Wc and splits

hi, confused regarding work center- capacity view- individual capacities and no of splits of routing? pls explain with one example how to use these 2 fields (individual capacities & no of splits) and how they are related, how it will effect the capacity.

Dear,
Individual capacities in work center we use for same capacity of machine. Suppose you have 5 lath machines for that we create one work center and define Individual capacities as 5
Number of splits in routing is use to use these Individual capacities suppose you say 3 then system will schedule the order on three Individual capacities instate of 5.
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

RA VPN on ASA and Split Tunneling

Hello Forum,
I'm having an issue with RA VPN and split tunneling. Our company doesn't allow split tunneling.
I have the following....
ASA 5520 - ASA Version - 8.0(3)
Group Policies defined for different groups. My test group, I thought I disabled split tunneling but they are still able to surf the net.
For Split Tunneling Policy...
Inherit is unchecked
I have "Tunnel Network List Below"
Testing_splitTunnelAcl is my acl. I have a bunch of host IPs in the list. I don't have any or 0.0.0.0 in the list.
But they can still surf the net.
I would like to block access to net. No hairpinning or internet u-turns.
How do I do this?
Any help greatly appreciated.
Regards,

What does your Testing_spliTunnelAcl have?
To disable split tunneling, your Testing_spliTunnelAcl should only have this...
access-list Testing_splitTunnelAcl standard permit any
...which means all traffic will be encrypted and will be sent to ASA no matter what. If you add any IP Address, only those traffic destined to the IP Address in the list will be encrypted and send to ASA, everything else will go to internet from the client.
It may be confusing but try and see what happens.

Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

Generally setting a common Album title and Album Artist will fix things.
For compilations that aren't, select all tracks, Get Info, and on the option tab set Part of a Compilation to No. If it already says No tick the box alongside, then click OK.
For deeper problems see Grouping tracks into albums.
tt2

Cross-tenant email and split domains - how to set up?

I've successfully deployed exchange 2010 sp1 in /hosted mode with multi-tenancy and the install is working great. We are running into a problem configuring the send connectors
for inter domain email and split domains. We have several customers wanting to only put a couple of email accounts on the exchange server and have the rest of their email accounts resolve to a pop server at an external location. Currently I have a internal
send connector set to relay email between the domains on the server so they can send emails to one another. Directions for this were found at: http://www.zerohoursleep.com/2010/10/step-by-step-starting-with-exchange-2010-sp1-multi-tenant-sending-and-receiving-emails/
I created the connector: new-SendConnector -Name 'TestOrg' -Usage 'Internal' -AddressSpaces 'SMTP:domain1.com;1','SMTP:domain2.com;1' -IsScopedConnector $false -DNSRoutingEnabled $false -SmartHosts '[127.0.0.1]' -SmartHostAuthMechanism 'None' -UseExternalDNSServersEnabled
$false -SourceTransportServers 'Exchange'
I added all my internal domains to the connector listed above and email is able to flow from one domain to another.
My problem is we have a number of customers who need split-domains set up where users who arent on the exchange server are relayed to an external server. Example to route unknown users on a domain to google my send connector looks as is:
New-SendConnector -Name "Internal Relay - domain1.com" -Custom -AddressSpaces "SMTP:domain1.com;5" -SmartHosts aspmx.l.google.com -SourceTransportServers "server"
This results in an internal loop error when sending from one internal domain to another. Sending from an external domain everything is fine. If I remove the "internal" connector listed above the split-domain send connector works perfectly fine delivering locally
and to the external server.
How can I make it so both send connectors work?

Hello,
did you solve the problem and how?
Thanks,
Victor
Exchange and Outlook utilities at
http://www.ivasoft.com

Use Message Mapping to repeat top node and split Message

I am currently using XSLT Messaging to do majority of the mapping. I have two issues that remain, I need to repeat the top node for each or its child elements and split the message.
<Sensor xmlns="namespace">
<Observation>
    <XML>Some Data</XML>
</Observation
</Sensor>
1. Can it be done in XSLT? I posted a thread asking for help on this. Where I would need to repeat the Sensor tag for each observation. If this is possible then I will able to split the messages at the HTTP adapter used for the target system.
2. Can Message Mapping be used. Using the same xsd on both source and target systems, Will sensor repeat if set to 1:n and observation set to 1:1. In source it is Sensor 1:1, Observation 1:n. If this works then I can use a BPM to shoot out individual messages using a for each.
Any help is greatly appreciated. I am fairly new to XI as this is my first major project. Thanks

Source File                                             Target File
> XI (XSLT) -
> Each observation as one file ---> Out via HTTP
Batch of all orders
Source File
<?xml version="1.0" encoding="ISO-8859-1"?>
<receipt>
<manufacturer>Manufacture Name</manufacturer>
<manufacturer_gln>999999</manufacturer_gln>
<transfer_recipt>0123456</transfer_recipt>
<prod>
    <product_GTIN>99999999999999</product_GTIN >
    <product_LOT>123456A</product_LOT >
    <production_date>20090131</production_date>
    <expire_date>20120131</expire_date>
    <carrier>
      <carrier_type>P</carrier_type>
      <carrier_barcode>001</carrier_barcode>
      <carrier_detail>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>01</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089211</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089212</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089213</carrier_barcode></carrier>
            </carrier_detail>
        </carrier>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>02</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089214</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089215</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089216</carrier_barcode></carrier>
            </carrier_detail>
        </carrier>
      </carrier_detail>
    </carrier>
    <carrier>
      <carrier_type>P</carrier_type>
      <carrier_barcode>002</carrier_barcode>
      <carrier_detail>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>03</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089217</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089218</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089219</carrier_barcode></carrier>
          </carrier_detail>
        </carrier>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>04</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089220</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089221</carrier_barcode></carrier>
           </carrier_detail>
        </carrier>
      </carrier_detail>
    </carrier>
</prod>
</receipt>
Target File
<?xml version="1.0" encoding="UTF-8"?>
<pmlcore:Sensor xmlns:pmlcore="urn:autoid:specification:interchange:PMLCore:xml:schema:1" xmlns:pmluid="urn:autoid:specification:universal:Identifier:xml:schema:1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:autoid:specification:interchange:PMLCore:xml:schema:1 cases.xsd">
<pmluid:ID>GPO_AI_LU_DC</pmluid:ID>
<pmlcore:Observation>
    <pmlcore:DateTime>2008-10-13T17:53:00.265+02:00</pmlcore:DateTime>
    <pmlcore:Command>PACK</pmlcore:Command>
    <pmlcore:Tag>
      <pmluid:ID>01</pmluid:ID>
      <pmlcore:Data>
        <pmlcore:XML>
          <Memory>
            <DataField fieldName="EXPIRATION_DATE">20120131</DataField>
            <DataField fieldName="BATCH_ID">123456A</DataField>
            <DataField fieldName="ZMFG_DATE">20090131</DataField>
            <DataField fieldName="ZMFG_GLN">999999</DataField>
            <DataField fieldName="ZMANUFACTURER">Manufacture Name</DataField>
            <DataField fieldName="ZITEM_COUNT">16</DataField>
            <DataField fieldName="ZWORK_ORDER_NUMBER">0123456</DataField>
          </Memory>
        </pmlcore:XML>
      </pmlcore:Data>
    </pmlcore:Tag>
    <pmlcore:Tag>
      <pmluid:ID>0108699547010089211</pmluid:ID>
      <pmlcore:Data>
        <pmlcore:XML>
          <Memory>
            <DataField fieldName="EXPIRATION_DATE">20120131</DataField>
            <DataField fieldName="BATCH_ID">123456A</DataField>
            <DataField fieldName="ZMFG_DATE">20090131</DataField>
            <DataField fieldName="ZMFG_GLN">999999</DataField>
            <DataField fieldName="ZMANUFACTURER">Manufacture Name</DataField>
            <DataField fieldName="ZWORK_ORDER_NUMBER">0123456</DataField>
          </Memory>
        </pmlcore:XML>
      </pmlcore:Data>
    </pmlcore:Tag>
     </pmlcore:Observation>
     </pmlcore:Sensor>
I have the XSLT Mapping working to transform data from Source file to target File. But my target file has multiple Observations that need to be split into the Sensor, Observation structure.

I get the following message when i try to open ALL my documents : frozen panes and split panes are not supported and were removed. my documents are blank

i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!

Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian

Remove Batch Management and Split Valuation Dependencies

Hi,
I need to remove Batch Management Indicator and Split Valuation for a material. Which one should I do first? Are these dependent on one another?
Thanks,
Jograd

You are correct. It did cause lots of error when i tried to do it in test client.
I am trying to remove the valuation category of one right now. It has zero stock and no open documents.
I saw in note Note 155874 - Change valuation category in material master that you need to do this:
2. If you change from split to joint valuation, no valuation data must
exist for a valuation type.
I dont know where to start doing that? Because there is not data for the material. However i noticed that there is valuation for previous period. do i need to delete that too? But there are no stocks for the previous period.
Please help.
Thanks,
Jograd

Batch and split valuation simultaneously

hello all,
we have scenarios in which both batch management and split valuation is active.
we are currently uses STO with stocktransport order by using 351 and 101 movements.
my question is that
why the sap system does not allow plant to plant stock transfer by using 303 and 305 movement type when both batch management and split valuation is active?
is this is a sap standard best practice?
pls explain in detail.
regards
sumit simran

HI,
try following sap note
66953 Stock transport order for split-valuated material
801097 Stock transport order with split valuation
Regards
Kailas Ugale

I have an idea for an iPhone app that I believe would be marketable. However, I have no talent towards writing software. How does I find a reputable programer that would be will to develop and split proceeds?

I have an idea for an iPhone app that I believe would be marketable. However, I have no talent towards writing software. How does I find a reputable programer that would be will to develop and split proceeds?

Find an app you like. Contact the developer of that app and see if they are interested.

Read a excel file and split its sheets to seperate file ?

Dear all :
How to split a excel file into several file, each have one sheet.my code is as below,thanks:
import org.apache.poi.hssf.usermodel.*;
import java.io.*;
import java.util.*;
import org.apache.poi.poifs.filesystem.*;
public class Extractxls {
public static void main(String[] args) throws Exception
try {
POIFSFileSystem fs = new POIFSFileSystem(new FileInputStream(args[0]));
HSSFWorkbook wb = new HSSFWorkbook(fs);
int sheetCount = wb.getNumberOfSheets();
System.out.println(sheetCount);
try {
     while(sheetCount > 0) {
     sheetCount--;
     HSSFWorkbook wb1 = new HSSFWorkbook();
     HSSFSheet s = wb1.createSheet();
     String sheetName = wb.getSheetName(sheetCount);
     HSSFSheet sheet = wb.getSheet(sheetName);
//     HSSFSheet sheet = wb.getSheetAt(sheetCount);
     System.out.println(sheet.toString());
     s = sheet;
FileOutputStream fileOut = new FileOutputStream("atest" + sheetCount + ".xls");
wb.write(fileOut);
fileOut.close();
} catch (Exception e) {
     System.err.println("Error: " + e.getMessage());
} catch (Exception e) { e.toString();}

The HSSFWorkbook class is part of the POI project:
http://jakarta.apache.org/poi/
Regards,
Dave Gilbert
JFreeChart Project Leader
I understand poi porject, my problem is that POI can not read a excel file and split its sheets into seperate file (each have one sheet) ?Does any one know how to do it.

Reading and Splitting

I have 5 classes:
Fruit
Apple, Melon and gooseberry extends Fruit and has few additional attributes of their own
FruitExpert is the main class
I have to read from a file which is record based according to the first line. For Eg:
APPLE
CRISPIN
YELLOWISH-GREEN
3
10
4
4
11
2
GOOSEBERRY
BLACK VELVET
DARK RED
6
7
2
1
So I will read the file and split it based on records like Apple and the following values will be stored in the apple attributes. Similarly, goosberry.
After reading the file, how do I split it into records?

Smells like homework to me :-)
The easy way would be to read the line by line, into a String.
Presumably the first line tells you what sort of object you need to create (Apple, Melon, GooseBerry)
Two approaches here
1 - with if statements . If Apple, if Melon...
2 - with polymorphism. Instantiate an object of that type, and call a method like fruit.readAttributesFromFile() That method will then read as many lines as it needs to from the file to populate its attributes (presumably the apple would read and process the next 8 lines, and then leave the status ready to read the next line - to tell you what sort of fruit is next in the file.

Remove context and split by value.

Hi Friends,
                        the SAP Library seems to bge a bit tough for me. Any url where I can find easy definition to Remove context and split by value , with exampl!!
Thanks in advance!!
Arnab .

Hi,
Remove Context Simply remove the Context. SplitByValue inserts Context.
Case 1: Remove Context is not Used.
Source Message:
<Test_Out_Remove>
<header name=u201CA">
<item>A.one</item>
<item>A.two</item>
<item>A.three</item>
</header>
<header name="B">
<item>B.one</item>
<item>B.two</item>
</header>
</Test_Out_Remove>
TargetMessage:
<Test_In_Remove>
<item>A.one</item>
<item>A.two</item>
<item>A.three</item>
</Test_In_Remove>
Case 2: Using Remove Context.
Source Message:
<Test_Out_Remove>
<header name=u201CA">
<item>A.one</item>
<item>A.two</item>
<item>A.three</item>
</header>
<header name="B">
<item>B.one</item>
<item>B.two</item>
</header>
</Test_Out_Remove>
TargetMessage:
<Test_In_Remove>
<item>A.one</item>
<item>A.two</item>
<item>A.three</item>
<item>B.one</item>
<item>B.two</item>
</Test_In_Remove>
Case 3: Without SplitByValue
Source Message :
<Test_Out_Split>
<header>
<item>one</item>
<item>two</item>
<item>three</item>
<item>four</item>
</header>
</Test_Out_Split>
Target Message :
<Test_In_Split>
<new_context>
<item>one</item>
<item>two</item>
<item>three</item>
<item>four</item>
</new_context>
<new_context />
<new_context />
<new_context />
</Test_In_Split>
Case4: Using SplitBYValue
Source Message :
<Test_Out_Split>
<header>
<item>one</item>
<item>two</item>
<item>three</item>
<item>four</item>
</header>
</Test_Out_Split>
Target Message :
<Test_In_Split>
<new_context>
<item>one</item>
</new_context>
<new_context>
<item>two</item>
</new_context>
<new_context>
<item>three</item>
</new_context>
<new_context>
<item>four</item>
</new_context>
</Test_In_Split>
Reward points if needful.
Thanks,
RamuV

JVider and splitting code

I am using a program called JVider, if anyone else out there is, I think they will be the most help.
I was using the program just fine. BTW, it builds GUIs from a GUI. I like it, it takes some of the tedious work out for me, also I am not experienced enough to do it all by hand.
Anyways, I ran in to a huge problem, 65kb limit of class files. So I am trying to split it up without having to hand code alot of stuff. I am not finished with the GUI yet, that's why I don't want to have to hand code alot of things. I want to test every now and then and build the program up, but if JVider and splitting up the GUI is too dificult I don't know what I am giong to do.
One problem is that JVider exports each file as a extends JFrame type of .java file.
What I have gotten to work so far is splitting it up and making the second file do a couple things; 1) Take the JPane that I will add these items to as an argument, 2) add the second file's contents to that JPane.
The problem I am running in to is that the "imported" components are inside the JPane I have in the second file just fine, but the pane is not maximized in the first file's pane. If this is confusing, I can provide a screen shot. I would put the code here, but it is quite a bit. And I don't know exactly what I should put up as far as relevence is concerned.

Through a little bit of experimenting, I think it's a question of how to make one JPanel inflate it's site to the remaining space of an outer Jpanel

Two effects - Reverse and split picture?

I was wondering if anyone could explain to me how to do both or either of these effects. For all I know they may be simple to do, however I cannot figure it out.
1. Reverse - How do you take a video and reverse it. Ex: A car driving forward and then switch to it going backwards the way it came.
2. Split picture/video - How do you take a video and split it vertically into say 4 or 5 different segments? For this, I need to be able to show only 1 segment at a time and also all of them at once, so a little black line between each segment would be great if anyone could help with these.
Thanks in advance!

1. Highlight the clip, right-click on it and select SPEED. When the Speed window opens, check the reverse box.
2. The easiest way is to create a matte in Photoshop in the configuration you need then layer the matte over the clip.
-DH

No 'Viewer' view in fullscreen only Browser and Split

I'm not sure if I am doing something stupid here. I installed the 3.1 update and launched Aperture and I have lost the full screen 'Viewer' view. Pressing V toggles between Browser and Split view. All three views are selectable in the non full screen view.
I'm following the Aperture 3 Pro training series book, so it's possible that I have changed something but I'm pretty sure it was fine before the 3.1 update.
Any ideas?
Thanks,
Gareth.

Is the 'always show filmstrip' slider (on the right edge of the filmstrip between the last image and the right margin) in the down or 'on' position?

Aperture stopped showing pictures in viewer and split view

Suddenly Aperture 3 has stopped showing any pictures in viewer and split view (except for the bottom fim strip) but I can see them all in browser view. I have tried using Aperture Repair and have reset Aperture (using Clean My Mac to delete the user setup files). I also tried creating a new library with just a few files to see if the size of the library was an issue. I also tried opening the libraries in iPhoto and have the same result. I can browse the minatures but not open the larger pictures.
The only thing I have yet to try is to delete and reinstall Aperture. But since iPhoto has the same problem, I don't see how that would be the issue.
Aperture is version 3.5.1, OS is OSX 10.9.2.

I would have to redo the cleanmymac step but essentially it is like creating a new install before using the app.
If you do not know, what exactly will be uninstalled, by a general cleaning application, don't use it. That is risky.
Using a different user account makes no difference.
That means, you are having a system wide problem. Fixing your Aperture library or settings in your account will probably not help.
First thing to try, reinstall Aperture.
And if that does not bring your split view back, reinstall Mavericks. You may have missing caches and necessary configuration files, since iPhoto is having the same problem.
Did you run CleanMyMac to uninstall other applications, before the problem first occured? Usually it is much safer, to use only the uninstaller, that come with an application. Otherwise, you are risking to uninstall items needed by other applications or the system.
To reinstall MacOS X 10.9.2, boot into OS X Recovery, see this document: http://support.apple.com/kb/HT4718

Wc and splits

Similar Messages

Maybe you are looking for