WCS - controller list not fully populated
Hi Folks,
I have a WCS v.7.0.230.0 and four controllers v.7.0.235.3 (on two WiSMs). I have a problem now where when adding/modifying guest users the controller list shows only three controllers. I don't know when this started happening or why but no matter what I do (including removing the controller and adding it again) I can't get the controller list to be fully populated with all four controllers. I've attached an image of what I'm seeing.
Other functionality appears to be normal, for example I can add "mac filtering" addresses to all four controllers with no problem, APs can register to the affected WLC etc. Any help would be appreciated!
Thaneks. S.
Hi Shane,
I am having a lot of such issues on my WCS (Same version )
I just wanted to suggest you to check your virtual domains. but as you get the issue fixed then that is great news.
Greetings,
Amja
Rating useful replies is more useful than saying "Thank you"
Similar Messages
-
Drop Down List not getting populated
Dear All,
I have developed a form in SFP which containes a drop down list.The drop down list is to be populated by an internal table field.
Whenever I am executing the form i can see only the first item in the drop down listand nothing else.
While debugging i could see the almost 15 entries in the internal table.
I have mapped a field of this internal table to the drop down list.I am unable to figure out the problem....do let me know which type of drop down list should i use for this scenario....I even tried with java script...but nothing works for me...do let me know??
Waiting for t
Regards,
Geethi,
i guess you have bound the field but not the list elements of the field.
the content of the field (as result of the selection from the drop down list box) can be bound to a variable.
But if you want to display your internal table as entries in your drop down list box you have to do some dynamic data binding of the list elements.
to be able to do this, you first have to activate dynamic data binding in general. Use the way i proposed (--> extras from the toolbar!, options, data binding, dynamic). then the word "list elements" in the object palette of your dropdown list box will be green and you will be able to do some dynami data binding!
i recommend you this one:
--> http://www.adobe.com/devnet/livecycle/articles/strategies_creating_forms_lc_designer8/strategies_for_creating_form_designs_using_designer8.pdf
br
norbert -
ALV Block list. Field name at user command not getting populated
Hi All,
I'm trying to use ALN block list. Field catalog is built using the REUSEALVMERGE FM.
I've put hot spot on some fields. When I'm trying to capture the data when user clicks on the hotspot field the structure that comes in the user_command subroutine is not getting populated with the fieldname. But it is getting populated with the tabname and value is also coming properly.
FORM user_command
USING
ucomm TYPE sy-ucomm
selfield TYPE kkblo_selfield.
What could be the possible reason?
I appreciate your inputs.Hi Surya,
Did you find the solution for this?
Best Regards. -
WCS and WLC WLAN Config not fully in sync
Hi,
We're facing the issue WCS and WLC WLAN Config is not fully in sync. WLC showing server 1 is IP:10.160.22.151, Port:1812 but WCS server showing none even after click on “Audit” button. Any idea how to resolve this issue? Is this causing any wireless problem? Attached is screen captured. Thanks for your help.You mentioned "audit". Have you done a WCS audit so the WLC and WCS are in SYNC?
If you make a change on the WLC you will not see it in WCS UNLESS they are SYNC. You will see the term "mismatch".
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
"I'm in a serious relationship with my Wi-Fi. You could say we have a connection." -
UCS MP for Microsoft Ops Mgr R2 not fully working - can anyone help?
Hi, I'm responsible for Ops Mgr in our Organization and we have recently deployed a large UCS installation. I have just installed the management pack as per the Quickstart guide, but unfortunately I have had some problems getting it to discover/monitor properly (even before I get a chance to do any tuning of alerts).
Intially after install, in diag view the following 5 nodes appeared but NONE where being actively monitored (empty circle beside icon) for HW Inventory,Hypervisors,Operating Systems,Service Profiles,Virtual Machines. (Note i had installed the VMM MP as prereq for monitoring virtual machines). After a bit of play with the RunAs account/Profiles and trying to add in virtually all relevant UCS classes, I have now go 2 out of the 5 nodes being monitored, ie HW Inventory and Service Profiles (I had used overrides to reduce discovery to 5mins (as per quickstart guide) to quickly get the objects discovered. This is all I am getting, I cant get the other 3 nodes discovered/monitored at all!!
I was wondering if anyone else has successfully installed this MP and got it fully working - if so I'd love to hear from you and see if I can get mine working as it would be great to add value to our monitoring solution. Any help much appreciated!!...
CheersPlease provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key
(alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed.
You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode.
Please upload and share with everyone copies of your System and Application logs from your Event Viewer to your Sky Drive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window select Windows
Logs and System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Some Event Viewer reports are generated solely because the computer is in safe mode or safe mode with networking. You have at least one example of this in your long list. If you do not see the same report for a time when
the computer was in normal mode then it can be disregarded.
You will find some general advice on interpreting Event Viewer reports here:
http://www.gerryscomputertips.co.uk/syserrors5.htm
Hope this helps, Gerry -
Some client data not being populated after upgrading to NCS 1.1.0.58
After upgrading to Cisco Prime NCS 1.1.0.58 some of the client data is not being populated or gathered. The graphs labeled "Client Count By Association/Authentication" and "Client Count By Wireless/Wired" are no longer being updated? Not sure what was changed during the upgrade or where to look to get it to start collecting the data again?
Eajackson,
Make sure your WLC, MSE and WCS/NCS code matches the compatibility matrix here:
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Sent from Cisco Technical Support iPhone App -
OVS value not getting populated in field
Hi Experts,
Kindly suggest me a solution for the below given issue.
I have added three custom fileds to an already existing WD Coponent.
And also added OVS help as an input help method to these fields.
If I right click on the WD application and TEST, the application opens in browser and I am able to select the value from OVS list.
If I run the application by copying the URL and paste it in the browser, or clicking on Portal link, if we select the value from OVS list that value is not getting populated in the field.
Below is the logic I have written.
method ON_OVS_PAYMENT .
TYPES: BEGIN OF ty_payment,
payment TYPE char4,
desc TYPE char30,
END OF ty_payment.
* declare data structures for the fields to be displayed and
* for the table columns of the selection list, if necessary
types:
begin of lty_stru_input,
* add fields for the display of your search input here
payment type char4,
* desc type string,
end of lty_stru_input.
types:
begin of lty_stru_list,
* add fields for the selection list here
payment type char4,
desc type char30,
end of lty_stru_list.
data: ls_search_input type lty_stru_input,
lt_select_list type standard table of lty_stru_list,
ls_text type wdr_name_value,
lt_label_texts type wdr_name_value_list,
lt_column_texts type wdr_name_value_list,
lv_window_title type string,
lv_group_header type string,
lv_payment type string,
lt_payment TYPE TABLE OF ty_payment,
ls_payment TYPE ty_payment,
lv_short TYPE string,
lv_table_header type string.
field-symbols: <ls_query_params> type lty_stru_input,
<ls_selection> type lty_stru_list.
case ovs_callback_object->phase_indicator.
when if_wd_ovs=>co_phase_0. "configuration phase, may be omitted
* in this phase you have the possibility to define the texts,
* if you do not want to use the defaults (DDIC-texts)
ls_text-name = `PAYMENT`. "must match a field name of search
ls_text-value = `Terms of payment`. "wd_assist->get_text( `001` ).
insert ls_text into table lt_label_texts.
ls_text-name = `PAYMENT`. "must match a field in list structure
ls_text-value = `Terms of Payment`. "wd_assist->get_text( `002` ).
insert ls_text into table lt_column_texts.
ls_text-name = `DESC`. "must match a field in list structure
ls_text-value = `Description`. "wd_assist->get_text( `002` ).
insert ls_text into table lt_column_texts.
ovs_callback_object->set_configuration(
label_texts = lt_label_texts
column_texts = lt_column_texts
group_header = lv_group_header
window_title = lv_window_title
table_header = lv_table_header
col_count = 2
row_count = 20 ).
when if_wd_ovs=>co_phase_1.
ovs_callback_object->context_element->get_static_attributes(
importing static_attributes = ls_search_input ).
* pass the values to the OVS component
ovs_callback_object->set_input_structure(
input = ls_search_input ).
when if_wd_ovs=>co_phase_2.
if ovs_callback_object->query_parameters is not bound.
******** TODO exception handling
endif.
assign ovs_callback_object->query_parameters->*
to <ls_query_params>.
if not <ls_query_params> is assigned.
******** TODO exception handling
endif.
* call business logic for a table of possible values
* lt_select_list = ???
lv_short = <ls_query_params>-payment.
CALL FUNCTION 'ZSIILESD001' DESTINATION 'LOGICALE22'
EXPORTING
i_payment = lv_short
TABLES
ET_PAYMENT = lt_payment.
lt_select_list[] = lt_payment[].
ovs_callback_object->set_output_table( output = lt_select_list ).
when if_wd_ovs=>co_phase_3.
* apply result
if ovs_callback_object->selection is not bound.
******** TODO exception handling
endif.
assign ovs_callback_object->selection->* to <ls_selection>.
if <ls_selection> is assigned.
ovs_callback_object->context_element->set_attribute(
name = `PAYMENT`
value = <ls_selection>-payment ).
endif.
endcase.
endmethod.Hi Pradeep,
I don't think it really make any difference to the application run if we run from SE80 or run via application url.
Try to set the external break point in OVS PHASE3 for your user. Check if the break point is reached and data is set after selection from OVS.
Regards,
Rama -
Values not getting populated in the o/p
Hi,
I have a requirement,where in which I have to add MRP Controller(marc-dispo) and production scheduler(marc-fevor) fields in the selection screen and the same should be added in the o/p.These fields are not getting populated in the o/p,even if I give some values for these fields in the selection-screen.What would be the reason for this?
Regards,
HemaDear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'. "subtotal
>WRITE: 15 ls_stock-nrmit.
>WRITE 32 lv_stock-dispo.
>WRITE 43 lv_stock-fevor.
>ELSE. "total
>WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful. -
XREF3 field not getting populated in BSEG table while posting MIRO
Hi,
I have one query in MIRO tcode.I have activated xref3 field in MIRO tcode using enhancement LMR1MF6Q.Now when i try to post document with some values in xref3 field on screen ,value is not getting populated in BSEG table.Please tell me what else needs to be done to achieve this ?
any hint on this?
Thanks & Regards,
Soniya S.Hi,
1.- According to SAP Note 904652 - MIRO: Different from FB60
https://service.sap.com/sap/support/notes/904652
MIRO is an independent Materials Management (MM) transaction that does not
claim to be the same as the accounting transactions (such as FB60 or FB01).
MIRO was developed to allow users to process vendor invoices within the
context of the MM procurement processes as simply as possible.
For this reason, among other differences, the field selection was limited
to the absolutely necessary. For example, the following fields from the
accounting document are not available in Transaction MIRO (this list is not
complete):
Reference key (BSEG-XREF1, -XREF 2, -XREF 3)
2.- SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment
https://service.sap.com/sap/support/notes/1156325
Have a look at badi MRM_ITEM_CUSTFIELDS.
This badi will create a new tab at item level in order to display the new fields.
I haven´t used this badi so i cannot talk from experience here.
Think twice before deciding.
Best regards. -
Currency Field - KOMK-WAERK not getting populated
Dear All,
In my infoset, i am reading the value from KONV table. But when i generate the infoset, system prompts a Warning Message saying:
Currency Field KOMK-WAERK will not be filled. Affected currency amount fields: (& it gives out the list of fields).
In my data section when i put TABLES KOMK, then the message does not appear, but the currency field still does not get populated when i execute the query.
Any suggestions as to how i can make the currency field populate in my output?
Await inputs.
Anyone to help?
Edited by: Vivek on Feb 9, 2008 8:51 PMIs not KOMK a structure, you need to fill this structure. Try to map required fields as following :
CLEAR KOMK.
KOMK-MANDT = SY-MANDT.
KOMK-KALSM = VBDKR-KALSM.
KOMK-FKART = VBDKR-FKART.
KOMK-KAPPL = 'V'.
IF VBDKR-KAPPL NE SPACE.
KOMK-KAPPL = VBDKR-KAPPL.
ENDIF.
KOMK-WAERK = VBDKR-WAERK.
KOMK-KNUMV = VBDKR-KNUMV.
KOMK-VBTYP = VBDKR-VBTYP.
KOMK-BUKRS = VBDKR-BUKRS.
KOMK-BELNR = VBDKR-VBELN.
Regards -
HP Photosmart Premium All-In-One driver software will not fully install
After downloading and installing the full version of the printer driver (both from on-line site AND from purchased driver CD), the software appears to download fine, but will not fully install. I have run Print and Scan Doctor and tried on-line support, uninstalling, reinstalling the drivers and have tried on-line HP support. My new computer (HP Envy 715 xt) is less than 3 weeks old. I am running Windows 7 Professional 64 bit. The printer/scanner/copier/fax worked fine on my old computer which ran Windows XP. I have tried everything - HP on-line support will not speak to me without charging me, even though my computer is brand new - they insist the problem is with the printer, which is out of warranty.
Hello Deb!
I would recommend performing an L3 uninstall, and reinstalling.
I am listing the L3 uninstall steps below:
-Launch your temp folder
-Go to the 7z folder
-Go to the util\CCC folder
-Launch the uninstall_L3.bat file
Please let me know the results!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Drop Down Menu List Not Visible
Hi
I am using a Horizon menu across top of page for user to
select from a list of pages to go to but for some reason the menu
drop down list is not fully visible but rather appears behind other
elements on the page such as a flash video and a google ad . does
anyone know what is causing this or what setting i should set to
force the drop down menu to appear over the rest of the elements in
the page as you would want it do.
thanks
edward"egc2224" <[email protected]> wrote in
message
news:fum99r$2nb$[email protected]..
> what is z indexing?
http://www.tjkdesign.com/articles/everything_you_always_wanted_to_know_about_z-index_but_w ere_afraid_to_ask.asp
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
Keep your markup *clean* with these DW extensions and
scripts:
http://www.divahtml.com/products/scripts_dreamweaver_extensions.php -
I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
Is there some glitch in final cut express that only allows short clips to be transferred in full?Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
By the way, the other reply I received suggested the following:
In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
I did this and it was already unchecked. So this is not the answer...
The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min) the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
ANSWERS
how you are ingesting the files
From external flash drive connected directly to mac using FCE.
the format of the source footage
digital via ext flash memory. Frame size :1929X1080 / 25fps
what camera shot the footage
SONY HXR NX5
how you are connecting to the computer
from flash memory directly via usb
what version of FCE you are using
4
what OS your computer is running
10.6.8
what model Mac
macbook Pro intel Core i7
what drive you are using for Capture Scratch
3TB external drive (plenty of room left) -
BI 7 Portal - BEx Web Analyzer- URL used is not fully qualified.
Hi folks,
I have a problem while accessing BEx Web Analyzer on BI 7 Portal. When I select "Business Intelligence" -> "BEx Web Analyzer". This is ending up with a 500 Internal Server Error
Error Description
com.sap.ip.bi.base.exception.BIBaseRuntimeException: URL +used, "http://sdndevsap01:51200", is not fully qualified. +
A fully-qualified URL has a schema with the format "<protocol>://server.company.com:<port>". URLs with the format "<protocol>://server:<port>" or "<protocol>://<ip address>:<port>" are not fully qualified. See SAP Notes 581329, 596698 and 654326
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest
+(Page.java:2535) at + com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:978)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:864)
Pls Note:
-The parameter "icm/host_name_full" is already set with full hostname with domain. (Hostname.domain)
-I have also checked the SAP notes mentioned in the error and did not find any answer from them.
As per my understanding there should be a parameter which holds the portal link in JAVA Engine.(http://hostname.domain:50000/)
Pls help me in finding answer to this.
Thanks
James.
Edited by: James Best on Mar 5, 2008 8:13 AMur questions 1 and 2 should be directed to portal administrator at ur firm..
as u r trying to change the lay out when user presses New analysis.
again in 2 u want to default the saving to favourites folders.
3. if u save a view and later u try to open or run another query ..
for e.g. in ur saved view of query1 the time period is 1/07-12/07
now u r running some query x which has time 1/08-4/08
and now if u try to open ur view of query-1 then it will take the time period of 1.08---4.08
but if u open bookmark it will bring it to u the xact screen and xact time variables with which u save query1 -
Failed to add device to WCS Reason: Object not found in device
Hi i am adding wlc (ver 7.0.116.0) to WCS (ver 7.0.164.0) and getting bellow error message.
Failed to add device to WCS Reason: Object not found in device
This controller was successfully added to the WCS before upgrading WLC ios to 7.0.116. Now i am unable to communicate with the controller thru WCS. The controller itself work ok and serve all WAPs with no issue.
Any ideas would be appreciated.
Regards.You will need to upgrade WCS to Version 7.0.172.0. WCS version 7.0.64.0 does not support or manage WLC version 7.0.116.0. Hope this helps.
Maybe you are looking for
-
Communication channel Failure of SFTP adapter type.
Hi, I have a communication channel failure while sending data from a system using SFTP adapter.But when i cross checked in SXMB_MONI i am unable to find any errors. Error is : Current transaction is marked for rollback: Trace of setRollbackOnly() inv
-
Datatransferservice CDTS Job DTS Job Bits Errorcode 0x801901F4
I have a new build of Server 2012 R2, SCCM 2012 R2 CU2, and SQL 2012 SP1 CU6. This same set of software works on another network. On the new network, I'm not been able to get any updates working that come through All Software Updates. 3rd Party Updat
-
I've had this happen quite a few times, I set up a new recordset in server behaviors, go back at a new column to the recordset and it creates a new copy rather than editing the old one example mysql_select_db($database_moshptyMySql, $moshptyMySql); $
-
Hello, I have created some test datas (req.s,tests etc) in my OTM.Suppose if I am reinstalling OATS,how can i get this test data in the new OTM.Can i export this test data to some .csv(windows) format,so that i can use by importing in to OTM. Can any
-
Lightroom links to uninstalled cs6 beta as default ext.editor
Hi, My LR4 installation links to uninstalled CS6 as external editor. I would want it to point back to CS5.1 which I still have on machine. I see no way to do, there is no option to change it like the second external editor. I hope I could make me und