WBS in Asset Master
Hi All,
One Asset was mapped to WBS in Asset master at the time of creation (Origin tab in asset master). Now I want to de-link this mapping, or simply put remove/delete this WBS from asset master as client does not wish to settle the project to this Asset. This field is greyed out in AS02 and cant be changed directly. Any pointers on this this WBS can be removed from this mapping?
Regards,
Vaibhav
The only time I've seen what you're describing be the actual case, is when the asset main numbers are the same - but different sub-numbers (appended 4-digit field).
System can have main on the settlement rule, and actually settle to a sub-number instead (asset NOT on the settlement rule).
This happens when the asset master data of the receiver (the one on the settlement rule) does not match the master data objects for the sender AuC (asset under construction) or perhaps an internal order.
Scrutinize the master data for the asset on the settlement rule, comparing it to the sender and then to the one receiving the settled value. I think you'll find the receiver on settlement rule is not a good match. It may be possible to test this by inputting a deactivated date on the General tab of the sub-number (the one NOT on the settlement rule). Then, a settlement error message should be thrown telling you there is no sub-number asset that can receive the settlement.
It is coincidence that that sub-number has the WBS on its Origin tab.
Removing it from Origin tab will not stop settlements to the sub-number if I am correct.
Regards,
Greg
Similar Messages
-
WBS assignement in Asset Master & postings Impact on business processes??
Hi all,
We have the option in asset master record to give the WBS element, so whenever we procure an asset we will procure it to a project so we planned to give wbs in asset master record.
we even calculate dep for the project. and we will transfer asset from one project to another.
by considering above all if we assign wbs in asset and procure it to project and calculate dep. does it leads to any other implications. we tested the above cycle its working fine, but we are unable to vizualise other impacts.
so somebody please guide us to goahead with this opttion.
thanks & regards,
shashi kanth.Hi,
Typical use of this is to do a statistical posting to the WBS and a "real" posting to the asset. It is a nice feature, as you can tell and report on your origins of assets by WBS.
Good luck!
Tammy -
WBS Field in Asset Master Record
Hi All,
Currently we are working in 4.6 C version.
The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent.
The standard functionality is available in ECC6
Could some body help us in knowing how to achieve this in 4.6c, do we the SAP standard Solution or do we need to go for some enhancements.
Regards,
NitinHi
@ Satish - Seems you have copied the reply from one of my earlier posts which is related to a different issue
@ Nitin: Go to Screen layouts (IMG > AA > Master data > Screen layout)
Here, you need to allow WBS Element in your screen layout... Also, if you cant see WBS there, Allow to use WBS element in the IMG Step AA > Integration with GL > Define Additional account assignment objects...
I never worked on 4.6, but I guess WBS must be allowed for usage
br, Ajay M -
How to use WBS element in Asset master data upload
Dear All
Does any body know how to treat field WBS element in Asset master during upload.
Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
I vaguely remember tht with wbs system internally assign a different number.
Has anybody come across this issue?
Please help
Thanks
SanjeevThere are in the asset 2 fields for PS
One is filled when you do an settlement from an WBS (is not possible to fill in)
The other one you found in the the tab time dependend like cost center.
This field is available when you have assign the possibilety to do depreciation to an WBS.
Paul -
WBS element in Asset Master (Period Dependent Tab)
Hi
I have activated the WBS Element in Account Assignment Object in Asset, which has resulted in WBS Element field has appreared in Period Dependent Tab.
But the issue is that its grayed-out & i am not able to fill-in any data in it.
Can you please infrom me how can i activate WBS element in Asset Master ( Period Dependent Tab)
Regards
Ashwinhi,
goto asset master screen layout and put tick mark under time dependent data.
govind. -
Asset Master-Old WBS to NEW WBS
Hi All,
Is there any programme or t.code to replace to old WBS to NEW WBS in the Asset Master data.
Is there any LSMW programme for the same?
Thanks
Chinnahi
In SAP Standard there is no LSMW for this requirement. you to create your custom development -
Asset master record validation rule
Dear All,
Could you tell me the way, how i can write a validation/substitution rule in the Asset master record. I need to make sure the below steps shoud be the same:
A. Cost center in the Aseet master record.
B. Responsible cost center in the asset master record.
C. Responsible cost center in the WBS element of the same asset.
The above three should be the same. User should not be allowed to change, if tries to change error shoud be thrown.
Regards,
Suresh Patipati.OACV Define Validation
OACS Define Substitution
The Respond cost center is copied from the WBS to Asset. Set this field on display int he asset.
Financial Accounting / Asset Accounting / Master Data / Define Screen Layout for Asset Master Data / Define Screen Layout for Asset Master Data
When this give problems with the copy rule from PS you can set-up authorization groups
Financial Accounting / Asset Accounting / Preparing for Production Startup / Authorization Management / Process Asset Views -
Automatic creation of asset maste
I want to know how to configure this:
when I created a project ,an asset master would be automatically created.
best regardsIM- PS ingetration is based on Investment profile. When Release status is set on Investment profile carrying WBS based on setting system will create AUC. Reqeust you to search in forum / Read SAP Help on IM ; you will get relevant information.
With Regards
Nitin P. -
Updating employee in asset master
Hi
There are several laptops and mobile phones which are given to employees. I need to track employee-wise assets. So i need to update employee name in asset master
But here there is no HR module so personnel numbers are not available. Employees are created as a vendors only.
I thought of evaluation group. But updating evaluation groups everytime at the time of addition / exit of new employees would be a configuration.
So let me know how this requirement can be fulfilled.Hi Meenu
I have seen many companies in this scenario...What they do is even though they dont have HR Module, they still create Personnel No.s in HR.... You dont need any separate license for that... Just a bare minimum settings are required to create Personnel No.s
Asset Master has field Personnel No available in the screen layout... So, you dont need to do any Z development in this option
Option 2 - Use AIST002 and add the field Vendor No in the asset master as said above...
Option 3 - Use a Stat IO or WBS created with Personnel No as the IO / WBS No...
Easiest is option 3, but it is a work around
Moderate is option 1 - This is Std solution... You can also Personnel No in lot of FI postings related to employees.. Eg: To track their vehicle expenses or Mobile expenses, etc...
Complex one is option 2.... This is a Z Dev....
br, Ajay M -
Substitution exit for asset master is not getting triggered.
Hi
I have created a substitution exit program ZGGBS000 having exit U215 and U216. If the Asset affirm value is initial , then WBS elemnt value will copied to asset affirm value field in the table ANLA.But it is not getting tiggered, when i am trying i save the asset in AS01 tcode. Kindly help.
Thanks
SubhaHi,
Please try thes exits:
Enhancement AIST0001 Exchange number range in master data maintenance
Here we can export both ANLA-ANLN1 ANLA-ANLN2 and Import VALUE(I_ANLA) LIKE ANLA STRUCTURE ANLA
AIST0002 Customer fields in asset master
Alternative exits:
AFAR0003 External changeover method
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
TRAN0001 User exit for asset transfer
AAPM0001 Integration of asset accounting and plant maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
AIST0001 Exchange number range in master data maintenance
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
I hope this may helpfull.
Thank you,
Thanks,
AMS -
Quantity field updated in asset master
Hi,
We are facing one problem when we are settling the WBS elements to AuC the settlement process is running fine but the original quantity mentioned in the asset master gets change after the settlement. to some X figure.
kindly help me to solve the problem, as it is not possible to go and edit the manually 100's of Asset master.
Points assured.
regards,
Anand DattaRefer the note 421308
Regards
Sreenivas -
How to change cost center in Asset Master record ?
Hi SAP Gurus,
My client is asking me to change cost centers in Asset Master records using LSMW. Currently, the field cost center is in display mode. In order to change the cost center, the field cost center must be in change mode while recording in LSMW. I have changed screen layout rule for Asset Master data. I have selected radio button "Optional" for cost center in screen layout for Asset Master data. But still cost center field is in display mode in Asset Master record. It must be changeable.
Please suggest me how I can resolve the issue.
Regards,
K.S.KHi Saravana,
We can change the cost center for AuC Investment measure at WBS element level. For that purpose we need to go to AuC Investment measure Asset master record and check WBS element under Origin Tab. Double click on WBSE and then check the cost center under Assignment tab. And also check the cost center in Asset master record for the same. Now you can go to T.Code CJ12 (Change WBS Element) and change the cost center for the same. Once you make changes system automatically change the cost center in asset master record for the same.
Note: - Now you have to identify all the AuC Investment measure Assets and the WBS Element for the same. Then change the cost center in WBS Element record. And the corresponding changes will be done in relevant Asset master record automatically.
But before making the change please check with the PS/PM consultant regarding changes in WBS element. Means where it will effect?
With Regards
Ravinder Kaushik -
Asset master validation GGB0 and OACV
Dear All,
I want to create a validation in Asset maser time-dependent tab to make sure the Responsible cost center of the WBS element and Cost center of asset master should match, if not, error should thrown. my problom is in logical field group 3(time dependent data) already there is validation in OACV, so system is not allowing me to create one more validation in the same area, when i try it is throwing error " an entry already exits with the same key ".. so i written my logic in the old validation which checks location, it is working fine. and some people are saying when it moves to production it will overwrite the original one. but we moved from dev client to quality, we did not find any problom, both the logics in one validation are working fine, what happens if move to production,.
is it overwrite the old validation.
cant we give two validation in the logical field group 3( time dependent tab.),, your inputs are highly appreciated.
validation for asset master.- GGB0
per company code activation for asset master.- OACVHi,
You should simply add additional step in your current validation, without creating a new one. So, in OACV the definition stays the same; only there will be a new step within your current validation.
Regards,
Eli -
Change of Cost Center in Asset Master for Investment measure (AuC) Assets.
Hi,
We have an asset class 4001 which has been maintained as an investment measure for AuC. I want to change cost center for all the assets that are maintained in the asset class 4001. The system is showing cost center field in display mode in change transaction of the asset AS02 for all the assets in the asset class. I want to replace the old cost center with new cost center in the asset master record. How can I make the cost center field changeable ?
Can anyone help me ?
Regards,
K.S.KHi Kattula,
We can change the cost center for AUC with Investment Measure. To do this you need to identify the relevant WBS element assigned to your asset. You can find the WBSE in Origin tab of your asset master record.
Then go to the change WBS element Transaction CJ12 and change the cost center. Once you change the cost center of the WBSE, the change would automatically get reflected in the correspondind asset master record.
This would solve your issue.
Thanks & Regards
FICO GSupport team.
RK & IK. -
Screen Layout for Asset Master Data
Hi all,
we are using SAP ECC 6.0 with a base component 700 Level 15 and the Logistics and Accounting component 600 Level 12.
I hope you can help me with the following tasks. It should be said that I am not an expert FI-AA, so you must bear with me.
It is desired, that the Screen Layout for asset master data, should have an additional field "customer order" as a required field.
So I go to the Customizing
--> Financial Accounting --> Asset Accounting > Master Data> Screen Layout--> Define Screen Layout for Asset Master Data --> Define Screen Layout for Asset Master Data
--> and then into the third level of navigation in the u201Cfield group rulesu201D (rule for R & D development costs and then logical field group time-dependent data)
So there I should be deposited the "customer order" as a required field.
But:
1. The "customer order" is not available in any field group. How is it possible that I add the u201Ccustomer orderu201D to a field group?
2. I am not able to add any field, in the above transaction?
I am very grateful for any help.
greetingsDear all,
I want to come back to my problem listed above.
In the APC Values Posting (Transaction ASKP) the costs have been assigned to a WBS element. Now, it should not be assigned to a WBS element, but to a customer order.
For that I created in the asset master a new customer's own field "Customer Order".
For this I have implemented the customer enhancement AIST0002 (Customer fields in asset master).
The new field "Customer Order" is now available in the asset master as desired.
So far so good.
Now, the new field "Customer Order" must be specified and activate as an Account Assignment Object.
Is this possible and how can I add my new field to an Account Assignment Object?
Thanks in advance for any help.
greetings
Martin Buthmann
Maybe you are looking for
-
Is using a Delta Electronics DTX power supply in a Quicksilver 2002 risky?
After verifying that my original PSU was dead according to a procedure found in the forums, I purchased what was represented as an identical model (AcBel 614-0157 344W) but I received a Delta Electronics 614-0158 355W model instead. The main connecto
-
Hello, In our XI environment, we have two server nodes, quite offen i see lots of javacore?????????.txt is getting generated which causing /usr/sap/XIX is filled, due to this java goes down. As a temp fix, i am removing those files and restarting jav
-
Integrating SAP ECC 6.0 with Microsoft Windows 2003 Active Directory
Hi Gurus, We are planning to integrate our SAP ECC 6.0 with Microsoft Windows 2003 Active directory. I have several questions on this: 1. Can i authenticate all the users from SAP 2. It is used only for user authentication or can it be also used for
-
In control panel/display, I had my display set at 150% and at 1680 X 1050 resolution. This filled my 22 inch screen with the page content. Now that I have installed Firefox, the font is too small and the content is centered in the screen leaving abou
-
Call_outbound_plug and Fire_outbound_plug?
Hello What exactly is the striking difference between these methods? fire_outbound_plug is being called inside call_outbound_plug, as both are the methods of a same class cant we call fire_outbound_plug directly??? Regards Sanguine