WCS: Bug with unique client report?

I'm running WCS 7.0.172.0 and have run into the situation where a Unique Client Report, when run for the last day, shows lots of clients (properly).  When you select a specific date range, you get no records, regardless of the date range (you can even select the last 24 hours with the drop-downs).  Is this a bug?

I've gone back and forth with TAC on this, and it's been explained to me that the function of the report has changed recently and the description for what it does is no longer valid.  I STILL think there is a bug in this, however, as it appears whenever I run this report, it only shows me the unique clients RIGHT NOW, even if I pick "last day" which I'm told is really the only valid criterion... something is definitely broken here.

Similar Messages

  • WCS Unique Client report problem

    If I run a "Unique Client" report in WCS (based on 4 controllers) using the range "last 1 day", I get plenty of data.  But if I choose a specific range of time, even within the last 24 hours, I don't get any data.  Seems like a bug.  Anyone else experience this issue?
    It's WCS 7.0.172

    Seems you are facing below bug and needs a patch uniqueclients.xml which can be provided by TAC.CSCtq64813
    Apply the workaround which done by the following steps:  1. Stop WCS 2. cd to /webnms/classes/com/cisco/server/reports/conf 3. Backup UniqueClients.xml 4. Copy the attached file to UniqueClients.xml (batch file attached in the case) 5. Restart the server

  • 30EA3: German language bug with user defined reports still not fixed

    In 30EA2: Limited folder functionality with German language
    I wrote about a bug in 30EA2. Was this message noticed by the developers?
    The bug still exists in 30EA3.
    In new folders for user definded reports only the options "Kopieren" and "Exportieren" (copy and export) are available, when SQL-Deverloper runs in German language mode.
    A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf

    I made a new thread for the same bug in 3.1EA2:
    3.1EA2 Old bug with German language settings still exists
    I have some hope, that my problem finally got noticed by the developers.

  • Test Stand Sequence Example - OverrideSe​rialNumFor​ParallelMo​del.Seq Bug with Socket Index Report?

    Hello -  is there a way to have the testand sequence  "OverrideSerialNumForParallelModel.Seq"   give the reports correctly with the "Test Socket Index"  Correctly at 0,1,2,3 instead of each window haveing 0,0,0,0
    I've spent a long time trying to get it to work  with my applciation -but can't seem to find the answer.
    OverrideSerialNumForParallelModel  can be found at: 
    \\Examples\ProcessModels\ParallelModel
    Many Thanks 
    brad
    Brad Whaley
    LabVIEW Certified Engineer
    Attachments:
    parallel-bug-testsand-report-index.jpg ‏156 KB

    Hi Brad,
    The reason that all of the report view tabs are displaying the same socket ID is that you are currently generating a single report file for all of your test sockets (the default behavior), and this same report file is being displayed for all of the sockets.  You will notice that if you scroll down in any of the reports, results for all of the other sockets will be present.  If you would prefer to have a separate report file for each test socket, you can enable the New UUT Report File for Each Test Socket report options as shown below.  
    Let me know if this does not fix the problem for you!
    Al B.
    Staff Software Engineer - TestStand
    CTA/CLD

  • Potential Bug with LabVIEW 2009, Report Generation Toolkit, and MS Office 2003

    We have discovered an issue with the above listed software.  Specifically this pertains to Print Report.vi in the Report Gen palette.  Basically, we have discovered that with Office 2003 installed the VI will error out.  We've been using it in an executable, and the executable physically fails (and asks us to report an error to Microsoft).  With Office 2007 we don't have a problem.  We've tried building the examples into executables, and those work because they are printing HTML reports.
    Also, we have converted back to LabVIEW 8.6 and rebuilt the executable and installed and it works perfectly.  Its on the combination of LabVIEW 2009 and Office 2003 that seems to fail.

    yeah, we had seen that, and been told about it by another user.  we tried, to no avail.  we still have ended up having to migrate back to 8.6.1 to get the executable to run properly.

  • 3.1EA2 Old bug with German language settings still exists

    In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
    In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf
    I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
    Edited by: user1775992 on 22.11.2011 03:30

    I have raised a bug on this issue and I am actively looking into it.

  • WCS Busiest Client Report Problem

    We are using Wism 4.0.155.5 and WCS 4.0.81.0. Everytime I run "busiest client report" on WCS, I get some clients with throughput more than 70Mbps and utilization more than 600%!!! It is very weird. Anyone see this as well? Thanks.

    zhenningx:
    I see it too. It definitely appears to be a bug, but I will do some checking. Mine show upwards of 2000% and most of my top 25 show an almost identical tx/tx amount of 4gb.
    If I make any headway with TAC, I'll let you know.

  • Detailed client Report in WCS

    Hi,
    what exactly mean the fields of the traps  that appear in the Detailed Client report of the WCS?
    07/08/10 08:09,"00:04:23:71:67:bf",,"Campus> Ome > CN.OM.P03","XSFK2MP345","10.120.205.25",07/08/10 08:09,"0 secs","0.0.0.0",0,-128,"802.11b","N/A",0,0,0,0,"No","Associated","Client '00:04:23:71:67:bf' is associated with AP '00:23:eb:2d:8a:e0', interface '0'."
    which means many  associations of  "0Sec" with no IP assigned?
    Thanks!

    Hi,
    Are you still facing this issue?
    thanks,
    Vinay

  • Is SAP BI reporting is possible in ECC 6.0 with same client

    Hi all,
                             My requirement is, we need to design SAP BI data flow in ECC 6.0 with same client only.  Now I am designing the BI data models as per the requirement of SD sales reports in ECC 6.0.For this, when i was extracting the data from SD datasource(2lis_11_vahdr) in RSA3 its showing 0 records,actually  as per VA01 some records are available but its not showing in the RSA3.
                              My doubt is , is it possible to extract the data from ECC 6.0 and load the data to the datatargets  and get the SAP BI reports in ECC6.0 with the same client.
                              Please suggest as soon as possible.
    Thanks

    It is possible to load the data from the same client. It all depends on the source system and the client which has been connected in the RFC connection.
    Let me know if this helps.
    Regards,
    Avinash

  • Bug with Business Objects 3.1 Client installation. Very annoying indeed.

    I have faced a few issues while developing with the Client installation (which includes the Client Development SDK) of business objects 3.1.
    Some of the code just don't work with the client installation. They give Invalid cast exceptions. The same code will work fine with the server installation.
    For a simple example, consider the following straightforward code to set the destination-
    String query = "Select SI_DEST_SCHEDULEOPTIONS, SI_PROGID "
              + " From CI_SYSTEMOBJECTS Where SI_PARENTID=29 and "
              + " SI_NAME='CrystalEnterprise.DiskUnmanaged'";
            InfoObjects destinationInfoObjects = infostore.Query(query);
            InfoObject infoObject = destinationInfoObjects[1];
            //Set the options for the disk unmanaged destination
            DestinationPlugin destinationPlugin = (DestinationPlugin)infoObject;
            DiskUnmanaged diskUnmanaged = (DiskUnmanaged)destinationPlugin;
            DestinationOptions destinationOptions = diskUnmanaged.ScheduleOptions;
            DiskUnmanagedOptions diskUnmanagedOptions = new DiskUnmanagedOptions(destinationOptions);
            diskUnmanagedOptions.DestinationFiles.Add("C:\\");
            diskUnmanagedOptions.UserName = "your_username";  //Change these according to your logon settings.
            diskUnmanagedOptions.Password = "your_password";
            schedulingInfo = publication.SchedulingInfo;
            schedulingInfo.Destination.SetFromPlugin(diskUnmanaged);
    This code will give an invalid cast exception as follows-
    System.InvalidCastException: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.DestinationPlugin'.
    This happens at the line -
    DestinationPlugin destinationPlugin = (DestinationPlugin)infoObject;
    Now, this code works fine on a box where the server is installed.
    I have noticed this with a few other areas as well where the code fails with client installation but works on the server. This is really annoying because all the deveopers now have to install the server on their boxes.
    It is actually worse if just the Client Developer SDK is installed (and not the whole client). You would expect that just the SDK installation would be enough for one to do the coding. But doesn't work at all.
    Have others not faced this issue?

    Hi Dan,
    Thanks for your response. However, what I meant by client installation is exactly as what you have said below.
    I start the BusinessObjects Enterprise XI 3.1 Setup, go to custom install, which shows up the following options-
    Client Components
    Web Tier Components
    Server Components
    Database Access
    etc. etc.
    Initially I unselected all, drilled down Client Components and just installed the Developer Components. But the code used to fail with an InvalidCast exception when we used to cast an InfoObject to a Report as following-
    Report report = (Report)infoObjects[1];
    This code used to work fine with earlier installations of business objects.
    This happened with all 3 of us who installed just the Dev components. To get over this we installed the whole Client Components and the above problem got resolved.
    And now we realize that even the whole Client Comp is not enough because it gives the casting problem while doing the destination stuff.

  • Possible Bug with SqlDataAdapter.Fillschema DataColumn.Unique values are not populated.

    Hi all,
    I have done a lot of searching for answer to this problem this evening and so far have not found a solution but have found multiple people with the same issue.
    When using SqlDataAdapter.FillSchema() from a table that contains a Primary Key and columns with Unique constraints the only DataColumn.Unique value to be populated is the Primary Key.
    From reading the MSDN entry for dbDataAdapter this is not the intended functionality
    Can anyone suggest avenues to try or where to raise this issue if the method truly is not functioning as intended?

    Hello HarborneD,
    >>When using SqlDataAdapter.FillSchema() from a table that contains a Primary Key and columns with Unique constraints the only DataColumn.Unique value to be populated is the Primary Key.
    From your description, it is not very clear how your table is defined, I tried to reproduce this issue with below table(not sure if it is similar with yours, if not, please share it with us):
    CREATE TABLE [dbo].[T20141230] (
    [ID] INT NOT NULL,
    [Name] NCHAR (10) NULL,
    [Birthday] DATETIME NULL,
    PRIMARY KEY CLUSTERED ([ID] ASC),
    CONSTRAINT uc_PersonID UNIQUE ([Name])
    And the code used to full the schema:
    SqlConnection con = new SqlConnection(@"Server=(localdb)\Projects;Database=ADO.NET;Trusted_Connection=True;");
    try
    con.Open();
    SqlCommand cmd = new SqlCommand("select * from [T20141230]", con);
    SqlDataAdapter da = new SqlDataAdapter(cmd);
    DataTable dt = new DataTable();
    da.FillSchema(dt, SchemaType.Mapped);
    da.Fill(dt);
    catch (Exception)
    finally
    con.Close();
    However, I could all columns populated with values from database. I used VS2013, .NET 4.5 and windows 8.1, you could have a try with my demo.
    >>Can anyone suggest avenues to try or where to raise this issue if the method truly is not functioning as intended
    If it is an exact issue which is not reported yet, you could post it to this site below:
    https://connect.microsoft.com/VisualStudio
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

    In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

    Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
    if ({@param} = 1 then
    GroupName ({@GroupBy})
    else
    {NetPNL.GrossAfterAdj}
    but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
    MN 100
    MN 200
    MN 50
    CA 300
    CA 500
    when the data shows in the report, its grouped by state, so it comes out like
    MN 350
    CA 800
    I want the users to decide whether they want it sorted by state  (ascending)
    CA 800
    MN 350
    or Total quantity (asc)
    MN 350
    CA 800

  • [svn:bz-trunk] 8678: Bug: BLZ-255 - trader desktop sample with per-client-qos-polling-amf channel is confusing

    Revision: 8678
    Author:   [email protected]
    Date:     2009-07-20 01:20:31 -0700 (Mon, 20 Jul 2009)
    Log Message:
    Bug: BLZ-255 - trader desktop sample with per-client-qos-polling-amf channel is confusing
    QA: No
    Doc: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-255
    Modified Paths:
        blazeds/trunk/apps/samples/WEB-INF/flex-src/traderdesktop/src/traderdesktop.mxml

  • WCS 7.0 - Monitor Clients displaying wrong info

    Hi,
    I've been having some problems with the Monitor Clients menu on a WCS 7.0 server, for instance if I go there and display the detected clients on the last 24 hours I get a different set of clients than if I go and generate a report of unique clients for the last day on the report menu. Is this normal?, shouldn't both reports get the data from the same place and give the same result?. Thanks and resgards,
    Gabriel.

    Sure, here a couple of screenshots of what's being displayed.
    that's the output of monitor->clients->clients detected in last 24 hours. As you see there are 2 clients d0:b9 and 87:5b, now if I run a report on unique client for the last day I get:
    This shows two different clients 65:86 and 08:8a. I've also seen other errors on Monitor Clients for instance if I look for associated clients and have two clients associated sometimes it shows only one or none at all. Hope that clarified my question. Thanks and regards,
    Gabriel.

  • Does WCS come with the 5508 WLC?

    Forum
    I am providing a quote to a client for a wireless installation.  I have two 5508 boxes and about 40 AP's on the quote, as well as associated SmartNet.
    I was reading how the Cisco Unified Wireless Network is comprised of:
    Controllers
    Access Points
    The Cisco Wireless Control System (WCS)
    Cisco Mobility Services Engine
    My questions are:
    1.  Does WCS come installed on the Controller?  Is this something that the customer receives simply by virtue of the fact that they are purchasing the Controller?  Or is this a separate piece of software with a cost?
    2.  What exactly is the Cisco Mobility Services Engine?  What does it do that the Controller will not?  How would I sell one to a customer?
    Thank You
    Kevin

    WCS is a Windows 2003 application (so not "on the controller") that is completely separate and has to be purchased separately with different levels of licensing for different feature sets.
    WCS is most useful when having several WLCs to manage and is offered when you buy a lot of stuff I think.
    WCS alone brings better reporting features (graphs, pdf reports, ...) and maps to visualize everything.
    MSE is a kind of "calculation appliance" that you link to your WCS to locate all clients and rogues in real-time on the map. Only that. But it's a cool enough feature :-) Without MSE you can only view one client at a time (when entering its mac address in the search field) on WCS maps.
    Nicolas

Maybe you are looking for