WCS - Antenna Detection Issue

Hi,
I'm installing a WCS solution with 3 controllers 5508 and 70 access points. (AIR-LAP1041N-E-K9)
Everything is working fine but i have 1 issue with WCS and RF.
When i add some Access Points into the maps, some are working fine but others not.
I've got this message :
"RF Prediction will not be computed for the following APs since these APs have Unsupported (Other) Antennas. Are you sure you want to continue?
PNO_N0_22(802.11b/g/n), PNO_N0_24(802.11b/g/n)"
PNO_N0_22 et PNO_N0_24 are my access points's name.
Below you can see that internal antenna is well detected on some AP but not for all.
Does anyone have any other suggestions or overcome the same issue?
Thank you

Wow i just solved it ...
For information I created a template for my Lightweighted AP and there is a field to force antenna type.
I choosed my Antenna-1040-2,4Ghz and everything is now working

Similar Messages

  • CS3 automated gallery - Flash  Player 10 detection issue

    I have been searching for answers to this and found nothing. Anyone know how to solve the FP 10 detection issue with the PS CS3 automated flash galleries. Right now it will not detect FP 10 and thinks there is no player. I know there are changes to detection methods but, I'm not much of a programmer and I've tried to implement SWFObject but, no luck. Any enlightenment would be appreciated. Save me re-creating please! I'd rather not have to upgrade my software.

    Hi,
    I am having the same problem... did you have any luck fixing this issue?
    Any help would be awesome.
    Thanks.

  • Adobe cs6: extracting files, installer detects issues. Using Photoshop, the program crashes quickly.

    I'm in the process of downloading Adobe cs6, and when I extract the downloaded files, installer detects a machine restart is pending, but even after restarting the computer, and retrying to extract the files the issue persists. So I tried ignoring the problem, (as that is one of the options) and completing the download, but then when I go ahead and use Photoshop, I only get to use it for less than 20 seconds and the program completely shuts down. I have no clue how to fix this problem.
    I've tried unistalling Adobe cs6 and reistalling it multiple times, but no luck.
    I've also downloaded the update published by adobe today (11/26/2012) but i still have this problem.
    I don't know how to solve this issue, doesn anyone have any suggestions as how to fix it?
    i'm using windows 7, and AMD Professional firepro graphics card
    Thanks Stef

    Hi Stef. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop.  I'm moving your question to the Downloading, Installing, Setting Up forum for specialized attention to your situation.

  • Wcs license upgrade issue

    Dear all,
    We have two 4400 controllers which support 50 Access points each and wcs with 100 base license.Now we added 5508 controller supports 50 access points.wcs is upgraded with another 50 ap license.The 5508 controller is joined to wcs and the licence showing permanent.WCS showing all aps and showing both 100 and 50 licence as permanent.
    But the issue is while loging into the wcs it showing the error message as"The system is in violation of license.The number of APs registered is greater then licensed."
    What might be the reason.Please help me.
    Attaching the screen shot.
    Thanks in Advance
    Bose.

    Because your WCS is still licensed for 100 APs ....
    There are 2 license level : Base and PLUS.
    You had a 100 AP Base license.
    You bought a PLUS_UPG license which upgrade 50 out of your 100 AP count to PLUS.
    Result : you now have 100 AP licensed on WCS, out of which 50 have the "PLUS" feature set.
    You should have ordered a "BASE ap count 50" license. or if you want to go to plus, a "plus_UPG" license but for the 100, and then a plus ap count 50.

  • IPhone detection issue with win 8.1

    Soon after installing 8.1 Preview, the ITunes is not detecting my iPhone 5. someone advised to remove and reinstall iTunes. So I did that and iPhone was detected but when I powered off my computer and then try to connect I have the same issue.
    Any tip why is this happening ?

    Thanks gdgmacguy, I thought maybe Windows 8.1 Preview was a beta but wasn't sure.  A previous discussion thread (https://discussions.apple.com/thread/5156214?start=0&tstart=0) recommended installing Flash Player and Java for a couple of issues. 

  • Ram detection issue

    Hi all,
    I hope it's not a critical issue, but I've just decided to change my RAM in my iMac intel Core Duo 2Ghz from January 2006 from 2x512M 667 PC5300 by 2x1G 800 PC6400.
    The system is working fine but the system detects the RAM as 2x1G not at 667Mhz but at 533 !!
    Do you have any idea about this or is it normal?
    Thank you in advance for your answers.

    Hi Toofy
    Welcome to Apple Discussions!
    I'm not sure why the bus would slow down to 533MHz, but I am sure that is not the correct ram for your iMac! At any moment you could have everything from Kernel panics to your iMac won't boot.
    http://docs.info.apple.com/article.html?artnum=303085
    You need to exchange the PC2-6400, or order PC2-5300 to get the proper performance out of your iMac.
    Dennis

  • WRT54G XBOX360 and MacBook Pro detection issues

    I have been having some issues detecting my Linksys WRT56G wireless router from my MacBook Pro and an Xbox 360 that is using a Linksys wireless gaming adapter. I haven't had this issue before until I taken it to my friends house on the weekend so I can browse/play wirelessly (my friend doesn't have a Wireless router) and when I installed it back into my house, this issue occurs. My MacBook Pro was able to detect my wireless connection and was able to browse the internet but after a few hours I abruptly disconnect and I can no longer find my wireless connection. The only time I can make this work is by resetting my router every time I cannot find my wireless connection. My Xbox 360 does the same thing but it even gets worse when the XBOX360 and my MacBook Pro are using wireless connection -- we only stay connected for only a few minutes.This is what I have done so far:
    1) Restarted computer, reset Linksys WRT56G, reset DSL modem, reset Linksys Wireless Gaming Adapter, DHCP renew/release.
    2) Installed the latest firmware using Linksys Upgrade and EasyLink.
    3) Reset Linksys WRT56G everytime I get disconnected and can no longer find a wireless connection.
    Please I really need help. I have had this issue for a week and I am so frustrated. Thank you so much and I really appreciate your help.
    Message Edited by aeroform on 09-04-2008 10:57 PM

    Ok, my MacBook Pro and XBOX360 can no longer detect my wireless connection. Even after several resets...

  • 'Different SIM Detected' Issue on outright iphone

    Hi,
    I've bought my iphone outright many months back. Currently I'm on a overseas trip at a place with very limited internet. When I try to insert a local SIM, iphone says different SIM detected, and asks to connect to itunes. However, when I connect it to itunes, it tries to log on to apple store, and since there is no internet, it fails and thus stops verification. I think verification is unnecessary as I bought the phone outright, and it should work with any SIM anywhere in the world out of the box!
    So, I've found my $800 iphone useless if i take it out of the country of purchase. Do you guys have any idea how to resolve this issue? With limited time on hand, and since I'm in a new country, I wouldn't be able to visit an apple store or a apple reseller. I do understand that all will be fine once I'm back from my trip, but I find this so annoying. I will appreciate any help.
    Thanks a lot in advance.

    It is a serious reply, that's what it took to fix it.
    If you run a backup of your phone before you restore it you won't loose anything.
    You'll just have to wait while iTunes re-syncs all your Music / Photos / Movies / Apps which can take some time depending on how many you have.
    You'll still have all your SMS messages and Contacts though just fine.
    Restore was the only option for me. Once the Official carrier unlock (from O2) came through from Apple on iTunes the phone was asking for iTunes when it changed SIM or restarted without exception. I couldn't suffer my phone doing that and I tried everything to fix it. Restoring was the only way to get it working properly. Now it's works perfectly and you can put in any SIM without any complaints.
    Reply if you want any more info.
    Aled

  • Pxi rt detection issue in MACX

    hi frenz,
    i'm using PXI-8186 RT for my application. The issue is, sometimes RT is detected in MAX and sometimes it's not detected in MAX. If once i do format and reinstallation everything, it's been detected and again it becomes unable to detect in MAX. give me the solution if anyone knows..... 

    ragu,
    There are many factors that can cause your RT PXI not to show up (networking, firewalls, software, driver, etc). The most common issues with real-time targets not showing up in MAX are outlined here:  Why Does My CompactRIO Controller Not Show Up in Measurement & Automation Explorer?. The document is written for cRIO, but some of those run the same RT operating system as your controller (PharLap). One difference is that you will not need the NI-RIO driver to see the PXI.
    If you are connected through a router or a switch, I would try connecting directly through a crossover cable and see if the problem goes away:  Connecting to a LabVIEW Real-Time (RT) Target with a Crossover Cable
    Cheers, 
    Misha

  • Data Detection Issue, some months not recognized...

    Doing a lot of testing with mail.app I've finally found out why the data detection was so unstable.
    Dates in the months of March, May and December are not detected !!!
    Now, I realize that this is most likely only an issue in my current language setting "Danish", but all support leads me here... (no local support)
    Any Danish people having this issue? Or anyone know how to contact apple with a language-specific issue?

    how to contact apple with a language-specific issue?
    Have you filed a bug report yet by any chance?

  • Cameras detection issue

    Hi there,
    I've detected some issues in air when I run an exported release build. 
    The problem is as follows, I use Camera.names to get all the video input devices which Air can detect. Then I plug my firewire camera, run in debug mode and I see that camera as "video DV".
    Next, I export release build of the same source to obtain the .air application, install and run that versión but there is no trace of the "video DV" camera.
    I can´t imagine what happens, and It's making me crazy.
    Thanks in advance.
    Just to make it easier, I post all data, and if you need more, please ask for it.
    ---------------- APP source ---------------
    Alert.show(Camera.names.toString()); //Quite simple ;-)
    ---------------- System information ---------------
    OS: Mac OSX 10.6.8
    Flash Builder: 4.0.0.272416
    Air SDK: 4.5.0.20967 (I have performance issues with 4.6.0)
    Air Runtime: 3.3.0.3650

    I suspect you are running into a bug that was introduced in Flash Player 11.2 and also affects AIR.  Could you please open a bug over at bugbase.adobe.com and add a link to this thread in the bug report?  Please post back with the bug number or URL so that others affected can add their votes and comments.
    Thanks,
    Chris

  • HDVsplit scene detect issue using CS4 export

    Okay, I first used HDVsplit to read a HDV tape I made using CS3. It seemed to have some dropped frames at a number of places, so I decided to make a new tape. I had the m2t master files on my hard drive, so I decided to try the cs4 program. I used cs4 to export these files to my sony tape unit. No visible issues. But, when I used HDVsplit to try and read the tape, using scene detect, it looks like it thinks there is a scene detect break like every second. Never saw this issues with CS3. Any ideas?
    Thanks
    Dave

    Well, I just tried with CS3 and it does the same thing.
    Dave

  • HDVsplit scene detect issue using CS3 export

    Okay, I first used HDVsplit to read a HDV tape I made using CS3. It seemed to have some dropped frames at a number of places, so I decided to make a new tape. I had the m2t master files on my hard drive, so I decided to try to make a new tape. I used cs3 to export these files to my sony tape unit. No visible issues. But, when I used HDVsplit to try and read the tape, using scene detect, it looks like it thinks there is a scene detect break like every second. Never saw this issues with CS3 before. Any ideas?
    Thanks
    Dave

    Dont use scene detect? Do you not like to manually capture?
    Scene detect reminds of those old avid systems with the " auto edit" button. If it were only that easy.

  • Graphics Detection issues on video games

    I'm having issues with my laptop graphics and graphics detection whenever i play videogames. My main issue i am concerned about is the fact that whenver i play something remotely new, the game itself will try to detect my graphics card so it can adjust the graphics of the game accordingly to my system's specs but the game cannot detect graphics settings so i have to manually adjust the graphics on my own. i was wondering is this a problem lying within the operating system or is this hard coded in by hp? i just want to be able to have my games automatically detect optimal graphics settings so i do not have to mess with any settings on my own. any help would be appreciated. thank you

    Hi @mdxfever2011 ,
    Welcome to the HP Forums!
    It is a terrific place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you are experiencing a difficulty when you play games, they are  not auto detecting the  graphics on your system.
    Are you playing online games or from an  installed game.  If it is an installed game please contact the game manufacturer for assistance. 
    If is online it could be a firewall preventing the detection.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • 1140 and 4400 WLC detection issues.

    I am not able to get our 4400 WLC to detect a new AIR-AP1142N-A-K9. (1140 series).
    I have given the interface bvi1 an ip address and subnet mask that the controller should pick up.
    The software version of the 4400 WLC is 7.0.230.0.
    The software version of the AIR-AP1142N-A-K9 is C1140-K9W7-M.
    I am able to connect older AIR-LAP1242AG-A-K9 units without any problem using the LWAPP commands but this unit does not seem to support these commands?

    I obtained the Wireless LAN LWAPP Upgrade and Recovery Image for 1140 Series (c1140-rcvk9w8-tar.124-21a.JA2.tar) and issued the following command:
    "archive download-sw /force-reload /overwrite tftp://TFTPSERVER/c1140-rcvk9w8-mx"
    I receive the following error:
    "%tar checksum error in fd 0 ERROR: Failed to extract from archive file tftp://TFTPSERVER/c1140-rcvk9w8-mx"
    Is this the correct image?

Maybe you are looking for