WCS Administration = Settings = Server Settings FTP/TFTP??

Hi everyone
I'm just configure a new WCS (7.0) system with two WLC.
Everything is working fine but I have one thing I'm not sure about the
"Server Settings" under Administration => Settings.
I can enable or disable FTP, TFTP, HTTP and HTTPS but I don't know
what happens if I disable these settings.
Has anybody some experience with that?
Thanks
Regards,
Pascal

John....
This is per Cisco:
Set Up NTP on the WCS
The WCS relies on Windows or Linux for the correct time. The WCS checks the Windows Operating System or the Linux Operating System once every 24 hours for the system time. Therefore, it does not immediately know about system time changes unless you stop and restart the WCS server. Right-click on the clock and select Adjust Date/Time. Use an NTP time source to set the clock and manually set the offset for your time zone. This is typically already set.

Similar Messages

Changed FTP - "contribute cannot remove the administrative settings"

We developed a major site at a temporary subdomain on our server. Then, we changed that subdomain (to replace an old version of the site with this new version).
I created a new FTP account for this new location. (The files are at the same place on the server, but under a new http:// location) This FTP account works fine with other FTP client software.
When I try to create a new Contribute connection (using CS4), it notices the site has moved and asks whether I want to remove the administrative settings. I say "yes." When I do, the error message I keep getting is "contribute cannot remove the administrative settings."
I double checked file permissions for all the files within the /_mm subdirectory. They were set at 644 (for files), so I changed them to all to 664 to include access by the new username.
Any ideas as to why Contribute can't "clear the slate?" And is there some way to force this, even erasing files manually?
Best,
Greg

Hi,
     Can you change the ownership of the files and folders in the _MM folder and also that of _MM folder, to the new FTP user, and then try removing the administration settings?
     Also, I wanted to ask, does the new FTP user belongs to the same user group as that of the old user, if not, try adding the new FTP user to the same group and then try removing the administration.
     Hope this helps.

Where are role and administrator settings saved?

We have had issues in the past that have caused us to have to
re-setup our site, including all administrative settings and all
roles and users. Surely all of this is saved somewhere. If we just
knew where, we could backup the info for an easier restore if
further problems ensue.
Anyone know how to backup site settings?

I got the following reply on a separate forum:
quote:
For a website that has been administered by Contribute
(Publishing server is not enabled), you would find an _mm folder in
the website root on the remove server. This is a contribute
specific folder and it contains the administrative settings, role
information and users.
For CPS managed sites, the _mm folder still holds the
information about the administrative settings and role information.
The user information of the sites are stored in the Database folder
of CPS. The Database folder can be found in the following location,
<CPS Install Path>\Database.

Contribute needs to remove the administrative settings

Starting today, I lost my administrative connection to my website. When I try to connect again, I get these messages:
The administrative settings for ... are invalid. To continue connecting to the website, Contribute needs to remove the administrative settings, including users and roles. Are you sure you want to continue?
I have never seen this message before. How can I reconnect to my website without having Contribute remove my adminstrative settings? Or is there a way to save my settings and restore later?

This happens because you have moved to site to new host, the host name and the IP address will differ from the one saved in the cthubxxxxx.csi file inside _mm folder in the site. Or the IP address is not static and got changed.
Solution 1: Click Yes (All the adminitrative settings will be removed). And Administer the site again, create new roles and configure the role settings accordingly.
Solution 2: If you have access to the server, Open the cthubxxxxx.csi file inside _mm folder of your site and replace the old hostname and IP address with newer one. Then reconnect.
Hope this solves your problem.

To continue connecting to your website, you must repair or remove its administrative settings

Hello.
When trying to connect to my website, I'm getting a prompt saying the files appear to have been recently moved.....yadayada. I realise it's like this since we have changed to a new host since I see our old one there correct? OK-so my question is what happens after I click that button that says to remove the administrative settings for your website and continue connecting?
I've been told to update our website and I don't have a whole lot of knowledge about it. I do connect to it at work through ftp for uploading pix and access to cpanel but that's about it.
The person that did the site no longer works with me, but I know that he used Contribute3 (Macromedia) for at least some of the site, so I'm assuming the new Contribute will work.
I really don't want to screw things up clicking that button and somehow mess up our site.
Thanks for the help!
Jim

Thanks very much Dominic:
I was able to open that cthubxxxxx.csi file in text editor and I assume I just put in http://www.liquidweb.com (in place of our old host in at least 3 spots) since they are our new host? As far as the IP addres goes, where do I get that or find it? Is it the IP address for the host (liquidweb)? I assume I call them for this information?
Just one other question:
I noticed on the cthubxxxxx.csi file it says macromedia_dreamweaver_hub. I assume that means the site was made with dreamweaver? I assume I will be able to edit with Contribute?
Thanks again for your help-
Jim

Cannot enable webscan in administration settings

I want to use webscan to scan from my HP printer to a Chromebox.
I cannot find the enable button for the webscan feature anywhere in my administrator settings on the printer's web interface.
Can someone tell me where I might find it. I've read through many forum threads and watched Youtube videos of people doing it easily but for some reason I cannot find it on my own.
Thanks!

f you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Encrypting 90MB file-any administration settings to handle 90MB file

Hi All
I have to encrypt a 90MB file.
Iam using zip module onsender side and unzip on reciever side and then encryption module. Load on integration engine is reduced, but there is a huge load on adapter engine. Is it possible to handle this situation by changing any administration settings. iF not how to proceed with my problem.
It is very much urgent .
plssssss help me out

Hi All
I'll exlain my scenario once again.It is file to file.
I have a flat file of 90MB. I need to encrypt and send.
Problem is not with spliting the message.
If I split the message on the sender side then i need to append each encrypted message on the reciever side.
So i cant split the message on the sender side.
Iam using Zip/unzip module like this. zip on sender side and unzip then encryption on the reciever side.But adapter engine is not able to take that much load for encrypting.
Please help me out

Problems in verifying connection to CF Administrator Mail Server

I need to send e-mails using CFMAIL, but am unable to verify the connection to the CF Administrator Mail Server, which presently is localhost.
This question has been asked in other places, but I have checked the remedies suggested there (firewall blocking, etc) to no avail.
I am using Server Port 25 and have tried enabling both TLS and SSL.
There are no basic Server issues, since I get the message "Server has been updated successfully" upon re-entering the Server Settings data.
Thanks in advance for comments.

Are you saying that you have an SMTP server running on your localhost? That would be unusual. Even if you do, the real SMTP server would have to allow relaying to allow your local SMTP server to get mail through it. If you don't have an SMTP server running on your localhost machine, then you need to specify the name/IP of the SMTP server on the CFADMIN MAIL screen.
-reed

Giving someone access to my server thru ftp

Hey there,
I need to give someone outside my office a link with a password to be able to upload files to our server I don't know how to do it can anyone help...
we're using leopard server and I'm not sure what else anyone needs to help me with this problem
any help will be appreciate it!
~D

Hi,
To allow access to your server via FTP:
1. Select your server in the list in Server Admin.
2. Click Settings, then click the Services tab.
3. Make sure FTP is checked on the list.
4. Now click the little arrow next to your server on the list of servers to your left.
5. Click FTP, then click Settings, then goto the General tab.
6. Check Enable anonymous access if you don't want your clients to enter a username or password.
7. Goto the Advanced tab.
8. Make sure Authenticated Users See: is set to FTP Root with Share Points.
9. If you want to put your FTP files in a folder other than /Library/FTPServer/FTPRoot, change FTP Root.
10. Make sure you save your settings by clicking the Save button in the lower right-hand corner.
11. Select FTP under your server in the list of servers to your left, then goto the Server Menu > Start or Stop Service.
12. If you have an AirPort or AirPort or AirPort Extreme Base Station goto step 12A, if you have a non-apple router goto step 12B
12A. Start Server Preferences (Applications > Server > Server Preferences), then click Security. Make sure security is on. If it is not, turn it on and enter your AirPort password when prompted. Click add ( + ). Select Other under Add Service. Name it FTP and enter 21 under Port. Click Add. Exit Server Preferences and Restart the AirPort if prompted.
12B. Since there are too many router brands and models to fit into this post, it might be a good idea to google how to forward ports on your specific brand of router. Start Safari and goto 192.168.0.1, 192.168.1.1, or 192.168.2.1 (which ever one works). Enter your username and password when prompted. If you do not know, ask your network admin or try admin as username and no password or admin as the password. Goto Port Forwarding, Virtual Servers, or something similar. Add a new port or entry. Name it FTP, select it's type as TCP&UDP (or if that isn't available, add two separate entries: one TCP and the other UDP), and the port(s) as 21.
13. Go to whatismyipaddress.com and write down the IP address it gives you. This is what your clients will type in to access your server. (Note that this IP address changes every couple of days, so repeat this step every so often)
14. To connect to your FTP server, go to the Go menu in Finder > Connect To Server. Enter ftp://youripaddress (replace youripaddress with the one you wrote down) and click Connect. / should mount on the desktop, and you should be able to access the server.
15. If you have any problems getting clients to connect, you may need to forward the port 21 on the router they are behind.
Glad I could help,
Ian

Ssh, telnet, ftp & tftp services stop working

I have a new SunV245 running Solaris 9 that when I start the server up everything works good, but after 8-12 hours the network type services quit working (ssh, telnet, ftp, & tftp) however I can still ping the interfaces so the network is there. I reboot and everything starts working again. Has anyone seen this before? Is there some kind of power save option that could be shutting the inetd type services down?

Cat and Maximo,
> Let me try to get that straight. Your BM does static NAT for your
> mailserver (and other boxes), and suddenly UDP and ICMP from these
> natted servers through the BM still works, but TCP doesn't?
Yes. That's what it looks like.
> Can you still do TCP *to* the BM from the natted devices when that
> happens? As you say your proxy continues to work, it sounds as if TCP in
> general on the server continues to work, but does it also work from the
> mailserver?
Everyone browsing via BM proxy continues with no interuption.
The mail server can telnet to any other server on the internal LAN but
nothing past BM. DNS continues working for the mail server too.
> If really nothing changed, this might be a (succesful) DOS attack of
> some sort. I wonder if a LAN trace could reveal anything of interest.
Do you mean port scan the BM server?
I know that "nothing has changed" is a loaded statement. The only thing
(that I know of) that has changed relatively recently is the addition of
the Squid server. It has been running behind the BM server for about 3
weeks. Recently I added a filter exception allowing the Squid server to
access higher ports (dyn/tcp).
But, as I noted before, I think removing ipflt should eliminate any
doubts there. Is there some way Squid could be corrupting something there?
The problem was compounded this morning (saturday). I came in today so I
would have the network essentially to myself. But, to my surprise,
everything was ok.
Cat, You're right. This server is no spring chicken. It is an IBM
Netfinity 3000. Its probably 3 or 4 years old (maybe more). I will think
about this as a hardware problem but I just wish the thing would die
altogether and get it over with. :o)
Thanks,
Brian

How can I create a directory on my server using FTP in applescript?

Hi
I have created a script which successfully uploads files to my server using FTP and a curl command.
The one thing I haven't worked out how to do is how to create a directory on my server using applescript. At the moment I have to manually create the correct directory for the script to work, but would like to be able to automate everything.
Would this be possible?
Thanks
Nick

Thanks Bernard.
I have tried that and still get the error message:
"curl: Can't open '--ftp-create-dirs'!
curl: try 'curl --help' or 'curl --manual' for more information
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0
curl: (9) Server denied you to change to the given directory"
The other relevant parts of the script are:
set ftp_url to "ftp.****.org.uk/artists/" & artistName2 & "/assets/"
set ftp_username to "*****@*****.org.uk"
set ftp_password to "****"
set ftp_entire to ftp_username & ":" & ftp_password & " ftp://" & ftp_url
set outPath to outputFolder & fileCounter & ".jpg"
and then...
do shell script ("curl -T --ftp-create-dirs " & outPath & " -u " & ftp_entire)
Like I said, all works fine when the directories are already in place. I have permissions for the artists folder set to "777", i.e. writable. Because the script is trying to create two directories at once, i.e. "artistName2" and then "assets" under it, I wondered if this was significant, but then I tried with just one new directory, and still got the error.

Web host, mail server and FTP.

Dear all:
I have some questions and will try to make my post a short one (although the questions aren't exactly simple). I have the need to set up my own web server, e-mail server and FTP server. It is my understanding (and I remember setting another computer I had 2 or 3 years ago this way) that OS X can be used for this without the need to have OS X server installed. I don't need (at least not for the for the immediate future) to have a server for my own local network. Basically all I need is a single computer where (1) I can host multiple web sites, (2) I can host my own e-mail that will correspond in number to the number of web sites (domain names) being hosted and (3) I can set-up as a FTP server so that my clients can log on and download files.
I have used VirtualHostX for virtual hosting as well as PureFTD Manager with good results in the past. I've also found both to be easy to use, with a good and intuitive GUI which is essential for someone with as little knowledge as I have of networking. My question now as to do with e-mail and how to set-up Mac OS X to work as an e-mail server.
Are there any applications you would suggest that would be simple to use, have a simple and intuitive user interface and also provide mailing list services along with e-mail services that you would recommend ? I've looked at a few but most of the ones I have found seem to require command line input and this is something I am not comfortable with. I need an application with a simple interface and allows things to be set-up in a straight forward manner (and preferably free instead of paid).
What would be your recommendations for this project ? Any recommendations, advice and suggestions you can offer will be very appreciated.
Thank you in advance,
Joseph

Perhaps you should give people more time to answer.
1. You do not need a DNS on your server, ask the ISP to set up the MX record as they set up the A record.
2. Not really enough information in your setup to say either way, but as it takes seconds to do and you have everything else needed - set it up anyway.
3. Domain name: mydomain.com, Host name depends what you call it. If you don't have a name why not mail.mydomain.com and make you mx record point to that name. Perhaps that is what your A record is already.

Sending XML file from SAP to Windows Based file server with FTP function

Hi Gurus,
We are using SAP BW 3.0B version.
I need to convert data in ODS to XML format and send this XML file to remote server which is not a SAP application server, it is just a Window Based file server with FTP function..
By writing some ABAP code I have converted ODS data into XML format (which gets saved in my local system)
(Is that I need to put this file in Application Server to send it to the other servers? )
Now the thing is how I can send this file to that Windows Based file server.
plz suggest me.... what can be done......
Thanks in Advance
Madhusudhan
Edited by: Madhusudhan Raju on Dec 3, 2009 4:25 AM

I dont think the above code support windows OS. Because I always execute this script via UNIX.
I think you can try this option, go to command prompt, goto the destination path where you have an XML file using cd....
ftp (destination servername), specify the username and password.
afterthat, use the command put and filename.
check whether the file had reached destination successfully or not.
For automation purpose, you can use the following script like
ftp: -s: test.txt (servername)
In test.txt,
UserName
Password
bin
cd /files
put file.xml
bye
Also, you can check in SM69, there will be some SAP external commands to automate the file transfer.
Thanks
Sat
http://support.microsoft.com/?kbid=96269

Cisco CSM and WCS on same server

Hi,
Currently we are running Cisco CSM and Cisco WCS applications on different servers.
Please let me know can it possible to install Cisco CSM and Cisco WCS on one server.
Regards,

As per their datasheet, both CSM and WCS support VMware or can run as virtual servers. So it should be possible to implement both as virtual servers and run on the same physical server.

I can't connect to Windows Server via FTP

I've been using FTP for about 13 years and it works fine on Apache servers but can't connect to a windows Server via my Fetch FTP program. The site owner sent me a screenshot and copied/pasted the password so I know I have the info correct. It is still giving me errors.
Is there a special method to connect to Windows server via FTP?

Hi Lorel,
Try FileZilla...
https://filezilla-project.org/

WCS Administration = Settings = Server Settings FTP/TFTP??

Similar Messages

Maybe you are looking for