WCF-Custom oracleBinding problem

Hello to all,
I have a problem with WCF-Custom. I created two receive ports and two receive locations but both have the same endpoint (oracle db) and I get the following error:
Adress 'oracledb :/ / / test' is Already present for Receive Location 'Test1.ReceiveLocation'. (Microsoft.BizTalk.ExplorerOM).
How can I fix the problem?
Thanks.

Just write anything in PollingID:
oracledb :/ / / test?PollingID=Somethingunique
Morten la Cour

Similar Messages

WCF-Custom performance problem with large response messages

We're trying to debug a performance issue in Biztalk 2013 when using a WCF-Custom adapter to call en external WCF-enpoint.
From a Biztalk orchestration we're calling en external WCF-service to retrieve an xml message sometimes containing a lot of Base64 encoded data. The response message can be up to 10Mb in size. The send port is very slow in retrieving the response
and a 10Mb message can take up to 3min to retrieve. For comparison we've made a console program with the same service reference and binding as the Biztalk adapter uses and we can retrieve the same message in about 3 seconds.
The WCF is using binary encoding over http and we've set the maxMessageSize, maxBufferSize and maxBufferPoolSize to Int32-MaxValue. We realise that using Biztalk there will be overhead because the message is put into the message box but we're unsure how
to improve the performance of the send port.
Any suggestions?

Hello,
There are certain Optimization you can do with your BizTalk.
1)The first thing that I would do is to check the BizTalk SQL server jobs are running correctly
(SQL Sever Mgmt Studio –> SQL Server Agent –> Jobs). Lookout for the jobs with the word “CleanUp” in them.
2)Another check that you could do is to verify the entries in the Spool table
(Database[@Name='BizTalkMsgBoxDb']/Table[@Name='Spool']). Ideally, the number of entries should not be HUGE
(as in not over 100/200 entries)
3) Create seperate host and host handler for your send Port.
4) Set The MaxReceiveInterval from adm_service(BizTalk Management DB) class table 100 ms from 500(By default).
5)Increased the Throttling Settings Internal message queue size to 1000 from 100 In new Application Host.
6)Set the Maximum number of messaging engine threads per CPU to 40 (By default it is 20).
7) Add Max connection in your BTSNTSVC.exe.config file
<system.net>
            <connectionManagement>
                        <add address
= “*” maxConnections = “300” />
            </connectionManagement>
</system.net>
For other setting you can look for BizTalk Optimization Guide
http://www.microsoft.com/en-ca/download/details.aspx?id=10855
Above setting are for generic performance enhancement purpose.
Note: You can verify through Orchestration debugger or Orchestration tracing how much time send port is and pipeline is taking to publish the message to Biz Talk again .
These will give you better picture what more settings you need to apply .
Thanks
Abhishek

Problem with WCF-Custom adapter (WS HTTP Binding with reliable messaaging) - Error event logged, even though transaction completed Sucessfully

Hi All
I am using WCF-Custom (WS HTTP Binding) with Message security as Windows and using Reliable messaging in the send port. Its a static Port.
Every thing works fine as expected for the interface. ie the transaction is success. After a min of the transaction completion. I am getting the following error
01. I have not checked Propagate Fault message (as a solution provided in another blog)
02. Its a static Port
03. I am using reliable messaging
The below error events are logged in the event viewer
The Message Engine Encountered an error while suspending one or more Messages ( ID 5677)
Event ID : 5796
The transport proxy method MoveToNextTransport() failed for adapter WCF-Custom: Reason: “Messaging engine has no record of delivering the message to the adapter. This could happen if MoveToNextTransport() is called multiple times for the same message by
the adapter or if it is called for a message which was never delivered to the adapter by the messaging engine”. Contact the adapter vendor
Should I have log this issue with Microsoft through Service request ? or is there any work around is there. Unfortunate is I cannot remove the reliable messaging from the service.
Arun

Hi,
Is there any solution to this problem?
I am getting the same issue "The transport proxy method MoveToNextTransport() failed for adapter WCF-NetTcp: Reason: "Messaging engine has no record of delivering the message to the adapter.
This could happen if MoveToNextTransport() is called multiple times for the same message by the adapter or if it is called for a message which was never delivered to the adapter by the messaging engine". Contact the adapter vendor"
I checked this link http://rajwebjunky.blogspot.be/2011/09/biztalk-dynamic-request-response-port.html, but
in my case i am not using dynamic port.
In my scenario, i have a number of dehydrated orchestrations that become active every Monday 6:00 AM UTC and make to calls to a WCF service, to spread out the load I have implemented a load distribution logic where orchestrations send request to service
in every 1 minute (not at the same time). but still i get this error sometime.
I have opened a ticket with MS support but thought that someone might have already found the root cause.
Let me know if there is one.
Thanks,
Rahul
Best Regards, Rahul Dubey MCTS BizTalk Server

WCF-Custom Biztalk 2013 - Access to SQL Server 2014 Database

Hi,
i don't see nowhere of capability from the Biztalk adapter to access differente version of Sql server.
I want to send ou receive information with a WCF-Custom from SQL Server 2014, i'm in Biztalk 2013 (not R2 ) it's possible ?
Do you have a link or a list of version autorized to accessed by the wcf-custom Sql binging ?
Thanks a lot

Hi, I can suppose that the main problem for Joao is not if it works in general or not.
The real problem is that he is not sure if this configuration is officially supported by Microsoft.
If you are developing an integration project for a client you need to have this guarantee. If not, you can have an unsupported scenario, and if something fails you could have a big problem with your client.
If I were you, I would talk with the client account manager about this.
Regards.

Issue with WCF-Custom adapter polling Oracle db

Hi,
I have a scenario where BizTalk connects to Oracle db using WCF-custom adapter with OracleDbBding which has queries at P below properties:
PolledDataAvailableStatement
PollingStatement
PostPollStatement
The interface was working for more than 2 years, but when oracle server is moved from prod to DR server, it started throwing crazy errors.I have gone thru many blogs there seems to no definitive answer or solution for this.
I have been getting below errors:
The adapter "WCF-Custom" raised an error message. Details "The faulted WCF service host at address oracledb:// could not be restarted, and as a result no messages can be
received on the corresponding receive location. BizTalk Server will continue trying to start the service host until it succeeds or the receive location is disabled.
The adapter "WCF-Custom" raised an error message. Details "The faulted WCF service host at address oracledb://xxxxx/?PollingId= could not be restarted, and as a result
no messages can be received on the corresponding receive location. BizTalk Server will continue trying to start the service host until it succeeds or the receive location is
disabled.
To fix the problem, you may choose to:
1. Use the error information given to fix the problem.
2. Restart the receive location.
3. Keep waiting for BizTalk to recycle the service host. Another event will notify if the service host is successfully started.
Detailed error information: Microsoft.ServiceModel.Channels.Common.ConnectionException: Connection request timed out ---> Oracle.DataAccess.Client.OracleException Connection
request timed out    at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object
src, String procedure)
   at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src)
   at Oracle.DataAccess.Client.OracleConnection.Open()
   at Microsoft.Adapters.OracleCommon.OracleCommonConnectionWrapper..ctor(String connectionString, OracleCommonExecutionHelper executionHelper)
   at Microsoft.Adapters.OracleDB.OracleDBConnection.Microsoft.ServiceModel.Channels.Common.IConnection.Open(TimeSpan timeout)
   --- End of inner exception stack trace ---
   at Microsoft.Adapters.OracleDB.OracleDBConnection.Microsoft.ServiceModel.Channels.Common.IConnection.Open(TimeSpan timeout)
   at Microsoft.ServiceModel.Channels.Common.Design.ConnectionPool.GetConnection(Guid clientId, TimeSpan timeout)
   at Microsoft.ServiceModel.Channels.Common.Design.ConnectionPool.GetConnectionHandler[TConnectionHandler](Guid clientId, TimeSpan timeout, MetadataLookup metadataLookup,
String& connectionId)
   at Microsoft.ServiceModel.Channels.Common.Channels.AdapterChannelListener`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open()
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint.Enable()
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint.RecycleServiceHost(Object unused)".-------------------------
The adapter "WCF-Custom" raised an error message. Details "System.ServiceModel.CommunicationObjectFaultedException: The communication object,
Microsoft.ServiceModel.Channels.Common.Channels.AdapterInputChannel, cannot be used for communication because it is in the Faulted state.
   at System.ServiceModel.Channels.CommunicationObject.Close(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Close()
   at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.Close()".

"Oracle.DataAccess.Client.OracleException Connection request timed out    at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object
src, String procedure)"
Looks like it's the Oracle client that can't connect. Can you run any queries from the Oracle tools?

Error in WCF custom behaviour

Hi All,
Its been quite some time i am struggling with this issue.
we have a wcf custom behavior which validates the schema. on top of that i have implemented logic to remove any attachment node (in received xml file we have a record called attachments which intern contains element which holds attachment data) if size is
greater than 2.5MB then re construct the element with value saying "your attachment has been removed".
code every thing is working fine with single message but when do a load test (with thread = 5 and number of test =10 in SOAP UI ) then getting a below warnings. (with single thread is working fine)
The adapter "WCF-CustomIsolated" raised an error message. Details "System.Xml.XmlException: The input source is not correctly formatted. at System.Xml.XmlExceptionHelper.ThrowXmlException(XmlDictionaryReader reader, String res, String
arg1, String arg2, String arg3) at System.Xml.XmlBufferReader.ReadValue(XmlBinaryNodeType nodeType, ValueHandle value)
The adapter "WCF-CustomIsolated" raised an error message. Details "System.Xml.XmlException: The prefix 'k' is not defined.at System.Xml.XmlExceptionHelper.ThrowXmlException(XmlDictionaryReader reader, String res, String arg1, String arg2,
String arg3)
below is the code used to read the attachment size
using (AttachmentReader = message4.GetReaderAtBodyContents().ReadSubtree())
while (AttachmentReader.Read())
if (AttachmentReader.IsStartElement())
strNs = AttachmentReader.NamespaceURI;// read the namespace of message for schema validation
while (AttachmentReader.ReadToFollowing(AtmtNode)) //read attachment node
countAttachment = countAttachment + 1; //count the number of attachments in a message
AtmtSize = AtmtSize + AttachmentReader.ReadElementContentAsString().Length;// check the size of attachment content node
AttachmentReader.Close();
//check of the size greater than 2.5MB
IsSizeMax = (AtmtSize > System.Convert.ToInt32(validateAtmtSize)) ? true : false;
//if size is greater than 2.5MB then remove the attachment node and reconstruct the same
if (count == attachmentCount) // Finally write the attachment node with configured message (converted to base64) this will read all the attachment nodes and writes only one record inspite of multiple attachments
if (HasAtbt) // if "attachments" record has any attributes then create attachments record with
along attributes
wr.WriteStartElement(AtmtRecord, Ns);//This will create "attachments" record with
attribute
wr.WriteElementString(AtmtName, "RemovedAttachment.txt");//"attachment_content_name"
wr.WriteElementString(AtmtType, "text/plain");//"attachment_content_type"
wr.WriteElementString(AtmtNode, Msg);//attachme content node
wr.WriteEndElement();wr.Flush();
wr.Close();
bodyReader.Close();
strMsg = SB.ToString();
int fIdx = strMsg.IndexOf("</" + RefId + ">");
int lastIdx = strMsg.IndexOf("<" + RefId);
parashuram

Hi，
Please refer to the Q and A
http://code.msdn.microsoft.com/windowsapps/How-to-integrate-BizTalk-07fada58/view/Discussions

Customer Service Problems

After fighting with Verizon customer service over two service issues without any possibility of resolution I am canceling my account.
I’m doing this reluctantly because as a long-term shareholder of Verizon I would like to see the company succeed and keep profitable. Yet I am appalled by the cavalier, disrespectful, obstructionist treatment from your staff in dealing with customer service problems. When you were just the telephone company and operated as a monopoly in a regulated industry, you had to take customer issues seriously.   Now that you are an unregulated telecommunications giant it seems that you don’t feel the need to respond to your customers. Someone in your company needs to hear this and put a stop to these destructive business practices.
In brief, the first issue involved arranging a service call for interruption of internet service. The entire process kept me on the phone for a total of 3 hours over several days. I have given up my land line and use a cell phone exclusively. Verizon’s communication systems and staffing levels caused me to wait on hold for 10-15 for each person that I spoke to. Then each conversation averaged 10 minutes.   In addition, I was transferred to different departments but I did not understand the reason for the transfers. Then the pattern of hold-talk-transfer began again. Several times my calls were dropped necessitating more repeats of the hold-talk-transfer pattern. Some of your staff were South Asian and they either garbled or misunderstood English, thus prolonging the conversation beyond the average of 10 minutes.   During that time I incurred cell phone charges of $.45/ minute.
After the service was restored I called Verizon customer service and asked for a service credit to compensate me for those out-of-pocket expenses over and above 30 minutes which I consider to be a reasonable amount of time to arrange a service call. They denied any responsibility for the amount of time it took to arrange the service call or the amount of time to complain about their service. I was not happy with the outcome so I requested to speak with someone who was a decision maker and had authority to negotiate a settlement. I also asked to have them communicate with me through email. I was told that communicating through email was not possible. These calls followed the same pattern of hold-talk-transfer averaging 30 minutes each. I repeated myself to 3 or 4 people who wrote down my complaint before I got to a manager who had decision making authority. The manager denied any responsibility for the amount of time it took to arrange the service call and would not authorize a service credit.
The second issue involved billing. I signed up for auto-pay to have my monthly bill deducted directly from my bank account. Verizon’s computer system deducted the bill twice, overdrawing my account. I incurred a bank overcharge fee. The same pattern of hold-talk-transfer began for this complaint as well. The customer service staff refused to take responsibility for this error as well. Their solution required me to spend more time and incur extra expenses. I had to repeat myself to 3 or 4 complaint takers before I reached the same manager who denied my first request. He denied any responsibility for this billing problem too.   I had to have my bank retrieve the money under a fraud compliant.
Verizon is one of the largest *communications* corporations in the world.  If your internal systems can't handle customer service calls in a reasonable amount of time, then there is a problem. If your customer service staff is unwilling to take responsibility for such inadequacies and solve the issues that emerge from them, then there is a problem. If a customer has to contact the CEO of the company to try to resolve two service related issues, then there is a problem. When all of those actions prove inadequate, then there is a *communications* problem.
Customer service has flagged my account and put me down as a “problem” customer. Instead of offering even a token settlement, they are prepared to stonewall me by maintaining that the company is just not at fault and that they tried to solve the problems but I wouldn’t cooperate or accept their solutions. Early on in the process, if someone told me that Verizon messed up just a little, but still couldn’t compensate me, I would have accepted that, albeit reluctantly, and dropped the matter.
This is not the way I do business and I resent it when others don’t feel the need to honor any kind of code. I grew up working in my family’s retail liquor store. From the time I was a kid I learned four customer service lessons that I’ve carried over into my adult life:
Admit when you are wrong and try to make up for the mistake.
Never argue with a customer over small things.
Listen to the compliant and don’t just dismiss it out-of-hand
Try to make things right even though you may not be directly responsible for problem.
For my two problems, Verizon customer service staff didn’t even come close to following these common sense rules. I’ve learned that if you ask their customer service people they will repeat back to you some type of business code that they say they operate under. But their behavior tells a different story.
Unfortunately when I spoke with {edited for privacy} of the Executive Presidential Appeals office, I was taken somewhat aback by his manner and demeanor, which was coarse and inappropriate for a customer service discussion, and which I found personally offensive. He and members of his staff agreed to send me emails specifying which part of the Terms of Service they based their decisions on. To date I have not received the communications they promised.
Is this the image of your company that you want the public to see? Are you willing to just shrug off these complaints as an isolated case that is too small to concern yourself about? I’m afraid the answer will be yes. Not only do you feel that you are too big to fail, but you are too big to care.   Customer service means solving problems not manufacturing bad will and resentment.
My purpose in writing this note has been twofold: to make one last effort to solve my problem and to hope that someone will take note about the issues about customer service practices that are harmful to the company. I'd be happy to speak with someone with real authority to deal
with my issues but have no interest in repeating my past experiences.
It's too bad that this had to happen since the solution could have been so easy and simple.
I plan to publish some form of this letter and distribute it to the public.
Solved!
Go to Solution.

Therefore, I request to please clear this unacceptable due balance, and contact Experian to removed and clarified the mistake in my credit report.
RE:  Cancellation fee charged on internet DSL service charged by mistake. {edited for privacy}
A $65 balance remain for a cancellation fee on internet DSL service, by Verizon New York mistake.
In February of 2010, I set up my phone and TV in a vacation plan but keep my internet service active. After a month I had a vacation plan, suddenly without notification, my internet service was suspended and a cancellation fee was issued.
My final statement was $ 24.47. I cleared a check from Verizon.
I contacted Verizon online to request connect my internet service and discuss the issue on the cancellation fee. The response was that I should pay the internet cancellation fee, and paid a new activation.
After fighting with Verizon customer service over the unacceptable fee charge service issue without any possibility of resolution I cancel my home phone which was in a vacation plan.
Later I kept receiving the statement with this cancellation fee every month. I called and discussed the issue more than 6 times during the next 6 months, The entire process kept me on the phone for a total of 2 hours over several months. The costumer representatives responded that the issue was in an investigation.
Later,  a Collector company start chasing me to get the $65 paid. Phone number: {edited for privacy}, Inclusive, they made an offer to reduce the amount if I accept to pay or contact Verizon to request a clarification.
By the end of the year, I contacted Verizon costumer services one more time but the representative stated that the account is not visible anymore.
Convinced that the problem on this account was resolved, the second week of November, I called Verizon to reestablish my account with a new home phone number and Internet DSL connection.
The answer was that  following Verizon policy I was unable to get a new account if a balance remain.
After I explained the events, a manager (non-identified) who spoke to me by phone told me that Verizon will investigate the issue and I should wait for approval.
On November 16, my account was confirmed approved and clear of debt, therefore, Verizon welcome me back with Home phone and internet DSL Service and confirmation on my online registration.
New number:{edited for privacy} ; Email:{edited for privacy}
Also, during the months of January and February 2010, Verizon New York, made other charges mistakes in my account (See details below) that have been resolved with an apologize and a refund.
Events that prove the lack of training and support Verizon customer and billing service have.
Chronology of the emails exchanged between Verizon Ecenter and myself after I requested investigation with the charges.
01/10/10   I have contacted Verizon customer support regarding of a mistake in my internet service statement.Tracking # 430824. Reference: Duplicate charges for Internet Security suites service.
1/12/10 Verizon eCenter responded. Angela. ' Apologized for the inconvenience. 'The cancellation and credit will appear on the next bill'.
2/08/10 Verizon eCenter responded. Cheniqua. 'I have issued a credit of $6.52 for a Verizon internet security suite charges'; your internet charges
2/04/10 I have contacted Verizon customer support in regard of clarification in my Direct TV  statement.
Tracking # {edited for privacy}. Reference: Balance from Direct TV due to my recently requesting vacation plan.
2/06/10 Verizon eCenter responded (John) Verizon Bill statement: February 26 = $6,73 paid
2/06/10 I have contacted Verizon customer support in regard of a mistake in my home phone statement.
Reference: By mistake, international fee in my home phone (inactive line/vacation plan) was charged.
Tracking # {edited for privacy}
2/08/10 Verizon eCenter responded. (Linnette) 'I apologize for the error'.
A credit for the international plan has been applied to your account and will appear on the next statement.'
2/08/10 Verizon eCenter responded (Cheniqua) 'The regional essential calling plan does not qualify for a discount during vacation suspension. Which prove that my home phone was in a vacation plan.
2/15/10 I have contacted Verizon customer support in regard of a non-notified, neither requested suddenly suspension on my internet DSL service and charged a cancellation fee for this suspension.
Tracking # {edited for privacy}
2/16/10 Verizon eCenter responded (Michael) I am sorry for the inconvenience you have experienced.
Please contact our Consumer Sales and Solutions Center directly at 1-800-Verizon or (800) 837-4966
Monday through Friday between 8:00 AM to 6:00 PM Local Time.
2/16/10 Verizon eCenter (Sue) responded : I am sorry for the inconvenience you have experienced.
I understand your frustration and concern regarding canceling your internet service in error. In order to provide you with the best customer service, please contact our Consumer DSL Sales and Solutions department directly at (800) 567-6789 and a representative will be happy to assist you.
I stand on my decision of not pay for someone else mistakes.
Your actions have damaged my integrity as a good costumer and citizenship.
Without doubt after this problem get clearly resolved, you will lose this good costumer, get a negative feedback and I am planning to publish this letter at every web forum available.

BizTalk 2010 - WCF-Custom Adapter with sqlbinding - rror was encountered while attempting to transmit the message

BizTalk 2010 RTM version with SQL 2008 R2 .
An intermittent issue with the WCF-Custom adapter with sqlbinding, calling a SQL stored proc as below
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit the message" .
Event log shows
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is suspended. Error details: Unknown Error Description
Any advice please. Thanks
Sullu.
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Hi Chen
Is there any update on this please ?
I have applied the latest CU and have noticed the following issue.
BizTalk 2010 Enterprise Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack works fine , no issues noticed.
However ,
On a DEV VM ,BizTalk 2010 Developer Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack still gives the error mentioned in this post.
In addition Microsoft BizTalk Adapter Pack ,Microsoft BizTalk Adapter Pack(x64) & WCF LOB Adapter SDK are also installed .
Below is the Error message.
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit
the message" .
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is
suspended. Error details:
Unknown Error Description
Could you please check and advice what needs to be done to resolve this ? Thanks .
Regards,
Sullu
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Error in WCF-Custom adapter (sqlbinding)

There is a stored procedure tempdbo.dbo.InsertArTrxTyp. I used the Add Generated Items wizard to create the schema and binding file for the stored procedure. Import the binding file and get a send port, type WCF-Custom, with sqlbinding. When
the port action header is
<BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="InsertArTrxTyp" Action="Procedure/dbo/InsertArTrxTyp" />
</BtsActionMapping>
The event log shows error
<Operation Name="InsertArTrxTyp" Action="Procedure/dbo/InsertArTrxTyp" /></BtsActionMapping>" was not understood.
If I reduce the action header to
Procedure/dbo/InsertArTrxTyp
the event log shows
Object [dbo].[InsertArTrxTyp] of type StoredProcedure does not exist
In the second case, SQL Profiler shows the code sent to the sql server querying for the existence of
@ORIGINALOBJECTNAME=N'InsertArTrxTyp',@ORIGINALSCHEMANAME=N'dbo'
If I run that code, I get results that indicate the existence of that object.
Why is the fist action mapping wrong? Why does the second action mapping result in no object found? I've read this
post but don't see how it applies to this situation as I'm not using an orchestration.

Hi,
Try and check following points:
1. Update the SQL URI with the complete SQL instance name, if you are using the a named instance.
2. Verify if the user, under which BizTalk host instance in running, have suffecient rights on the target DB to execute the SP.
Hope this will help.
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

Combo of T61 and customer support problems

My main problem is that my T61 freezes up. It came with a 2 gig ram, sbbb Intel core 2 duo t7500 processor, 1 gig turbo memory window's ultimate 32 bit os and an 80 gig hard drive. This problem has been going on intermittently (odd) since I received the laptop brand new. I may or may not be able to move the cursor over the screen when it is frozen. It does not high light anything, control-alt-delete does not work, nothing responds. I have to manually hold down the power button to turn the system off.
The different things it has done, and not all during the same occurrence: blue screen with white writing, black screen with white writing, black screen oxc 000000f-selected entry could not be loaded because application is missing or corrupt, the memory was dumped (I had used rescue and recovery backup disks then because I did not know if something was corrupt in the original software that came loaded on it), sometimes it checks the c-drive after being manually shut down, sometimes it does not, problem with window's registry (only did that maybe twice), and corrected master file table, corrected bit map (after checking c). Sometimes it freezes and gives no error messages during restart. I do not have anything loaded on this system that is not compatible with vista nor anything that exceeds the ram.
When I had to use my rescue and recovery disks because everything crashed, I called tech support. They told me I needed to update my drivers-especially my video driver. I tried to tell them that I had been going to the lenovo website for driver updates, using pc doc, updating bios, doing a registry cleanup, defraging the hd, and of course window's updates. So he gave me a link on lenovo's website for another update. During that call, I told the guy that the recovery disks that came with the laptop loaded XP on my system. He sent me out vista recovery disks-vista business, not ultimate, and it was freezing up on vista and xp-no matter what program I was using. The next time I called, lenovo had my computer shipped back and replaced the corrupt 2 gig ram. It came back with the same software it left with, so I know my hard drive had not been wiped. On the third call I was told to update my drivers, check the hard drive using bios, that it was my web browser, remove the battery.... By this time I was wondering about technical service which leads me to my other issue.
I called the month after my warranty ran out, because I thought I had an established history of problems with this $1600+ laptop that has not worked right, and I was told that the warranty had run out, they would not honor it, records after 30 days were wiped-so there went my established history. Now someone please tell me why a computer company would not keep records of customers warranty work requests? Especially during the warranty period. I was then given the number to out of warranty claims who told me it was out of warranty (duh) and she gave me the number to entitlement. They called me the next day, which was nice but unfortunately I was not expecting their call and did not have all my info available. Entitlement told me that someone from tech support would call me within the hour. My computer proceeded to freeze up-so I left it frozen while waiting for tech support to call. They did not so I called them, was told my warranty was out of date and I was transferred to another number. Now this entire time I had been polite in my requests and conversations, my family had even alerted them to a billing error that would have caused another customer some problems. The tech I was transferred to was extremely rude the entire time. I was not given the opportunity to explain my situation-which was what entitlement said the call would be about. I requested mediation, he told me someone would call me within two days, then he proceeded to hang up on me. No one has called.
I would appreciate some assistance, in my computer problems and how to get in touch with the right person about customer service. Thank you.

obviously you have suffered a lot with the laptop os not working properly, have you tried to disable the turbo memory, sometimes that cause alot of trouble.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Reading message contexts from WCF custom behavior

Hi,
I'm trying to create a WCF custom behavior extension because I can't simply use out of box WCF adapters without this customization. I'm trying to write some custom code in BeforeSendRequest() method in the message inspector, and I wonder from here if
I can access to message contexts.
Thanks for you help in advance!

Hi,
Message Context is not directly available at WCF adapter as it gets copied to WCF Context. Below are couple of links which might be useful to progress with:
http://blogs.msdn.com/b/akshar/archive/2010/09/10/promoting-a-wcf-message-header-to-biztalk-message-context-using-wcf-adapter.aspx
http://blogs.msdn.com/b/skaufman/archive/2009/06/10/exposing-custom-wcf-headers-through-wcf-behaviors-part-2.aspx
Hope this will help.
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

Can Wcf-Custom Adapter implement Wcf-WebHttp Functionality?

Can the Wcf-Custom adapter implement the same functionality as the Wcf-WebHttp adapter in BizTalk 2013? In particular, can it provide the same functionality as the operation map and the variable map? If not, is there any other way to provide Wcf-WebHttp
functionality without hosting an adapter in IIS with an isolated host?
Thanks!

Yes, but...
You can set the mappings on outgoing messages with some new Context Properties. This describes how to do it on a Dynamic Port, but it should work the same on a static port.
http://masteringbiztalkserver.wordpress.com/2013/11/11/calling-restful-service-using-dynamic-send-ports-biztalk-2013/
The receive side is a bit different since I'm 97% sure all the mapping happens in the BizTalk Adapter (WS-WebHttp) not any of the binding elements.
However, you can essentially replicate that functionality with a Custom Pipeline Component. In that case you would use the WCF-Custom Adapter with the webHttpBinding.

WCF-Custom Porblem

hello to all,
I have a wcf-custom with with sql-bindind on a send port. But I get the following error:
. It will be retransmitted after the retry interval specified for this Send Port. Details:"System.Transactions.TransactionException: The transaction has already been implicitly or explicitly committed
or aborted. ---> System.Runtime.InteropServices.COMException: The transaction has already been implicitly or explicitly committed or aborted (Exception from HRESULT: 0x8004D00E
could you help me?
thaks

Sounds to me like
-You are calling a Stored Procedure that is committing a Transaction inside itself.
-Using AmbientTransaction on your Send Port.
The SP should not create/commit/rollback transactions itself, but leave that to the "outside world". However if you cannot change this you will need to set UseAmbientTransaction to False on your Send Port SQL Adapter binding properties.
Morten la Cour

WCF Custom adpter configuration to CRM

Hi,
I am using WCF-Custom send port to communicate to CRM WCFService. I am getting the below error. I am not able to edit any properties.
Error Description: System.Configuration.ConfigurationErrorsException: The binding at system.serviceModel/bindings/ws2007HttpBinding does not have a configured binding named 'UserNameWSTrustBinding_IWSTrust13Async1'. This is an invalid value for bindingConfiguration.
at System.ServiceModel.Configuration.BindingsSection.ValidateBindingReference(String binding, String bindingConfiguration, ContextInformation evaluationContext, ConfigurationElement configurationElement)
at System.ServiceModel.Configuration.IssuedTokenParametersEndpointAddressElement.Validate()
at System.ServiceModel.Configuration.IssuedTokenParametersElement.ApplyConfiguration(IssuedSecurityTokenParameters parameters)
at System.ServiceModel.Configuration.IssuedTokenParametersElement.Create(Boolean createTemplateOnly, SecurityKeyType templateKeyType)
at System.ServiceModel.Configuration.SecurityElementBase.CreateBindingElement(Boolean createTemplateOnly)
at System.ServiceModel.Configuration.SecurityElement.CreateBindingElement(Boolean createTemplateOnly)
at System.ServiceModel.Configuration.SecurityElementBase.CreateBindingElement()
at System.ServiceModel.Configuration.CustomBindingElement.OnApplyConfiguration(Binding binding)
at System.ServiceModel.Configuration.CustomBindingElement.ApplyConfiguration(Binding binding)
at Microsoft.BizTalk.Adapter.Wcf.Converters.BindingFactory.CreateBinding(String wcfExtensions, String bindingName, String bindingConfiguration, String bindings)
at Microsoft.BizTalk.Adapter.Wcf.Config.CustomTLConfig.CreateBinding(THConfig thConfig)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.InitializeValues(IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2..ctor(IBaseMessage message, WcfTransmitter`2 transmitter)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfTransmitter`2.GetClientFromCache(String spid, IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfAsyncBatch`2.BatchWorker(List`1 messages)

Laxme,
As suggested by M.R.AshwinPrabhu,.
in his post below.
http://social.msdn.microsoft.com/Forums/en-US/c94dd38a-7322-4286-8dc6-e1e57c0c22c4/getting-error-while-try-to-create-an-record-in-crm-2011-from-biztalk-2010?forum=biztalkgeneral
Try following steps:
First make sure basic are correct:
Ensure the security configuration in your WCF send port are correct.
Make sure your binding matches with the client's binding.
Follow these solutions:
In many user's cases this issue is also due to clock's synchronization. Try as mentioned in the below mentioned link in reference section.
If the above doesn't work try this
Reference:
http://weblogs.asp.net/pabloperalta/archive/2012/05/14/quot-an-error-occurred-when-verifying-security-for-the-message-quot-when-executing-savechanges.aspx
WCF
Message Authentication Failure
http://parwej.wordpress.com/2009/09/04/an-unsecured-or-incorrectly-secured-fault-was-received-from-the-other-party/
Adding
to it, i would also suggest to check the certificate, it should be there in "trusted root provider" folder.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful
by clicking the upward arrow mark next to my reply.

WCF Custom - Solicit response port - System.ArgumentException: The provided URI scheme 'https' is invalid; expected 'http',

Hi,
BizTalk WCF Custom Adapter - is send in a solicit response port. It works with a http address.
However, I need to point it to a Https location.
I imported the bindings, and changed the address to https. I was able to re-import the bindings. The send port gets started. But, when we try send a message via the send port, it throws an error:
Error Description: System.ArgumentException: The provided URI scheme 'https' is invalid; expected 'http'.
Parameter name: via
Any help is appreciated.
Regards,
Sharmishtha

The error logs do not give any other information.
Also, security is TransportCredentialOnly, with Basic - Client Credential Type.
Regards,
Sharmishtha
Hi Sharmishtha,
TransportCredentialOnly mode
does not provide message integrity and confidentiality. It provides HTTP-based client authentication. You need to use either of the below security mode :
Transport
TransportWithMessageCredential
Rachit
Please mark as answer or vote as helpful if my reply does

WCF-Custom oracleBinding problem

Similar Messages

Maybe you are looking for