WCS MAC FILTER TABLE
Does anyone know how to export the mac filtering table from WCS 7.0.230.0, to a csv file?
thanks
nev
I have just usually run this command on the CLI of the WLC:
show macfilter summary
Sent from Cisco Technical Support iPhone App
Similar Messages
-
Howto refresh MAC-filter list in WCS ?
Hello
We?re using WLC4402 with WCS 4.
We are using MAC filters with WPA to limit which clients can connect.
My problem is this:
I think it is smoother to insert new MAC filters through the WLC web interface instead of using the WCS.
When I do this the new MAC filters I put in through the WLC web interface will not show up in the WCS, how can I refresh the WCS to make the new MAC filters show up there ?
/DanMake sure the controller is using version in Release 3.2.78.0.If not upgrade the controller so that updates are sent properly to wCS .Max number of mac filter that could be configured is 512 on WCS 2.2
-
Question regarding 'local menu | Filter Table' option.
I have a long sheet (1000+ entries) that has customer names in a column. There is over 200 distinct customers in this column. However, when I choose the above option, it only shows 25 names.
Is this a known limit? If so, is it possible to change the names that show on the list, so the most frequent / common names are shown?
Just looking for a quick on-the-fly quick filtering which I do dozens of times per day.
P.S Trying to switch from Excel for Mac which does have this capability.
Thanks
NickI am just wondering if there is a hard limit of 25 entries that are shown, no matter how many different names there are.
It appears that the maximum number is 25 entries in the dropdown filter list. However, you can filter on any value you want via Edit Table Filters in the dropdown or by clicking the Filter icon upper right.
SG -
Simple WCS Mac filtering not functioning!
Hello forum,
We have just deployed WLC and WCS with couple of lightweight AP.
We decide to employ MAC filtering to restrict wireless client.
We noticed a SERIOUS problem, once we removed a mac address from the WCS and apply to controllers, Wireless client with that mac address are still able to access(ping,dhcp) the network even though its mac is removed from the currnt local mac filter after around 10mins???
Is there a know bug to this issue? or it requires some moment for the changes to take effect.Hi all,
problems solved. session-timeout is causing the client to maintain the session after mac removal.
Cheers,
Kelvin -
Mac Filter Wildcards? WLC
I'm deploying several hundred handheld scanners and I dont want to create a mac filter for everyone, however that are all the same manufacturer, and that manufacturer only has one mac prefix, is there a way to just put the mac prefix in? I'm using 5508's running 7.0.116.0.
Help files and searches turned up nothing.
Thanks.My problem is the opposite. I would like to ban / disable mac address begining to a given manufacturer because:
- my wireless clients are of the same manufacturer
- someone is scanning repeatly during months with hundreds of different fake mac address -but all of them begining with 00:0e:8e- and they are highly populating the excluded client table.
I suppose there is no solution for that until now
Thanks,
Jose -
What am i missing?
pixfirewall# show mac-address-table
^
ERROR: % Invalid input detected at '^' marker.
[EDIT: karat is under the A in mac ]
pixfirewall# sh ver
Cisco PIX Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(3)
Compiled on Thu 07-Aug-08 19:42 by builders
System image file is "flash:/image.bin"
Config file at boot was "startup-config"
pixfirewall up 175 days 11 hours
Hardware: PIX-525, 256 MB RAM, CPU Pentium III 600 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : address is 000d.28f9.62a5, irq 10
1: Ext: Ethernet1 : address is 000d.28f9.62a6, irq 11
2: Ext: Ethernet2 : address is 000d.8810.a620, irq 11
3: Ext: Ethernet3 : address is 000d.8810.a621, irq 10
4: Ext: Ethernet4 : address is 000d.8810.a622, irq 9
5: Ext: Ethernet5 : address is 000d.8810.a623, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has a Restricted (R) license.
Serial Number: 807234146
Running Activation Key: 0x6ab205ba 0x986d4239 0xf56523af 0x76f3d58b
Configuration last modified by enable_15 at 12:58:08.130 EDT Thu May 16 2013
pixfirewall# show mac-address-table
^
ERROR: % Invalid input detected at '^' marker.Hi,
Command Modes The following table shows the modes in which you can enter the command:
Command Mode
Firewall Mode
Security Context
Routed
Transparent
Single
Multiple
Context
System
Privileged EXEC
Source:
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/s4.html#wp1448364
- Jouni -
how do i set up my kindle to receive audio books? Is there a MAC filter? it must be disabled and I dont know how to do this
By default, any type of MAC filtering is disabled on the AirPort base stations ... unless, of course, you or someone else enabled it.
If it is enabled, to disable it, you would use the AirPort Utility.
AirPort Utility > Select the AirPort > Manual Setup > AirPort > Access Control tab > MAC Address Access Control: Not Enabled -
Problem with connetction to wrt54g2 via wireless connection with WPA/WPA2 & wireless MAC filter
Hello,
I'm Alexey from Novosibirsk, Russia.
I have a problem with connection to wrt54g2 from my DELL D630 notebook via wireless connection. When I setup WPA/WPA2 in wireless security and wireless MAC filter I can't connect from notebook to WRT - in Windows I see that dynamic IP address from WRT is not assigned. When I switch off security mode to disable always OK, but I need a wireless security between DELL and WRT.
Connection via cable Ethernet port is OK.
Can You help me?Have you tried the different laptop...?
Download 1.71 MB the firmware for WRT54G2 v1 and reflash the router's firmware.After reflashing/upgrading the router's firmware,reset the router for 30 seconds and reconfigure the router from scratch. -
RUN Time error while use filter table in query generator
Hai..
I have 2 Functions under "Scalar valued functions" in SQL Server,i try to call this functions in Query generator its working fine,result also display correctly, but i click filter table system showing Error Message " Run Time Error,Abnormal program termination" then SAP is get closed,i tested this scenario in 3 Database am getting same error , Is this BUG in SAP B1?There is no error number in error messageThis is my function
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date, ,>
-- Description: <Description, ,>
-- =============================================
ALTER function [dbo].[Get_TransObjName](@Obj_type NUMERIC(20,5))
returns varchar(500) as
BEGIN
DECLARE @Obj_type_Name varchar(100)
select @Obj_type_Name =
case @Obj_type
when -2 then 'Opening Balance'
when -3 then 'Closing Balance'
when 1 then 'oChartOfAccounts'
when 2 then 'oBusinessPartners'
when 3 then 'oBanks'
when 4 then 'oItems'
when 5 then 'oVatGroups'
when 6 then 'oPriceLists'
when 7 then 'oSpecialPrices'
when 8 then 'oItemProperties'
when 12 then 'oUsers'
when 13 then 'A/R Invoices'
when 14 then 'A/R Credit Memo'
when 15 then 'A/R DeliveryNotes'
when 16 then 'A/R Returns'
when 17 then 'oOrders'
when 18 then 'A/P Invoice'
when 19 then 'A/P Credit Memo'
when 20 then 'Goods Receipt PO'
when 21 then 'Goods Returns'
when 22 then 'PurchaseOrders'
when 23 then 'Quotations'
when 24 then 'IncomingPayments'
when 25 then 'Deposit'
when 28 then 'oJournalVouchers'
when 30 then 'JournalEntries'
when 31 then 'oStockTakings'
when 33 then 'oContacts'
when 36 then 'oCreditCards'
when 37 then 'oCurrencyCodes'
when 40 then 'oPaymentTermsTypes'
when 42 then 'oBankPages'
when 43 then 'oManufacturers'
when 46 then 'VendorPayments'
when 48 then 'oLandedCostsCodes'
when 49 then 'oShippingTypes'
when 50 then 'oLengthMeasures'
when 51 then 'oWeightMeasures'
when 52 then 'oItemGroups'
when 53 then 'oSalesPersons'
when 56 then 'oCustomsGroups'
when 57 then 'ChecksforPayment'
when 58 then 'Stock List'
when 59 then 'Goods Receipt'
when 60 then 'Goods Issue'
when 64 then 'oWarehouses'
when 65 then 'oCommissionGroups'
when 66 then 'oProductTrees'
when 67 then 'Inventory Transfers'
when 68 then 'oWorkOrders'
when 69 then 'Landed Costs'
when 70 then 'oCreditPaymentMethods'
when 71 then 'oCreditCardPayments'
when 73 then 'oAlternateCatNum'
when 76 then 'Postdated Deposit'
when 77 then 'oBudget'
when 78 then 'oBudgetDistribution'
when 81 then 'oMessages'
when 91 then 'oBudgetScenarios'
when 97 then 'oSalesOpportunities'
when 93 then 'oUserDefaultGroups'
when 101 then 'oSalesStages'
when 103 then 'oActivityTypes'
when 104 then 'oActivityLocations'
when 112 then 'oDrafts'
when 116 then 'oDeductionTaxHierarchies'
when 117 then 'oDeductionTaxGroups'
when 125 then 'oAdditionalExpenses'
when 126 then 'oSalesTaxAuthorities'
when 127 then 'oSalesTaxAuthoritiesTypes'
when 128 then 'oSalesTaxCodes'
when 134 then 'oQueryCategories'
when 138 then 'oFactoringIndicators'
when 140 then 'oPaymentsDrafts'
when 142 then 'oAccountSegmentations'
when 143 then 'oAccountSegmentationCategories'
when 144 then 'oWarehouseLocations'
when 145 then 'oForms1099'
when 146 then 'oInventoryCycles'
when 147 then 'oWizardPaymentMethods'
when 150 then 'oBPPriorities'
when 151 then 'oDunningLetters'
when 152 then 'oUserFields'
when 153 then 'oUserTables'
when 156 then 'oPickLists'
when 158 then 'oPaymentRunExport'
when 160 then 'oUserQueries'
when 162 then 'Inventory Valuation'
when 163 then 'oCorrectionPurchaseInvoice'
when 164 then 'oCorrectionPurchaseInvoiceReversal'
when 165 then 'oCorrectionInvoice'
when 166 then 'oCorrectionInvoiceReversal'
when 170 then 'oContractTemplates'
when 171 then 'oEmployeesInfo'
when 176 then 'oCustomerEquipmentCards'
when 178 then 'oWithholdingTaxCodes'
when 182 then 'oBillOfExchangeTransactions'
when 189 then 'oKnowledgeBaseSolutions'
when 190 then 'oServiceContracts'
when 191 then 'oServiceCalls'
when 193 then 'oUserKeys'
when 194 then 'oQueue'
when 198 then 'oSalesForecast'
when 200 then 'oTerritories'
when 201 then 'oIndustries'
when 202 then 'oProductionOrders'
when 203 then 'A/R Down Payment'
when 204 then 'A/P Down Payment'
when 205 then 'oPackagesTypes'
when 206 then 'oUserObjectsMD'
when 211 then 'oTeams'
when 212 then 'oRelationships'
when 214 then 'oUserPermissionTree'
when 217 then 'oActivityStatus'
when 218 then 'oChooseFromList'
when 219 then 'oFormattedSearches'
when 221 then 'oAttachments2'
when 223 then 'oUserLanguages'
when 224 then 'oMultiLanguageTranslations'
when 229 then 'oDynamicSystemStrings'
when 231 then 'oHouseBankAccounts'
when 247 then 'oBusinessPlaces'
when 250 then 'oLocalEra'
when 280 then 'oSalesTaxInvoice'
when 281 then 'oPurchaseTaxInvoice'
when 300 then 'BoRecordset'
when 305 then 'BoBridge'
when 260 then 'oNotaFiscalUsage'
when 258 then 'oNotaFiscalCFOP'
when 259 then 'oNotaFiscalCST'
when 261 then 'oClosingDateProcedure'
when 10 then 'oBusinessPartnerGroups'
when 278 then 'oBPFiscalRegistryID'
else cast(@Obj_type as char(20)) end
return @Obj_type_Name
END -
Wireless MAC filter can not be active to connect to WIFI?
I use a Linksys router with WEP security and a Wireless MAC filter. When I turned off WEP I was unable to connect to the router with my iphone 3g but when I enabled WEP and turned off the MAC filter I connected right away.
Has anybody else seen this or has anyone successfully connected to a router with a MAC filter?
ThanksI have no problems connecting to a router with MAC filtering enabled... I would just double check that you entered the correct MAC address into your router (Settings>General>About>Wi-Fi Address) and make sure the permissions are set correctly for that MAC address (if applicable)...
-
Hi,
I like to use the Sort Filter Table function (right click on the Matrix, plus the SAP icon to be activated) in my Add-On, Matrix.
Could you please provide me the code?
Thank you,
RuneHi Szymon Lipnicki,
I will open a new Forum ticket, because I cannot give you 10 points in this ticket anymore...
I will post a new ticket and please drop your answer in the new ticket. The Subject is "Filtering User Matrix"
Thank you very much, this is good news!!!
Thank you,
Rune -
WRT160N wireless MAC Filter settings reset on their own
I recently purchased and setup a WRT160N router. Having no real problems with router - it works fine with exception of the MAC filter settings. I most often access the router config from an XP machine (used to initially setup the router) which is wired, as well as from a VISTA notebook that is wireless. I am noticing that when I check the MAC filter settings, the previous setup is missing - meaning that all MAC addresses are gone, and the filtering option is removed.
I have set this up numerous times, and VERIFIED that I click on save at the bottom of the page, verify I have enable checked, etc. I am wondering if there is something I'm missing - the settings don't appear to "stay" - the filtering option simply disappears and returns to disabled. I may answer my own question here (or point myself in the right direction), but is there a dependancy on some other setting that is causing my filter to "disappear" on me?Have you tried to reset your Router and Re-configure all the settings back on your Router? If not then Reset your Router and re-configure all the settings. If still doesn't work, then you need to upgrade the firmware of your Router. Download the latest firmware for your Router from the Linksys website, Go to http://www.linksysbycisco.com/US/en/support/wrt160n/downloads and select the proper version number of your Router and download and save the firmware on your computer.
Login to the Routers GUI and click on the Administration tab and below click on the sub tab "Firmware Upgrade" and click on the browse button and select the firmware file and click on upgrade...Once the firmware upgrade is successful... Then you need to Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... -
CNA 5.5 and show mac address-table
When trying to Monitor/Search for MAC address in C2960 network I got an error reply that a CLI command is not supported. Analyzing network traffic shows that CNA 5.5 is issueing 'show mac-address-table' command but the latest Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(55)SE does not support 'show mac-address-table' anymore but does support 'show mac address-table' command. How can I change the command for showing mac address tables in CNA 5.5?
M.hi john,
the show mac-address-table command should be valid.
check if you've got MAC learning enabled on the ASA interface using show mac-learn command.
edit: could you post show firewall? the above command works on transparent firewall only. -
Structure of Filter-tables in BW7.0?
Hi,
i'm actually not in access of an BI7.0-System and i like to develop some Filter like they are used in 7.0. Can someone please give me the Tablestructure of the 7.0 filter Tables and maybe a hint if they are accessible in 3.5 as well?
thanks - i will assign points for structure...If you search on Google, there are couple of threads answering the same and here are the first three in the list,
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:941629680330
How to compare two oracle database schemas
http://www.red-gate.com/products/oracle-development/schema-compare-for-oracle/
HTH
Aman.... -
How to create an entry in Badi Filter table T77HAP_FLT_PRP
How to create an entry in Badi Filter table T77HAP_FLT_PRP
Hello Rahul,
Filter types should be created on badi implementations ( in transaction se19 )
Read my answer on this thread :
Re: BADI:Filter type un editable
I hope it helps.
Bulent
Maybe you are looking for
-
Problem during Content Conversion
Hi People, I have a content conversion scenario, where my input is a flat file. There are certain values which are blank in my fields. However, in my resultant XML, I need to view these blank spaces enclosed within the respective XML tags. But, I do
-
Stack overflow user profile doesn't display correctly
The page of Stack overflow user profile is wrongly displayed, blank space on top of page and some info is hidden.
-
Tv @nywhere PRO and vista SP1
hello my media center doesn't work with VISTA SP1 and a TV@nywhere pro ,if i come back to vista standart, it works again. simply the media center starts, but when i select tv for source it remains in loading with the logo on screen. think i need a p
-
Alpha channel data with layered format plugin
I have a layered format plugin and I am trying to write the alpha channel information separately. I have set up channelPortProcs and I am attempting to read the pixel data with readPixelsProc. The issue is that even though the readPixelsProc function
-
How to find duplicates in bods
how to find duplicates in bods