WBS system status

Dear Experts,
We cannot perform settlement due to "Asset 2000 5010000125-0 is incomplete, check the asset".
What must we do so that we can proceed with the settlement?
Helpful answer will be rewarded. Thanks in advance.

You create a WBS >> An AuC is created as a result of configuration in the investment profile >> then you build an AuC by collecting costs at the WBS >> Then you settle these costs to the AuC, may be you create FA from the WBS screen itself and distribute settlement costs to the FA >> There would be no problems until the costs are collected by the WBSE and setteled to the AuC.
Problem lies in the Asset master data.
Since the AuC is created in the background, system does not ask for all the mandatory master data which would have been (required to be) maintained for the asset, by virtue of field status groups etc.
However, I would suggest you to please complete all the asset master data >> then carry out the settlement.
Hope this info was useful.
regards,
Pradyumna

Similar Messages

  • Report to check the WBS "system status"

    Hello friends,
    Would anyone know for a standard report where I can check for the WBS "system status"?
    i.e.: I want to know everything I have in AVAC status
    Thanks and Regards
    Alex

    You can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
    System will display you user / system status for all the PS Objects.
    With Regards
    Nitin P.

  • User Status and system status

    Hi PS Gurus,
    As per client requirement
    a)no finance posting
    b)no cost planning
    c) no budgeting
    only project ,wbs and network(no activity) should be created .
    These all transection should be carried out after releasing of particular WBS,Network (System status REL ).
    We have created user status profile in ok02 and assigned in project profile
    Data maintained in status profile
    St NO Status   StatusShort Text                   Lowest   Highest  Posit    Prior      Auth. cod    
    1    CRET  CREATED                                     1           2         1          1                 
    2    REL   STOP DATA UNLESS REL               2          2         1           1                 
    In status CRET  we have forbidden all business transection which client don't require.
    But when we are relasing the WBS (system status REL) ,user status is remain CRET .
    We want that after releasing WBS ,user staus should change to REL. which allows the all busness transections.
    Kindly help
    Regards
    Project Team 1

    Hi Experts,
    Actually, I have done as suggested over here like creating a NREL user status and it is working fine, but for my client, I had to ensure that the "Release" is allowed only after the  budget is released ( after CJ32). This is working till the time it gets the Sys. status "BUDG" and BUDG gets assigned immediately when we give the budget through CJ30. How to do this ?
    Also, I want this to get only assigned to the topmost WBS whereas as I had assigned this Status profile in the Proj. profile, it is getting assigned for all the WBS... how to overcome this problem ?
    thanks in advance,
    Vinodh.

  • System Status at WBS level

    Hi friends.
             I have an issue in my report, my requirement is I have to fetch all the WBS Elements which are having System status as TECO . But in the selection screen i have given date range. Now i have to fetch all the WBS  having TECO as system status with in this date range . I have used JEST table also for checking this status .I have used  prps table for wbs elements.
    when i give the date range i am not getting all the wbs with in tht range.
    how can i validate date in this case.
    Is there any table which gives system status based on date .
    i want table with system status and date.
    please have a look over this .

    Hi,
       Try the fm STATUS_TEXT_EDIT.
    Regards
    Kiran Sure

  • How to find out System Status of WBS Elements?

    Hi PS Experts!
    Please help me on my query.
    I want to get a list of WBS elements whose status is Released and can be used.
    If I try to search the table PRPS, it can only help me in finding WBS elements without deletion flag, with RA Key and so on.
    But the System status (such as Blocked for use) etc. is not present in the table.
    The one way I know is to get Object Number of WBS element from PRPS Table and insert it in JEST Table to get system status.
    Or alternatively, I give the WBS element no. in CJ20N t-code, and then check for System Status.
    These 2 methods work, if I do it one WBS Element at a time. If I need to get thousands of WBS elements in such a fashion, it's tedious.
    So could anyone help me on this issue?
    Thanks in advance,
    Vinitha.

    Hi Bala
    Yes, you have put it rather correctly.
    We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
    I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
    I hope it's clearer now.
    Vinitha.

  • How to find the Project and wbs Element System Status

    Hi all,
      How to find the Project and wbs Element System Status.
      We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
    Regards
    Raghavendra

    Hi,
    try table <b>jest</b> with key = prps-objnr
    Andreas

  • PS-Relationship between the system status in wbs elements and activities.

    Relationship between the system status in wbs elements and activities.
    We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
    The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
    Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
    Thanks in advance.

    Hi Bala
    Yes, you have put it rather correctly.
    We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
    I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
    I hope it's clearer now.
    Vinitha.

  • WBS Report Showing Change logs - ex: system status

    Hi,
    I would like to know if there is any report that would show the change log for AVAC for WBS Elements (i.e. change data of system status).  I tried running CN60 but it does not give any results.
    Thanks!
    Vivian

    Hi Sarang,
    Thanks for your reply.
    Would you know if there is any specific report for this instead of having to look up individually?
    Also, in order to view the change document for both Project Definition and WBS Element, I understand there is some config that need to be done. Could you confirm if below are complete / correct?
    - project profile - tick on change document (OPSA)
    - Project Definition and WBS Element status profile (user status profile) - set business transaction to allow "create change document"
    Thanks!
    Vivian

  • System status change of WBS element

    Hi everyone,
    We need to change system status of WBS element programmatically.
    So can anybody suggest me which function module can I use?
    Thanks & Regards,
    Anirban

    system stauts is set when some function is executed e.g.
    REL is set when WBS is set to REL - CJ20N edit->status-> release
    SETC ise set when settlement rule on WBS is creaed
    BUDG is set when you carry out budgeting via txn CJ30
    so it depends on what system status you want set, then execute the following business transaction manually or via program/ development.
    However for setting REL or TECO you might be able to use some function modules
    For WBS elements I would check out the following
    CNIF_STATUS_2054               Set/Read Status for BUS2054                                     
    BAPI_BUS2054_GET_STATUS        Read Status for BUS2054 (Work Breakdown Structure)              
    BAPI_BUS2054_SET_STATUS        Set/Reset Status for BUS2054 (Work Breakdown Structure)         
    CNIF_STATUS_2054_CANC_AALK                                                                     
    CNIF_STATUS_2054_CANC_CLSD                                                                     
    CNIF_STATUS_2054_CANC_DLFL                                                                     
    CNIF_STATUS_2054_CANC_LKD                                                                      
    CNIF_STATUS_2054_CANC_MDLK                                                                     
    CNIF_STATUS_2054_CANC_TECO                                                                     
    CNIF_STATUS_2054_CANC_USER                                                                     
    CNIF_STATUS_2054_SET_AALK                                                                      
    CNIF_STATUS_2054_SET_CLSD                                                                      
    CNIF_STATUS_2054_SET_DLFL                                                                      
    CNIF_STATUS_2054_SET_LKD                                                                       
    CNIF_STATUS_2054_SET_MDLK                                                                      
    CNIF_STATUS_2054_SET_REL                                                                       
    CNIF_STATUS_2054_SET_TECO                                                                      
    CNIF_STATUS_2054_SET_USER

  • WBS data distribution for IDOC-PI-JDBC with system status 'CRTD' not working.

    Hello Experts,
    I am busy with a project where the PS project creation and updates should be transfered to the external legacy system through IDOC-PI-JDBC scenario.
    I am using the BAPI_PROJECT_MAINTAIN for this process. This scenario is working fine with the projects system status released (REL).
    If the system status is Created (CRTD) then no idoc creation happening therefor no data distribution of work breakdown structure(WBS) to the legacy system.
    Can anybody give me some suggestion of make it happening.
    Thanks in advance.
    Regards,
    Antony.

    Hello all,
    I did it with the help of my abap developer.
    We implemented a BADI, and from the BADI we created the idoc.
    When the idoc is there the legacy system receive the data.
    Regards,
    Antony.

  • WBS Element System Status to REL-Release

    Hi,
    I am looking for a way to set the System Status to REL instead of CRTD- created as soon as the WBS element is created.
    Can any one please provide their valuable suggestion.
    Thanks for your help,
    Satish

    Hi Satish,
    Sorry to say that I am still unclear with the requirement.
    When you say that users want to post cost to the WBS element, is it a direct Cost entry against the WBS or is it through GI/Service Enrtry and acceptance?
    If it is through GI/Service Enrtry and acceptance, then no costs can be posted without the release of the WBS.
    Hope I have put my point clearly.
    regards
    Pratap.V

  • USEREXIT / BADI to get WBS elem system status before&after for WBS in CJ20N

    Hi friends,
    Please help me out to capture the WBS element system status after and before the changes  in CJ20N tcode, the status has to be posted to the P I system.
    Please let me know if any user exit exists for CJ20N.I am not able to find any in CMOD.
    I have tried using the BADI's WORKBREAKDOWN_UPDATE and
                                              PROJECTDEF_UPDATE  .
    but was not able to capture the changed system status .
    Is there any other way to capture the system status and post them to PI.
    Thanks and Regards,
    KC
    Edited by: Krishna Chaitanya  G on May 7, 2009 7:19 PM

    Hi Afzal,
    The User wants to get it posted to the PI system as soon as the system status of WBS element is changed.
    I am already done with RFC FM for this purpose which gets  the changed status of  all PROJECTS-WBS elements.
    Our team is facing some probs with connecting to PI through RFC.
    Getting  'SYSTEM_FAILURE' error, when executing the RFC with PI system's destination.Not able to trace out the probs, they have tested the connection with IDOC which was a success and able to post the PI.
    They want me to capture the data in USEREXIT/BADI and some how trigger the IDOC with back ground job scheduled.
    Thanks and Regards,
    Krishna Chaitanya G

  • How to delete WBS  if system status is REL

    How to delete WBS at 2nd level if system status is REL (no cost have been populated yet). What happened is that system is set to auto release when created.

    Hi,
    If there are no postings , or account assignment objects such as purchase order, production order etc, you can right click the WBSE and delete it. Also you can select the WBSE and use the 'delete' icon to delete the WBSE.
    Muraleedharan.R
    091 9880028904

  • To get system status of WBS Element in run time

    My requirement is to call a Z prorgam when the std transaction CJ20N is saved.
    The Z program should be called only when the system status is set as closed. I am using the BADI workbreakdown_update to call the Z program. Inside the BADI I need to check if the system status is closed or not. How can I capture the screen field value of System status ? Can any one help me?

    Hi,
            table TJ02 dont contain the updated record. this process should be triggered before saving. So I need to get the changed system status in screen. The table contains the status as Released but the screen field has the status as closed.I need to fetch the screen value.

  • Why not all fields dimmed or show in display mode after system status TECO and CLSD for Project

    Dear All,
    When Sets the system status TECO or even CLSD all fields for WBS Elements are not goes to Display mode. User can still edit them or change then.
    The fields are:
    1. WBS Element Description, technical name: PRPS-POST1
    2. Person responsible number, technical name: PRPS-VERNR
    Other Progress and Customer enhancement tab pages for WBS Element all fields there also editable in TECO and CLSD system status.
    The client do not want to set LOCK system status for master data option.
    Is there any enhancement or standard way of doing that?
    Regards
    Saqib Usman

    Dear Saqib,
    Its a standard behavior of the system. In CLSD status, transactional data like Procurement gets restricted along with WBSE no and its scheduling details. But it allows to you change like WBSE desc./Responsible person.
    Also go thru the below link for clarification of WBSE system status:
    http://help.sap.com/saphelp_470/helpdata/en/ee/41f82246ee11d189470000e829fbbd/content.htm
    For locking all master data, as above experts suggest, you should use MDLK/LKD.
    Regards
    Shishir

Maybe you are looking for

  • Does anybody have any solution for a non-functioning key on a macbook pro

    Product Name: Macbook Pro 13", 5,5, Mid 2009 OSX:  10.6.8 Description of problem:  The right arrow key will not work or function. Other details:  At startup, when a button either the Apple, Finder, File, etc are pressed the highlighter moves to the r

  • I would like to share my iTunes account with another user

    I would like to share my itunes account on the same Mac with a different user. I do not see the shared folder in itunes sidebar

  • Astrology Calendar Creative Freedom with blank Calendar Page

    I would like to supply my own Calendar Page Pictures as well as the Calendar Calculations using my own Astrology Program to Calculate a differnt Calendar for every time zone. This suggestion has got to be the next step for your Calendars! Able to pri

  • Best photo viewing option

    I have all my photos in iPhoto on my Macbook Pro and the photos are backed up to two external drives at different locations. However, I'm looking for the best option to store my photos so I can quickly pull them up and view them on my Phone and iPad

  • Open url with createTempFile fails

    I am deploying a Java application which needs to use a web browser-based application to draw some data and save the data as snapshots. It works fine on my localhost version, but in the deployment environment, it fails. The browser launches on the dep