WCS: How to filter alarms from trusted external AP's

Hello,
I have some Access Points outside of my LAN but trusted by me. I have tried to mark them in WCS as 'Known Internal' or 'Acknowledge External' but anyway I still get critcal alarms 'AP Impersonation...' (every 5 minutes) and major alarms 'AP is missing...' regarding these 'trusted' AP's.
Is there any way to avoid these reoccuring 'false' alarms?
Running WCS version 3.2.40 and WLC version 4.0.155.0.
Thanks
Kai

Similar Messages

How do I boot from an external CD drive?

On a different thread, I've been reporting problems with my internal HD.
When I went to Disk Utility and ran Verify Disk on the HD, I got the error back telling me that the Mac HD needs repairing. Now, to run the repair facility, I seem to have to reboot from the OS X CD rather than the Mac HD.
Trouble is, my internal optical drive failed some time ago (seems to be a known fault with iMacs that have the MATSHITADVD-R UJ-846 optical drive) and I've been using an external optical drive connected via firewire with no problems...until now. When I went to reboot from the CD (holding the C button down whilst selecting Reboot), my Mac just booted again from the internal HD.
How do I reboot from an external CD?
If I can do this, I can run the disk repair utility and hopefully all will then be well...
(Please spell out any suggestions for me as I am really quite new to all this stuff - Thanks!)

Hi Chris.
What is the version of the OS on the computer and what is the version of the OS Disc that you have inserted?
Make sure you have inserted the same version of the OS disc that is currently running on the computer.
For Example. If there is 10.5.x running on your computer, you have to insert 10.5 Disc and boot to it.
Cheers,
Gop's.

How do I boot from an external drive?

I've just Carbon Cloned my 60GB drive to a firewire external drive. I'm about to replace the 60GB with a 160GB drive and the CCC instructions say boot from the external drive I'd just created once the new disk is installed. Then CCC the cloned drive back to the new hard drive.
So, how do I boot from an external drive? Do I have load anything to the new drive? Will the macbook detect the external drive and boot from that? Or what??????
Thanks
Dick

Thanks DWB. Being the rash impetuous guy I am I didn't wait for replies and just switched on the macbook after installing the new disk (which was so easy it was unbelievable - had to go and buy a a little torx bit though) to see what would happen.
Blow me down with a feather if it didn't just boot off the external drive all by itself :-O It did come up with the disk was unverified and I could see it in FINDER and I was prseented with a screen to ERASE/RESTORE etc.
When I went to CCC the external drive back to the new hard drive it didn't give show me the new hard drive so I guessed I'd have to do something to format (?) the hard drive.
I don't know if I did the right thing but I went to disk utilities and chose ERASE in the vague hope it would maybe format the disk in some way.
Seems to work now and the CCC replaced the system perfectly as far as I can see.
Basically very impressive all round. Piece of proverbial to replace the disk and CCC made life so easy.
Thanks again.
Cheers
Dick

How to import music from an external hard drive to my itunes on my computer?

how can import music from an external hard drive that i saved my itunes music to. i dragged the music from my hard drive to the itunes on my computer but the music does not play from my itunes. it does however play on my ipod. it gives me an error that the original can not be found and do i wish to locate it. i am thinking that i did not drag the right file or all of the files necessary .thanks. kevin

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions

How to filter results from 4 dynamic list menus depandant on how many of them are selected

I have a search page with a form with 4 list menus and 1 submit that post the results to the results page. I can create a record set that either retrieves the correct data from my database if a selection is made from all four menus Or i can create the recordset if only 3 menus have a selection or the same for 2 menus and 1 menu. However i want the user to be able to make a selection from either 1, 2, 3 or all 4 of the menus and the exact data be retrieved. At present if i try to combine the recordset using AND and ORs the results are not specific enough, for example the 4 menus are Location, Type, Price & Style if a user selects from all 4 i only want to retrieve data that matches all 4 criteria, but at the same time if the user selects only 2 of the menus the i want it to retrieve data that matches specifically those 2 variables. I´m not actually sure if i should be creating a more advanced sql query of if its the php side of things that i need to look at. This is my first dynamic site so please be aware i´m still a learner where php and sql is concerned. Please can anyone help?

Hey there,
Thanks for replying,
I too am using Dreamweaver recordset, my local server is XAMPP ( apache php mysql), i´have pasted my sql recordset below to give an idea of what i´m trying to do, however this does not work as i´m trying to select the exact data based on 4 menus PRICE TYPE LOCATION and BEDS, and also want the search to work if the user only selects options from either 1, 2, 3 or 4 of the menus, with the code as it is if the user select only two options from 2 of the menus the results don´t just find (for example) all results for location AND price they find all results for the location varibale OR the price variable rather than a match for both, if you see what i mean?
Any suggestions?
SELECT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number`
FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid
WHERE (location=varloc AND price = varprice AND type=vartype AND beds=varbed ) OR (price=varprice AND location=varloc AND type=vartype) OR (price=varprice AND location=varloc AND beds=varbed) OR (price=varprice AND beds=varbed AND type=vartype) OR ( location=varloc AND type=vartype AND beds=varbed) OR (price=varprice AND location=varloc) OR (price=varprice AND type=vartype) OR (price=varprice AND beds=varbed) OR (type=vartype AND location=varloc) OR (type=vartype AND beds=beds) OR (location=varloc AND beds=varbed) OR (price = varprice OR beds=varbed OR type=vartype OR location=varloc)
ORDER BY detailstable.trueprice ASC
Look forward to receiving your thoughts,
Linda
Date: Wed, 21 Oct 2009 14:36:33 -0600
From: [email protected]
To: [email protected]
Subject: how to filter results from 4 dynamic list menus depandant on how many of them are selected
Hiya,
I'm just doing my first dynamic site too, and am at a similar level to yourself.
Can you give us more info re the site. What software, eg Dreamweaver etc are you using, and is your server using PHP or ASP etc?
For what I've used, I amended the SQL side of things in the recordset in Dreamweaver. That way, you can test the SQL as you're setting up the recordset.
Let me know how you're going on anyway
Cheers
Andy
>

How to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area. What are the other ways

I am a cityville game player on facebook and for some reason today I am unable to send out blasted on the game when if fact this was never a problem. Finally I went to internet explorer and the same problem happen, but internet explorer let me know that the content was blocked. All I had to do was unblock it and that was easy and know I can blast out. However trying to remove the block from fire fox is a issue. I went into to tools and removed every block and it still want work right. Therefore, how to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area under tools options. What are the other ways

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to install data from an external sd card onto my tablet (a5500-f)

how to install data from an external sd card onto mt tablet (A5500-F).

Choose Computer from the Finder's Go menu, double-click the drive, and drag your documents back.
(111169)

How to import pictures from an external memory into Iphoto?

How to import pictures from an external memory into Iphoto. Is there a way to open all the pictures in my computer in the Iphoto?

to import photos either use the iPhoto file menu ==> import command or drag the photos to the iPhoto icon in the dock
LN

HOW TO FILTER DATA FROM MICROSOFT ACCESS

HOW TO FILTER DATA FROM MICROSOFT ACCESS BASED ON DATE AND TIME AND GIVE THE RESULT TO A TABLE ?
I need some example files , can anybody please help me ?
Solved!
Go to Solution.

Just be sure to get examples specific to the Jet DBMS. It is rather "idiosyncratic" when dealing with time and date values.
One question: the timestamp is being saved in a datetime field, right?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to save photos from an external memory

How do I save photos to my new MacBook Air from an external memory (StoreEdge)? And how do I know where the photos that I can view in Iphoto are stored? I thought I had copied a whole Iphoto library from StoreEdge to my MacBook, but when I try to remove the StoreEdge it says that it's not possible because it's being used.

You can import the photos into iPhoto by using the iPhoto File menu "Import to Library."
The default location for the iPhoto Library is username/Pictures/iPhoto Library
You should only work with the library using iPhoto (i.e., don't attempt to open the library and work with the files inside directly from Finder).

HT201250 How do I restore from Timeline external backup to a different drive?

Good day! Here's my current architecture
1 MacBook Pro OSX 10.8.2
1 Lacie Rugged External Drive (1T)
1 G Drive 2T RAID
1 MyPassport External Drive (2T)
I have been backing up weekly both the MacBook Pro AND the Lacie to the RAID Device.
Lacie Rugged: My Lacie has my iTunes. Recently there have been issues with communicating with the Lacie. Genius bar says there is an issue with the drive itself. I purchased a new Firewire to troubleshoot. Still shows that the drive accidentally disconnects (e.g. not available) after about a couple of minutes.
So I bought a new drive.
Restore: When I plug in my new MyPassport and access my Timeline backups, I cannot see the Lacie backups to restore. It seems that Timeline requires the original drive (Lacie) to be plugged in (which is the one I am having issues with).
Question: How do I restore from a backup(Lacie) to my new external drive(MyPassport)?

I imagine you mean Time Machine, not TimeLine. If you do mean Timeline, I have no idea what that is.
Try Pondini's FAQ#16: http://pondini.org/TM/16.html
And, #18: http://pondini.org/TM/18.html

How to install Windows from an external cd-romd

since my previous thread was pretty much ignored - i dare someone again:
To all,
I am not able to get Boot Camp to load vista from the external CD-ROM since the internal one is totaly disconnected. It does nothing. It spins the CD when it restarts then continues on to loading the login screen.
Bare with me - this is the fun part -
I got a 24" white iMac. CD-ROM was stuck and refused to take in new CD's. Took it to Apple, they replaced it. I bring it back home 2 days later and the screen is dented. They fix that in 4 days. Now I am finally able to start installing Vista.
Put the CD in - nothing happens - it kicks it out!!!! Well - its brand new - its even a different brand than what was in there before.
I take it back to apple, i give the lady all the ** in the world because this is not supposed to happen, etc.
They decide to give me a new iMac. While I am waiting, the manager approaches me and give me the 13 cents which were found in the cd-rom drive (thanks to my kids)
So I appologize - totaly ignored her wanting $450 to replace it, so I went and bought a Sony external DVD reader, burner.
Problem --
Boot Camp, Front Row + the DVD player software won't work off the external drive.
I took the mac appart - disconnected the dvd-drive from the motherboard thinking that if its not there, then boot camp will attempt to run off the external drive.
Put it back together - and rebooted - everything came up fine until using front row or the dvd player.
Boot Camp still won't read the external drive - no errors nothing - it attempts then quits and moves to the login screen.
Guys - I need help - i make my living off Windows so not having access to it - its killing me.
Please do not recommend parallels or anything else like it.
I am willing to try anything at this point. Before I go and spend $450 i will rather buy a new machine.
HELP!!! Anyone Please!!!!

OK, I reread your original post and you don't say if the Sony drive shows up in Finder if you insert a disc, it should.
That said, the point I think you're missing is that when BootCamp Assistant (BA) asks you to insert the Windows disc, the BA application does not read it. Instead BA tells OS X to reboot off the cdrom drive. Thus it's the bootstrap loader that has to know how to read off the specified device. Bootstrap loaders reside in firmware and are very limited programs. They generally only know how to detect selected key presses and how to read boot sectors of certain devices and pass execution to the loaded code. Reading from a USB connected optical device is not within the scope of a bootstrap loader.

How do install Tiger from an external USB drive?

I'm trying to upgrade from 10.2.8 to Tiger. How do I install Tiger from my external USB DVD drive? Tiger only comes on DVD and my G4 only has a CD ROM as an internal drive. Is there a way to boot from an external USB DVD drive?

bamim2,
you obviously just cracked some known hardware restrictions that not even Apple knew how to do: Don't start up from an external USB device.
The procedure you described is the standard procedure for the startup manager. However, as Apple's article explains this does NOT work with USB-devices on PowerPC (G3, G4, G5) based Macs.

How do you boot from an external drive when internal drive is dead?

The internal drive is dead, but I have a complete dupolicate on my fire-wire external drive. I think I remember reading that there is a combination of keys to press down when starting to allow one to choose which drive to use as a startup volume. As it is, the thing won't start up at all.
So I know it's supposed to run from the external drive, but how do you get it to boot from it without having designated it as the startup when it was last running?

Hold down the Option key when booting the computer.
When I asked the question I was working on my daughter's ibook.
Now I'm back home and I have a firewall external drive, so I tried pressing option when I started and icons for startup drive come up BUT there is only one icon -- that being for my internal drive. I know that the external drive, which has a duplicate of the internal, is capable of starting it up ok, because when I go ahead and , after starting it up on the internal drive, then pick the external drive to start and then restart it, it goes to the external drive ok. But again, if it has been preferrenced to start on the internal drive and I do the thing by pressing with option when I start, it doesn't give me the option to use the external drive. (The external drive is partioned, and the duplicate startup is in one of the volumes, but I don't think this should have anything to do with anything, since it can start up using the appropriate external hard drive volume when I have selected it in my preferences.)
G4 tower Mac OS X (10.3.9)
G4 tower Mac OS X (10.3.9)

How to install Leopard from an external DVD reader?

Hi,
I've bought Leopard today. unfortunately, it's not yet installed on my PowerBook. As my SuperDrive is dead, I use now an external DVD (Lacie Portable DVD-RW), but it doesn't work. I can read the Leopard install DVD, but when it reboot, it reboot on my current installation.
I've tried the following during the boot sequence:
- alt pressed, but I can only see my main HDD
- c pressed, but I boot on my current installation
Can you tell me if it is possible to install Leopard from an external DVD, and how can I do that ?
Thanks in advance.
Regards,
Emmanuel Di Pretoro

Can you tell me if the same problem occur with a FireWire external DVD ?
It does not occur on your model of Mac.
(25504)

WCS: How to filter alarms from trusted external AP's

Similar Messages

Maybe you are looking for