WC Out of the Box Features

I need the list of out of the box features provided by Webcenter. I'll be very grateful if anyone provides this list (any link). I know wiki and discussions are available, but what others are also available.
Thanks and regards
SoftDesire

Hi Desire,
The Product Overview page on OTN contains all the information you're looking for.
Let me know if you have questions.
Peter

Similar Messages

Best Practices in SharePoint 2010 ( Out of the box feature vs Custom Web Part, development )

Hi
How do we differentiate on when to allow custom web parts and when to use out of the box.
What are the performance issues involved when we deploy a custom web part into the SharePoint server.
Why do some companies prefer to allow only out of the box features, and no custom work is done?

SharePoint is a powerful, flexible server product that can provide a wealth collaboration environment right out of box.
Best answer for your question is depend upon your requirement. Sometime Out of Box features will solve all the problem with little designing. But sometime your requirement need a Custom Web part / solution.
With OOTB implementation the big advantage is easy to trouble shoot & fix the issues. You will also found tons of blogs on internet for OOTB features. In custom development, its hard to troubleshoot & identifying whether its SharePoint issue or Custom
code issue.
check the below article for more ideas.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1e7845ef-61e0-4d01-bb6c-92519e6d7139/sharepoint-2010-outofbox-best-practices?forum=sharepointgeneralprevious
http://www.cdh.com/media/articles/Pages/SharePoint-out-of-the-box---To-customize-or-not-to-customize.aspx
Master List of SharePoint 2010 On-Premises Custom Development Best Practices
http://i.zdnet.com/whitepapers/Quest_WPW_SharepointDev_Custom_US_KS_v3.pdf
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Out of the box behavior of the Pagination control

Why does the Pagination invoke the PageFactory callback upon page count change? And when it does invoke it, why is it with currentPageIndex=0? Should there be an API to remove this listener if this is undesirable behavior? If we know we may need to alter the Page Count after construction of the Pagination control, would it be best to remove the old one, and construct a new one for display at that point since the current implementation seems to behave inconsistently when one wants to alter the Page Count post-construction and/or callback configuration.
Please consider the following scenario:
The user is viewing a TableView of items. Below the TableView is a Paginator whose PageFactory callback fetches rows from a database and calls TableView.setItems(<results>). There are 3 pages and the user is on the 3rd page. Only 5 rows remain out of a possible page size of 20. The user decides to delete the 5 remaining rows on page 3 from the table/database. Now it would seem natural at this point to conclude that page 3 no longer exists and we would want to the user to return to page 2. If we simply call paginator.setCurrentPageIndex(currentIndex - 1) then we will correctly transition the user to Page 2, however Page 3 will remain displayed in the Pagination control and if the user browses back to that page, he is met with the "There is no content to display" label. So it would seem natural that we could presume this happening and instead call paginator.setPageCount(2), then paginator.setCurrentPageIndex(currentIndex - 1). That way the Pagination control reflects an accurate number of pages. Unfortunately, this results in TWO callbacks to the PageFactory method, one at currentPageIndex=0 and another at the correct index. Sometimes the widget that is constructed in the PageFactory callback (TableView) doesn't get displayed properly (disclaimer: speculation ahead) probably due to some asynchronous nature of the two competing callbacks (?).
I'm struggling to get a handle on this control. So far, my experience with TableView has been pretty good. I love the features you get with this Pagination control out of the box, but some of the choices that were made with regards with what APIs to expose confuse me. The frustrating thing about callbacks is that sometimes you can get caught in this callback hell where there are all sorts of callbacks being invoked and you don't really know why. Often times, the Javadoc does not indicate that there is a default listener being applied to certain property that may invoke one of these callback. I don't mean to sound like a rant. Overall my experience with JavaFX 8 has been very positive so far. I can usually always find a workaround if a come across a weird issue with an out of the box control. Worst comes to worst, I'll write my own Pagination control.
Thanks for your time.

For anyone else that may come across this post. I was able to find a workaround by simply using a field, boolean pageCountReset, and then bounding all of the logic in my page factory call back with a condition checking for this boolean value i.e. if (!pageCountReset) // continue, else // noop. Then, if I need to reset the page count, I set my boolean to true so that the page factory callback results in a noop. Because the pagination control under the hood will make currentPageIndex=0 (as I talked about above) if the page count is reset, I then have to be very explicit and either call my page factory callback manually to refresh the current page if it still valid, or I call pagination.setCurrentPageIndex(<new index>) so that the page factory callback will be invoked and pageCountReset will be false at this point, so I can successfully transition pages.

Out of the box porlets for Content Management with BEA Portal

I am looking at BEA Portal for a simple Intranet site with some basic content management system capabilities. I would like to implement this without the use of a third party tool and wanted to know if there are any open source or out of the box BEA portlets/web-apps with basic CMS capabilities beyond what has been shown in the Portal tutorials around CMS. From doing the tutorials, I have learned how to manage content, and how to build a site from scratch to access the content using the <cm:> tags. However, without additional third party products such as Documentum or Interwoven, is there any free BEA/open source portlets to:
- Configure exposure of this content in a runtime framework? (ie content manager can expose new content from the repository by a configurable admin GUI, place where this content is on the page)
- Allow for a simple approval workflow where content that gets added to the repository by user A has to be approved by user B before automatically exposing?
Interested to know if custom portal type development is the only way to do these kind of simple functions, or third party product.

Hi,
Did you have a chance to look into WebLogic Portal 8.1 SP3? Check out the new Library Services features, which includes versioning and simple approval:
http://e-docs.bea.com/wlp/docs81/adminportal/help/CM_MAN_LifecycleOV.html
We also provide a few ootb portlets that allow users to interact with the CM system. Let us know if you have additional questions.
Best Regards,
--alex

Nokia Lumia 1520 out-of-the-box problem

I just got the Nokia Lumia 1520 from Germany and I took it out of the box all good and pretty, but when then I go and charge it since it didn't turn on at first (I have this british charger and a european adapter) and put it in the phone. I left it for a while to charge since the windows start button started flashing and now when I turn it on, it shows the Nokia start screen, then it shows that it's charging and then there comes a blue screen that flashes and it vibrates after that. Again the Nokia start screen shows and the blue screen flashes again, vibrates and Nokia screen again and so it goes endlessly!
I have never gotten it to start it just flashes the blue screen and turns off again
See the video:
https://www.youtube.com/watch?v=b4eOmqirqRk&feature=youtu.be
WHAT DO I DO HELP!

Sounds to me like the charger you are using is not powerful enough. Are you using the charger that came with the phone? You mentioned adaptors etc so thought you may be charging with another charger. You could also try charging with high output usb chargers, typically ones for tablets.

Out of the box workflow failed on start when started programatically

I have an approval workflow (out of the box) associated with a list and need to start it for some items programmatically when some conditions are met.
My application runs under an account which is a farm admin. I do have another user dedicated to start workflows. I'm using the code below but it always results in a 'failed on start' with these errors
2/27/2015 4:54 PM
Workflow Cancelled
System
Account
Workflow 'WorkflowName' was canceled by System Account.
2/27/2015 4:54 PM
Error
System
Account
'WorkflowName' failed to start.
Code is :
SPUserToken userToken = null;
using (SPSite site = new SPSite("SiteName"))
using (SPWeb web = site.OpenWeb())
site.AllowUnsafeUpdates = true;
web.AllowUnsafeUpdates = true;
userToken = web.AllUsers["WorkflowAccount"].UserToken;
site.AllowUnsafeUpdates = false;
web.AllowUnsafeUpdates = false;
using (SPSite site = new SPSite("SiteName", userToken))
using (SPWeb web = site.OpenWeb())
site.AllowUnsafeUpdates = true;
web.AllowUnsafeUpdates = true;
SPWorkflowManager workflowManager = web.Site.WorkflowManager;
SPList list = web.Lists["LibName"];
SPListItem item = list.Items[1];
SPWorkflowAssociationCollection associationCollection = list.WorkflowAssociations;
foreach (SPWorkflowAssociation association in associationCollection)
if (association.Name == "WorkflowName")
association.AutoStartChange = true;
association.AutoStartCreate = false;
association.AssociationData = string.Empty;
site.WorkflowManager.StartWorkflow(item, association, association.AssociationData);
break;
site.AllowUnsafeUpdates = false;
web.AllowUnsafeUpdates = false;
Is there any requirement on who can create the workflow? I can control who creates if I absolutely have to
Any help/clues/directions appreciated.

Hi LNFei,
To troubleshooting the issue, I recommend to follow the steps as below:
1.Start the workflow manually to check whether it works.
2.Use another account not System Account to check whether it works.
3.Publish the workflow as a different user (rather than System Account).
4.Deactivate and Reactive the “Workflow” Feature.
5.Check other workflows on other lists/libraries could work well.
6.Create a simple workflow having only one activity which will log history only, check if it works well.
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

S430 - touchpad not working at all out of the box

Hi all
I know there's a few people who have problems with the touchpad on their thinkpads, I've got another, different problem!
I got mine out of the box yesterday and neither the touchpad nor the red joystick controller in the keyboard work. The buttons on the touchpad also don't work.
Luckily I had a USB mouse at home and I've been able to the laptop up and running, but no luck trying to get the touchpad working. I've gone through the user guide, the help guide, the lenovo website etc, but not finding anything.
When I go into the "control panel", then "hardware and sound" and select "device manager", the only "mice and other pointing devices" that I have is my HID-compliant mouse which seems to be the USB mouse. The touchpad doesn't feature at all.
If I go into "control panel" and select "mouse" I don't actually have a tab for "UltraNav". Since all the help out there tells me to go to that tab, I don't really know what to do!
If I go through the Lenovo Solution Center, it tells me that the "ThinkPad UltraNav Pointing Device" is disabled and to fix it I need to go to the Device Manager.
But, as already said, in the device manager there's nothing I can do!
Any help would be much appreciated.
cheers
Harry

Hi
This notebook seems to belong to the PSAF5E series.
I wonder where you have found the drivers for this series ?:|
However, I have checked the Toshiba European page and didnt find the Vista touchpad driver especially for this series.
BUT the page provides some touchpad drivers (two drivers) for the Equium A200 PSAEE.
I would recommend installing the Alps Electric Touch Pad driver v7.0.301.4 and the Synaptics Touch Pad driver v. 9.1.14.0.
By the way; its always recommended to reinstall the OS with the Toshiba recovery CD. If you dont have such CD you could order it from the ASP which is responsible for you country.

What are the possibilities and limitation of using Out of the box content search webpart on SharePoint Online 2013/O365 ?

Hi All,
We are migrating from on-premise SharPoint 2010 to SharePoint online 2013.
I have few questions below:
What are the possibilities and limitations of using Out of the box content search webpart?
Also, how the cross site publishing will work in SharePoint online something with managed navigations and product catalog apporach? if it is not supported, then what are the alternatives to acheive the same?
Appriciate any commnets/clarifications.Thanks in advance.
Thanks,
Dhananjay.

Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered

UserName/Password to enter CSF GUI out of the box

I am trying to login to the CSF GUI provided out of the box with CSF framework.
http://localhost:18001/CSFAleConfig/SFE?
http://localhost:18001/wlm
But I dont know the username/pwd to get in there. I have tried everything Administrator/STC, any user/pwd combination inside edesigner User Management module. But none of the user/pwd working. Does anyone know how to get in these admin modules for CSF?
PS: I dont want to use Oracle directly to change the values of these config.

The replacement arrived on the 22nd which perfectly acceptable since they had to rebuild it all the way back in China.
So far so good I guess since most of the key features work. I did run into some problems before and after update the drivers using the pre-installed Lenovo software; I can't remember the name right now.
Firstly I noticed that my x230 was overheating a bit when I first ran it. The fan wasn't loud, but the air being pumped out was pretty hot, was causing discomfort whenever I had my left hand on the side or when touching the bottom. The good thing was it was not noticeable while the keyboard.
After letting the software do its thing, the excessive heat that was coming from the machine was gone, but new problems came up. Something must have gone wrong during the installation, because the ultranav stopped working. I had to roll back the drivers to get it working again. I also noticed that the webcam doesn't work; all I get is a black screen when run the web cam app in Metro. Since I didn't try running it before updating the drivers, I am not sure if it even works to begin with. The yellow USB 2.0 port also doesn't seem to work at all. I remember disabling it in the Lenovo Settings app in metro to save power, but I think that only disables the always on feature. The USB 3.0 ports seem to work after I plugged in a thumb drive. It is weird that it installed something first after plugging it in.
I have not fully played around with my x230 yet, so there might be other things that I may need to trouble shoot. I plan to do a clean install and install the drivers one by one was needed, so hopefully that will solve my problems. Overall my experience with the x230 has had a rocky start. I really want to like my x230 and I am hopeful that I will eventually resolve all my issues with.

Is the latest update to the 6th gen nano a software download or does it come with the new watch faces and larger icons out of the box

Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
Thx

It should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
B-rock

Help Please - on a VC that works out of the box with MAC before I sellup

I have to declare that I’m somewhat frustrated at the moment and I could do with some good advise please bare with me while I explain.
I have recently converted from all types of PC systems and MS OS to Apple. The conversion was based on a few drivers.
1, My wife finally has decided to “learn” how to do her own web work instead of asking me to look up this or that for her. So as she was starting from scratch I thought MAC.
2, At the same time I had a play with Vista at work and disliked it. I was using XP & W2K at the time.
3, I wanted to update my home hardware, which was 3 years old.
4, The accountant said I hadn’t spent enough on IT last year.
5, New project work in the planning that required video/audio work to upload onto the web and everyone said MAC was the best.
So having looked around and done what I thought was enough research I started investing. To date I’ve invested £4500 plus.
Started by buying
iMAC 24” 2.8 Gz Intel with 4GB ram (for the home office)
MacBook Pro 2.4 with 4GB ram (for out and about working)
iPHONE 16GB (which is great)
VMware Fusion was installed for those things that I couldn’t live without until I found a suitable replacement like MS Money, Paint Shop Pro, MS Office etc. Installed XP.
Tried Open Office found it to clunky and hard work working off files for MS Office that others sent/required. Ended up buying Office 2008 only to find VB macros don’t work in Excel and all my company spreadsheets still need PC MS Excel to run so back into XP via Fusion.
Then to MAIL which is great on the iPHONE as I can easily monitor my 5 email accounts, what a result. But now I come to attach JPG files as I would in outlook and they open into the content of text in the mail and will not stay closed but disrupt the message. Wholly unacceptable to my way of working with no cure.
Scanning next, so I down loaded GIMP to replace PSP which I find useless so back to PSP I go again via XP & Fusion.
Next and finally the VC project, Now please bare in mind that all I want to do is shoot film, upload it to edit it and then mount it on the web page. I have no desire to become any form of expert in the field just get the job done.
So reviewed iMovie to understand the spec. Realise it has limitation and reviewed FCE which seems to plug the gaps and boarders on being more professional.
At this point I must say I’m not totally new to this subject as I have used Studio8 and a JVC GR-DVL166EK video cam a couple of years ago and got on ok without any issues simple plug and play with great results.
Having reviewed the standards that the software is reported to work too without any publicly declared exclusions or exceptions by Apple I went shopping for the VC. (I didn’t know of the forum at the time and to the best of my knowledge Apple don’t advise of its existence in any product information on anything I have bought.)
I buy a Panasonic HDC-HS9 for £700 which doesn’t flaming work despite the fact that it should based on all the standards quoted by both manufactures and there are no disclaimers from either party that it won’t work.
I have reviewed the compatibility list on the support page (now I know its there) and find that the Panasonic HDC-SD5 does work. I reviewed the comprehensive detailed model spec on the Panasonic web site and there is no differences between the to models at all accept the HDD.
So why don’t it work?
*At the end of the day can anyone please recommend a VC that will produce high quality results without the need of a 3rd party software to connect and upload files convert and muck about instead of getting on with the job.*
And if all the publicised specs don’t allow you to conclude compatibility how can you protect your investment? Where do we legally stand and where is the accountability to the consumer.
<edited by host>
I am that fed up with the last 3 months of mucking about Bill Gat*es may just get me back.
Thanking anyone in anticipation for some meaning advise and help.
Regards
Alan

Hi, and thanks for you interest. The problems is that whether I'm using iMovie or FCE I get to a stage where the thumbnail image is present but if you try to play, import or any other action in either app it closes down and a message comes up " The Application Final Cut Express/iMovie quit unexpectedly - Mac OS X and other application are not affected" then asks if I wish to relaunch. I then hit the report to Apple button and afterwards relaunch. I was recommended to use Voltaic which I have tried, it worked but is to much mucking about for something that should work out of the box.
This problem happens on both the iMAC and the MacBook so quite sure it's not a OS software issue. All software update are up to date also.
Any ideas?

Not able to start out of the box approval workflow programmatically

We have a requirement to start an out of the box workflow from a .NET web service.
We are using the StartWorfklow method:
wfManager.StartWorkflow(item, association, association.AssociationData
we are getting the below error message at the above line of code: Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal
Then, we tried:
SPSecurity.RunWithElevatedPrivileges(delegate()
        wfManager.StartWorkflow(item, association, association.AssociationData,
SPWorkflowRunOptions.Synchronous);
Now, the workflow got canceled automatically with "Failed on Start" status. In the "Workflow History", it is showing 2 records with "was canceled by System Account." & "failed to start" in the description
column.
Please advise.

Hi Zhengyu,
1. I've already done that:
a) when "SPSecurity.RunWithElevatedPrivileges(delegate()"
is used, there are no errors showing up and code gets executed. However, the workflow failed to start.
b) When I don't use elevated privileges, the code is showing an error (Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal) when
it tries to start the workflow (StartWorkflow method).
2. The workflow starts with no issues through UI. I tried it using "System Account" and another account.
3. I tried also "Collect Feedback" workflow template. Same results...
You can find the code below:
public
stringStartItemWorkflow(stringsitePath,
stringlibraryName,
stringfileName)
stringreturnVal =
String.Empty;
stringwfName =
"VPApprovalWF";
SPUserTokentoken = GetSecurityToken(sitePath);
try
using(Microsoft.SharePoint.SPSiteportalSite
= newMicrosoft.SharePoint.SPSite(sitePath,
token))
using(SPWebportalWeb
= portalSite.OpenWeb())
                    portalWeb.AllowUnsafeUpdates =
true;
SPListlist = portalWeb.Lists[libraryName];
SPQueryfileQuery =
newSPQuery();
                    fileQuery.Query =
String.Format("<Where><Contains><FieldRef
Name='FileLeafRef' /><Value Type=\"User\">{0}</Value></Contains></Where>", fileName);
                    fileQuery.ViewAttributes =
"Scope='RecursiveAll'";
SPListItemCollectionlistItemCol = list.GetItems(fileQuery);
SPWorkflowManagerwfManager = portalSite.WorkflowManager;
SPWorkflowAssociationCollectionassociationCollection
= list.WorkflowAssociations;
if(listItemCol.Count > 0)
foreach(SPListItemitem
inlistItemCol)
if(associationCollection.Count > 0)
foreach(SPWorkflowAssociationassociation
inassociationCollection)
if(association.Name == wfName)
                                        item.Update();
                                        association.AutoStartChange
=
true;
                                        association.AutoStartCreate
=
false;
                                        association.AssociationData
=
String.Empty;
                                        StartWF(wfManager,
item, association);
                                        returnVal +=
"Workflow Started";
break;
else
                                returnVal +=
"No workflows are attached to the library.";
else
                        returnVal +=
"A file with the name provided doesn't exist";
                    portalWeb.AllowUnsafeUpdates =
false;
catch(Exceptionex)
            returnVal +=
"Workflow not started, reason: "+
String.Format("Source:
{0}. Stack Trace: {1}. Inner Exception:{2}. Message: {3}. Data: {4}", ex.Source, ex.StackTrace, ex.InnerException, ex.Message, ex.Data);
returnreturnVal;
SPUserTokenGetSecurityToken(stringsitePath)
SPUserTokentoken =
null;
SPSecurity.RunWithElevatedPrivileges(delegate()
            Microsoft.SharePoint.
SPSiteportalSite =
newMicrosoft.SharePoint.SPSite(sitePath);
            token = portalSite.RootWeb.EnsureUser(
"DOMAIN\\ADMIN-USER").UserToken;
            portalSite.Dispose();
returntoken;
privatestaticvoidStartWF(SPWorkflowManagerwfManager,
SPListItemitem,
SPWorkflowAssociationassociation)
SPSecurity.RunWithElevatedPrivileges(delegate()
            wfManager.StartWorkflow(item, association, association.AssociationData,
SPWorkflowRunOptions.Synchronous);
Thank you all for your help.
Regards,

Not able to get Out-of-the-Box Examples Index Page for running the jsp examples

Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas

Hi.
Please post all WLS 7.0 beta questions to the beta newsgroups -
weblogic.developer.interest.70beta.*.
Thanks,
Michael
Vikas wrote:
Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas--
Michael Young
Developer Relations Engineer
BEA Support

Add javascript to Out of the box Modal Dialogue Box in Sharepoint 2010.

Hi,
We have Sharepoint and Project Server 2010 SP-2 enviroment. We are using Project Server Timesheet for our managing Time logging.
Project Server 2010 has "Add existing task" Modal Dialogue box in which I want to add "Javascript" code in order to sort the Project Server Timesheet Line Claasification listbox control in Ascending order.
As you can see from below screenshot "Standard" the Out of the box timesheet line classification is coming at top and then our custom line classification coming.
But I want to sort this list in ascending order so that this "Standard line classification can come at the bottom of the listbox control.
Please suggest me how can I achieve this.
Thanks much !!!
Sachin Vashishth MCTS

Thanks SaiRam from input, I can get JQuery for sorting the control over the internet no issue. I have to pass the ControlId in J-Query to sor the items in that control and I am not able to get the control id as it;s modalk dialogue box.
Can you please explain further here, also let me know in case I am wrong in my understanding.
Thanks !!!
Sachin Vashishth MCTS

Dynamic DNS (via DHCP) out of the box?

Greetings!
I was just wondering... Does OS X support Dynamic DNS updates out of the box?
I can't seem to find any confirmation if 10.5 uses bootpd (which I think it does), and if bootpd supports dynamic DNS updates with the named service built into Leopard Server. There don't seem to be any options in Server Admin to enable this... So I'm a little hazy as how to enable dynamic DNS without compiling my own version of ISC-DHCP.
Just for clarification here; what I'm looking for is the ability to update a DNS zone with a PTR/A record(s) of machines that send a hostname as a part of retrieving a IP address from a DDNS-enabled DHCP server. Ie, "mybox" requests IP from DHCP server, DHCP server updates "mydomain.tld" with a record for "mybox", so that "mybox.mydomain.tld" is resolvable afterwards by the machines on this subnet.
Cheers,
-SC

This is a strange topic because implementing Dynamic DNS on Mac OS X Server looks like it should be child's play... so why hasn't Apple done it? Could it simply be that Apple sees no need for it at this time? Mac OS X clients don't need it to sit happy with a Mac OS X Server. Neither do Windows clients using a Mac OS X Server PDC.
Apple has implemented Dynamic DNS client support into the Active Directory Plug-in in Leopard. In this environment, of course, the client's DNS server is most likely to be an Active Directory-integrated DNS server which happily support DDNS. Unfortunately this Dynamic DNS facility is not immediately available to those not using the Active Directory plug-in.

WC Out of the Box Features

Similar Messages

Maybe you are looking for