Wcs license upgrade issue

Dear all,
We have two 4400 controllers which support 50 Access points each and wcs with 100 base license.Now we added 5508 controller supports 50 access points.wcs is upgraded with another 50 ap license.The 5508 controller is joined to wcs and the licence showing permanent.WCS showing all aps and showing both 100 and 50 licence as permanent.
But the issue is while loging into the wcs it showing the error message as"The system is in violation of license.The number of APs registered is greater then licensed."
What might be the reason.Please help me.
Attaching the screen shot.
Thanks in Advance
Bose.

Because your WCS is still licensed for 100 APs ....
There are 2 license level : Base and PLUS.
You had a 100 AP Base license.
You bought a PLUS_UPG license which upgrade 50 out of your 100 AP count to PLUS.
Result : you now have 100 AP licensed on WCS, out of which 50 have the "PLUS" feature set.
You should have ordered a "BASE ap count 50" license. or if you want to go to plus, a "plus_UPG" license but for the 100, and then a plus ap count 50.

Similar Messages

Adobe Pro 9.0 Licensing / Upgrade issues

We have 15 users with 9.0, most of whom periodically experience the well known Error "Licensing has stopped working". The licensing repair tool does not fix for long nor does any of the other lengthy resolutions detailed in the licensing stopped working KB on adobe.com
My question -
1. How do I upgrade users from 9.0 to 9.5 if 9.0 no longer has any updates available? Will the 9.0 license cover this and how can I get media / install file as I can only find update files to an existing 9.5 file (we have tested a problematic user on a new version of Adobe and this is shown to resolve the issue)

Hi Stefan,
You can download the updates for Acrobat 9 from: Update, patch | Acrobat, Reader 7.x - 9.x | Windows
or : ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/
For licensing error please try the following:
Delete the Adobe PCD folder and caps.db file:
Windows: \Program Files\Common Files\Adobe\Adobe PCD
\Program Files\Common Files\Adobe\caps\caps.db
Launch Acrobat, enter the serial number and check.
Regards,
Rave

IDSM2 license upgrade issue

Hi folks,
i have to buy IPS license for my 2 IDSM-2 mosules in order to upgrade them from IDS to IPS.
I take a look to Cisco pricing list and i found 2 software code and i don't know what is the correct one: could you help me ?
1)CON-SU1-WS-IDS2K9
2)CON-SU1-WSIDSXLK9
3)CON-SU1-WIDSBNK9
What is the difference between them ?
I need to purchase IPS license for my IDSM-2 and signature update.
Thanks in advance,
regards,
MArco

You can apply the IPS-sig-S202-minreq-5.0-1.pkg Signature Update and all following signature updates to all 5.0(x) versioned sensors as well as the newly released 5.1(1) version.
These signature updates contain new signature definition parameters to support the new version 5.1(1) sensors. These new signature definition parameters are also seen on version 5.0(x) sensors, but are ignored if configured on version 5.0(x) sensors.
The sensorApp binary on the 5.0(x) sensors is updated during the signature update so that the new sensorApp can read in, and properly ignore those new signature update parameters. This was done so that a single IPS signature update file can be used across all version 5.x sensors.
The new signature definition parameters have been added in version 5.1(1) and are ignored if configured on version 5.0(x) sensors. Any signatures requiring these parameters do trigger on version 5.0(x) sensors.
Be aware of the following installation caveats:
You can apply the IPS-sig-S202-minreq-5.0-1.pkg Signature Update and all following signature updates to version 5.0(1), 5.0(2), 5.0(3), 5.0(4), 5.0(5), and 5.1(1) sensors.
However if you apply any of the signature updates to a 5.0(1) sensor, then you should not upgrade to the 5.0(2) or 5.0(3) Service Packs. Similarly, if you apply the signature update to a 5.0(2) sensor, you should not upgrade to the 5.0(3) Service Pack. The 5.0(2), and 5.0(3) Service Pack installations scripts do not carry forward the new sensorApp binary (CSCsb49911). Upgrading to 5.0(2) or 5.0(3) results in sensorApp generating errors while trying to read the new configuration, and prevents sensorApp from monitoring for attacks. For this reason the 5.0(2) and 5.0(3) Service Packs have been removed from CCO.
If you apply the signature update to a 5.0(1) sensor, you should upgrade to either 5.0(4) or 5.0(5) Service Packs, or 5.1(1) Minor Update. They do not have the CSCsb49911 issue.

WCS License Upgrade

Dear All
I am trying to upgrade a WCS running a plus license f 100 access point. with a base license of additional 50 access point.
the base license is already purchase, is there any workaround to do this?
please check attachment to see the error
Thanks,
Elie

Hi,
If WCS is licensed for the feature type - PLUS, only PLUS licenses can be added.
Whereas the license file you're trying to add is a BASE license which can't be stacked on top of a PLUS license. Hence the error reported by
thus the error.
For ex , WCS-PLUS-50 for plus while WCS-APBASE-50 is for base.
More info: http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html#wp9000106
CISCO WCS PLUS OPTIONS FOR EXISTING CUSTOMERS (WCS-STANDARD-K9, WCS-ENT-PLUS-K9, WCS-WLSE-UPG-K9)
• If you are an EXISTING Cisco WCS PLUS customer with a single server deployment
and want to increase the number of access points supported in your
network, order WCS-STANDARD-K9 and one of the Cisco WCS PLUS options
below:
WCS-PLUS-50: License supports up to 50 access points.
WCS-PLUS-100: License supports up to 100 access points.
WCS-PLUS-500: License supports up to 500 access points.
Note:
These are the same licenses ordered by new customers. Licenses are
additive and ordered in increments whether ordered for a new or existing
deployment.
Regards,
Madhuri

WCS licence upgrade issues

Hi,
My wcs current version is 6.0.196.0 with 50 aps licence.This licence was applied when wcs with 4.1.91.1 version which was base licence.Now with 6.0.196.0 vesion its showing as plus licence.I have to add another 50 plus licence to the existing wcs.But i am unable to add 50 plus because base licence is transformed to plus licence.Its is giving commant that you need base licence to add plus licence.
please help to come out of this mess........
Thanks in advance

Most likely your original license was "BASE+LOCATION" which now became PLUS.
Anyway, I'm not sure what is the current problem. If your only license is a PLUS, you need to buy an ap-count license for PLUS.
You can't mix base and plus.
Maybe a screenshot of your license screen ?

WCS base upgrade to PLUS license question

I have a 50 AP base WCS running. What kind if license do I need to order to be able to do location? These two have the same price, but can I upgrade to 100 WPLUS from 50 BASE by ordering the second one?
L-LIC-WPLUS-50
50 AP WPLUS license (Delivery via Email)
L-LIC-WPLUS-100U
50 to 100 AP WPLUS upgrade license (Delivery via Email)
Thanks,
Tao

You would need an upgrade license to go from base to plus.
CISCO BASE-TO-CISCO PLUS UPGRADE FOR EXISTING CUSTOMERS (WCS-PLUS-UPG-K9)
• If you are an EXISTING customer who wants to upgrade from a Cisco Base to Cisco PLUS license, order WCS-PLUS-UPG-K9 and select one of the Cisco WCS PLUS upgrade options below:
WCS-PLUS-UPG-50: License supports up to 50 access points. <---------------------
WCS-PLUS-UPG-100: License supports up to 100 access points.
WCS-PLUS-UPG-500: License supports up to 500 access points.
Note: The number of WCS-PLUS-UPG-K9 licenses purchased must equal or exceed the number of installed WCS Base licenses for the Cisco WCS to register as a Cisco WCS PLUS system. Thereafter, additional capacity is added by ordering PLUS licenses.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html

Failover fails (turns off) after License Upgrade for 5520s.

Hi-
I recently did a license upgrade on an active/standy pair of 5520's (8.04) for a 2 to 50 SSL VPN upgrade. According to Cisco Document #70390 it should have been a no brainer...but it wasn't. According to the doc upgrading the activation key of the primary then doing a wr mem along with a physical shutdown causes the secondary to become active. But in my experience as soon as the new activation key was entered failover broke. This caused the secondary to remain inactive and I had to reboot both to get the network back up (of course only one could be active and so I took the secondary offline so I could upgrade it via serial). So I brought the secondary up (after activation key upgrade) and failover did not kickin. I did a sh failover on both machines and both said failover was off. I would do the failover command on the primary and secondary...nothing. It wasn't until I did a no failover active on the secondary that failover finally started to work properly.
Anyone else have this experience? I have a ticket open with Cisco for the Doc # 70390 for clarification via my experiences. Any input would be appreciated on this. I was working on the assumption that I would have 2 to 3 minute outage as the primary rebooted but turned out to be a longer outage than anticipated and higher ups were pissed...
Thxs. --Rob.

Hi Rob,
Firstly - thanks for posting all your findings with this issue, otherwise I would have followed the Cisco doc too!
I just have a couple of queries though... after failover is disabled and the ASA's remain in their current state, rather than use the console port to perform the license upgrade, would the "standby" ASA still be assigned the 'standby' IP address, even though failover is disabled? For example, the active had the inside ip address 1.1.1.1 and the standby was assigned 1.1.1.2 on its inside interface. Would this configuration state be the same when failvoer was disabled?
The reason for asking, is whether the upgrade could be performed remotely (whether this is a sensible idea is another thing!). So could I connect to the "standby" unit by IP to upgrade the license?
The second query is regarding the reboot of both units (as opposed to shutting down). Following the license upgrade on both units, could you just reboot both units ("standby" then "active"), and when they both come back up, enable failover? I would assume the previous "active" unit would again become active and failover restored??
Thanks,
Tony

Wireless License Upgrade

I have a "AIR-LAP1131AG-E-K9" with 50 licenses.
Is it possible to upgrade for only 50 more licences ? (an not 100 like AIR-WCS-WLB-100EX)
Thanks

Here is a link to WCS license:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html

Confused on WCS Licnese Upgrade

I have one WCS running 7.0.164.0
It has a "plus" (permananet) license for 50 APs
I need to increase my AP count, so I have obtained an additional licnese for 100 APs from Cisco.
When I attempt to upload the new licnnese the WCS, I get an error telling me I must first have a Base License.
I would have thought that if the WCS initially came with a Plus license, then the Base License would already be included.
What am I missing ?

Dennis,
WCS licenses can't be mixed. The stacking would need to be happen in a certain order. In this case, since you already
have a PLUS license only PLUS licenses can be stacked on top of it. The right part for this would be WCS-PLUS-100 whereas you have been sold WCS-PLUS-UPG-100 (UPG is an upgrade license which goes only top of a BASE license). You would need to exchange this for the right number & then host the license to get it added to WCS.
Hope this Clarifies a bit.
Ram

Cannot Connect to VPN After License Upgrade

Hello,
I am having an issue where I can't connect to VPN after upgrading the license.
The license upgraded is related to AnyConnect VPN.
I noticed from the newly upgraded license, the Encryption-3DES-AES is disabled whereas previously it was enabled.
Could it be the cause of the issue?
ASA 5512-K9
Version 8.6(1)2
Thank you in advance.
Regards,
Zul

Hello,
It is,
here you have the link to request it for free
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
Regards

Certificate for 2 license upgrade has 1 s/n so 2nd license doesnt work

My user is running CS6 and purchased a 2 license upgrade for Design and Web Premium CS6 Upgrade and received the certificate with only one s/n. One system upgrades fine, but the second system acts like it is using shareware. It requires reinstallation every 30 days or so (verified with user and Tier 1 support - Help Desk). I am Tier 2 support, so I need to find out what is going on here.
I have been on the phone on hold for 1hr 56min effective this post, and have 30 minutes before my day is over. Since I am Govt., I can leave the phone on and running all day if need be.
So, why doesnt this thing work the way the Certificate (and my Help Desk) claims it should?

http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Mylenium

UCCX Enhanced License upload issues

I have a site that is under the gun to finish a UCCX migration from 4.0 to 7.0 We put in for the license upgrade using a PAK but when we load it the system tells us that it is not valid to upgrade using this file from "NONE" Generally that section tells you what files you already have if you add a feature license file.
We opened a case with TAC but in the meantime we loaded an NFR license file so we could start to configure the system. I then found a PAK for 4-5 to 7 for another site that is being closed. When I got that license file back and tried to run the set-up Wizard again, it tells me the new license is not a valid upgrade from Premium and will be ignored.
Does this mean I will never be able to get off the NFR license? Am I stuck on this license file even if I get my correct one tomorrow or the next day?
thanks

Yes, that is correct that you need the 4.x main system license plus the NEW upgrade license, but the main issue here was "What do I do if my system is running incorrect licensing?" And the answer is, you need to reset the flag for the Web GUI to Fresh Install and you need to delete the references to the existing license files. Both actions are done through the Windows on-board support tool accessed via Start-->Run
I would not recomend doing this the first time without TAC on the line, but if anyone else wants to provide the command you use to access this tool, feel free. It escapes me at the moment.

Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AM

HI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya

Report generation toolkit upgrade issues

I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi. Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore. What vi's do I need to replace these functions with to make this code work. Can anyone tell me what the work around is to solving this problem. This is a picture of the code.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor
Attachments:
code.JPG ‏92 KB

Hi BJD1613,
The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.
This was reported to R&D (CAR# 123064) for further investigation

EHP Upgrade Issue - Java Stack

Hi,
Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
Error log:
Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
I went through the following link , proceeded with option 2, But still getting same error.
Portal Upgrade Issue
Please advise the resolution for the issue I have.
Thanks in advance
Regards
Srinivas
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

Issue resolved

Wcs license upgrade issue

Similar Messages

Maybe you are looking for