WBS not updated during MIRO to asset

Dear Gurus
Our task is to post invoice directly to asset using ME21N->MIRO (without delivery) approach and get statistical WBS element commitments and actual values updated.
Commitments (ME21N with AAC "A") are working fine (using statistical cost element 90cat.)
During invoice posting (MIRO) no error generated; asset is capitalized with actual value; WBS element commitments reduced; BUT WBS element actual values not updated.
Configration:
1. Account assignment objects PS_PSP_PNR and PS_PSP_PNR2 activated
2. Acc.assign. objects specified in used depreciation area as "01 APC values posting" Acc.assign. type
Where could be the problem?

I agree, but in our case receipt (MIGO) is organizationally useless. And I don't want to belive this is the source of the problem. But I could be mistaken.
By the way I tried simulate process with MIGO - same issue.

Similar Messages

  • WBS not updated during asset invoice

    Dear all,
    I post an invoice through MIRO for an asset and i enter a WBS element. However, the line item of the asset is not updated and the WBS element is also not updated with the actual posting.
    On the other hand, if i enter an expenses account everything works perfectly.
    Any suggestions?

    Hi,
    Usually you should not assign Cost objects to balance sheet accounts. It has to be assigned only for Profit and Loss accounts.
    For assets you can maintain the WBS element in Asset Master creation AS01 and that WBS will be taken for accounting for any depreciation or expenses posted for that particular assets.
    thanks and regards
    Praveen.J

  • Apps not updating during sync

    apps not updating during sync

    It sounds like your iPad is sleeping or you lose your connection before the process completes.  Try plugging the iPad in to a power out and do the update.  Make sure you have a strong wifi signal. 

  • Statistic condition values not updated during Sales order Settlement

    Hi,
    In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
    We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
    For this purpose we have created one COPA Assessment Cycle.  Tracing factor is Sales Revenue and receiver is Materials.
    In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
    For this reason we have created one new statistic condition type,  what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
    Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
    So is it possible update during sales order settlement time statistic condition values.
    Please give me suggestion.
    Regards,
    Thiru

    Hi Ajay Sir,
    As you said is correct.
    But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field.  System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
    Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
    Please suggest me is there any alternative.
    Regards,
    Thirumalesh .

  • Service Tax condition not picking during MIRO

    Hi,
    Referring earlier posted thread,
    http://forums.sdn.sap.com/thread.jspa?threadID=2135441&tstart=0
    I want to know insert a Tax Code - VAT for 10% and a Condition Type - Service Tax for 10.3%...
    During MIRO, Service Tax Amount is not Picking... Why???
    There is any solution for it.....

    Hi,
    If we create Service condition type, then why need to create Tax code in FTXP and maintain in FV11...
    Why both things need to create...??
    No need to maintain
    check for your service tax condition type
    Cond. class   A Discount or
    Calculat.type A percentage
    Cond.category B Delivery co
    and you have accrual tick for your condition in t-code M/06
    also check in your pricing procedure you have assign account key and accrual key for your condition type in t-code
    M/08
    Regards
    Kailas Ugale

  • COPA Segment Not Updated during AFAB Run

    Hi Experts,
    While running AFAB run system is not recoganising the Product Category and Sales District
    which is maintained in " KEDR" .
    If we enter manually the entry in the system We will have to press one screen Derivation " Where it will pick up " automatically.
    Is there any solution for this,
    thanks,
    regards
    N. Kumar

    Hi Siva,
    I will brief the Scenario;
    We have one Asset Class for Low Value Asset.
    While running AFAB T-code System is not updating the COPA Derivation which is configured under KEDR.
    Where the same has been updated while AFAB run ie Normal depreciation Items.
    This is our problem,
    regards
    N.Kumar

  • Indexed field num_comments on blog post not updating during incremental crawl

    Hi,
    Have a webpart that rolls blog posts from MySite and other Team sites.
    Everything works fine excepts that the property ows_numcomments (which I have a managed property mapped to) is only updated after a full crawl has run (ie once per night or manually started).
    Why is it so and what can I do to make updating during an incremental crawl?
    Thanks,
    /Owe
    Background:
    Query resulttype is RelevantResults
    TrimDuplicate is true 
    MPNumComments is mapped to ows_numcomments
    Searchstring
    "SELECT Title, Author, Path, SiteTitle, MPNumComments, MPPublishedDate FROM SCOPE() WHERE scope='Blogs' AND contentclass='STS_ListItem_Posts' ORDER BY MPPublishedDate DESC";

    Can you do full crawl and check this property is getting updated. If not then either incremental crawl is not updating the value or there is some problem with the field configuration.
    Regards,
    Milan Chauhan
    LinkedIn
    |
    Twitter | Blog
    | Email

  • Account Assignment WBS not updated in Service PR

    Dear Expert
    I am creating Service Purchase Requisition from project but in Account Assignment only network is coming , our requirement is WBS as account assignment,
    in Account assignment tab WBS field is coming but WBs is not updating,
    pls suggest , is there any configuration issue ??
    rgds
    rkp

    I think it is standard .
    If you need WBSE then create manual PR with account assignment P.

  • Do not update in qty for asset transaction

    Dear all,
    the system update the qty field in asset master data when transaction take effects. But there is any why that qty field in asset master data do not update  after transaction takes place like when transfer from one asset "a" to asset "b" with t code ABUMN.
    asset a with qty 1 and asset b with qty 2 in the master record,
    when transfer from a to b the system must not update the qty field in asset master data that the system updates to 3.
    How can the system do update qty ?????
    regards

    Hi,
    This is the standard behaviour of the system.
    If a transfer takes place from asset X to asset Y, then the system adds the sending asset's qty to receving asset's qty, only if the both UOM are same.
    Often users create an asset master with values in qty fields also, but that qty field should be blank only, since the qty will be added to it through asset transaction only.(if earlier qty is 0 and transaction qty is 1, then it would be 0+1=1)
    In your case you might have created your second asset with 2 qty and transfered 1 qty from sending asset, so the system added the both quantities in receiving asset. ( 1+2=3), as you are aware of this.
    Thanks,
    Srinu

  • Calendar not updated during importing MS Project

    Hello guys,
    I tried importing our previous schedule which was in ms project format into p6. It was imported successfully but when i browse the calendar date, it was "??" . I try to change my default calendar & assigned 6day/work but still not updating when i go to the activities. Is there any fastest way to shange the caledar? As of now, I'm updating them one by one activities which is very difficult for me to change 900+ activities.
    Thanks in advance.
    nhel

    Hello,
    You can add the Calendar as a column, and then change the Calendar for the first activity (at the top).Next, select all activities. Then, press and hold the Shift key, click on the Calendar cell of the last activity (at the bottom), right-click and choose "Fill down". That should assign all the activities to that calendar.
    This method works while assigning all activities in a project to a single calendar, or while filtering out a group of activities and assigning them to a calendar.
    Another method is to use a customized Global Change, but the above method is a whole lot quicker and easier.
    Hope this helps!

  • HERKL (country of origin) not updated during material master upload

    Hi all,
    I  have a problem in material master update, when iam doing material master update.......i have uploaded more than 18000 records,
    where few ariund 800 records are not updated with HERKL( Country Of Origin).......
    Could you please help on the above query.
    Regards
    Jagadeeshwar B
    Moderator message: subject corrected, please use a more descriptive one next time.
    Edited by: Thomas Zloch on Aug 20, 2010 11:36 AM

    Have you analyzed what is common to the errors?
    is it the countries that are used in this cases?
    or is it a certain material type?
    do you have any succesfull update with a country that is among the failed ?
    Have you tried manually to enter this field  in MM02 for such a material?
    we can only guess, maybe a typo in the country code, maybe county does not have an Iso code, maybe the field in hidden in create transaction for this material type.....

  • Stock quotes will not update during market time, Have removed cookies and history. How do I remedy this?

    Stocks symbols will not update without closing and opening the portfolio or just clicking on the stock to get the real time quote.

    Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
    Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

  • Account ID (HKTID) is not updating in MIRO after saving the Invoice

    Dear Gurus,
    While creating invoice in MIRO I have filled the House bank and Account ID fields in the payment tab. After saving the invoice the House bank is getting updated but  the field Account ID is emptied so this account ID is not transmitted to the accounting documents.
    Please share your ideas to get the Account ID.
    Thanks in Advance
    Krishna kumar. M

    Hi Mukthar,
    Thank you for your reply.
    Both House bank and Account ID fields are there in BSEG table and MIRO screen as well. For example I can create manual invoice in F-43 with House bank and Account ID and both are updated in BSEG table. But in MIRO I have problem that document is posting only with House Bank not the Account ID.
    In FBZP we have proper house bank configuration settings as well.
    Your input is highly appreciated.
    Thank you
    Krishna kumar.

  • Payment terms changed not updated in miro

    Hi,
    I changed the payment terms in vendor master now i am booking MIRO it shows as old payment term only how to change???
    Rgds,
    Giri babu

    Hi,
    In Vendor Master did you change the Payment Term under Purchasing Segment ? Please also Note tht Payment which you entered at PO Will come by default while processing MIRO. you need to change the PT in PO First.
    Thanks
    Goutam

  • Files that "remember playback position" are not updating during sync

    I listen to long spoken word MP3 files that are not podcasts. I have the "remember playback position" option checked on these files. I will add it to my library, sync it to my 2nd gen iPod shuffle, then go play it. The shuffle will remember the playback position fine. When I plug it into the computer again, iTunes used to update the files on my computer with the new playback position from the shuffle. This is not the case anymore. The local files will stay at the spot where they were at the original sync (0:00 in most cases). The files on the shuffle will then go back to 0:00 as well. This is very annoying. Any ideas?
    P.S. I'm using the newest Shuffle that was released along with the 4th gen Nano (mine is the 2GB blue).
    I know this is supposed to work because I had a silver 1GB shuffle in 2007 that worked fine.
    Message was edited by: ajstahl

    ROFL I've named this thread "Shuffle Woes" in my favorites list. I seem to have fixed this strange and VERY elusive problem for now.
    I discovered a duplicate music file that had the same metadata as another music file. The only difference between the two files was the name of the physical file on the hard disk AKA the file name. The metadata (tags) were exactly the same. Now that I've deleted one of the two files everything seems to magically work again. Don't ask me!
    If the problem resurfaces again I'll be back. No more shuffle woes!

Maybe you are looking for