WCS/Location Synchronization Error
I have a 4402 that was in demo status in my lab. I then moved it into production. While there were only minor changes such as IP, DNS, hostname, etc. to the 2710, WCS is a fresh install on another machine. When I attempt to synchronize the same 2710 with the new WCS, I get the following error:
A similar element was found in the Server. Please synchronize again to remove any disparities.
I have synchronized several times without success. Any ideas? I'm not open to re-doing the setup on either, so hopefully someone knows of a file on the 2710 that stores the information the error makes reference to and I can just erase it or overwrite it.
Regards,
Scott
Figured out a way to resolve the issue without having to blow away my Location Server:
1. Console or SSH into your box
2. Stop the location server by typing
command: /etc/init.d/locserverd stop
3. Go to the directory where the location server stores its location information
command: cd /opt/locserver/db/linux
4. Delete the current database WARNING: YOU WILL LOSE ALL CURRENT LOCATION DATA!!
command: rm -f server-eng.db
5. Reload the appliance
command: reboot
Hope this helps!
Regards,
Scott
Similar Messages
-
Synchronization Error Report without Error Description
using Windows Azure Active Directory Sync and receiving a Directory Synchronization Error Report for one user, but the error description is empty.
I checked the synchronization process with the miisclient program located in C:\Program Files\Microsoft
Azure Active Directory Sync\SYNCBUS\UIShell\miisclient.exe.
Error : InvalidSoftMatch
error code: 0x8023134a
I Click on the error and then on the "validate object against schema" I can see this message:
Required attribute 'cloudAnchor' is missing
What can/should I do?
Best regard,
Eyal Solomon.Before rerun the sync, set the ImmutableID on your msoluser with the code below :
$User
=
Get-ADUser
-Identity
"youruser"
$Guid
=
$User.ObjectGUID
$Upn
=
$User.UserPrincipalName
$ImmutableID
= [System.Convert]::ToBase64String($guid.ToByteArray())
set-msolUser
-userprincipalname
$upn
-immutableID
$ImmutableID -
Whitespace is not allowed at this location. Error while running CP using RDF with XML
Hi All,
I am using RDF report with output type as XML. It have following parameters:
1. Organization Name,
2. Invoice No From
3. Invoice No To
4. Date From
5. Date To
I had developed an RTF and registered that in Oracle Applications. The output comes in Excel file.
When I used to run report using Invoice Number From and Invoice Number To the report is giving normal excel output.
But when I am running using parameters Date From and Date To then XML output is coming after viewing output in CP Output button.
I downloaded that xml file. It is invalid as in the last of xml file it is showing following error message
"Whitespace is not allowed at this location".
Please let me know how can I resolve this problem.
Thanks in advance..
Regards
Sandipmy xml file looks like this....
<!-- Generated by Oracle Reports version 10.1.2.3.0 -->
<XX_ITEM_LOADING>
<LIST_G_BLANKET_NUMBER>
<G_BLANKET_NUMBER>
<CUSTOMER>SPS PVT LTD</CUSTOMER>
<INVOICE_NO>17356</INVOICE_NO>
<INVOICE_DATE>20-JUL-13</INVOICE_DATE>
<BUYER_REF>56780YP</BUYER_REF>
<ITEM_DESCRIPTION>XXCSD</ITEM_DESCRIPTION>
<NUM_OF_BEANS></NUM_OF_BEANS>
<CARIRER></CARIRER>
<SHIP_METHOD_CODE>UK568</SHIP_METHOD_CODE>
<MODE_OF_TRANSPORT>ROAD</MODE_OF_TRANSPORT>
<ASSEABLE_VALUE>1134534</ASSEABLE_VALUE>
<QUANTITY>149</QUANTITY>
<SOLD_TO>SPS PVT LTD</SOLD_TO>
<TAN_NO></TAN_NO>
<ST_REG_NO>943481</ST_REG_NO>
<EC_CODE></EC_CODE>
<TERMS>30 NET</TERMS>
<CUST_PO_NUMBER></CUST_PO_NUMBER>
<DESTINATION>LONDON</DESTINATION>
<CP_DAYS>3</CP_DAYS>
</G_BLANKET_NUMBER>
XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Whitespace is not allowed at this location. Error processing resource 'file:///C:/Users/sys/Downloads/cp_output_date_range....
<SOLD_TO>DKSP TECHNOLOGIES & ENGG(A DIV. OF PARROT SYSTEM LTD.)</SOLD_TO>
_METHOD_CODE> -
i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
Synchronization error after latest Blackberry Storm Upgrade
Hi from North Carolina!
I recently upgraded the OS on my Storm using the Desktop Manager. Since then I get a synchronization error as follows:
"Intellisync
Error encountered. Error code - 0x8004fceb.
Check documentation.
OK"
and it aborts the "processing device calendar".
I downloaded the desktop manager from Blackberry and reinstalled it, but continue to get the same error.
Can anyone help. It is greatly appreciated
Solved!
Go to Solution.Hi and welcome to the forums!
You have a corrupt record in the calendar:
Thanks,
Bifocals
This issue may be caused by one of the following:
One or more contacts in the Contacts application is missing information or has invalid characters in the First, Last, or Company name fields.
There are attachments in the Calendar application
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14818&sliceId=SAL_Pub...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Itunes wont install ,could not access network location %appdata% error?
itunes wont install ,could not access network location %appdata% error?
Let's try the following user tip with that one:
"Could not access network location %APPDATA%" install errors -
SCCM 2012 SP1 WSUS/Software Update Point Synchronization error on CAS.
Hi All,
Good day to all you.
I would like to seek all your help on this issue that i have encountering.
My SCCM 2012 SP1 CAS are having a synchronization error in WSUS/Software update point. The CAS have intergrated WSUS role in it. The last good synchronization was on July 16, 2014. No error log found on WCM.log and WSUSctrl.log
Error:
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall).
Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
Sync failed. Will retry in 60 minutes
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
below are wsyncmgr.log:
Setting sync alert to active state on site C01 SMS_WSUS_SYNC_MANAGER (0x1690)
Sync time: 0d00h01m14s SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Starting Sync SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Read SUPs from SCF for MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Found 1 SUPs SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Found active SUP MYHQKUL990707S.sdb.com from SCF File.
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:20.750 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:20 PM
5776 (0x1690)
Synchronizing WSUS server MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:21.763 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:21 PM
5776 (0x1690)
Using account sdb\SCCM-Admin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Synchronizing WSUS server myhqkul990707s.sdb.com ...
SMS_WSUS_SYNC_MANAGER 440 (0x01B8)
sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
440 (0x01B8)
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall). Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
All response is much appreciated
Thank YouHi,
I recommend you look at the IIS log. Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
We recently upgraded about 24 WLCs (4402s and 5508s) from 6.x to 7.0.98.0. In order to support these WLCs through WCS, we also need to upgrade the WCS to 7.0.164 which is currently running at 6.0.132.0 (Linux OS). Same is the case with Wireless Location Appliance 2700 to be upgraded as well. Wireless Management system has number of building maps with AP locations.
Prior to upgrade the WCS / Location appliance we need to take the backup of these building maps, already stored to export after the upgrade. Kindly let us know the directory where all these maps are being stored, as during upgrade we will loose all the stored data / maps.
Thanks for your kind assistance.
Regards.
ShujaHi Shuja:
Who says you're going to lose all your maps and stored data during a WCS upgrade? The installer for WCS 7.0.164.0 will see the 6.0.132.0 installation and upgrade it in place, modifying the existing data to work in the new 7.0 format. The installer for WCS 7.0.164.0 will even ask you if you want to make a backup of this data before the upgrade process even starts, although it would be a good idea to pull a backup of everything before you start. (One can never have too many backups, right?) The backup application in your existing install should be at /opt/WCS6.0.132.0/backup . Run that application and it will prompt you for a location to put the .nmsbackup file.
The .nmsbackup file that results from a WCS backup is what gives WCS its portability across platforms (physical/virtual) and operating systems (Windows/Linux). It's essentially the lifeboat of WCS, containing the database, the maps, the licenses and other supporting files.
Performing Maintenance Operations chapter of the WCS Configuration Guide:
http://tools.cisco.com/squish/08725
Sincerely,
Rollin Kibbe
Network Management Systems Team -
ActiveSync reporting generic "Synchronization error", anyone have any ideas?
I am using my Treo 700wx on my Windows XP Home desktop computer, and have in the past been able to sync with Outlook 2003. My wife recently purchased a new windows mobile smartphone and began using ActiveSync under her computer profile, and since then ActiveSync reports a generic "Synchronization error" message in the Activesync window when I place my Treo in the USB cradle. It does indicate that I am connected just fine. I redownloaded the most recent ActiveSync files from Microsoft (4.5.0) and used the repair option without success. I also upgraded my Treo Phone software to v. 1.22 - VZW also without any change in my ability to sync my data. Does anyone have any suggestions as to the next step?
Thanks.
Post relates to: Treo 700wx (Verizon)I have only seen a generic syncrhronization error when trying to do remote synchronization, so pretty much sounds like your device is trying to sync to a diff computer than that one it is connected to.
First simple check is to delete the partnership the device has with your computer and see if that helps
1. With the mobile device disconnected from your computer, start ActiveSync, click Delete Partnership on the File menu, and then click the partnership you want to delete.
2. Soft reset the mobile device. For information about how to do so, view the documentation that is included with your the mobile device.
3. IMPORTANT: When you perform this step, if you have data on your mobile device that is not yet on your computer, you should choose Combine when you receive a message that asks what you want to do with existing data on the mobile device.
Connect your mobile device to your computer, and then modify your initial settings by using the New Partnership Wizard. Note that the New Partnership Wizard automatically starts after you connect your mobile device.
Message Edited by HardBeatZ on 07-06-2008 10:21 PM -
RMAN-10011: synchronization error while polling for rpc 8, action=startdefa
Could anybody explain what is this error message caused by?
TIA
The entire spool below:
051107064744: NetBackup RMAN Backup Started
ORACLE_SID=db02
backup_type=cold
number_of_channels=2
Started by: Oracle
051107064745: Checking database status
051107064745: Database status: OPEN
051107064745: Getting database password
051107064746: Checking database password
051107064746: Database password: Valid
051107064746: Checking Database mode
051107064746: Database mode: NOARCHIVELOG
051107064746: Shutdown no archive
051107064838: RMAN BACKUP STARTED
Recovery Manager: Release 10.1.0.4.0 - 64bit Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: db02 (DBID=3504436532)
RMAN> connect catalog *
2> run
3> {
4> sql 'alter session set sort_area_size=12582912';
5> sql 'alter session set sort_area_retained_size=1048576';
6> allocate channel t1 type 'SBT_TAPE' parms="ENV=(NB_ORA_POLICY=ORA_solcdi02, NB_ORA_SERV=sun4)"
7> format 'df_%d_%p_%u_%t';
8> set limit channel t1 maxopenfiles=1;
9> allocate channel t2 type 'SBT_TAPE' parms="ENV=(NB_ORA_POLICY=ORA_solcdi02, NB_ORA_SERV=sun4)"
10> format 'df_%d_%p_%u_%t';
11> set limit channel t2 maxopenfiles=1;
12> backup database filesperset=64
13> include current controlfile;
14> sql 'alter database open';
15> release channel t1;
16> release channel t2;
17> }
18>
connected to recovery catalog database
starting full resync of recovery catalog
full resync complete
sql statement: alter session set sort_area_size=12582912
sql statement: alter session set sort_area_retained_size=1048576
allocated channel: t1
channel t1: sid=160 devtype=SBT_TAPE
channel t1: VERITAS NetBackup for Oracle - Release 5.1 (2004122521)
allocated channel: t2
channel t2: sid=159 devtype=SBT_TAPE
channel t2: VERITAS NetBackup for Oracle - Release 5.1 (2004122521)
Starting backup at 11-MAY-07
channel t1: starting full datafile backupset
channel t1: specifying datafile(s) in backupset
input datafile fno=00005 name=/oradata/10gid/u01/grid102/grid102/mgmt.dbf
input datafile fno=00006 name=/oradata/10gid/u01/grid102/grid102/mgmt_ecm_depot1.dbf
input datafile fno=00007 name=/oradata/10gid/u01/grid102/grid102/system02.dbf
input datafile fno=00004 name=/oradata/10grid/u01/grid102/grid102/users01.dbf
channel t1: starting piece 1 at 11-MAY-07
channel t2: starting full datafile backupset
channel t2: specifying datafile(s) in backupset
input datafile fno=00008 name=/oradata/10ggrid/u01/grid102/grid102/mngmecm02.dbf
input datafile fno=00001 name=/oradata/10ggrid/u01/grid102/grid102/system01.dbf
input datafile fno=00002 name=/oradata/10ggrid/u01/grid102/grid102/undotbs01.dbf
input datafile fno=00003 name=/oradata/10ggrid/u01/grid102/grid102/sysaux01.dbf
channel t2: starting piece 1 at 11-MAY-07
channel t2: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_19ihecmm_622277334 comment=API Version 2.0,MMS Version 5.0.0.0
channel t2: backup set complete, elapsed time: 00:06:05
channel t2: starting full datafile backupset
channel t2: specifying datafile(s) in backupset
including current controlfile in backupset
channel t2: starting piece 1 at 11-MAY-07
channel t2: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_1aihed24_622277700 comment=API Version 2.0,MMS Version 5.0.0.0
channel t2: backup set complete, elapsed time: 00:00:35
channel t1: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_18ihecmm_622277334 comment=API Version 2.0,MMS Version 5.0.0.0
channel t1: backup set complete, elapsed time: 00:06:48
Finished backup at 11-MAY-07
Starting Control File and SPFILE Autobackup at 11-MAY-07
piece handle=c-3404436532-20070511-00 comment=API Version 2.0,MMS Version 5.0.0.0
Finished Control File and SPFILE Autobackup at 11-MAY-07
sql statement: alter database open
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-10010: error while checking for RPC completion
RMAN-10011: synchronization error while polling for rpc 8, action=startdefault
Recovery Manager complete.
051107065708: RMAN BACKUP FAILED, RMAN exit status=1
051107065708: Cleaning log file (removing passwords)
051107065709: Error Log Check
051107065837: Rman Stat Generator
051107065956: Backup Html Generator
051107065956: NetBackup RMAN Backup Finished
######################################################Check on metalink:
RMAN-10011: synchronization error while polling for rpc 3, action=startdefault
Note:429572.1
Werner -
"The exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812aeb" - error displayed when opening PDF files. What i do?
What is your Reader XI version?
Have you tried to disable Protected Mode [Edit | Preferences | Security (Enhanced)] ? -
Synchronization error CRTranDB::AddNew : Duplicate record Id - FFFFF99B
I very recently upgraded to the new Blackberry Desktop Software for my Torch 9810. the transition seemed to go well, I did a number of syncs w/o problems. This morning I suddently received the sync error in the subject line, which is preventing me from completing a sync. Help?
Syncing w/ Microsoft Outlook
MattHello,
To resolve the synchronization error "CRTranDB::AddNew : Duplicate record Id", please backup your BlackBerry® smartphone and clear the Address Book All database.
The following KB articles provide the steps to backup and to clear the Address Book All database.
"How to back up data on a BlackBerry smartphone" http://bbry.lv/IWfPl0
"How to clear the user content databases from the BlackBerry smartphone" http://bbry.lv/JtQKcw
Once the Address Book All database has been cleared, please try to synchronize again.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Need information about synchronization error of stat file in BW system
Since we registered an IFS file named stat in /usr/sap/<SID>/DVEBMGS00/ as a part of object replication for MIMIX, we frequently experience a synchronization error by CPI3728:object has been changed. We need to solve this issue not to occur an object synchronization error in production operation point of view. I'd very much appreciate if someone could provide a hint or tips to avoid this situation.
Sincerely,Hi Yuhko,
The stat file contains info for performance/monitor used in Tcodes like STAD. Do you really need it? We are using Mimix for ECC 5.0. And we configure the following:
/USR/SAP/PRD/DVE* *EXCLD
As long as the directory structures are same on both sides, it should work. (Not 110% sure of /sec subdirectory because we just configured a temp SSL certificate)
Thank you,
Victor -
AddOnRegDataGen.exe - Unable to Locate Component ERROR
Hi to all,
After upgrading to 2005 (6.80.123)SP:00 PL:07 i tried to install my custom made addons but got "AddOnRegDataGen.exe - Unable to Locate Component" error while generating an ard file. It looks like it can't find xerces-c_2_4_0.dll for some reason, but this dll in fact is in C:\Program Files\SAP Manage\SAP Business One directory. I notieced that during first upgrade, i used default destination folder which turned to be C:\Program Files\SAP not C:\Program Files\SAP Manage , so what i did is re-insalled software in C:\Program Files\SAP Manage folder. But still no luck. Please advise.anyone? heeelp
-
Hi,
Has anyone seen the 9800 BB Torch Synchronization Error, CRTranRec::GetModifiedInfo : Modified Infor not available?
I look forward to your thoughts,
Regards,
JeffreyI'm sorry to get back to you so late.
What organizer on your computer are you sychronizing with (Microsoft® Outlook® for example)? Do you get this message specifically when trying to perform a synchronization or a backup?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Maybe you are looking for
-
[Urgent] How to let FileAdapter to read next file after a customized period
Dear friends, We are using SOA Suite 11.1.1.5 and use FileAdapter in BPEL Process to read files. The file adapter in BPEL Process need to handle 14 inbound different files every batch time. And we want to let File Adapter to start reading next file a
-
Missing $10 certificate for Xbox One Sunset Overdrive Console bundle
Hello, I am missing my $10 certificate for pre-ordering the Xbox One Sunset Overdrive bundle. I pre-ordered the console on-line on 9/1, and I picked up the console in-store on realease day on 10/28. It's been well over 20 days for the certificate to
-
Adobe Flash plug-in not working in Safari
I was trying to use s broadcasting stations player, and it asked for installation of a newer version of Flash. I have downloaded and installed the newest V 16 of Flash but it does not work on the broadcaster's player. However I can play back the cont
-
Object name not found error after upgrading to Visio 2013
Hello, I have a C# application which uses the Visio drawing control. I have been working on making it compatible with Visio 2013. I get an error using Visio 2013 which I did not get using Visio 2010. The error is a COMexception: Object name not found
-
WDS Client throwing error 0x80070570 every time it trying to deploy OS.
HI I have WDS and DHCP on subnet A and Clients on Subnet B. DHCP has server options of 66 set to wds server IP Address and 67 set to \boot\x64\wdsnbp.com. I have not setup option 60. When i try to boot a client from WDS it get ip address and starts t