WCS integration with other NMS Tool

Hello friends...We are going to upgrade our existing WCS v5.1.65.4 to v6.0.170.0 and after that planning to integrate it with a 3rd part NMS tool.for any critical alerts\traps. So if any critical event related to WLC\AP received in WCS, it will send those alerts to NMS and based on the severity of alerts, The NMS will open a remedy ticket in BMC remedy tool. 
Can any one provide the document or configuration steps for WCS to make it as as trap sender for NMS

Really? I configured it with external NMS without problems. Did you heard about Notification  Receiver in WCS configuration. All traps received from WLC are forwarded to external systems.
Notification  Receiver
Server IP Address
Notification Type
SNMP
SNMP Parameters
Port Number
Community
I suggest to read the manuals http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0admin.html#wp1131316
http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0event.html

Similar Messages

  • Comparison with other authoring tools

    Most of the time people get into one authoring tool like Encore, DVD Studio Pro, Sonic Solutions Authoring packages, ...
    I have the feeling with Encore 2.0 that it is not a professional package (but of course I could be wrong);
    a lot of possibilities, but not reliable and the result is not very professional.
    Subtitles don't look too great,
    a lot of bugs, really a lot,
    seamless transitions between animited menus,
    I'm curious to hear comparisons with other solutions which are professional, to orient and know more about the differences and similarities.
    DaLuna

    DVDit is ghastly.
    Encore is based on Sonic's DVD Producer, but has had a lot more of the options "Switched on" in the Authorcore. Plus of course it has a far better GUI compared to the Sonic one.
    Scenarist is seriously good, but seriously expensive, and as it is not an abstraction layer tool, it has it's own unique issues as well.
    If you want to try your hand with the scripting side of things, then you should have a look at DVD-Lab Pro.
    It's about to go to version 2, which will include goodies like Multi angle, Button Over Video, that sort of thing.
    It's only drawbacks compared to Encore are:
    1 - No DLT output.
    2 - No built-in Transcoding. You MUST feed it with DVD compliant assets.
    3 - Poor PSD support
    4 - No integration with other Adobe products
    BUT, it is well worth a look at $200

  • Is Flash Builder 4.5 compatible with other Adobe tools from CS5?

    Hy,
    I have in my company CS5 Suite and we are planning to upgrade only Flash Builder from 4 to 4.5. Would it be still compatible with other CS5 tools, e.g. with Flash Profetional 5?

    drkstr_1 wrote:
    I assumed the original poster was refering to the build in integration of Flash Builder, Flash Pro, and Flash Catalyst. My Flash Builder 4.5 could not communicate to the CS5 version of those other 2 apps. Perhaps this was because I was using a preview release, I can't say for sure because the problem went away when I upgraded to CS 5.5.
    Yes, I was refering to build integration between Flash Builder 4.5 and Flash Professional CS5. Sorry, if I wasnt accurate.

  • SunOne Portal integration with other application

    How Sun Portal Server integration with other appliction?
    Where are have this topic information(pdf,html,etc)
    Plealse help me ! Urgency!!!!!
    yuan
    [email protected]

    Application Integration is done with providers(portlets)
    It depends on the API of your application.
    - Basic integration could be a dynalic SSO-Link in a simple provider.
    - Some apps via Netlet to remote access the application(wold/excel ...)
    - ERP/CRM integration via WSDL or XML/JSP proxy
    or even EJB, CORBA or JDBC connectors if your application support these APIs.
    For more info about providers see:
    http://docs.sun.com/db/coll/S1_PortalServer_60
    and
    http://docs.sun.com/source/816-6362-10/index.html

  • Event Server Integration with other Products

    I have been using the EDA approch in my SOA project for few years now. These were based on JMS and other modes of Events supported by the WLI, BPM products. Now we have a dedicated Event processing server can we expect utilities/UI components that would easE the integration with other BEA products? What is the time frame for the avilability for this as well as the console for the Wev server?
    Thanks,
    Anil Datt

    Hello,
    Thank you for your post. We do have some integrations with other Adobe products planned for the future, but it's too early to announce our plans. We appreciate your enthusiasm for Buzzword - please keep the suggestions & ideas coming.
    Kind Regards,
    Michelle

  • Oracle Sales Integration with other modules - Flow Diagam

    Hi,
    Where can i find a flow chart showing Oracle Sales Integration with other modules?
    Thanks,
    Hari

    Hi
    You can refer to my publishing in this site which might help you to some extent
    http://apps2fusion.com/at/sk
    Hope this helps
    Regards
    Sivakumar

  • Can Business Object Universe be used with other BI Tool

    Post Author: help_eachother
    CA Forum: Semantic Layer and Data Connectivity
    Hi,
    Can Business Objects Universe be used with other BI tool ?
    Thanks

    Post Author: amr_foci
    CA Forum: Semantic Layer and Data Connectivity
    like wat tools...
    i heared in an oracle session that their business intelligence system would be able to connect to other business intelligence system ex, business objects
    but i dont know how it works,, or even anything about oracle BI
    good luck

  • Customer Service (CS) module integration  with other modules VERY URGENT

    Customer Service (CS) module integration  with other modules like sd,mm,pm,fi
    documentation very urgent please send to my mail id [email protected]

    This is with regards to Integration of CS module with other modules:
    CS is in very close integration with Plant Maintenance(PM), Sales and Distribution(SD), FI, MM, Costing (CO) and also PP and HR.
    Incase you want to have resource related billing using DIP profile  (PM) you must have Cost element  and Service Products defined in MM etc.
    Itu2019s a very vast area needs to be explored based on the requirement in CS module. Any further assistance needed pls let me know.l.

  • Service desk integration with 3rd party tool

    Hi all,
    I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
    So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
    The webservice then will be called by the 3rd party tool with corresponding data.
    However, according to spro I need to define a value mapping for incoming/outgoing calls.
    I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
    SAPCategory
    SAPComponent
    SAPDatabase
    SAPFrontend
    SAPIncidentID
    SAPIncidentStatus
    SAPInstNo
    SAPOperatingSystem
    SAPSoftwareComponent
    SAPSoftwareComponentPatch
    SAPSoftwareComponentRelease
    SAPSubject
    SAPSystemClient
    SAPSystemID
    SAPSystemType
    SAPUserStatus
    What about attachments, priority etc.?
    Will the interface parameters mapped to these ones?
    For what purpose do I need to maintain the value mapping?
    Can you give me a hint?
    Regards, Richard Pietsch

    can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

  • LMS 3.2.1 integration with Clarity NMS for snmp trap forwarding

    Our client have integrated Clarity NMS to Ciscoworks LMS 3.2.1. So far they are receiving raw alarms/snmp traps but it lacks information/inventory of the originating device. Kindly see sample raw alarms below:
    2420: 2011-11-25 12:10:46 Received trap ==> Received SNMPv1 Trap
    Community=ciscoworks
    Enterprise=1.3.6.1.6.3.1.1.5
    Generip trap type=2
    Specific Trap Type=0
    Trap From=10.220.10.1
    Trap ID=1.3.6.1.6.3.1.1.5.2
    Trap Time=-1436283373
    1.3.6.1.2.1.2.2.1.1.83=83
    1.3.6.1.2.1.2.2.1.2.83=GigabitEthernet1/40
    1.3.6.1.2.1.2.2.1.3.83=6
    1.3.6.1.4.1.9.2.2.1.1.20.83=Lost Carrier
    EndTrap
    10933: 2011-11-24 11:57:53 Received trap ==> Received SNMPv1 Trap
    Community=ciscoworks
    Enterprise=1.3.6.1.4.1.9.1.291
    Generip trap type=2
    Specific Trap Type=0
    Trap From=10.220.10.1
    Trap ID=1.3.6.1.4.1.9.1.291.2
    Trap Time=1628056965
    1.3.6.1.2.1.2.2.1.1.8=8
    1.3.6.1.2.1.2.2.1.2.8=E1 0/0/0
    1.3.6.1.2.1.2.2.1.3.8=18
    EndTrap
    As you can see, those raw alarms doesn’t contain any information about the originating equipment or the physical card, port related information where those alarms were generated. Instead those alarms received are just NMS level alarms.
    How do we resolve this so that the inventory of the equipment would be part of the trap to be received by Clarity from Ciscoworks.

    Hi,
    Is the issue you have the source IP address of the forwarded trap?  Per RFC it is the IP of the actual device sending the trap.  The originating IP should be contained within the packet. I have included some additional information you may find helpful.
    Q. What is the difference between SNMP Raw Trap Forwarding and SNMP Trap alert/event Trap Forwarding? Does DFM support both?
    A. You can configure raw trap forwarding at DFM > Other configuration > SNMP Trap forwarding, and processed event/alert trap forwarding at DFM > Notification Services > SNMP Trap Forwarding. Processed trap is "when DFM receives certain SNMP traps, it analyzes the data found in fields (Enterprise/Generic trap identifier/Specific Trap identifier/variable−bindings) of each SNMP trap message, and changes the property value of the object property (if required)". Raw trap is the trap that the device forwards to DFM and DFM has yet to process it. For more information, refer to the DFM User Guide. Yes, DFM supports both ways of trap forwarding.
    http://www.cisco.com/en/US/products/sw/cscowork/ps2421/products_qanda_item09186a0080a9b35b.shtml
    DFM will only forward SNMP traps from devices in the DFM inventory. It will not change the trap format—it will forward the raw trap in the format in which the trap was received from the device. However, you must enable SNMP on your devices and you must do one of the following:
    Configure SNMP to send traps directly to DFM
    Integrate SNMP trap receiving with an NMS or a trap daemon
    The versions of SNMP traps supported by DFM are described in SNMP and ICMP Polling. For information on forwarding processed and pass-through traps, see Processed and Pass-Through Traps, and Unidentified Traps and Events.
    Pass-through traps are traps that DFM receives from devices that are not in the DFM inventory, and DFM has not processed. Forwarding these traps is controlled using Configuration > Other Configurations > SNMP Trap Forwarding. These traps are shown in the Alerts and Activities display because of their relevance to fault monitoring. Pass-through traps are displayed as follows:
    As one of the following events:
    > InformAlarm
    > MinorAlarm
    > MajorAlarm
    With the device type and the device name from which it was generated.
    If DFM does not know which device generated the trap, it ignores the trap. Pass-through traps will be cleared after a default interval of 10 minutes to one hour
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_device_fault_manager/3.2/user/guide/dfm32ug_Book.html

  • Does Oracle iStore 11i support integration with any analytics tool ?

    Hi
    We are planning to implement analytics with Oracle iStore 11i . However it seems like there is an integration possible with Oracle web analytics in R12. and there seems no such facility in 11i. Or is there one?
    Also is there there any means available in Oracle iStore 11i to integrate with external Analytics tools like Google Analytics.
    Thanks in Advance.
    Regards
    Srinivas

    Hello Srinivas,
    iStore introduces integration with Web Analytics in Release 12. There is no integration in Release 11i.
    We have no documented way for integration with the Google Analytics.
    Note that iStore allows users the flexibility to modify the jsp's to meet your business needs. Therefore, you could modifiy to enable tracking by Google Analytics.
    We do not have any seeded integration.
    Please advise on any additional questions.
    Thank you,
    Deborah Bourgeois, Oracle Customer Support

  • MM Integration with other modules

    Hello & thanks for being so quick in responding me ,
    Can someone help me with the integration of MM-PP,MM-QM, is there anymore modules apart from these 4 which interact with MM i mean SD FI QM & PP.

    hi
    FI-SD-MM Integration
    http://www.sap-img.com/financial/integration-of-fico-with-other-modules.htm
    http://www.sap-img.com/sap-mm.htm
    http://www.sap-img.com/sap-pp.htm
    http://www.sap-img.com/sap-qm.htm
    http://www.sap-img.com/sap-sd.htm
    nag

  • PS integration with other modules

    Hi Experts
    Pl tell me  from configuration point of view how ps integrates with MM , SD and FI. What are all the necessary steps we have to do in integration .
    Thanks in Advance

    Hi Amit,
    PS is integrated with all modules of SAP.
    MM and PS, we can create Purchase requisition in PS itself rather than doing in MM. This PR can be converted into Purchase order. To create PR in PS, we have to use the MM master data.
    SD and PS, we can check the revenues in PS. This can be done while creating the Sale order we have to give the WBS element.
    FI and PS:  We can provide the direct financial entries in FI to post cost to the project in PS by selecting the WBS element.
    I hope i clarified your query
    Regards
    Sankar

  • Integration with other flash chart product

    Hi,
    I am currently working on an APEX site development that utilize flash charts in some reports. However, the AnyChart product that is integrated with APEX is not sufficient in achieving the layout we desire.
    My supervisor is interested in another flash chart product called "FusionCharts". I would like to ask where would I find manual / instructions on how to create new components or alter the existing flash chart component in APEX so that FusionCharts can be used instead of the existing AnyChart.
    If anyone can share their integration experience of another flash chart product with APEX, I would greatly appreciate it.
    Thanks in advance for the help,
    Nelson

    Hi Nelson,
    You can't replace the current Anychart with FusionChart, but you can upgrade to a newer version of Anychart if you want.
    If you want to integrate FusionCharts, you add javascript and a flash file to your page and provide xml (for ex from a process) to it. I believe Scott Spendolini had these steps in his presentation of ODTUG, which you can download from that site.
    Regards,
    Dimitri
    -- http://dgielis.blogspot.com/
    -- http://www.apex-evangelists.com/
    -- http://www.apexblogs.info/

  • To use ADF with other Development tool

    Can I plug the the ADF framework into other development tools such as the IBM's[b] websphere studio and Borland's JBuilder?
    (Currently neither the WebSphere Studio nor the JBuilder, to the best of my knowledge, has the capability of the ADF has. Basically, with those tools you have to write a lot of codes to do the database updates, etc.)
    Thanks.

    ADF is a bunch of Jar files and the application is a bunch of Java and XML files - so yes you can take this and use any IDE to edit the files.
    But currently JDeveloper is the only tool that has the visual development environment for ADF.

Maybe you are looking for

  • Unable to record just audio with Mac Mini - no isight

    I am trying to use Podcast Capture on a mac mini connected to a generic monitor (no isight) and it is unable to initialize the audio subsystem. I am assuming this has to do with it needing a video camera, but surely that isn't required to record an a

  • After iOS 8 update, the "1" badge on settings won't go away. There is nothing actionable that I can find.

    After doing the update on my 5S, it appears the "1" badge over Settings will not go away. I've been through the settings menu multiple times and can't find anything actionable, looking for help. It's driving my OCD-self insane. I've turned the phone

  • Formula at the time of confirmation

    hello anybody pls help, my client is asking formula at the time order confirmation for scrap qty. l am explining the scenario. i have created BOM for FG. In that i have maintaing RM, scrap and packing materials and i have two operations for this. i h

  • Cannot be saved in function group XRSA

    Hello BI experts, I am new to BI Back-end coding. here is what I am doing: Compounding 0account hierarchies with EXIT_SAPLRSAP_004. when I tried to add a new include program, I am getting this warning: "Cannot be saved in the function group XRSA" Wit

  • How Do I Uninstall FCP?

    Pretty new at all of this. Need help from a pro. I have a FULL install of FCP on my G4 Powerbook. Just too much for me. Want to uninstall and then go back again and do a custom install of just Motion and LiveType. What is the best and fastest and cle