WCS and WLC versions for Cisco 3600 WAP

Hi,
I got a few Cisco Aironet 3602i. The minimum WLC version to support these is 7.1.91.0. I am planning to upgrade to 7.2.103.0. The minimum WCS version to support these WAP is 7.0.220.0 and the next available 7.0.230.0. Checking the release notes for both of these WCS versions, there is no mention of support for WLC versions listed above.
http://www.cisco.com/en/US/docs/wireless/wcs/release/notes/WCS_RN7_0_230.html#wp152663
Am I missing something here ? What versions would be required on WCS and WLC to make all the three entities (WLC, WCS, WAP) inter-operable ?
Thanks,
Regards, Rashid.

Thanks Scott.
Table-5 from your link indicates WCS 7.0.230.0 support for WLC 7.1.91.0, although release notes for WCS fails to mention this. I think thats the only option in the our existing WCS based network then. Other option being to upgrade to NCS.
The NCS page http://www.cisco.com/en/US/products/ps6305/index.html indicates it will be offered to existing WCS customers when releases. Would we be required to pay for the product or both product and licenses or none ?

Similar Messages

VMware tools and hardware version for Cisco vWLC

I am currently running a Cisco vWLC (v8.0.100.0) on VMware vSphere 5.5U2 supporting about 20 APs. I just recently upgraded to vSphere 5.5U2 and I was working my way through updating the VMware tools and VM Versions on all my VMs when I glanced at this info for the vWLC. The vWLC shows a VM version of 1 with the VMware tools not running and not installed. I am curious if it is necessary or even possible to update the VMware tools and VM version for the vWLC. The vWLC is working perfectly fine and I have no issue with leaving well enough alone, but this just kind of peeked my curiosity as I really couldn't find any concrete answers in any online documentation. Does anyone have any insight on this matter?

If it's working, then leave it alone. Some of the Cisco virtual, well maybe most, don't support the VMWARE tools. Updating the version to the latest will make you have to use vCenter as the sphere client will not allow you to edit the VM anymore.
-Scott

Location Appliance 2700 - is it supported with v7 WCS and WLC?

The compatibility matrix shows no support for a Location Appliance 2700 for any version 7.0.x.x for WCS and WLC. However, I did see a thread here where a v6.0.x.0 had compatibility. v6.0.202.0 is MD. Is it compatible with v7 WCS and WLC?
Can any of the experts please comment? Thank you.

Hi,
here is the link that will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/controller/4400/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp78062
Please dont forget to rate the usefull posts!!
Regards
Surendra

WCS and WLC AP values not fully in sync.

I have recently added several new aps on my network,after they connect to the controller, I set a hostname, and change the ip address to a static. However, WCS still sees the aps by the old ip and host name despite going into each one, hitting audit, and then save, any way to fix this? Thanks.

You may want to also consider the following:
1) Both the WCS and the WLC need to be at the same major revs (i.e.: The if the WCS is at v4.2, then the WLC should also be at 4.2). Failure to do so results in some significantly bizarre behavior such as errors after an audit - at least that was my experience.
2) You may have better success if you make the change from the WCS which pushes the change to the WLC and that way the WCS is already aware of the change. (Normally, this should work - I know of one instance where it does not: changing Master Controller Mode from the WCS).
3) If you feel strongly about making the change in the WLC (and are running a newer version of code in the WCS/WLC - i.e.: 4.x), there is a setting that forces the WLC to send configuration changes to the WCS once APPLY and "Save Configuration" are clicked:
From the *WCS*, click on Configure->Controllers and click on the controller you wish to change, and check the "Refresh on Save Config Trap" check box and click OK.
This will cause the controller to push any configuration changes up to the WCS after an APPLY and "Save Configuration" are clicked.
4) In terms of getting the WCS to actually synch up with the controller (assuming the WCS and WLC are at the same rev. levels), you may need to do what I did (this was subsequent to upgrading to v4.2 in both the WLC and WCS and having chronic "mismatch" status between the WCS and WLC):
From the WCS:
Configure->Controllers, check the controllers you wish to synch up. From the dropdown, select "refresh config from controller"
Next, select the DELETE option (instead of the RETAIN option). I believe that there are bugs in the software that upgrades earlier revisions to 4.2. I know that it might seem undesirable to DELETE information in the WCS, however, if you choose "DELETE", it seems to get rid of the residual information from the previous revisions that did not upgrade properly and the WCS will now be in synch with the controllers. DELETING the other settings makes the audit errors go away.
Subsequent audits may go better for you after performing the step shown above. However, you may need to repeat this process in item 4 above once or twice more until the database gets cleaned up, but after that my own experience has been that the WCS and WLC will eventually stay in synch.
It is unfortunate that we are forced to come up with workarounds like these when the software should clearly be able to handle this on its own, but we do what we must to get the job done.
Hope this helps,
- John
(Please rate helpful posts)

Rogue AP - Not in sync with WCS and WLC

WCS - 7.0.164.0 and WLC - 7.0.98.0.
For some reason, I am seeing rogue ap alert on WLC and am not seeing on WCS. How do I clean up database and sync with WCS and WLC.
I am seeing same thing with coverage holes.
- Allen -

Allen,
On the WLC go to Management > SNMP > Trap Controls, make sure that you have the traps checked.
HTH,
Steve
*Please remember to rate helpful posts*

WCS and WLC WLAN Config not fully in sync

Hi,
We're facing the issue WCS and WLC WLAN Config is not fully in sync. WLC showing server 1 is IP:10.160.22.151, Port:1812 but WCS server showing none even after click on “Audit” button. Any idea how to resolve this issue? Is this causing any wireless problem? Attached is screen captured. Thanks for your help.

You mentioned "audit". Have you done a WCS audit so the WLC and WCS are in SYNC?
If you make a change on the WLC you will not see it in WCS UNLESS they are SYNC. You will see the term "mismatch".
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

WCS and WLC syncing

Gday again,
I am converting standalone cisco1231AP to LWAPP. In the process, the conversion is always successfull. Run the audit on WCS, refresh values from Controller and restore values from Controller... The process after that involves us running few lightweight templates. Now, with the newly converted AP, I used to be able to see thm on both WCS and WLC. However, I dont see the new APs in WLC anymore. Besides checking the SNMP settings for sync, what else should I check?
Regards,

are the APs registered to the WLC? whats the software running on the WLC and WCS??

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

Need latest SLD and NWDI version for PI 7.1 EHP1

Can any one update me the latest SLD and NWDI version for PI 7.1 EHP1?
Kindly provide me the path of implementation guides for SLD, NWDI which can be used with PI 7.1 EHP1. For PI 7.1 EHP1, can we use the same version of SLD and NWDI which used IN PI 7.1?
Please help me for the above questions.
Regards,
Yuvaraj.

Hi Yuvaraj,
Please check the NWDI Development Infrastructure 7.11 and SLD 7.11 for the PI 7.1 EHP1.
Go to Service Market Place - Software Download > Support Packages and Patches > Support Packages and Patches - Entry by Application Group > SAP NetWeaver and complementary products > SAP NETWEAVER PI > SAP EHP1 FOR SAP NW PI 7.1 >Entry by Component > Development Infrastructure.
Hope it will helps
Regards
Arun Jaiswal

Which axi version is the supported and compatible version for JDK1.4?

Hi,
Can any body tell me Which axi version is the supported and compatible version for JDK1.4.Thanks in advance.
Regards,
Lokesh Kumar Pattajoshi

Hi Jürgen
Please be advised that the customer is correct.
Please see the following note:
539188 TREX installations for E-Selling
For all E-Commerce and ICSS scenarios using
SAP Web Application Server Java 6.40 TREX 6.1. is recommended.
Hope this will be of assistance.
Kind regards Peter
Edited by: Peter Murphy on Jan 23, 2009 3:01 PM

Recommended IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch

Could someone confirm IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch please.
It already has 03.06.00.E on it. I am planning to configure VSS on it with similar switch.
VSS will participate in various Etherchannels (MES).
Just wondering if there are any known bugs in this IOS XE release.

Use the Bug Search Tool to look for issues with vss, vsl, etc.
https://tools.cisco.com/bugsearch/

HT4095 2 Some movies may not be available from iTunes in the Cloud. These movies, if purchased in HD, will download both the HD and SD versions for you to sync to your compatible iPod and iOS devices. Previous purchases may be unavailable if they have bee

2 Some movies may not be available from iTunes in the Cloud. These movies, if purchased in HD, will download both the HD and SD versions for you to sync to your compatible iPod and iOS devices. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.

Do you have a question ? Not all content is available for re-downloading e.g. if the content provider (or Apple) removes them from the store, and there are also some film studios (in countries where film re-downlaoding is possible) who haven't agreed to allow their films to be re-downloaded.
Otherwise, re-downloading : http://support.apple.com/kb/HT2519

What is the major differences between 6.5 and 11 version for essabes?

Hi all,
Can anyone list me out the differences between essabase 6.4 and 11 version for essabe?
Thanks
hari

ASO
If you want differences, have a a look at overview tool which will tell you the difference from 9.3 onwards :- https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1
Otherwise check the documentation for the new feature sections :- https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1
Cheers
John
http://john-goodwin.blogspot.com/

FUS Image version for Cisco 3702 AP

Dear Team,
What is the minimum version of Field Recovery image in WLC for Cisco 3702 series ..?
I have 6.0.182.0 version.. Is that supported..?
Note: I already upgraded WLC code to 7.6.120.0.

We recommend that you install Release 1.9.0.0 of Cisco Wireless LAN Controller Field Upgrade Software (FUS), which is a special AES package that contains several system-related component upgrades. These include the bootloader, field recovery image, and FPGA/MCU firmware. Installing the FUS image requires special attention because it installs some critical firmware. The FUS image is independent of the runtime image. For more information, see http://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html .
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn76mr02.html

WCS and WLC, On the same VLAN ?

Whats best practice ? Is it better to have the WCS on the same vlan as the controller(s)
Johann Folkestad

Given the fact that it is snmp traffic, the WCS to WLC snmp read/writes should be confined to a subnet(s) that are secured by ACLs/firewalls/rfc1918 address space, yada yada....
One way to do it is to place the WCS behind a firewall on the same or reachable subnet as the WLC service or management ports. I prefer using the service port on the WLC for the WCS snmp traffic, this way I can prune that vlan off the switch trunk ports that the WLC connect to as well as put it in a subnet that is away from prying eyes. I have had it working just fine since 3.0.2x all the way up to the latest rev this way.
the controller will touch an additional vlan for each dynamic interface you create for wlans
You can also dual home the WCS server, but the default option on WCS install/upgrade is to bind to one interface (it will detect & prompt in regards to multiple interfaces - at least on the Linux version).
Also don't forget to lock down https access to WCS web frontend as well

WCS and WLC versions for Cisco 3600 WAP

Similar Messages

Maybe you are looking for