WCS Maps - Heat Signatures on multiple floors

I have a APs setup in my 11 story building on all the even floors starting with floor 2.  I have added the maps for all 11 floors into a building setup in our WCS.  However I am not seeing the heat signatures on the odd floors in which I would expect to see them after putting in the right dimensions in the building/floor config(s).  Is there something I am missing in order for the heat signatures to show up on the odd floors from the even floor APs?  Below is info on my equipment/software:
WCS 6.0.170.0
AP Type
CAPWAP
AP Model
AIR-LAP1252AG-A-K9
IOS Version
12.4(23c)JA
Thanks in Advance!

Hi Jeremy,
heatmaps are not calculated in 3 dimensions. WCS can't know your floor height, neither the attenuation of the floor so it can't compute on a floor the heatmaps of APs placed on other floors.
Hope this clarifies.
Nicolas
===
Don't forget to rate answers that you find useful

Similar Messages

  • Obsticles moving within WCS MAP Editor

    I have an issue whereby I import a floor plan into WCS and then open the map editor and draw over the map the wall obsticles so as to have the heat maps and RF predictions reflect the attenuation characteristics of the walls.
    I save the map and at a later date reopen it only to find that the obsticle layer has moved or offset to the map. Considering that the floor layouts I have been editing are in some cases 40,000 sq meters in area, the number of walls to re draw constitutes major work.
    I picked this problem up originally when my heat maps would suddenly be cut off mid room where the was no obvious obsticle. On opeing up the map editor I find that the overlay is offset by the same amout of the error in the heat maps.
    The maps in question, beign floor layouts have nopt been moved in reference to their offset to their respective building plan.
    The versions of code I am runnign is as follows:-
    WCS: 7.0.164.0
    MSE: 7.0.105.0
    WLC: 7.0.98.0

    No mention of the number of obstacles. I too am very detailed on my map layouts. The only thing they came back to me was that I may have been inaccurately drawing the obstacles by not magnifying the floor plan enough. This was a bit of an insult.
    I have had situaltions whereby I can open a map one day and it is out of sync, and next it appears fine ( or almost).
    I also have problems whereby i cannot get to the lower right portions of the floor plans when magnified as it is off the screen. I currently have 9 major hospital campuses with numerous buildings in each, some with up to 12 floors. Each floor layour is as detailed as I can possibly make it, and the thought of re doing these maps is somethign i just do not want to go to!
    What the TAC finally got me to do was to tunr on logging and record when instances happened. The only problem here is that if you do not know or cannot repeat an instance of teh map going out of sync, how do you record the logging.
    As I stated, I have basically given up on finding a resolution as I think it goot all too hard for Cisco to identify the actual issue.

  • MSE location problem in WCS map

    Hi,
    I've Installed a MSE context aware services   6.0.103 and WCS  6.0.196.0 plus loaction license in a Campus with 4 WLC  in 2 buildings, every buildings has 3 floor, i configure the WCS and associate the campus to MSE engine, I syncronize it with controllers and  It works, but only for the ground floor of the buildings, on the other floor there are many clients but they are not visible on WCS map, I can view associated clients only on the groundfloor maps, and  i check the properties of every floor but they are the same.
    any ideas?
    thanks
    Regards

    Hello,
    Are the groundfloors all covered by APs on the same controller(s) and maybe the other floors covered by APs on different controllers?
    Or are the same controllers having APs on either the groundfloor and other floors?
    I am asking this because we may be running into a situation where the MSE doesn't correctly communicate with the controllers managing APs (and clients) on the floors where you can't see anything.
    Also, is the MSE license having still free slots, or is the license limit completely consumed by all the clients in the groundfloors?
    This can be verified in WCS under
    Services > Mobility Services > [your MSE] > Context Aware Service > Administration> Tracking Parameters
    After these first checks, I'd also verify the following:
    1. The client on a specific floor should show up on the WLC under
    show client detail
    2. The same client should show up on WCS through a search for its MAC address.
    Is the WCS pointing you to a specific map location for this client?
    3. In WCS, under Monitor > Maps, do you see a client count higher than zero for those floors where you can't display clients?
    4. In the floor map view of WCS, could you please confirm that you checked the "Clients" box and that in its properties you also selected "Show All Clients"?
    I understand these may sound like obvious steps, but I'd prefer not to neglect anything.
    Regards,
    Fede
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • Oddball WCS map issue !? help please

    Hi,
    have tried to create a perimeter on WCS map editor as a test to keep some of the assets from appearing way off the map. It made no real difference. Problem is to remove the perimeter I selected new perimeter (which erases last perimeter) and saved with no new perimeter hence going back to standard (or at least this was the only way i could see to do it)
    Now, the maps are done within a "building" as 3 floors. Even though I only chose to edit the top floor when I try to find ANY ward level out I get:
    [ServletException in:/pages/monitor/map/buildingView.jsp] Cannot find bean Floors in any scope'
    Seems to be a java error?
    So Now I cannot find any maps or Access Points on maps either L
    Will stopping and starting the WCS database kick this process back into life? 
    I have already stopped and started jave.exe on the server to no success. I have tried locally browsingon the server to no success and various pc`s and get the same message.
    I use a asset tracking piece of software from aeroscout that relies on the ap posistions from WCS and it is still working ? so in the background the information for maps and ap`s locations are still there, i would normally stop and start WCS but this may upset my aeroscout software.
    any ideas ? I REALLY dont want to have to replace 350 AP`s on a map again it took days and i need to be running by next week.
    my version is:
    Wireless Control System Version 5.0.56.2

    1. Stop WCS services
    2. Make a backup of your DB
    3. Start WCS services
    See if problem has been fixed.
    If the issue is still the same, upgrade to WCS 5.2 latest version, that should fix your problem.

  • MSE not showing 7921 phone on WCS map

    Hi,
      We just installed MSE with CAS (7.0.201.204 software)  and everything works fine and clients are shown on WCS floor maps except for Cisco 7921 wireless phones which dont appear in the WCS map. Has anybody come across this issue ? Any tips on troubleshooting this ?
    regards
    Joe

    Joe,
         I haven't seen this be an issue per say, although I have seen where the WCS map is set to only show either 802.11b/g or 802.11a and the clients were using the other protocol. If you configure WCS map to show both 802.11a & 802.11bg clients then you should see the 7921 phones.
         Also make sure that the MSE is configured to track clients.
    HTH

  • WCS Map Editor Don't Load

    Hi.
    I have a 7.0.172.0 versipon of a wcs.
    I´m trying to create a new floor and then edit the maps of my building's floors but I only see a white image on the map editor. I've already tried  with png and jpg, also i've tried reducing dpi from 96dpi to 72dpi but i always get the white image.
    I have another Floor creating ealier in the same version of wcs and the strange thing is that a image that is ok for editing but img is loaded in the dwg (autocad) format. I 've tried to convert jpg to dwg but have no luck. Previw image is showing ok but in the map editor is still a white paper. Please help.

    I can publish cad file from autocad to pdf but having an error (not supported format) when I have tried to load PDF in the Floor Editor.
    I have tried to load jpg image in very low res - no success - preview is showing but in map editor still "white paper".

  • Signatures at multiple positions in the PDF

    Signatures at multiple positions in the PDF. This is mainly a Verification & Validation document,
    where signatures will be applied for each Test case present in the document(4 to 5 signatures in a single page).
    We have observed that applying a signature for one place involves lots of steps and saving of file each time.
    This leads to lot of effort when we have to perform 500+ signatures for a single document.
    So do we have any mechanism to get the pre-stored signature with a single button?
    Note:
    We are using Acrobat 11(Adobe Reader 11)
    Steps that we are using for getting a signature are:-
    Precondition:(Steps involved in creating Signature)
    Steps involved in placing the signature:(It will be performed each time a signature is placed)
    Click on Place the Signature button
    Identify the location for the signature
    Enter the password
    Click on OK
    Save the file
    Thanks
    Deepak

    From the steps that you described it looks to me that you are using digital signatures. As TSN already noted digital signatures apply to the whole document, not to individual parts of it (like specific pages). The signature appearance exists just as a visual aid to make it obvious for the reader of the document that it is signed. It does not matter on which page a signature appearance is placed.
    You can automate the process of signing the document with multiple signatures with JavaScript if you know ahead of time which signing credentials you want to use for each signature, where to place it and with which name to save. To do that you need to be familiar with the JavaScript programming and Acrobat JavaScript API (it is part of the Acrobat SDK which you can download from adobe.com). You can also Google "Acrobat JavaScript API" for more info on specifics.

  • How to map idoc segments to multiple output structures

    Dear experts,
    On Pi I need to map segments from an Idoc to 2 different outputstructures. My scenario is as follows:
    incoming Idoc on PI -> if segment eq 'X' then map to outputstructure '1'; if segment eq 'Y' then map to outputstructure '2'
    Idoc structure is as follows:
    - 1 header segment
    - 1..n detail segments (which I need to map to outputstructure 1)
    - 1 summarisation segment (which I need to map to outputstructure 2)
    Output needs to be a .txt file.
    I would like to use the graphical message mapping on PI, how can I map the Idoc to multiple output structures?
    Thanks in advance,
    William

    Hi
    You can do 1:n multimapping
    in message mapping in messages tab ..add both the structures in target tab and do the mapping
    and in operation mapping add both the message interface on the target side
    PLease go through this blog
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

  • JAX-WS mapping one servlet to multiple URLs

    Hi. I have a JAX WS web service define like this:
    package yohoo;
    import javax.jws.WebMethod;
    import javax.jws.WebService;
    @WebService
    public class Foo
      @WebMethod
      public String doSomething()
        return "done";
    }And I attempted to map the web service multiple time on web.xml:
    <servlet>
      <servlet-name>FooWS</servlet-name>
      <servlet-class>yohoo.Foo</servlet-class>
    </servlet>
    <servlet-mapping>
      <servlet-name>FooWS</servlet-name>
      <url-pattern>/one/FooWS</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
      <servlet-name>FooWS</servlet-name>
      <url-pattern>/two/FooWS</url-pattern>
    </servlet-mapping>However when I tried to request the WSDL via the second mapping I got an exception (JBoss 7). Is this a feature that should be supported or am I doing something totally wrong?
    javax.servlet.ServletException: Cannot obtain destination for: /TestWS/two/FooWS
         org.jboss.wsf.stack.cxf.RequestHandlerImpl.findDestination(RequestHandlerImpl.java:164)
         org.jboss.wsf.stack.cxf.RequestHandlerImpl.handleHttpRequest(RequestHandlerImpl.java:81)
         org.jboss.wsf.stack.cxf.transport.ServletHelper.callRequestHandler(ServletHelper.java:169)
         org.jboss.wsf.stack.cxf.CXFServletExt.invoke(CXFServletExt.java:87)
         org.apache.cxf.transport.servlet.AbstractHTTPServlet.handleRequest(AbstractHTTPServlet.java:185)
         org.apache.cxf.transport.servlet.AbstractHTTPServlet.doGet(AbstractHTTPServlet.java:113)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:734)
         org.jboss.wsf.stack.cxf.CXFServletExt.service(CXFServletExt.java:135)
         org.jboss.wsf.spi.deployment.WSFServlet.service(WSFServlet.java:140)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:847)

    Just to close the loop on this (and for the next person trying to figure out how to do it), I was able to [extend X509KeyManager as described in Alexandre Saudate's blog|http://alesaudate.com/2010/08/09/how-to-dynamically-select-a-certificate-alias-when-invoking-web-services/] . I was then able to set the com.sun.xml.ws.developer.JAXWSProperties.SSL_SOCKET_FACTORY on my JAX-WS request context to use my custom SSLSocketFactory, and it works like a charm!
    Thanks,
    Bill

  • WCS Map planning mode issue

    WCS Map planning mode issue:
    Hi ,
    we try to set AP planing mode in WCS with actual obastacle rail other editing featue in planing mode but when we genarate planning we can't get edit map .
    how can we solve this issue .
    thanks and regards
    Robin

    What browser are you using?  There are some compatibilty issues with some browsers like google chrome. I use chrome to view WCS, but firefox to manage/plan mapping.

  • WCS- Map Editor (moving floors)

    Problem: Two people working on the same WCS created the same building with different names. One building has two floors and the other has two floors. Rather then delete and start over is there a way to move a floor to a different building? Or is deleting and recreating the only option (a pain since mulitple APs have already been placed)
    tia
    barry

    What you can do is go to the maps section, properties, and then export the AP placements. This gets saved in CSV form.
    Then, delete everything but the APs in question. Change the building & floor name from X to Y (Y being where you want it to be), and then import this file. WCS will move the APs to the new position. You have to upload the floor maps, and give the floors the same dimensions, but this saves you the trouble of re-positioning the APs.

  • WCS Map editor offsetting walls

    Hi,
    WCS version: 7.0.230.0.
    I import a map to WCS then open Map Editor, scale the floor and then draw the walls. But the next time (for example the next day) I open Map editor the walls have moved about 1-2 meters. Often to the left and/or up. This mess up my RF predictions.
    I have tried Internet Explorer 8, Chrome, latest FireFox. Om rare occations the walls are in their correct place, but most often not.
    Anyone had this problem and got a fix for it?
    //Philip

    I have experienced this exact problem before in WCS 7 a couple of years back and we are not the only ones it seems: https://supportforums.cisco.com/thread/2040769
    I now run NCS 1.1 and this problem is still not resolved, all the walls in my drawn maps gets offset a couple of meter messing up my RF predictions.
    I would also really like to find a fix for this or know what I might do wrong.
    //Markus

  • Cisco WCS Map Editor- Any suggestions???

    Does anyone here on the forum have any suggestions to make the Map Editor function in Cisco's WCS easier to navigate??  I have been trying to set the "light walls" on the floor plan I uploaded and it keeps coming out a mess.  Also, when I am done adding the interior walls how do I stop editor for outlining?
    Any suggestions would be great.  Ready to scream!
    Thank you.
    Rgds,
    Vicky

    I used to double click the mouse when i finish drawing  a wall it seems to work but yea it is quite hard. You should be able to click save button on top of the editor to stop and you can outline. Is that what you want to know?
    cheers

  • WCS map quality

    I was wondering if anyone has found a way to import floor maps without destroying thier quality?
    I am running WCS 4.2.62.0. My images start as cad dwg files. I have tried importing them with no luck. I have had our construction mgmt team strip the drawings down to a single layer and still the room numbers are unreadable when imported into wcs. The only way I have found to get some drawings to look decent is to convert the dwg to pdf, zoom in on the pdf copy and paste that into paintshop, covert it to grayscale. colorreplace everything to black and save that as png or jpg and import.
    I have 130plus buildings to import. Any help on this is greatly appreciated.

    Hi britjroyse
    I'm have the same issue, do you have any further details on the bug yet? or a ID of some kind that I can view?
    I'm trying to setup locationing and having low quality maps just doesn't work.
    Many thanks

  • WCS Maps - Utilization

    Hi all, Hope all is well :)
    I have a new building with a floor of wireless enabled. Have imported the map and it is on the WCS.
    Thing is, the view of the map shows that there are no clients associated on any of the APs. When I change the view, it shows all my APs as 20-30% utilsation.
    Is this a bug? How else can I get AP stats without the WCS?
    Many thx indeed,
    Ken

    I have mate, and there we no clients ???
    Also, just trying to look at the profile traps I am receiving, I am getting a lot of Interference traps (no clients connected as I say) and I know the threshold is set low to the default of 10%.
    but
    what is the graph on the WLC showing me, for the Interference by Channel
    What is the meaning of the blue bar per channel and the red one per channel?
    Im a tad confused.
    Thx to all :)
    Ken

Maybe you are looking for