Wbs plan data in report painter report

Hi Gurus,
Can we have wbs plan data in report painter report....
Can we use faglflext table for this???
Thank you

Hi,
FAGLFLEXT table for GL totals, for controling generally we use CCSS table and for PS may be you can use RPPS table not sure

Similar Messages

  • Data of the Report Painter report

    Dear ALL,
    I have the Report Painter report. When I'm executing this report I can save the data into the extract.
    Could you tell me where are these data in the system(table?)? I want use these data for SAP script form.
    Best regards,
    Igor

    Please go through the enclosed document. This will give you step-by-step approach for Report painter:
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Check url
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
    Just go through These Links to learn about report Painter.
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Please go through the enclosed document. This will give you step-by-step approach for Report painter:
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Check url
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
    Just go through These Links to learn about report Painter.
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
    Please see these steps , it`ll help you ...
    http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
    regards
    vinod

  • Data for Report Painter report

    Hi Gurus,
    I have a report painter report S_ALR_87013019 . This uses the
    Library 602 (gr23), report - 60BU-001 (GRR3).
    Need to create a regular report based on this, Can you Please tell from which tables the values are getting retrieved by this report painter report, or in general on how to trace back the tables used by the report painter.
    Also if it uses Set ID as inputs for fetching data, is there a way to get the setid/setclass value.
    Thanks,
    Regards,
    Raman

    Hi
    The As on Date balance cant be cumulated...
    Eg; you bought inventory worth 10 million in Current year and as of now you have 4 million worth of inventory in stock
    Cumulated bal in this case is 10 mil and As on Date balance is 4 million... 4 million is what you will get in SAP reports
    The same Key figure which shows values in comp code currency can be used
    br, Ajay M

  • Selection values in Report Painter Report

    Hi All,
    I am creating a report  painter report for Plan/Actual values using  library 0FL.In my characteristic value column I included fiscal year as a  value and  hard coded the fiscal year so i dont need this parameter in my selction screen.When I execute the report the fiscal year is coming in the selection twice.i.e:
    Fiscal Year
    Fiscal  Year
    Company Code
    Period
    From Profit Center
    To Profit Center
    How do I wipe out this fiscal year from my selection screen? In GRR2 -> EDIT--> General data selection , I only have  profit center values.I dont  know why this fiscal year is coming up as a selction parameter when I hard coded in the column.Any help.Thanks
    Regards
    Shaun

    HI Shaun
    In GRR2, Against the char, there is a check box where in you specify to treat it as a variable.. DId you check that box? Unless you check that, it wont appear in the selection screen
    Regards
    Ajay M

  • In report painter report, line item level drilldown report requirment

    Dear All,
    I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
    Please sugget anyone, where I am doing mistake in report creation level.
    Thanks
    M Srinivasa reddy
    Ph : 9637399076

    Thank you,
    I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
    Thanks
    M Srinivasa reddy

  • Profit center group number on the report painter report.

    Hi,
    We have a client requirement where we have to develop Profit center by Functional Area report by using report painter report functionality, however we are able to bring profit center group description on to the report as per the requirement, but not able to get profit center group number displayed on the report.
    Can anyone please advice me if we can get the Profit center group number displayed on the report in Report painter report. Else let me know if we can get the requirement met by an ABAPER.

    Hi.
    First of all, through transaction GS01 create a set ID for profit centers.
    Give table GLPCT, let the set type be the default (basic set) and give field name RPRCTR. Then define the range of profit centers you want. If you want all the profit centers give * in the "from value field".
    Then create a variable through transaction GS11. Give table and field as above, choose variable type set and at the default set field choose the set you created.
    Finally, at report painter go to Edit/General Data Selection and select profit center.
    Check both flags (for entering sets and variables) and give at the form field the variable you've made.
    Now the progit center group will be available in the selection screen with default value the set you've made.
    Regards

  • Selection Field in Report Painter Report

    Dear All,
    Could any one tell me the procedure to add new field at selection screen for the report painter report ? To change the report painter selection screen i have to change the Report group or Report of the report group?
    Thank in stack

    In general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast),  and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
    Thank in stack
    Nilesh Shete

  • Report painter report in portal - Excel output in SAP GUI for HTML

    Dear sirs,
    I need your expertize. I would like to let my users display (Excel in place)/ save the result of my report painter reports into MS Excel. I have found notes 499262 a 314568, but didn´t understand the message (or there is no message:)). Does that mean I cannot use Excel in place together with Report painter and SAP GUI for HTML?
    Second question: is there a place (user exit in generated code? I don´t even know what I am looking for) to get the data provided by the report painter engine and send the retrieved data to some custom function (to be able to call the Adobe form, to save it as a text file or any option how to manipulate the resulting data...?).
    thank you for your time and effort,
    regards Otto

    Hi Otto,
    You can send print the report to the spool and then use RSTXPDFT4 program to convert this spool to PDF file. Alternatively, you can export the spool to spreadsheet or ASCII file via SP01 transaction.
    Additinally, I'm not aware of unability to use Excel output with SAP GUI interface.
    Regards,
    Eli

  • Value Type and Report Type in Report Painter Report

    Is there a way I can get both characteristics WRTPP and RRCTY in one table? Or, can I work with two different tables in creating Report Painter report? I need to get the planned values of cost elements with record type 1 and value type 10 to show under one column in my report.
    Your help is very much appreciated.
    Edited by: Mauricio Villa on Oct 23, 2010 10:32 PM

    use the selection criteria to restrict the field types in the query designer- use other variables to check the value
    if it doesnt reconcile- you can alternatively use a multi provider for the same thing- that way you will get the same amount in 1 column and you could restrict using the infoprovider column

  • Issue with Report painter report

    Hi Gurus
    I need your help with an issue with one of our report painter reports. I have created a new report with Fiscal Year, Ledger, Company code, and Account number range in General data selection. The report row has field Segment and each period corresponds to one period of the fscal year. In here, I have selected Period and Record type 0 as characteristics. The basic key figure is KSL for second currency.
    I am able to save the report but when I execute it, I get the error that
    *Characteristic GJAHR cannot be combined with key figures*
    Can someone please help me as why I am getting this error?
    I appreciate your help.
    Thanks,
    Shalu

    Hi
    I think you have to rechek the genral data selection setting , related to fiscal year.
    had u defaulted the fiscal year or used variant for fiscal year
    Thanks
    alok

  • Report Painter/ Report writer

    Hi,
    Can anybody please explain me what is report painter with an example to how to create it if u have any document please forward it to me <REMOVED BY MODERATOR>
    also please explain me what is characterstics, key figures set and variables,
    <REMOVED BY MODERATOR>
    Regards,
    Sunil Kumar Mutyala.
    Edited by: Alvaro Tejada Galindo on Feb 26, 2008 6:19 PM

    Hi,
    Report Writer enables you to report on data from multiple applications. Using functions such as sets, variables, formulas, cells and key figures, you can create complex reports that meet specific reporting requirements.
    The Report Painter is similar to the Report Writer, but is simpler to use.The main components of report painter are characterestics and basic key figure.
    The majority of reports end users use in the R/3 System is Report Painter reports. Most of these reports (@ 80+ %) began as Report Writer reports.
    The major difference is Report Painter uses a graphical interface (analogous to Notepad and MS Word).
    Very few R/3 users employ Report Writer – however, many still use, modify and develop reports using Report Painter. Report Painter permits complex groupings and drill-down reporting – very useful for such applications as FI-CO and SD. It can also be used interactively – allowing users to enter variables for specific steps; thereby permitting ‘drill-across' functionality.
    However, Report Painter does have its limitations; it can display only numeric data (excluding column headers) – therefore, short text, etc. is not available. It is much easier (quicker) to modify than ABAP and requires no ABAP expertise – however, many combine Report Painter with ABAP reports to fill-in many of the missing pieces. Layout design is archaic and rudimentary ~ therefore; many use Report Painter to ‘retrieve and massage the data' and eventually export it into Excel for end use.
    also check the link
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Please go through the enclosed document. This will give you step-by-step approach for Report painter:
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Check url
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
    Just go through These Links to learn about report Painter.
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Please go through the enclosed document. This will give you step-by-step approach for Report painter:
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Check url
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
    Just go through These Links to learn about report Painter.
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
    Please see these steps , it`ll help you ...
    [http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp]
    <REMOVED BY MODERATOR>
    Cheers,
    Chandra Sekhar.
    Edited by: Alvaro Tejada Galindo on Feb 26, 2008 6:19 PM

  • Function Modules to Execute Report Painter Report

    Hi Experts,
    May I know if there is any way to execute the GR55 Report Painter reports, and get the report result back as a table?
    I need this to write a program to export the result to a external system.
    Many thanks!!!
    Regards,
    Chris

    I am actually expecting a ABAP way to do so, but not to do that in foreground manually.
    I found the solution anyway by using the below sample code:
    *&      Form  frm_retrieve_data
          text:Get report painter Result
    FORM frm_retrieve_data .
      DATA:lt_params  TYPE STANDARD TABLE OF alv_s_param_wp,
           lwa_params TYPE alv_s_param_wp,
           lwa_msg    LIKE LINE OF gt_msg,
           lv_dcpfm   TYPE xudcpfm.
      CLEAR:gt_data,gt_msg.
    Set report painter Paramters
      lwa_params-pname = '$PARAMETER[$ZRYEAR0'.
      lwa_params-pvalue = sy-datum+0(4).
      APPEND lwa_params TO lt_params .
      lwa_params-pname = '$PARAMETER[$ZBUKRS0'.
      lwa_params-pvalue = 'JNPC'.
      APPEND lwa_params TO lt_params .
      lwa_params-pname = '$PARAMETER[$ZBUKRS1'.
      lwa_params-pvalue = 'JNPC'.
      APPEND lwa_params TO lt_params .
      lwa_params-pname = '$PARAMETER[$ZF-RP00'.
      lwa_params-pvalue = sy-datum+4(2).
      APPEND lwa_params TO lt_params .
      CALL FUNCTION 'CRIF_RW_WEB_CALL_REPORT'
        EXPORTING
          i_report_group = 'JNZ1'
        TABLES
          it_params      = lt_params
          et_data        = gt_data
          et_messages    = gt_msg.
      LOOP AT gt_msg INTO lwa_msg
        WHERE type = 'E' OR type = 'A'.
        gv_flg = cns_yes.
        EXIT.
      ENDLOOP.
      IF gv_flg IS INITIAL AND
         gt_data IS INITIAL.
        gv_flg = cns_nodata.
      ENDIF.
    ENDFORM.                    " frm_retrieve_data

  • Issue in GR55 report painter report not able to pass Exclusive values (E)

    Hi all,
    According to client requirement we have added selection values in P&L Report Painter report.
    We have an issue we can only select data/range of data that we want to include(sign = I -inclusive) in the report. I cannot exclude values(sign = E - Exclusive).The error message  get is as follows.
    Message no GR107
    Diagnosis:
    You can enter intervals or single values fo certain fields.The system only supports inclusive intervals(Opertaors BT I) or inclusive single values(operators EQ I).
    We found that its standard behaviour..Is there any SAP note to come over this or any other solution....
    Regards,
    Greeshma.

    Not possible....SAP standard behaviour....

  • Zero balance display in report painter reports

    Hi all,
    I have an issue with some report painter reports where the "print zero balances" flag is switched on in both the report and the section layouts, however the accounts are still not appearing on the report.
    The accounts do not have any postings in the current year and the Bal carried fwd was zero in all profit centres but my client would still like to see a zero value on the report.  Any suggestions?
    Many thanks
    Phil.

    Also, when I display the balance of the accounts that appear on the report in FAGLB03, I get a screen showing a zero balance in all periods.
    When I display the balance of the accounts which do not appear on the report in FAGLB03, i get the message that "no data exists for fiscal year 2009".
    I have tried re-running the balance carry fwd transaction but this has had no affect. 
    please help!
    Thanks
    Phil.

  • Drill down issue in report painter report

    Hi-
    We have an issue where the drill down in one of our report painter reports isn't working.  When the user tries to drill down, it says the list contains no data.
    However, if the target report (of the drill down) is run first, and then the report painter report is run, the drill down will then work properly.
    We need to know where to check to get this fixed.  It has us stumped.  The report painter report is associated with a report group.   
    Thanks,
    Kevin

    Just needed to update the variant from the calling program's report group.  Duh.

Maybe you are looking for