find the 6000 PPM version anywhere.
Can anyone please help??
Regards
Abhishek Sahi

Hi,
Refer notes 448085 PPM Transfer: Tips and Tricks
Aslo after generating and Activating the IM, run the report RSPPMCHG ( Tcode - CFP3)
Thanks,
nandha
Edited by: S.Nandakumar on Oct 8, 2010 10:05 AM

File not getting created in a different server

My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
Vish

Try to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
    RFC_DESTINATION            =
*   FILE_MASK                  = ' '
*   LOCAL_DIRECTORY            = ' '
*   REMOTE_DIRECTORY           = ' '
*   OVERWRITE_MODE             = ' '
*   TEXT_MODE                  = ' '
*   TRANSMISSION_MONITOR       = 'X'
*   RECORDS_PER_TRANSFER       = 10
*   MONITOR_TITLE              =
*   MONITOR_TEXT1              =
*   MONITOR_TEXT2              =
*   PROGRESS_TEXT              =
* IMPORTING
*   LOCAL_DIRECTORY            =
*   REMOTE_DIRECTORY           =
*   LOCAL_SYSTEM_INFO          =
*   REMOTE_SYSTEM_INFO         =
* TABLES
*   FILE_LIST                  =
* EXCEPTIONS
*   CONNECTION_FAILED          = 1
*   INVALID_VERSION            = 2
*   INVALID_ARGUMENTS          = 3
*   GET_DIR_LIST_FAILED        = 4
*   FILE_TRANSFER_FAILED       = 5
*   STOPPED_BY_USER            = 6
*   OTHERS                     = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Transfer Requirement not getting created

Hi All,
My query as below;
Production order is created using KANBAN (Control Cycle/Supply Area is defined) using classic KANBAN.
WM is in place and all the setting related to TR/TO creation for WM movement type 103 is in place.
When i am trying to receive this Production after completion it is not creating the TR/TO, while as material document is getting generated and shows the stock directly in interim storage type 901 without creating TR and TO.
Further i checked there is indicator in Production order i.e "Kanban indicator" that gets checked automatically when Production order is created using KANBAN Processs and if i remove that indicator forcefully, TR and TO is getting created normally.
Please provide some inputs where can be the problem and how TR and TO can be created normally eventhough KANBAN indicator is checked in Production order and where i can found the setting related to "KANBAN INDICATOR".
Appreciate your help.

Hi Maddy
Thanks very much for your response.
1. When you use KANBAN, you define separate KANBAN storage location, which is different from WM-managed replenishment storage locations, and separate KANBAN interim storage area with storage bin.
Yes different storage location is defined which is not WM-managed in supply area.
As you said Control Cycle is defined, see if the interface is properly defined for both of these Sloc.
Where i can check whether interface is properly defined or not.
2. See if you have defined the KANBAN replenishment strategy with Control type Transfer Requirements from a Storage Location which is being controlled by WM in the Customizing for Production under KANBAN > Replenishment Strategies > Define Stock Transfer Strategies
Actually for a material two strategies are defined like;
1) In-house Production strategies-0003-
supply area is defined with storage location which is IM managed.
And when this order is completed and i am trying to receive this in WM SLOC (usally whatever SLOC we have defined in supply area it proposes that SLOC at the time of receipt but i am changing this manually to WM managed SLOC) using transaction MIGO, it is directly taking the stock to 901 interim storage type and in total the stock increases but the problem is when TR is not getting created i am not able to take this to the storage bin as per strategies defined.
2) Stock Transfer Strategies-This is working fine and in that TR/TO is working fine.
3. For TO to get created automatically by the system from the transfer requirement, see if an indicator Automatic TO creation in the replenishment strategy is set or not. Yes this is set for stock transfer strategies but i didn't find option to check the TO creation automatically for in-house production strategy
4. Also, check that you have set up a suitable replenishment movement type for KANBAN in the Customizing for Warehouse Management under Activities > Transfers > Define Movement Types (i.e.standard is 350 for KANBAN replenishment)-Yes this is also defined correctly.
Appreciate your more inputs on this.

ERMS : Email work items not getting created

Hi Forum
In my test system (CRM 2007), inbound mails were properly coming in and getting distributed to agent's inbox. But after the server restart, I realised that the work items for inbound mails stopped getting created due to which mails are not reaching agent's inbox.
Mails are visible in SOIN but their associated Work items are not there in SWI1.
I have checked almost all the settings like Email Distribution (SO28), CRM_ERMS_WF_CUST (Event lining is in place and is active), swu0 (Event simulation is working).... but still not sure why work items are not getting created for inbound mails.
Any thoughts ? Help will be deeply appreciated.
Regards
Vishal Mani

Thanks Bruno for your time to reply !
I checked this transaction and in overview there are 19 events with errors. But apart from that everything is green.
I checked the Linkages with Error tab and realised that the events with errors belong to object type BUS1006.
In Activation tab --> Linkages --> Object type (ERMSSUPRT2) --> Linkage is activated.
Infact that is the first thing, I checked when work items were not getting created.
So no clue from here too.
Regards
Vishal Mani

With WBS element unable to create the Shopping cart

Hi,
With WBS element unable to create the Shopping cart
Problem description:
Shiopping cart >Item detail > Account assignment
A/c assignment category " WBS element", Assignment no (some no,eg 1000-2 ).System picks the G/L account and business area,unable to create the shopping cart.Getting error message that
"The account assignment objects are defined for different business areas "
Did i missed anything ,please
Thanks
Hareesha

Hi Hareesha,
As Sreedhar has rightly said the issue is definitely with the correctness of the data.
Check the assignment of WBS to the proper business area which you are using to create the shopping cart.Check your org. structure and attributes and their assignments once again.
Neverthless some OSS notes for your reference if in case you can not able to make P.Os or the SC's / P.Os are not getting transfered to back end R/3.
<b>Note 727897 - WBS element conversion in extended classic scenario</b>
<b>Note 1000184 - Account assignment error when document transfer to back end</b>
Even after validating the data if the problem still persists please explain it clearly with the errors for further help.
Rgds,
Teja

Java.lang.Exception: Could not get name for DC project

Hello Experts,
We have a code which is downloaded from SVN repository.
I have imported the code from my desktop into NWDS and when I try to deploy it throws,
java.lang.Exception: Could not get name for DC project
I have referred few threads in SCN and solution suggested is to change the workspace and create a new DC & copy the _comp from old DC.
I tried the above solution but there are lot of build errors as we have few RFC models and it is throwing build errors for missing model reference.
Kindly help me on how to fix the error.
Thanks, Swarnaprakash

Dear Swarnaprakash,
The Web Dynpro DCs Import C:\----\user\.dtc\LocalDevelopment\DCs\sap.com\test and
the related package for DC is missing once check it after try to import.
Depending on which Java compiler preferences are set, you may see some
warnings in the "Task" view after importing the project. If the severity level for problems of type "Unused imports" (set in Preferences – Java – Compiler) has the value "Warning", the compiler will issue a warning for unused import references. Ignore these warnings!
Still You getting means delete your .metadata before take the backup.after open the NWDS again it will set new configurations in your system.
Thanks & Regards,
Durga Rao.

File not getting created at the Reciever

Hi All,
I have implemented a simeple file to file scenario. The file is getting deleted from the source directory but is not getting created in the target directory. It shows a checkered flag in SXMB_MONI . When i do Communication Channel monitoring for the reciever Comm. Channel, it shows no messsages .
I have refreshed the Cache in Integration directory. it is still not working.
I tried using a different Communication channel with the Mail adapter that is working fine.
I cant figure out what the problem is please help.
Many Thanks,
Neha

Hi! Neha,
Here i want to add some points :
Even I faced same problem in project....... then I followed this procedure...
My scenario is FILE TO RFC via FTP Server in file adapter.
Here issue is file is picking from FTP and showing success in MONI but data is not reaching to BW system..
Most of the times I checked and I did successfully.
Main issue are due to:::
1. Check Queues in Inbound queue SMq2
2. Trace teh step by step in message flow in message monitoring that means check whether message flows
from a) Intergration Engine
b) Adapter Engine..
3. Check and trace the flow in Message monitoring in Run Time work Bench
4. Check Status of Receiver communication Channel in Communication channel Monitoring
5) Check whether Business Services are Scheduled in Availability Time planning or not
6 Also Check in Visual admin whether the services are released or not if any others are might using the same servivcees and cahnnels and suppose if they are scheduled or not
7. Do Cache Refresh mainly SXI CACHE, ADAPTER ENGINE CACHE
8 Finally if still not resolved J2EE ENgine SOFT Restart..instead of doing restarting entire XIengine server.
Once the Server is started then defintely all the messages if suppose if 40 messages are picked from source directory and not reached to Target then all those definetely 100% become success and reached
Note:: All above needs to check only if development part is correctly configured.
Also check the Receiver target and sender directory Permissions in FTP Server i.e., rwx permissions okay
Thanks
Amar Srinivas Eli
Reward Points if useful

Delta record not getting created

Hello Experts -
I'm working with 0mat_plant_attr datasource.
In ECC, I made changes to some materials in MM02. I changed the values of MRP Type and Rounding Value in MRP1 tab. The data is saved correctly but a delta record is not getting created. In RSA7, no records are there for 0mat_plant_attr. MRP Type, Rounding Values are attributes of 0mat_plant. I did run the initial infopackage from BW to enable the delta.
Can someone please help me with this? I'm not doing something correctly.
Thanks!

Hi Syed,
I think you may have to run an attribute change run after executing your infopackage to see the changes. The modified attribute needs to be set as active in by the attribute change run.
Master data & attribute chage run
Regards,
John

WBS Elements not getting created in ECC Project System from CRM 7.0

Similar Messages

Maybe you are looking for