WCF-WebService count, accessed by the end user, the wcf-webservice published BizTalk orchestration as wcf-webservice.

Hi BizTalk Experts,
Please help me out, following is my scenario.
I had published orchestration as wcf-service, for integration purpose. Now I need to count, how many times the service accessed and failed and successful bye users.
Thanks
Teegala.
Teegala

If you need to know how many times the orchestration was called, you can use BAM just like when the orchestration wasn't exposed as web service.
The success/failure rate depends on what you mean by that: functional (which is part of the workflow in the orchestration) or technical (which is infra related).
Jean-Paul Smit | Didago IT Consultancy
Blog |
Twitter | LinkedIn
MCTS BizTalk 2006/2010 + Certified SOA Architect
Please indicate "Mark as Answer" if this post has answered the question.

Similar Messages

How do I access the End User Licensing Agreement? I clicked on it and it gives me a message that I need to launch Adobe Reader, accept and close and reopen. Trouble is I can't get to an icon for file to launch. I am working on a Mac and have installed Mac

I am using a Mac and have installed Adobe Reader for Mac, latest version. I cannot access the End User Licensing Agreement. I clicked on it and it gives me a message that I must launch Adobe, check that I agree, close and reopen. The problem is I can't find any way to launch Adobe because it appears nowhere on my launch pad, nor in my document files or on the control panel. Because of this, I cannot print bank statements nor can I get into my insurance companies billing department to make a payment. HELP!

How about in your Applications folder?

"Adobe Acrobat is blocked" - Where to I accept the end user agreement which will enable me to access Pdf documents on the web?

I keep getting this message when trying to open documents from the web:
"Adobe Acrobat is blocked" -
Where to I accept the end user agreement which will enable me to access Pdf documents on the web?
The Adobe website recommends this: (did not solve the problem)
Safari 7 and 6.1 block PDFs | Acrobat, Reader
Thanks for any help solving this annoying problem!
OSX 10.9.3
Safari 7.0.4
Acrobat Pro 11.0.0

Hello Isakten:
Thanks so much for your reply!
I already have Adobe Reader 11.0.7 and Adobe Acrobat Pro 9 installed.
Following your instructions, I then selected Reader as the desired Adobe product to open all PDFs. and save that choice. Still no difference, the same black screen and statement about the EULA shows up…
http://www.nhgastro.net/patients.html
BTW, this is the website that I was accessing……note the link to download and print the pdf which triggers the EULA page.
and also downloaded the latest version of Reader via their link….but to no success…..
This all started by itself months ago, I did no newer installs or settings changes, none……
Any other thoughts?
Thanks so much,
Steve

How do I find and agree to the End User License Agreement

I can't download any PDF's, I get a message that says open Adobe Reader and agree to the End User License Agreement. How do I access this??

It seems to be a chrome issue. I tried it in firefox and it worked ok...

Presently using iMac: OS X 10.9.4 (13E28) 1. Open website; click drop-down and this appears: Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser. 2. Usi

Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.com

Sorry if I failed to mention, I have done this as well.

If the end user doesnt have acess to go through session

if the end user doesnt have acess to go through sessions , how could he know the errrors occured in his process. can any one sugest me an answer...
and the data transfer shld be done through session method only, we r not using call transaction......
thank u
with regards.........

there is no other option expect that he should either have the access to check the sessions or else someone who runs the sessions need to get the error log and mail to the user....
also just u can let know the queue id generated for the session and using program RSBDC_ANALYSE u can check the logs.

"first open Acrobat and accept the End User Agreement License" with black window? Cannot open downloaded PDFs

I have CS5 installed and operating in my MacBook Pro since 2012.
Several months ago, I ran not an issue where by, when trying to download PDFs from any website, I get the following back screen and message"
"Before proceeding, you must first launch Adobe Acrobat and accept the End User License Agreement"
The screen gives me no options to do this and, regardless of what I do, the same window with the same message opens…….
Does anyone know how to address this? FYI. I can use Acrobat Pro 9 to assemble and create PDFs, this is the ONLY problem that I am dealing with.
Thanks so much!
Steve

Hello Rave!
Thanks for remembering me!
No, I was never able to get this to work.
What I found, however, is that I can view the pdfs normally if I use Firefox instead on my default, Safari…….not much of a fix BUT at least I can access the pdfs now……..I just don't understand why this seems to happen in Safari only………Safari is updated to the latest version via Software Update in Mac OS 10.7.5….
Thanks again!
Steve

Summary Management - Can't select Items in the End User Layer

I wan't to set up a Summary on a folder but in Summary Wizard Step 2 I can't select From Items in the End User Layer as it's greyed out!
Any ideas?
Suhada

Hi,
Worth checking that the user/responsibility has "Create/Edit Summaries" privilege and that the user/responsibility has "Allow Administration" access to the business areas.
Also check that the database user has CREATE/DROP/ALTER ANY MATERIALIZED VIEW and GLOBAL QUERY REWRITE (see http://download.oracle.com/docs/html/B13916_04/mging_sums.htm#i1011476 for full details)
Rod West

Hi all, as part of my job i need to educate the end users about BW..

Hi All,
As a part of my job i need to educate the End users about the BW. So, for that purpose i need prepare on fine doucment which is easy to understand by end user community. Any documents about this will help a lot.
Could you pls send to this mail id [email protected]
Points will be awarded for this..
thanks in advacne..
Thanks & Regards,
Suresh..

Hi
I dont know what everyone is sending, but there is No standard BW end user manual. Every company / project has different requirements and the queries and reports generated contain different data. Its best to use one of the templates available in WIKI. A simple document for end users should contain screenshots of the query/application and steps taken in order to access the query. If you have sharepoint or some other shared directory you can also add screencam videos training users how to use the BW system. This has always been a good way to teach end users.
Hope this helps.
Thanks

You do not have access to any End User Layer tables

Hello Guru's!
I'm having an issue with connecting/using EULs on Disco 10g - I have already installed 10g Admin and configured 2 EULs and also imported the sample data - they are all owned by DISCO user -
When I connect to http://discoserver:7778/discoverer/viewer, I get a connection screen - no connections are listed, so I click create connection - I give it a name, put in disco as my user, put my password in, put db_connect_string into the appropriate field, where db_connect_string is my actual connect string - and it gives me this error:
Error
Authentication Failed.
(You do not have access to any End User Layer tables)
I have access to these, as I'm the EUL owner - I've also tried this tho with other users that I have granted access to in the admin too (I've even granted access to these EULs to public - still no luck) - should I be using the db user and password or are there other places in 10g that I set up disco users?
If I should be using the db user and pass, why won't it see my EULs?

Hopefully CupJr got his answer as it's been over 2 years!
However, if you're having the same problem ...
1. is this an Apps EUL and you're connecting as a database user (ie: the owner of the EUL)?
2. have you set the gateway connection info correctly (again if an Apps EUL)? - found at: Tools -> Options -> Connection.
Russ

I Got This message The End user is corrupt

Hello world ,
some user i can access to Discoverer but with one user i cannot ,
i got this message
The End user is corrupt -to connect to this EUL you must drop it and restore it from backup.
Thanks

Wow, talk about user error! ha!
A few questions.
What version of Discoverer are you on?
Do all users referenced connect to the same EUL?
Has anyone done any manual editing of the EUL tables?
- James

Unable to connect End user layer /You do not have access to any end user Layer tables

I get the following error message in Disco Admin ver 4.1.33.1.6 :
1)Unable to connect End user layer
In disco plus I get the follg error:
a)You do not have access to any end user Layer tables
This is despite the fact that my userid/passsword combination@databaseid has acess to all tables in Oracle sqlplus SQL*Plus: Release 8.0.6.0.0 -
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.1.0 - 64bit Production
With the Partitioning option
JServer Release 8.1.7.1.0 - 64bit Production
Please reply ASAP if anyone has any ideas
Thanks
Gurman
null

Have u created a EUL for your user through Administration Edition.
If not login as a user who has DBA rights and create EUL for your user.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Gurman Sandhu ([email protected]):
I get the following error message in Disco Admin ver 4.1.33.1.6 :
1)Unable to connect End user layer
In disco plus I get the follg error:
a)You do not have access to any end user Layer tables
This is despite the fact that my userid/passsword combination@databaseid has acess to all tables in Oracle sqlplus SQL*Plus: Release 8.0.6.0.0 -
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.1.0 - 64bit Production
With the Partitioning option
JServer Release 8.1.7.1.0 - 64bit Production
Please reply ASAP if anyone has any ideas
Thanks
Gurman
<HR></BLOCKQUOTE>
null

You don't have access to any End User Layer table

Hi
When I created a EUL using Discoverer admin, and also created a business area successfully, then I can't logon using same username in Discoverer desktop, My Discoverer version is 4.1.37. when I logon, I received error message read: You don't have access to any End User Layer table.
Could someone please give me some instruction, or guide me to do something.
.

Hi Prathima
You should not be able to connect to an Apps mode EUL as an end user in the end user tools.
As for administration, you need to log in as the owner of the EUL, a database user, and then assign admin rights to an Apps account. Many companies use the SYSADMIN Apps account for this purpose. After you have assigned an Apps user to have admin rights don't forget to grant that user admin privileges over each of your business areas.,
With this done you should then manage your Discoverer administration using the Apps account.
Page 14 to 20 of the document called Setting up an Apps mode EUL may help. This document is available for free from my website here: http://ascbi.com/downloads/downloads.htm
Best wishes
Michael

Find the User ID through which the end user logged in BEx Analyzer?

I want to fetch the end user USERID who is executing the query. I am the end user and want to view a report, so I will login into BEx Analyzer with my userid and start executing query. Is there any way I can find that ID, in any table, program, function module or some where........?
I don't want 'created by', 'last changed by'. I want ID through which end user is logging into in Analyzer.
Also if the end user is logging in through RSRT wanted to know the SAP login user ID through which the user logged in?

Hi,
If you want to see the end user id that is running the query, and then open the workbook, select Layout from the menu u2013 Display Text elements. Click on All (or General, Filters or Variables based on your requirement). It will display the technical name, info provider, current user details. You can save it as existing work book transport to production, then when this query executed you can find end user login id.
May be you can check RSRWBTEMPLATE table for workbook users details. Mostly end user will not have access to RSRT.
Hope it helps you
Thanks
Riyez

Unable to connect to : eul4_us@VIS, You do not have access to any End User

Hi all
I have configured and created EUL in 11.5.10.2 VISION instance on widows 2003,
When I tried to connect to Discoever4i on 11i VIS instance I am getting the following error :
Unable to connect to : eul4_us@VIS
You do not have access to any End User Layer tables
But I can connect to eul4_us@VIS via TOAD and SQL*PLUS Client, Also Discoverer Administration Edition can connect to eul4_us@VIS.
Also with the same Discoverer Release 4 Desktop Edition we can connect to the another VIS instance which is running on solaris 9, Only problem with the VIS at Windows2003,
Please Can any one give some solutions ASAP
Thanks
Divyanand

Hi,
In general, with an Apps mode EUL I would expect that you will get the the "You do not have access to any End User Layer tables" when you connect to desktop as the EUL owner. This is because the EUL owner does not have (and does not need) privileges to the Apps tables and functions. You should connect to Desktop as an Apps user.
Rod West

WCF-WebService count, accessed by the end user, the wcf-webservice published BizTalk orchestration as wcf-webservice.

Similar Messages

Maybe you are looking for