WBS: Settlement Parameters: Settlement Profile - To change to non mandatory

WBS -> Costs -> Settlement Rule -> Goto -> Settlement Parameters
The settlement profile field is mandatory, is there any way to turn off this by config?
Regards,
Feng Hwa

Dear,
You can assign default sattelement profile that is not relevent for sattlement to the project profile.
This can help you.
Regards.

Similar Messages

When we change the non-mandatory field in the form, it doesn't get updated

Hi... I have one question here..
If I have non-mandatory fields in a custom form, and when I query the form and change the value in the non-mandatory field and click on save, then it doesn't save. It says 'No Changes to Save'. But, it's not the same for non-mandatory fields.
Can you please suggest me?
-vrdida

VRdida,
If I understand correctly, you have a non-Required item in your form that has an LOV assigned. While this item is Required=No, it works correctly. When you change the Required property of the item to 'Yes' then it fails. When this occurs, do you get an error message? Are you able to select a value from the LOV?
It sounds like the Required=Yes property might be preventing you f rom opening the LOV. Try setting the Module property: Defer Required Enforcement = Yes. This is the typical setting in an EBS form. This is what allows you to navigate out of a Required field if the value is NULL, but will give you a Required message when you attempt to save the record if the value is still NULL.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Apr 6, 2011 11:43 AM

Block direct postings to WBS but all settlement

What is the best way to block FI postings to a WBS Element but still allow settlement transactions?
I have projects where the top most WBS element only accumulates costs from lower level WBS elements and settles to an AUC. Users are posting directly to this top level and it's causing budgeting and reporting issues. I can stop the posting by locking the element but the project will no longer settle.
I've considered creating a new user status and validation rule to stop specific types of FI postings. Is there a better way to stop unwanted postings to specific WBS Elements?
Thanks,
Jeff

User status was the best option. I created two new user status, one called Block Posting and the other Allow Postings.
The new Block Posting status was set to forbid FI Postings and forbid various MM postings, this stopped postings but still allows project settlement to occur. The new Allow Postings status is set as the initial user status and has no restrictions so by default all WBS elements allow FI postings and the project manager can select which elements to block as the are created.

Difference between Full settlement & periodic settlement

What is Difference between Full settlement & periodic settlement, & how these works works on orders. Can anyone tell me that how can I check result for the same. (Kindly mention t-codes also)
Regards.....Kaushal

Hi,
Please find below some salient features of each os the settlement type you have asked for:
1. Periodic settlement -
a) Will have Product cost collector as cost object (both REM and Descrete scenarios)
b) WIP and scrap variances are based on Target costs
c) Variances are recognized in the month in which they are actually incurred based on the target costs. Varainces = Total costs - GR - Target WIP
d) Default rule in OPL8 should be periodic settlement
2. Full Settlement
a) Manufacturing orders will be costs objects
b) WIP will be at actuals. WIP = Total costs - GR value
c) Varainces will be recognised only when the order is fully delivered. till that time though there are variances, they will not be recognized but will be included in WIP value. This is the key aspect of Full Settlement
d) Default Rule in OPL8 would be full settlement
T.codes relevant:
KSV5     Run dist cycle
KSU5     Run assessment cycle
KSUB     Run assessment cycle
KEU5     Run COPA assessment cyle
KKA0     Change Cutoff Period for WIP
KKAS/KKAX     WIP - Individual Processing
KKAO     WIP - Collective Processing
KKS6/KKS2     Variance Calculation - Individual
KKS5/KKS1     Variance Calculation - Collective
KK87/KO88     Settlement - Individual
CO88     Settlement - collective
*For Sale Order controlling     *
KKA3     Execute Result Analysis - Individual
KKAK     Execute Result Analysis - Collective
VA88     Sale Order Settlement
Best Regards
surya

Firefox will not open and my profile name changes, after I creat a new profile it works until I try to open again

Firefox version 16.0.2 was working I have used FF for years. A few days ago it started to run very slow opening web sites. Then this morning when I tried to open it I saw a progress bar that looked like the kind I see after an update has been applied but FF never opened.
I rebooted my windows 7 64 bit and tried again, nothing FF would not open and I got no error message.
So I opened the profile manager and only found a default profile not the one I created last year with my name. I created a new profile and browsed to my old profile folder. FF opened and ran fine until I closed it and later tried to open it again then I kept getting an error box telling me that FF had crashed and asked if I wanted to send a report and restart, I did but no good it still would not open.
I ran the profile manager again and found my profile had changed name to a bunch of numbers. I delete that profile but kept the folder then made a new one and that worked. I shut it down again and once again I get the We're sorry error box.
By the way I had set the profile manager to open when FF loads and it is not opening so the problem is before it gets to that command.

First I already have my view set to show everything so that is not the problem.
But I just tried opening "Computer" from the start button then type in profiles.ini in the address bar and hit enter. The profile manager opened with my profile listed. I selected it and hit start firefox and it opened as it should.
I closed it again and tried to open it from the shortcut in my task bar and I got the Sorry window.
But then I tried to open it from the short cut you get when you press the start button and program list and it work!
I went back to my desk top and tried the short cut on the desk top and it worked.
So I deleted the short cut on the task bar and created a new one and it worked.
I rebooted the computer and tried again and the task bar shortcut works and has the right profile.
So it seems that the problem is that the short cut was corrupted and was causing the error that caused the program to fail to open.
I had no idea a shortcut could do that. In the past I have had short cut stop working but never do what this one did.
I still have no idea where the profiles.ini is.

WBS elements in Investment profiles

Hi Experts,
Is there any way we can check that to which all WBS element an investment profile is attached?
Regards,
Vijay

Hi Vijay,
If an inv. profile (or other customizing settings) is used somewhere, it must not be deleted in the customizing table, otherwise it cause database inconsistency.
To forbid the user to maintain this field at wbs, you can use the
customizing item
'Define Field Selection for Work Breakdown Structures' to hide\disable the filed. in the following path: Project System -> Structures -> Operative Structures -> Work Breakdown Structure (WBS) -> User Interface Settings.
Please reward points, if it is helpful.
Kind regards,
Zhenbo

List of Orders - Fully settled / Partially settled / Not yet settled

Hi All,
Is there any standard report which gives the list of all those PM orders which are related to settlement.
i.e. Fully settled / Partially settled / Not yet settled
I tried to see the report in IW39 by comparing the fields such as 'Total actual costs' and 'Total settlement', but the 'Total settlement' field is always having the value as 0.00, irrespective of whether the order was fully settled / partially settled / not yet settled.
Any help on this is appreciated.
Thanks in advance. JK

Fantastic Pete !
I was able to get the answer throughy the foll. T Code / Report:
1. KOC4: Order selection
2. S_ALR_87013015: List: Actual Debit/Credit
Many thanks for the help.
Best Regards
JK

SAP parameters need to be changed after memory upgrade

HI,
Recently we had the memory in few systems increased by 2-4 GB. Do we need to change any SAP/DB parameters due to this change?If yes, what are they? Info: Platform is AIX/Oracle, ECC6 and BI 7.0
Regards,
Arindam

Thanks for your reply.
No, I mean the memory has been increased by 2 - 4 GB. For e.g. in one system memory was 16 GB, it was increased to 20GB. In another system the memory was 12 GB, it was increased to 14GB. What I want to know is, because of this increased memory space are there any parameters in SAP/DB that also need to be adjusted according to the amount of memory space(hardware) added?
Regards,
Arindam

Mac bookpro color profile intermittleny changes.

My Mac book pro's color will randomly change to a blue tint (from Color LCD to either CIE RGB or ColorMatch). To fix it, i can go into the color profile and change it back there, but thats becoming a pain in the butt. Is there a way that this can be fixed? Maybe deleting the colour profiles that i do not need... thanks a lot, grant. sorry for the repost.

2 solutions for you:
1- In the system preferences-->Display-->choose the color tab, then select the profile you want then check the "Show profiles for this display only" option,
this will make all the other profiles disappear from the list.
2-go to HD-->Library-->preferences-->ByHost and delete: com.apple.preference.displays.(numbers).plist
then reboot.
Hope that is helpful
sasa
Message was edited by: sasa43

I'm apple user. some one has hacked my user ID profile & has changed my security questions. Also hacker has give rescue email , which is absolutely unknown to me.Resultantly i can't make any purchase from apple. How apple can help me. Thank

I'm apple user. some one has hacked my user ID profile & has changed my security questions. Also hacker has give rescue email , which is absolutely unknown to me.Resultantly i can't make any purchase from apple. How apple can help me.
Thanks in anticipation.

You will need to contact Support in your country to get the security questions reset (these are user-to-user forums) : Apple ID: Contacting Apple for help with Apple ID account security (if your account's password has been changed then they should also be able to reset that for you)
When they've been reset you can then use the steps on this page to change the rescue email address to an account that you have access to, for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses

Delete Configuration Profiles from Change Number.

Hi Gurus,
i want to delete Configuration Profiles from Change Number.
while executing tcode cc02, i am not able to find configuration profile under object tab.
would you please tell me how to delete Configuration Profiles from Change Number?
Thanks
Amit dhar

Hello Amit,
I'm not sure I understand your requirement quite well. But let me share some stuff I know and make a humble attempt to address your question. Firstly by configuring the profiles we are only making certain data entry easier for the end user and also making the change data manageable. By Configuring Profiles we can default the values such as,
Change number status
Authorization groups
Reasons for change
Status Profile
Object type profiles
Most of the above objects / values are modifiable using CC02 till it becomes ECO and few like status till the change number is released.
I'm hoping this helps, if not please be little more descriptive about your requirement.
regards
C

Apple tv 2 - root password has been changed to non default. I need to access apple tv 2. how do i get access with a forgotten password

apple tv 2 - root password has been changed to non default. I need to access apple tv 2. how do i get access with a forgotten password

Welcome to the Apple Community.
It depends on which password you are referring to, but generally speaking you can always restore the Apple TV.

Material master change with ECN mandatory?

Dear All:
How can I make the field of ECN number mandotary in case of material master changing? Thx.
BR
Kevin Dai

Hi,
For making Material Master change with ECN mandatory you need to activate ECM.
For more details of ECM, pls go through the following link :
[Engineering Change Management|http://help.sap.com/erp2005_ehp_03/helpdata/EN/64/a49a382ba4e80fe10000009b38f8cf/frameset.htm]
Hope this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Nov 14, 2008 8:29 AM

Consignment Deliveries: Handling Unit Changes to Non Assigned HU

Hell Experts,
We are having an issue with the consigment deliveries. After doing the PGI, the handlling unit assignment changes to Non Assigned Handlling Unit.
Situation Before PGI:
VEKP-VBOBJ = 01
VEKP-VBOBLKEY = <Delivery Number>
After PGI: (Movement Type Used is 631)
VEKP-VBOBJ = 12 (Non Assigned handlling Unit)
VEKP-VBOBJKEY = <Delivery Number>
The handlling unit is assigned to the delivery but the field VBOBJ changes to 12. We could see the handlling unit in the delivery but the assignement is not 01. Logically, the field VBOBJ should be 01. (Because we are able to see these HU in delivery).
If I reverse the PGI, then VBOBJ again changes to 01. Also, if I pack all the material into one HU and leave another HU empty then after PGI, VBOBJ for empty HU is 01 but for packed HU it is 12 (with VBOBJKEY = Delivery Number)
I don't know why the assignment is 12? Are we missing anything?
Thanks,

are u already solved this issue ? can u please tell me how to solve it ? and I why the assignment turns into 12 ?
thanks
regards
Henny

Created batch material and made po, migo,miro now change to non batch.

Hi All.
I have created Batch Material mm01 with batch management check box.
Created PO and donetransaction of migo, miro.
Now i want to change to non batch material.
i like to remove batch management check box in mm02
Regards.
Parameshwar.
Edited by: Csaba Szommer on Jul 7, 2011 9:23 PM

Thanks Kunal.
I will Click on display errors for the list of open documents.
Then i will clear all documents.
Next I will change MM02 by removing Check box to normal material
It should work for me.
My Doubt is after this also i need to run the program to change to non batch material.
Clarify me about program running.
Regards.
Parameshwar.
Thanks MM dudes.

WBS: Settlement Parameters: Settlement Profile - To change to non mandatory

Similar Messages

Maybe you are looking for