WBS Full name

Hi everyone,
I'm developing integration application under .net with Primavera EPPM by using p6 web service. I'm getting the list of EPS and Projects, and then the list of WBS by selected Project.
But I noticed that WBS name in P6 client consist of the ProjectName + WBS code on the parent Code + WBS code on required level.
How I can get the whole WBS name on each level without using any recursion logic, only from p6 web service?
Best regards,
Dmitrij.

Hi Sachin Gupta,
Actually i tried this. But there is no field in the WBSFieldType list which could me show the full WBS path on each Level.
Best regards,
Dmitrij

Similar Messages

Having problem with display of full name in finder bar!

As shown in the image above, my full name in finder bar is not showing properly. When I select 'icon' from system preferences it shows correctly, but when I select full name or short name, it touches the top.
Help me fixing this issue!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Boot in safe mode and log in as yourself. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, including your login items.
Test again. Same problem now?
After testing, reboot as usual (i.e., not in safe mode.)

How to show full name of user in crystal report

Hi. I am using Crystal Report 2008. I need to show full name (first name and last name) of the user logged in. Currently I am using "currentceusername" but it shows the user id that a user uses to login.
Is there any way to show the full name of the user in crystal report?
Thanks in advance.

Hello,
Not you H4... Can I suggest if someone replies to actually add something of value!!!!
Cr does not have the ability to query your AD Server. What you would have to do is use a AD query tool or Export Option and export the user info from the log on ID into a Excel or an Access table or something CR could report off of. Then you can add a subreport to get the name from the ID and insert it into the main report.
Check with your IT department, they should have tools to get the info. I'm not sure if there is a DB connector that would allow you to query the AD server directly but if there is one and it supports ODBC then you can use that as your subreport Data connection.
Typically names do not change that often so rather than running the Query every time the report is generated it would be better to export the info to a text type file and simply use it for your report. IT can put a rule on to export if the Names change.
Thank you
Don

Problem with Calendar and drag and drop a name to a Time spot with palm desktop. Full name does not appear only last name.

Im having a problem with the palm desktop. When in “Contacts” and I list (LastName,First name) and then I move to the Calendar and drag and drop a name to a Time spot Only the LAST name of the Person appears. How can I fix this so that I can see there full name ?
Also when If list (Company,Last Name) then go to calendar Some of my contacts are out of order but if I drag and drop them into the calendar day the full name appears. Is there any why of fixing this ? Or having it work properly ?
Im running XP pro
Palm Desktop Version 4.1.4
Post relates to: Treo 680 (Rogers)
Message Edited by corrado on 07-21-2008 08:55 AM

Any Idea how to fix the problem that I am getting when using the (Company,Last Name) and the contacts being out of order in the calander ? I have some last names starting with A then it goes to D then a B then a stack more A and none of then have a Company field filled out in them in them...
Thanks for looking into that for me but it seems really stange to offer the option but not put in the first name in the calander when you drage the name over. I hope this is fixed in the future. Can anyony sugest another desktop platform I can use if I cant fix my problem with the (Company,Last Name) problem?
Post relates to: Treo 680 (Rogers)

How can I change the "Full Name" for my iCloud account?

Hello,
At some point in the past, iCloud started identifying me as someone else when I send emails. This incorrect name appears to be the "Full Name" setting of the email account, but when modifying the properties for the email account in Mail the field for modifying the "Full Name" setting is disabled, not allowing me to make any changes.
Where is the correct place to change the "Full Name" setting for my iCloud account?
Thanks,
- Josh
<Email Edited By Host>

I believe it can be changed by going to https://appleid.apple.com/, click Manage your Apple ID, sign in with your iCloud ID, select "Name, ID and Email Addresses", then click "Edit" next to the name listed under "Your Name" and change it as desired.
Also, if you are trying to change the sender name for your iCloud email account, you'll want to go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail (Command-Q) on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.
(The image was removed in your post above because it showed your iCloud email address.)

Snow Leopard's Address Book now Requires Full Name to find a Contact

In all previous versions of Address Book, the user could simply type 'T' to instantly go to contacts with last names that start with 'T' (and businesses that start with 'T').
In Snow Leopard, Address Book can no longer search with one letter the way it did before; it uses a 'Spotlight' type of search where the user must type the full name in order to get an exact match. This type of searching is useful for finding documents on the Mac or searching the Internet, but is totally inefficient for finding contacts in Address Book.
It sounds like someone at Apple decided this was a better way to search for contacts, because this change in search method is described in the new Address Book 'Help' file; it says, "As you type, Address Book begins to search all the information on the cards, including notes, and displays matching contacts, with the matching text highlighted in each card." For example, let's say someone used to type 'T' to search for a contact named Bill Tilman. Now what happens is that Address Book stops at the first person who's first name starts with 'T', and highlights all the T's in the person's card (the T in 'telephone', the T in 'Street', etc. The user must now scroll through all their contacts manually to find Bill Tilman, or else manually type out the complete name 'Bill Tilman'. (If they just type 'Bill', they will only get the first person named Bill.)
I hope Apple will reconsider and will allow Address Book to do the quick one-letter searches by last name (as opposed to 'Sort' by last name, which it still has) like it used to. (Or at least make this a choice in Address Book Preferences.) This would also be more compatible with the way iPhone searches for contacts; when you select a letter in the iPhone's contacts, it finds contacts who's last name starts with that letter, as well as businesses, just like Address Book always used to.

Thanks for your response Ernie. You are correct in that whenever you type a series of letters, Address Book (as it always has) finds every single thing with that combination of letters - Names, businesses, adjectives, people's dogs' names, letters in product serial numbers, etc. This is useful for finding a subject on the Web, or finding all documents related to 'iPhoto' on your Mac, etc., but not useful, quick or convenient when trying to find one person to call in your Address Book (which is what people use Address Book for).
What is DIFFERENT in the Snow Leopard version, is that the ability to type one letter to instantly go to last names with that letter has been removed. Previously, you could easily find 'Bill Tilman' in one second by simply typing 'T'. Now you get every word that starts with T and all the words in the card that have a T in them. If you type out a full name like 'Bill', it finds every person named Bill. No one would ever want to find all their contacts named Bill to call them. You could type out the full last name 'Tilman', but there again you are forced to type out a complete name to do a search. It would actually be quicker to scroll down and find it manually. The ability to type a single letter to find the last name (or business name) of a contact you needed to call, was much quicker and easier than having to type out the entire name.

Certain characters not appearing in the "full name" when sending e-mail

I have certain characters in my full name of one of my e-mail aliases in iCloud. However, those characters are simply absent from the name shown as sender name when sending mail from Mail app in OS X. For me the problematic characters are C5 A1 and C4 8D (UTF-8 codes).

Yes, š and č are those. Sorry, I wasn't sure if they will work here. I have my full name containing the š and č in the "Full Name" field of the e-mail alias settings on web interface to the iCloud Mail. But in Mail on OS X my name in the "From" field appears without those two characters (other characters are OK) when I select this alias. Also, those two characters are invisible at the recipient's side. And yes, if I sent a copy of such a mail to myself the š and č are missing again in the "From" field.
However, I have the same full name with š and č for my main e-mail address (iCloud account name). Using this main e-mail address š and č appear everywhere!
Message was edited by: mikkec

Can you increase the viewable filename length in pages 'grid view' so the full name of the file is shown and not ellipses.

I am aware of the terminal command which allows you to view more of the file name for files located on the desktop. Is there something similar for pages?
The problem is only apparent in grid mode.
See attached.
For all of Apple's perfection for design and intuition, this is always something they seem to have neglected.

You can either hover your mouse over the filename for a second and the full name will appear, or revert to list view.

How to print an email with the full name of the attachment ?

In Mail, when using "View as an Icon", the name of the attachment - if too long - does not appear in full. Any tip on how to have the full name appears (for archiving purpose) ? Thank you

Srinivas, Thanks for your quick reply.
This is smartform, and sending the output as pdf, except the the first page on which I have the text to be printed on the email body. In this email body text I have to display an email.
when user clicks on the email should open an outlook with the email id in the TO. Hope this helps.
Thank you,
Surya

What's the difference between "Full Name" and "Account Name"

Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

Your computer name by default would be "John David Appleseed's Macbook Pro"
But you can always change that in System Preferences->Sharing
And yes, the first account you set up will be an administrator.

In which table I can get the Contact full name(First name and Last name)

Hi,
In which table, I can get the field for Contact Person Full name. In many tables Iam seeing FIRST NAME and LAST NAME as two fields.
Regards
Babu.

You can use FM "CRM_BUPA_DESCRIPTION_READ".
regard,
vijay.

How do I convert a full name to firstname lastname

I need to parse some text that I have in a DB. I have over
5000 records to output, so I am hoping something will be
effiecient. However, it is a one time process, so it is not that
big of a deal.
I have a field 'fullName'. It contains a users full name (as
the name implies). I need to output this so that the 'firstName' is
in one field and the 'lastName' is in another field. The entries
range from 'Jim Smith' to 'John C. Dvorak Jr.' (not really John,
but I wanted to keep this interesting).
In the case of John, I need the first name and Middle initial
to end up in the 'firstName' field and everything else in the last
name field.
I tried to loop over using a space as the delimeter, but that
just sepeates everything into parts. I need the middle initial to
hang with the first name and anything trailing the last name to
remain there.
Any clever thoughts? Help is much appreciated.

ok, try this:
<cfoutput query="getUsers">
<cfset numelements = listlen(getUsers.fullName, "
")>
<cfif numelements is 2>
<cfset firstname = listfirst(getUsers.fullName, "
")>
<cfset lastname = listlast(getUsers.fullName, "
")>
<cfelseif numelements gte 3>
<cfset firstname = listgetat(getUsers.fullName, 1, " ")
& " " & listgetat(getUsers.fullName, 2, " ")>
<cfset lastname = right(getUsers.fullName,
len(getUsers.fullName) - len(firstname) - 1)>
<cfelse>
<cfset firstname = getUsers.fullName>
<cfset lastname = ''>
</cfif>
</cfoutput>

Display Full Name in SharePoint Designer Workflow Email

Hi!
    I want to Display Full Name of a User value from "Assigned to" column...
    When I use lookup on "Assigned to" column I get domain/username instead I want to display John Smith (Full Name)...
    Is there a way to do that within SharePoint Designer...

Hi,
Even I am facing the exactly similar issue as Ashish. Also I don’t have Central Administration access :(
But I was just wondering, is there any way to extract the proper name in FName and LName format using user profile details option?
I mean on the top-right section on sharepoint site you can see “Welcome username” section. On this you can select “My
settings” option where you can see a form with user details including Name field (e.g. Sachin Dubey) and Account field (e.g. CompanyName/Dubey.s.4).
In our case the workflow takes “Account” field instead of “Name” field so can we make any settings from the workflow
or sharepoint front-end so that it takes Name field.
Help is much appreciated.
Sachin D Sharepoint Developer

How to change my 'full name' in Mail on iPhone?

I use a me.com address and iCloud. I successfully changed my full name in Mail on my Mac, but won't show up on mail sent from phone.

Ah, after endless searching, this popped up in "More like this" right after I posted:
Settings > Mail, Contacts, Calendar> Select the email account with the issue and go into the Account Info area. In the Name field enter your full name.
Looks like it has to be changed locally on the phone. Thanks!

Full Name(USR_FULL_NAME) is not showing up in User Defn of "OID Process"

I have made the "Full Name" (USR_FULL_NAME) field visible under section "Basic User Information" by going to OIM-UI -> Advanced -> User Configuration -> User Attribute. Note that this 'Full Name' field is not same as out of box 'Common Name' or 'Display-Name'. This is not based on First-Name & Last-Name combination, but a user editable field.
When I configure pre-pop adapter or "OID User" process, I do not see this field in "User Definition" drop-down list. I see all the corresponding fields of USR except this one field. What could be going wrong here ?
Thanks!
Kabi

Thank you all.
Note that, I can see the "Full Name" in create user screen and able to enter data for this field. However, I do not see this field in 'User Definition' drop down list when I try to map it in a pre-pop (or oidMODIFYUSER) adapter.
I checked the attribute lists of all OOB 'Authorization Policy' involving "search user" permission and found the 'Full Name' is already selected. What else I should be looking for ?
Thanks!
Kabi

WBS Full name

Similar Messages

Maybe you are looking for