WBS Report Showing Change logs - ex: system status

Hi,
I would like to know if there is any report that would show the change log for AVAC for WBS Elements (i.e. change data of system status). I tried running CN60 but it does not give any results.
Thanks!
Vivian

Hi Sarang,
Thanks for your reply.
Would you know if there is any specific report for this instead of having to look up individually?
Also, in order to view the change document for both Project Definition and WBS Element, I understand there is some config that need to be done. Could you confirm if below are complete / correct?
- project profile - tick on change document (OPSA)
- Project Definition and WBS Element status profile (user status profile) - set business transaction to allow "create change document"
Thanks!
Vivian

Similar Messages

Change log for system status of Building

Dear Experts,
Would like to inquire if there is a tcode that can be used to view logs for change in system status of building in RE-SD
Thanks in advance.
Kathy

Hi Kathy,
when ever there is error we check using
-> BPIA
-> ECATT error log or BC set error log
-> SECATT tcode can be use dfor the purpose
With every Package there is a installation guide which has further information for the things about the package being used.
Have a best day ahead.

Change the user/system status when PP order is packed through COPP1

Hi All,
We have a requirement to set the system or user status for a PP order. The flow is the transaction COPP1 is used to pack the order for different dates. Now there is a button available on the toolbar when the second screen comes and it shows the data for different dates.
Is there any user exit or badi available to change the user or system status when tcode COPP1 is used. We want to change the status when the order is packed through tcode COPP1.
Has anyone of you come across such kind of requirement before if yes then guide me how to solve this problem. If there is other way out also let me know.
Thanks,
Mark

Hello,
I am not aware about COPP1 transaction and fuctionality but production order change (automatic) is possible from Status profile settings. Create a status profile with your desired statuses and assign this to ordey type.
Regards
TAJUDDIN

Change PO--error "System status ITRE is active".

Hi,
When I am trying to release a PO manually i am getting one error message "Error changing to status RELP, System status CMPL is active" in transaction code SWO1.
Thanks,

Hello,
ITRE status means: In Transfer to Execution Syst.
Reprocess the PO using BBP_PD_PO_TRANSFER_EXEC.
Helpful Note: 1090580
Hope this helps.
Thanks
Ashutosh

Change Inspection Lot System Status

Hello. This forum has been very helpful in the past. Am a novice.
We have a material that wasn't completely set up when the inspection lot was created. An operation 20 needs to be added. Operation 10 exists, but no results recording have taken place yet. Current status is REL CALC SPRQ ORRQ. Since the inspection is released, we can't change the key date. How can we get it back to a state where we can update the key date?

Yes, I do mean that only. You need to reset the inspection lot using T code QAC3.
Go to QAC3>Enter inspection lot number> Hit Enter> Save> Terminate the transaction.
Then, refresh the inspection lot in QA32, you would see it with system status CRTD*.
Next, go to QA02> Inspection lot num> Insp. Specifications> Change the key date to today> Click on Task list/spec (It will display the message that inspection plan *** has been assigned to inspection lot.
Then, click on Sample> Smpl. > Save.
You'll get the inspection lot with REL* status with latest Inspection plan assigned.
ntn

Site Web Analytics Report Showing Users Logged in as Both UPPERCASE and lowercase domains (SP Foundation 2010)

When looking at the Site Analytics Report in SP Foundation 2010, I see that many users (though not all it appears) have been logged under the 'Top Visitors' section as both "DOMAINNAME\username" as well as "domainname\username". This makes it hard
to get actual counts of hits the visitors have made since they show up in two places on the report. In my case, I always log in using the same credentials (more recently I have had permissions upgraded so log in is automatic), yet I still see that I
get posted for different usage numbers under the uppercase and lowercase instances. Does anyone know why this would be occurring?

Even i am facing similar kind of problem. Some of my users are displayed as DomainName\ID while some are displayed as Lastname, Firstname. I think we need to know the location where these reports are stored.

Issue in Report RPAUD00 - Change Log

Dear Experts,
I want to execute the report RPAUD00, but the report output is completely blank. I searched on SDN for similar issues, and came to know that the following tables needs to be customised:
1. V_T585A
2. V_T585B
3. V_T585C
I have done the required settings in V_T585 A as below:
Unable to understand V_T585B. What will be entered in Field Group? And also, if I want to know changes done in all fields in a particular infotype, will every field be entered? can anybody please show me a dump of the table.
Also, in table V_T585C, does the values populate automatically after entering in the V_T585A and V_T585B tables?
Please help me for my queries.
Thanks and Regards,
Bhagyashree

Hi BN,
After configuration of these 3 tables, if any changes done in the Employee master data are seen in the Report RPUAUD00 / S_AHR_61016380. before changes will not appear in the report.
for your reference attaching screen shots.
585A
585B
585C
Regards.

Report on Change Logs

Hi Guys
Is there a report/transaction in SAP where I can view all the changes that have occurred on the Customre/Vendor master data... other than the XD04/XK04..
Thank you
Rukshana

Hiya
And what help would that be?
i can execute the tables cdpos & cdhdr but I need this infomation for the users to run at day end...
Rukshana

Report showing changes in Personnel group/subgroup

Hi,
We need a report that lists employees who have had changes in ther personnel group and/or personnel subgroup. Is there a standard report we can use, or do we need to write our own?
Thanks in advance
Kirsten

Hi Kirsten,
I haven't come across any such report that gives only data related to Employee Group / Employee Subgroup changes......
You will have to write Custom Report to achieve this functionality.
Check this,
There is a program RPUAUD00 (Trailing two characters are zeroes) provided by SAP which allows us to see any changes that happens to data in an infotype through add / modify / delete. When you execute this this program and specify the employee code and infotype in the selection screen, it gives us details of when the data was changed, who changed the data and what data was changed in a particular infotype.
Good Luck !!!!
Kumarpal Jain.

App updates not showing change logs in iTunes 12.0.1.26

As above, since the new update and then the update with Yosemite when i go into the app section and go to updates the showing updates now only show the basic info. It does not show what the new changes have been, minor i know but i do like to know what the changes are so i can wait for a future release before updating as some of the apps are huge downloads now.
Thanx

I'm having a similar issue, but cannot see anything to do with airplay in the SysPref > Sound menu. My mac is too old to run Yosemite, so looking to find another way to get this fixed. Any ideas?

Report: user/systems status with change details for a project

HI.
I am aware of CN41N/CN43N transaction.
Is there a way to pull a report for a project with system status, user status and the details of who made the changes with date and time???
thanka a lot in advance
Regards
SURYA

Hi
If you have change documents active for status management and project profile then you can get the data from JCDS table directly (changed status and who changed it). Note that you will get the status in SAP internal code and you need to refer TCJ30 table for status.

Project definition system status change details

Dear PS experts,
Request, kindly let me know which report is available to show the system status change from
crtd to rel
rel to teco
teco to clsd
we would like to analyse which date or period the system status changed thru edit-status
from crtd to rel
rel to teco
teco to clsd
we don't use any user status.
i have checked cn60 & all reports from cn41 to cn47, but i don't get any report states about the change details of system status.
pl help
srihari

thanx,
can u pl tell me about cn60 std report, does this use for system status change or any other purpose, pl let me what purpose this report is available for us.
i wanted to know only the changes taken place in project definition with regard to crtd to rel or rel to teco or teco clsd, there should some report which will give this data without touching the tables.
pl help
regards
Srihari

Change the system status

hi all,
I want to chang the equipment system status to equipment at custome site, how to do this please guide me,
thanks
Amit ranjan

hi,
check these transactions.
IA02 Change Equipment Task List
IB02 Change Equipment BOM
IB05 Change Equipment BOM Group
IB08 Change Equipment BOM - Plant Alloc.
IE02 Change Equipment
IE05 Change Equipment
IE06 Change Equipment
reward points if hlpful.

Error in F110: System status CRTD is active (ORD 603625)

Hi All,
In APP, one of the vendor is going in to error .
The log says System status CRTD is active (ORD 603625)
When I check, for the particular item in vendor line item display, that is linked to the
purchase order, which in turn is linked to the internal order 603625 . The internal Order 603625 is
in CRTD status.
I think the status of the order needs to be changed to TECO.
But I have two questions here.
1. What factors should be looked in to before changing the
status of the order to TECO.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Regards
Rudra

Hi Rudra,
You received this error from the Status Management of the Internal Order.
1. What factors should be looked in to before changing the status of the order to TECO.
Actually, you should not change the status to TECO (Technically Complete) rather you should Release it then APP will be processed.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Every status in the Order is assigned to the Transactions Allowed
Common Scenario
1. When status of the order is CRTD then you can only post budget to the order, you can not make FI Posting.
2. When status is RELE then you can make an FI Posting.
Ask the owner of the Internal Order to shift the status if conditions have been met.
Regards,
Chintan Joshi

Change Logs for customer master data in 3.1 H version

Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.

Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K

WBS Report Showing Change logs - ex: system status

Similar Messages

Maybe you are looking for