WCS 5.1.64.0 and Exclusion Area in planner mode

I'm noticing in WCS 5.1.64.0 that I can set a exclusion area, and the planner will put a AP in that area. Does planner not pay attention to exclusion areas?

Have you resynchronised the network plan with your location appliance or MSE after creating the inclusion zone. If you have and that doesn't work it may be worth unassigning the network plan from the Loc Ap, resynching with WCSand then assigning the network planback to the Loc ap and resynch.
Good look

Similar Messages

My wireless mouse and KB are in discovery mode, but I can't get past the "enter password" screen because my Mouse and KB will not work...batteries have been changed.

My Wireless KB and mouse are stuck in discovery mode, but I can't get past the "user password" screen because It won't allow me to enter characters.

Should work if you enter the code and hit the return key. Here is a step by step article.
http://support.apple.com/kb/HT1809?viewlocale=en_US
Captfred

What is difference between Shared ,Exclusive and Exclusive but not commulat

what is difference between Shared ,Exclusive and Exclusive but not commulative lock modes plese tell me

Lock objects are used to synchronize access to the same data by more than one program.
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
There are three types of lock modes
1.Exclusive
2.Shared
3.Exclusive not cummulative
Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
please go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm
briefly :
You can lock the table or record by using following types of locking:
1) Exclusive (E) the locked data can only be displayed or modified by single user i.e the owner of the object. Access to other users is denied.
2) Shared (S) several users can access the same record simultaneously, but only in display mode and except the first one, who has asked for the data in update mode.
3) Exclusive not cumulating (X) it is similar to exclusive lock. It allows only a single user access. E can be called several times from the same transaction. In contrast, a lock type X can be called only once during the transaction. Any other call for this lock is rejected.
Activation of Lock Object
1) When you activate the lock object, the functions are automatically generated. And these are ENQUEUE-EZN and DEQUEUE-EZN. EZN is name of the lock object.
2) While ENQUEUE is used in program to set the code over the selected data depending upon the lock object arguments. DEQUEUE is used to release the lock.
Thanks
Seshu

I need to erase free space on my hard drive. But when I am in disk utility the format and name are pale as is the erase free space button so I cannot erase free space.

My start up disk is full. I have been through my computer and erased a lot of music and video to free some space. I then went to disk utility to erase free space and find that the erase free space button is pale and therefore won't work. Nor can I select or deselect MacOS extended journaled.
Advice please?!

Recovering Disk Space
If you have less than 20% disk space then it is time to roll up your sleeves and search for what you can delete and what you can offload to another disk.
If you have less than 10 GB you definitely need to delete or offload some files or purchase a lager disk or SSD (see below). You may want to maintain at least 20 GB of free space so when your disk starts filling again it will have some room before it hits that 10 GB mark again. More headroom is better. If you let the space fall much below 9 GB you might not be able to boot your machine.
Initial easy steps to gain disk space:
- Delete all files in the Downloads folder.
Empty the Trash.
- Start iPhoto.
Empty its trash.
Restart.
- Restart in Safe Mode:
Restart the computer.
As soon as you hear the chime press and hold the right shift key.
Be patient. Hold it down until you see the Apple icon.
Empty the trash.
Restart in normal mode.
- Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the drop down menu.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
- Empty the Trash.
- Restart.
- Re-index your system disk (Macintosh HD):
http://support.apple.com/kb/ht2409
Time Machine Snapshots:
If your disk is 80% full that is normal. Time Machine uses up to 80% of the disk space for local snapshots. To get rid of these snapshots simply plug in your Time Machine backup drive and run a backup. See About Time Machine's 'local snapshots' on Mac notebooks: http://support.apple.com/kb/HT4878 and What are Local Snapshots? http://pondini.org/TM/30.html .
If you are concerned that the “Other” category of disk usage is taking too much space and for information on deleting files then look here: https://discussions.apple.com/docs/DOC-5142
Backup:
Run a Time Machine (or other) backup since you are about to delete and move files and you may need to recover from any inadvertent mistakes or decisions. You will need one external hard drive for your Time Machine (or other) backup and a second if you plan to offload some files. (See suggestions for where to purchase hard drives at the end of this message.)
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
Deleting files:
Then use the free application OmniDiskSweeper http://www.omnigroup.com/more to explore your volume in descending order by size so you can attack the problem from the top down, deleting the largest unwanted files first. Delete with caution and do not delete any system files. Remember to empty the trash after trashing the files.
Additional reference on freeing disk space:
http://pondini.org/OSX/DiskSpace.html
Offloading files:
Consider moving some of the no-often-used large files or directories to an external disk. Use ODS again to find them. As noted above this will be at least your second hard drive. Your first one(s) is/are for your Time Machine (or other) backup(s). Do not offload files onto a Time Machine disk.
Format the second drive as Mac OS Extended (journaled). Using OWS to find large files/folders and copy them from the system drive to the external hard drive and delete them from your internal drive.
Then  > System Preferences > Time Machine > Options… > Remove the offload HD name from the exclusions list.
Now both your system disk and your external offload disk will be backed up onto your Time Machine disk.
From: http://www.thexlab.com/faqs/freeingspace.html
To move your iTunes Music folder to another disk or partition:
To change the location of your iTunes Music folder, carefully follow the instructions in the AppleCare® Knowledge Base document "iTunes for Mac: Moving your iTunes Music folder."Additional information can be found in iTunes Help.
http://webcache.googleusercontent.com/search?q=cache:http://www.thexlab.com/105/ 00000849.html
Laptop users may want to consider having two iTunes libraries: a small library of current favorites on their computer, while their complete library resides on an external hard drive. Utilities like iTunes Library Manager enable you to easily have multiple iTunes libraries you can use with your account. https://www.macupdate.com/app/mac/7689/itunes-library-manager
To move your iPhoto Library folder to another disk or partition:
To move the iPhoto Library folder to a new location, employ the instructions in the AppleCare Knowledge Base document from http://support.apple.com/kb/PH2506 corresponding to the version of iPhoto you are using. Additional information can be found in iPhoto Help.
Laptop users may want to consider having two iPhoto libraries: a small library of current, favorite photographs on their computer, while their complete library, or archives of older photos are saved on an external hard drive. Utilities such as iPhoto Buddy and iPhoto Library Manager enable you to have multiple iPhoto libraries that you can use with your account.
https://www.macupdate.com/app/mac/12175/iphoto-buddy
https://www.macupdate.com/app/mac/7158/iphoto-library-manager
Hardware — Bigger disk/SSD:
If your system has upgradeable storage then if you are still tight on disk space consider larger storage. If you have a disk consider replacing it with a one TB disk. Check out a one terabyte HGST 7K1000 7200 rpm, SATA III drive from OWC http://eshop.macsales.com ($100). If you have an SSD consider increasing its capacity to 240 or 480 GB. A standard 240 GB SSD would cost from $200 to $280. See OWC and Crucial: http://www.crucial.com/ for options. OWC sells 120, 240 and 480 GB SSD upgrades for MacBook Airs. A 240 GB upgrade costs $265.   http://eshop.macsales.com/shop/SSD/OWC/ . If your Mac is under warranty or AppleCare replacing the SSD will void the warranty.
PlotinusVeritas gives some great suggestions for purchasing external hard drives in this thread:
https://discussions.apple.com/thread/5602141?tstart=0

Difference between Field symbols and work area for Internal tables

Hi,
In ECC versions we all know that we need to declare the internal tables without headerline, and for handling the internal tables we need to use exclusive work areas.
Currently i have an issue that we have been asked to use field symbols instead of work areas...can any one help me how to use the field symbols and also let me know how it will improve the performance of the program..
Thanks and Regards,
Kathir

Hi
DATA: WA TYPE ITAB.
LOOP AT ITAB INTO WA.
IF WA-FIELD = .....
ENDIF.
ENDLOOP.[(code]
FIELD-SYMBOLS <WA> TYPE ANY.
LOOP AT ITAB ASSIGNING <WA>.
ENDLOOP.
Now the problem is you can't know the name of the fields of the table at runtime, so you can't write:
IF <WA>-FIELD = .....
ENDIF.
Anyway you can create a field-symbols strcturated like the table:
[code]FIELD-SYMBOLS <WA> TYPE ITAB.
LOOP AT ITAB ASSIGNING <WA>.
IF <WA>-FIELD = .....
ENDIF.
ENDLOOP.
I don't know which are the differences for the performance between to use a field-symbol and to use a structure as work-area.
The differnce between the field-symbols and work-area is the field-symbol is assigned directly to the record, so u don't need to do a MODIFY statament to change something:
LOOP AT ITAB INTO WA.
WA-FIELD =
MODIFY ITAB FROM WA.
ENDLOOP.
LOOP AT ITAB ASSIGNING <WA>.
<WA>-FIELD =
ENDLOOP.
These two pieces of abap code do the same action, so probably the field-symbol improve the performance because it do an access directly to the record without to use an external structure as workarea.
Max

What is Plug-in, SUpport Package, Add in and how R3 and BW are interdep

Hello Every One,
Can some one explain me in simple words about the terms, Plug-ins, SUpport Packs, Service Packs, Add-in's, SAP Notes and how R3 and BW are interdependant in the above mentioned terms? Can anyone give a simple example?
regards,
kishore

Hi,
Plug-ins:[/b]
Additional program which enhances the functionality of an existing program. Additional functions which may not be needed or are mutually exclusive are often implemented as plug-ins.
For example ICMAN contains various plug-ins for the various network protocols which it supports (HTTP, SMTP, FTP,...).
The interface between mySAP.com components (for example, SAP APO, SAP BBP, SAP BW, SAP CRM) and one or more SAP R/3 systems.
The SAP R/3 Plug-In unites the plug-ins APO-CIF, CRM-R3A, BW-BCT and B2B-PRO-PI. This simplifies maintenance significantly and guarantees compatibility between the individual mySAP.com components. With SAP R/3 Plug-In, you can use several mySAP.com components simultaneously in a single system. SAP R/3 Plug-In supplies the mySAP.com component transaction data and master data in real time.
Technically, there are two versions of each release of the SAP R/3 Plug-In, a PI version and a PI-A version.
The technical names of the software components are PI and PI_A
SUpport Packs
A set of corrections for serious software errors in the SAP system.
Support Packages are compiled periodically and made available in the SAP Service Marketplace.
Service Packs
A grouping of different services for a quotation.
A service package can be agreed between a service provider and a customer within a service contract or as part of a complex service plan, which can also be additionally agreed in a service contract.
EXAMPLE
A "Winter Car Check" service package containing the following services is agreed in a contract:
Cooling water check
Brake fluid check
Battery inspection
Light inspection
Add-in's
add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software
http://help.sap.com/saphelp_erp2004/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
SAP Notes
Documentaion Prepared by SAP for publishing clarity in case of corrections or changes happening to the SAP Software.
R3 and BW are interdependant
Then BW takes the Data from R/3 : so there has to be Support Pluggins which are mapped to the BW server.So the SAP Supported R/3 Versions should be used.
Eg: SAP Stoped the Support for r/3 4.0 series
regards
Happy Tony

About material listing and exclusion?

Hi,
I set material Listing and Exclusion procedure to a order type, the exclusion procedure is work well, but the listing procedure do nothing, actually I really don't know what the listing means. is it possible to limit only a group customers can create this kind of sales order ?
Thanks,
Lance

hi,
basically there are two things will be maintained by the organisation.
1. listing and
2.exclusion.
listing means where the items/materials are listed- represents the material available in the company.
exclusion- where the items/materials removed from the company's list.- material is not available in the organisation.
but in standard SAP, if u r maintained the same material for listing and as well as the exclusion, it considers only exclusion. in that case, u have to go to VB02, and remove the material/items from the exclusion list, so that it item will determines in the sales order while u r creating.
plz. assign those listing/exclusion procedure to ur standard document types. and maintain the condition record thru VB01.
i hope the concept of listing/exclusion will make you understand after u read this above information.
reward points if it is useful.
regards
KR

TS1362 All of the movies I have rented or purchased from iTunes in the last 4 months fail to play properly. The audio and video are constantly out of sync. I have followed the iTunes suggestions to correct this, however nothing has worked. (Windows 8)

I am using a Dell inspiron 14z, with Windows 8, and before that a Dell with Windows XP. This is also happening on my iPad. For the last four months, none of the movies or television shows I have rented or purchased from iTunes have played properly. The audio and video are out of sync. I have tried the troubleshooting measures iTunes suggested, however nothing seems to work. I have read on the community that this has been a problem for users in the past, and have attempted to try some of the fixes individual users have suggested also. Again, nothing seems to work. At this point I am frustrated, as we purchase or rent almost exclusively from iTunes. I would appreciate a support-staff person response. Thank you so much.

this problem has been going on for windows users for over a year now.
Apple has no solution to this problem.

Lising and Exclusions

Hi can u please tell me what this is ...
Also setting and configuration for this...
I understand that there are some access sequences invlolved. Please let me know the Tcodes involved.
Regards
Guest

hi,
Material Listing and Exclusion
Material Listing & Exclusion lets you control which materials specific customer may or may not buy. Exclusion is given preference over listing. The system will check the listing or exclusion for the sold to party first and if it finds, then no other check takes place, other wise it checks for payers listing & exclusion.
SPRO- IMG- SD- Basic Functions- Material Listing/Exclusion
Maintain Condition Table: select Customer & Material from the field catalog
Maintain Access Sequence: go to new entries, give 4-digit code. Select the 4-digit code and go to accesses and assign cond table to access sequence. Select access line item and go to fields and save.
Maintain Listing/Exclusion Condition Types:
Copy A001: for Listing, rename with descp
Copy B001: for Exclusion, rename with descp
Assign access sequence to the conditon type. Also mention valid from & to dates.
Procedure for maintaining Listing/Exclusion: go to new entry. Give 6-digit code and descp. Select the 6-digit code and go to control data and assign cond type.
Activate Listing/Exclusion by sales document type: Det Rule
Maintain Conditon Records: VB01. Maintain Customer, From, To, Material(s).
Also i request you to close all your previous threads. I hope many of them are already answered, so please do reward all helpful contributions. Its a good way to go forward
regards
sadhu kishore

HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

TS1741 my iPhone and iPod are no longer being seen by iTunes on my computer. Everything is up to date.

my iPhone and iPod are no longer being seen by iTunes. All software is up to date. I have tried following the fixes suggested by the support on iTunes, to no avail. my computer said that my iPhone 5 is "older" and that usb2 is not compatible with usb3 on my computer. it worked until a week ago. can someone help?

See TS1538: iOS: Device not recognized in iTunes for Windows.
tt2

Probably asked and answered a million times but my laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his! Is there a way to get them off and how do i prevent this from happening again?

probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i prevent this from happening again? can someone direct me to some info on multiple phones on one itunes i am lost.

Hey there 79usma79!
I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
Thanks for using the Apple Support Communities!
Cheers,
Braden

HT3819 how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

Logical systems assignment when SRM and ECC are on 2 different servers

Hi SRM guru's,
What is the standard practice for Logical system creation and assignment when ECC and SRM are on 2 different servers.
I could not able to find which i created a logical system in SRM server which i created in ECC
Same for the ECC also.
how do i assign logical system of SRM to ECC
vice versa.
your prompt response is appreciated.
Regards

Hi Sai,
Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
Logical System : <SID>CLNT<Client Number>
For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
You can refer the below document which eplains the creation of logical system and RFC destinations etc
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
Note: Only while configuring the RFC Destination, the servers will play a crucial role.
Regards
Kathirvel

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

WCS 5.1.64.0 and Exclusion Area in planner mode

Similar Messages

Maybe you are looking for