WBS settllement to Asset

Hi,
I am trying to create the settlement rule for the WBS element with category Asset. While assigning asset under construction (which is created by this WBS element) it is giving the error message "You can not post to asset XXXXX".
Please tell me what may be the cause?
Shall we can assign asset under construction as settlement receiver or not? 
I am not from finance background please help me to fix this issue

Hi,
If you are using the investment type of project with the "investment profile" , system creates the asset under construction for the respective WBS.(provided u have done required setting in investment profile)
You need not to mention settlement rule manually to WBS in this case. It will be created automatically.
When you run period end settlement, the settlement rule for WBS to its associated AUC will be written automatically.
Regards

Similar Messages

  • System is not picking up the WBS element from Asset in PO.

    Hi,
    While creating Purchase Order with account assignment category
    as "A"(i.e.Asset), system is not picking up the WBS element from Asset
    Master, even though it is defined in the asset master.
    Please help.
    Thanks,
    Ninad

    Hello Ninad,
    Please, see the SAP Note 21583. I think it might be of help for your case.
    Best regards,
    Esther.

  • WBS Elements and Asset Under Constructions have different Cost Centers

    Hello Experts,
    We have created a WBS element in one of the projects.
    As per standard process, when we create the WBS Element the Asset under construction is also getting created through the settlement rule within the WBS.
    These assets should have the same Cost Center as the WBS has. However we are in a situation wherein the Cost Center in the asset under construction is different than the Cost Center in the WBS.
    I have checked the settings like automatic account assignment, etc but all settings look correct.
    Can you please explain first what could be the reason for such a difference between Cost Centers in WBS and AuC's and what is the solution to avoid it in future?
    Thanks in advance
    Leena

    Thanks for your replies...
    @ Alex - There is no Investment Programme ID maintained for this WBS in question since there is no IM for this project.
    @ Abdul - Please elaborate more on Validation and Substitution.
    Regards,
    Leena.

  • How to use WBS element in Asset master data upload

    Dear All
    Does any body know how to treat field WBS element in Asset master during upload.
    Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
    I vaguely remember tht with wbs system internally assign a different number.
    Has anybody come across this issue?
    Please help
    Thanks
    Sanjeev

    There are in the asset 2 fields for PS
    One is filled when you do an settlement from an WBS (is not possible to fill in)
    The other one you found in the the tab time dependend like cost center.
    This field is available when you have assign the possibilety to do depreciation to an WBS.
    Paul

  • Is there standard report to get the WBS by using asset number

    Dear All,
    Please advice, is there any standard report to get the WBS by using asset number ?
    Thank you.
    Nies

    We can get WBS report by using costcenter - S_ALR_87011966

  • WBS element in Asset Master (Period Dependent Tab)

    Hi
    I have activated the WBS Element in Account Assignment Object in Asset, which has resulted in WBS Element field has appreared in Period Dependent Tab.
    But the issue is that its grayed-out & i am not able to fill-in any data in it.
    Can you please infrom me how can i activate WBS element in Asset Master ( Period Dependent Tab)
    Regards
    Ashwin

    hi,
    goto asset master screen layout and put tick mark under time dependent data.
    govind.

  • WBS element in Asset master & investment order

    hi,
    till now we are using the capital investment order for capitalising assets, but now the client is asking for settling wbs element on to auc, can we have both WBS elment and investment order for a single asset. does any one have img document for wbs element related config.

    Hi Sai,
    I think I can answer part of your question.  If a posting is being made to wbs element and internal order (both are real).  The real posting goes to wbs element and statistical posting goes to internal order.
    In this case, you will be settling the wbs element to the AUC rather than Internal Order.
    Coming to the configuration, most of the configuration settings are same on Internal Orders / WBS elements.
    I am sorry, I do not have any documentation.
    Regards,
    Sreeni

  • WBS Field in Asset Master Record

    Hi All,
    Currently we are working in 4.6 C version.
    The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent.
    The standard functionality is available in ECC6
    Could some body help us in knowing how to achieve this in 4.6c, do we the SAP standard Solution or do we need to go for some enhancements.
    Regards,
    Nitin

    Hi
    @ Satish - Seems you have copied the reply from one of my earlier posts which is related to a different issue
    @ Nitin: Go to Screen layouts (IMG > AA > Master data > Screen layout)
    Here, you need to allow WBS Element in your screen layout... Also, if you cant see WBS there, Allow to use WBS element in the IMG Step AA > Integration with GL > Define Additional account assignment objects...
    I never worked on 4.6, but I guess WBS must be allowed for usage
    br, Ajay M

  • Report: Statistical WBS elements with assets assigned to them - actual cost

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
    Assets assigned to each WBS
    Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    Hi
    There is not a standard report which can cater to your requirements. You need to develop one.
    You can take the refernece from CNS41 report for development. Some of the fields you need are PRPS-XSTAT for statistical WBS and will have to use tables ANLA and ANLC to fetch asset master data.
    Regards

  • Statistical WBS element posting - Asset

    Hi,
    From the SAP help on AS03 transcation field on Origin tab >Account Assignmnet for investment  - WBS element  , I see the following information.
    WBS element investment project
    Enter the WBS element here, if the system should automatically make statistical postings of the transactions on this asset to this WBS element.
    You can specify in the Customizing definition of the transaction types, whether statistical automatic posting should take place for certain transactions.
    But I am unable to find a setting in the transaction type which allows the statistical postings on the WBS element , when we are posting to the asset.
    We have a requirement to post statistical postings to WBS element when posting to the asset and we thought of using this funtionality but unable to find the setting which allows the statistical postings on the transaction type.
    If anyone knows how to make this setting , could you please share with me.
    Thanks
    Vara Prasad

    Hi Markus,
    Thanks for your response.
    Even with the OSS note I am unable to find how to change the asset accounting transaction types allowed for statistical postings to WBS elements.
    I am aware of other steps in the configuration except this setting, could you please let me know if you have any idea on this setting specifically.
    Regards
    Vara Prasad

  • Report:actual costs:statistical wbs elements and assets assigned to them

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
    Assets assigned to each WBS
    Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    Thanks for your reply but this is not the question.
    The question is:
    Example:
    I have 100 WBS Elements. Each of them has an average of 5 assets assigned. (what makes 500 assets)
    I post lot of invoices in each asset.
    I would like a report that tells me at once the total actual amount posted in each ASSET and group those costs by each WBS element.
    Thanks and regards,
    Miguel

  • WBS assignement in Asset Master & postings Impact on business processes??

    Hi all,
    We have the option in asset master record to give the WBS element, so whenever we procure an asset we will procure it to a project so we planned to give wbs in asset master record.
    we even calculate dep for the project. and we will transfer asset from one project to another.
    by considering above all if we assign wbs in asset and procure it to project and calculate dep. does it leads to any other implications. we tested the above cycle its working fine, but we are unable to vizualise other impacts.
    so somebody please guide us to goahead with this opttion.
    thanks & regards,
    shashi kanth.

    Hi,
    Typical use of this is to do a statistical posting to the WBS and a "real" posting to the asset.  It is a nice feature, as you can tell and report on your origins of assets by WBS. 
    Good luck!
    Tammy

  • WBS Assignment for Asset Error

    Dear Experts,
    In CJ03 transaction, checking the WBS data i found error in viewing of assigned asset.
    the Error Message showing "Data for asset view 0 is missing" in the tab of Asset under construction. i didnt understand and i checked the asset and found the asset is ok. kindly provide me a solution for this message.
    Thanks in advance,
    Raghav
    Edited by: Raghav K on Sep 12, 2008 8:34 AM

    Hi Satish,
    I am using the ECC6.0, so is this valid for my version?
    Thanks for the fastest reply also.
    Thanks and Regards,
    Raghav

  • How to find WBS element total asset value

    hello all,
    i have a requirement like this..
    i have displayed profit center wise PM orders  with total actual cost.....
    similarly i have another report where i need to display profit center wise WBS elements with total asset value....
    from which table do i need to take this total asset value ,how do i link this table with PRPS table...
    thanks in advance....

    hello all,
    i have a requirement like this..
    i have displayed profit center wise PM orders  with total actual cost.....
    similarly i have another report where i need to display profit center wise WBS elements with total asset value....
    from which table do i need to take this total asset value ,how do i link this table with PRPS table...
    thanks in advance....

  • Standard report to check Equipment-WBS-Material-Asset No

    Hi All,
    Is there a report to have a look equipment no, which is belong to WBS, material and Asset no.
    Normally i open using IE03. Any standard report to shows all part in 1 report ?
    Please advice.
    Thanks a lot.
    Nies

    ok

Maybe you are looking for

  • Camera Raw won't open in Photoshop CS6

    Wanting to begin using the Camera Raw plug-in for PS CS6, I find that it isn't active. (1) In Bridge CS6, the ACR icon in the top menu is grayed out; (2) after clicking a JPEG image file in Bridge, then right-clicking it, there's no option to open it

  • Download data from memory to Excel format.

    Hi Gurus,     How can I download data from Memory( not in application server ) to Excel format ? Now I am using below function modules  but not coming in proper format. CALL FUNCTION 'LIST_FROM_MEMORY'        TABLES             listobject = listobjec

  • Oracle 11g XE and SQL Developer

    Hello: Very new here.  I'm not sure where to post anything.  Apologies, but I'm all over the board. I've installed 11g and downloaded SQL Developer (not even sure if this needs to be "installed" as it's just a zip file). Anyway, at the SQL command li

  • Problems during Weblogic Shutdown

    Hi : I am using Weblogic 5.1 SP8 , I frequently get into the below problem and I dont know how to fix this Any help will be appreciated. the Actual Error Message that I get, when I give the shutdown command : Mon Feb 26 10:30:50 PST 2001:<I> <HTTP> D

  • How can i execute my swing project?

    i am new about java.. i am trying to do something with jbuilder.. but i can't have any exe file.. i want to know how the last users will use my programs.. do they have to write java commands?.. thanks..