WCS not synchronising with WLC automatically

HI Experts .
I have 5508 WLC with 7.0.98.0 software version and WCS with 7.0.172.0 version .
I have a problem of synchronisation of the configs . Automatic sync is not working .I have scheduled the synchronisation but the same is getting failed .
But if i try to do the sync manually it is working .
Can anyoe please help me to know what can be the cause of the issue .
Regards
Angus

HI George ,
Thanks for your quick response .
Can you please share me the bug ID .
Regards
Angus

Similar Messages

On the keyboard shortcut that I have created on my iPhone, do not synchronise with my iMac.

On the keyboard shortcut that I have created on my iPhone, do not synchronise with my iMac.
The document and it are setting in iCloud on my iPhone and my iMac is check marked properly.
Please help me rectify this problem.
This used to work perfectly in the past.
Thank you
Cyrus

Did you take it to an apple genius bar or any apple ceritified repair center?

I cancel my itune payment reasonly because I'm not happy with the automatic mentho purchase on my credit card. And now I have a problem to update the app

I'm cancel my itune pay ment so now they won't let me update all my app. What's happen, I
Not happy with the automatic payment system with ur apple.
Tina

Tinango wrote:
Not happy with the automatic payment system
What is wrong with paying for something at time of purcahse?

Sent items on yahoo Imap not synchronising with sent items on yahoo mail outlook 2011

I had a problem where the my yahoo imap which I set up with Outlook 2011 was not synchronizing with Yahoo from the web.
I found the solution today by switching from Sent items( Server) to Sent( Server).
1. Go to tools
2. Accounts
3.Advance options
4. Folders
5. Then you will see sent. Drop down the window and you will see what I have shown in the screen shot below.
It worked for me and now all my emails are synchronising very well.

the last sentence should read...."this folder do however only have the sent emails that was sent from my imac, and not the emails that was sent from my ipad".
I want all my sent items on all my devices the same, in other words the should come from the server and not the specific device I'm using

Cisco CAP 3702I not registered with WLC 5508.

I Have WLC 5508 in my network. Now i need to add another 2 no of cisco CAP 3702I in to my network. But we got the following errors
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 01:27:25.359: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to handle capwap control messag
e from controller
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap p
acket from 10.56.200.201
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 01:27:25.359: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to handle capwap control messag
e from controller
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap p
acket from 10.56.200.201
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.

Your WLC seems to be running version 7.3 which is not supported with 37xx AP platform.
You need to run WLC with version 7.6.100.0 onwards to support these new AP's.
For more details check the Wireless Software Compatibility Matrix.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

NCS 1.1.3.2 not compatible with WLC Code 7.6 ?

Hello,
i have updatet my WLC 2504 Controllers. I want to applie a new wlan template. But I get only the error message:
"Reason: SNMP operation to Device failed: "
The SNMP Reason is empty....(See attachment)
I work with "Cisco Prime Network Control System". Is this out of date?
I have seen the Version of "Cisco Prime Infrastructe" is newer from date?
Can anyone help me?

Unfortunately, there is no update for the PI 2.1? The month is already around. Any news on this?
On the Cisco Wireless Solutions Software Compatibility Matrix show that PI 2.1 is not compatible with 7.6.x.x ?

WLC 2106_AP-1131_dell vostro 14 v3446 wifi not working with WLC

Hi,
I'm facing issue with newly purchased Dell laptops(dell vostro 14 v3446) are not able to join in WLC.
I have check WLAN profile for these laptops ,all mapped correct,but laptops not able to join the same profile.
Only one(newly purchased) laptop is working fine with WLC profile,remaining laptop all config is same but not getting connected with WLC.
Laptop wifi is working with another vendor APs.
But this particular profile working with my exciting user's laptop perfectly.
WLC/-AIR-WLC2106-K9-Firmware version—6.0.199.4
AP-AIR-LAP1131AG-A-K9.
Please advice me here to resolve this problem.
regards,vijesh
This was posted in lieu of blog https://supportforums.cisco.com/node/12292096 which was deleted since questions should be questions as discussions as not as blogs ;-)

Hi Leo,
Thanks for your response.
Client laptop trying to connect the SSID and once authentication key entered ,it will try for a while then error message come "could not connect...."
As our suggested,i will create new profile with open authentication,then try to connect the laptop.
we have planned to upgrade WLC firmware in coming weekend.

BT Yahoo Calender does not synchronise with my iphone or ipad

My BT yahoo calendar has stopped synchronising with my ipad and iphone5
Have tried all the usual solutions i.e. going to settings and deleting my yahoo account and then reinstalling but it is not working
On the ipad the calendar has completely disappeared from my calendar app
Can anyone help or is this a problem at the Yahoo end?

See section 5 of TS1538: iOS: Device not recognized in iTunes for Windows.
tt2

Eclipse - debug step is not synchronise with source code.

Hi,
I have an web application witch run on tomcat, when Idebug the application, the debug steps are not synchronize with the source code. Same thing when I change the code , after making the jar file and putting it in the WEB-INF/lib of the web application, the modifications didn't take place. It seem that the old code always remains. I looked at the compile class in the jar file and the modifications have been taken in to account.
what can cause this kind of behavior ? I relaunch tomcat many times without succes ?
any help ? thanks a lot.

Can it be the case that you compile your JAR optimized, i.e. without debug information? Then your classes are also without debug information.
This sounds very likely as a refresh problem. Be sure that both source files in Eclipse and class files in Tomcat have the same version (e.g. with simple system.out).

HT2969 Why does my iCal dates not synchronise with Blackberry?

Please help; I have a Blackberry Bold 9700 and I downloaded on my MacBook Pro the Mac Version of Blackberry Desktop manager to be able to synch with my iCal events on my Macbook Pro. The synch works however every All-Day event is being put into my Blackberry calendar a day later than it is meant to be. I tested an Entourage event; imported it into iCal and then synchronised and then it was on the right day. The problem is I need to use iCal as my primary point of event entry because I use it with my iPad.
Has anyone experienced this and found a way around it?

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Cisco AIR-LAP1041N-E-K9 not working with WLC 4402 version 7.0.116.0

Hi All,
appreciate your support for a problem i started facing today. i have a Cisco WLC 4402 running version 7.0.116.0 and it is working great with 25 Cisco 1252 APs. we have recieved a new 20 Cisco 1041N APs today and i installed one in our site but it doesn't work. it worked fine and loaded the image from flash and got the WLC ip address through DHCP option and started showing the below error:
*Mar 1 00:00:10.021: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:10.033: *** CRASH_LOG = YES
*Mar 1 00:00:10.333: Port 1 is not presentSecurity Core found.
Base Ethernet MAC address: C8:9C:1D:53:57:5E
*Mar 1 00:00:11.373: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:11.465: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1088 messages)
*Mar 1 00:00:11.494: status of voice_diag_test from WLC is false
*Mar 1 00:00:12.526: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.594: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.647: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 13-Apr-11 12:50 by prod_rel_team
*Mar 1 00:00:13.647: %SNMP-5-COLDSTART: SNMP agent on host APc89c.1d53.575e is undergoing a cold start
*Mar 1 00:08:59.062: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:08:59.138: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:08:59.837: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:09:00.145: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:09:09.136: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e
*Mar 1 00:09:17.912: %PARSER-4-BADCFG: Unexpected end of configuration file.
*Mar 1 00:09:17.912: status of voice_diag_test from WLC is false
*Mar 1 00:09:17.984: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:09:19.865: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:09:19.886: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:09:20.873: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:09:20.874: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
Translating "CISCO-CAPWAP-CONTROLLER.atheertele.com"...domain server (172.16.40.240)
*Mar 1 00:09:29.029: %CAPWAP-5-DHCP_OPTION_43: Controller address 172.16.100.102 obtained through DHCP
*May 25 08:27:02.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:02.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:03.175: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:03.177: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:03.177: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:03.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:03.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:03.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:03.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:03.448: status of voice_diag_test from WLC is false
*May 25 08:27:14.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:14.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:15.185: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:15.186: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:15.186: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:15.330: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:15.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:15.334: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:15.334: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:15.450: status of voice_diag_test from WLC is false
*May 25 08:27:26.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:26.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:27.182: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:27.183: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:27.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:27.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:27.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:27.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:27.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:27.433: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 25 08:27:27.446: %PARSER-4-BADCFG: Unexpected end of configuration file.
*May 25 08:27:27.447: status of voice_diag_test from WLC is false
*May 25 08:27:27.448: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*May 25 08:27:27.456: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*May 25 08:27:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:38.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:39.183: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:39.184: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:39.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:39.326: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:39.329: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:39.329: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:39.330: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:39.446: status of voice_diag_test from WLC is false
*May 25 08:27:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:49.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:50.179: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:50.180: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:50.180: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:50.323: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:50.326: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:50.326: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:50.326: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:50.425: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 25 08:27:50.438: %PARSER-4-BADCFG: Unexpected end of configuration file.
i searched for the regulatory domains difference between AIR-LAP1041N-E-K9 and AIR-LAP1041N-A-K9 and didn't find any difference that may affect the operation of this AP.
just to mention that our configuration in WLC for regulatory domains is:
Configured Country Code(s) AR
Regulatory Domain 802.11a: -A
802.11bg: -A
My question is, should i only include my country in the WLC (IQ) to add the requlatry domain (-E) to solve this problem? or changing the country will affect the operation of all working APs??
Appreciate your kind support,
Wisam Q.

Hi Ramon,
thank you for the reply but as shown in the below link:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7.0.html#wp233793
the WLC in version 7.0.116.0 supports Cisco 1040 seiries APs.
Thanks,
Wisam Q.

Redundancy not forming with wlc

Hi,
We have two wlc 5508 running vers 7.4.100.60. They are not forming redundancy pair & are in maintenance mode.
Both RP's are connected physically direct.
Few outputs are given here:-
(WLC01) >show redundancy summary
Redundancy Mode = SSO ENABLED
     Local State = MAINTENANCE
      Peer State = UNKNOWN - Communication Down
            Unit = Primary
         Unit ID = 2C:11:5A:5F:C7:00
Redundancy State = Non Redundant
    Mobility MAC = 2C:11:5A:5F:C7:00
Maintenance Mode = Enabled
Maintenance cause= Negotiation Timeout
Redundancy Management IP Address................. 10.32.25.11
Peer Redundancy Management IP Address............ 10.32.25.12
Redundancy Port IP Address....................... 169.254.25.11
Peer Redundancy Port IP Address.................. 169.254.25.12
(WLC02) >show redundancy summary
Redundancy Mode = SSO ENABLED
     Local State = MAINTENANCE
      Peer State = UNKNOWN - Communication Down
            Unit = Secondary - HA SKU
         Unit ID = 10:B3:21:3C:01:B0
Redundancy State = Non Redundant
    Mobility MAC = 10:B3:21:3C:01:B0
Maintenance Mode = Enabled
Maintenance cause= Incompatible Software license
Redundancy Management IP Address................. 10.32.25.12
Peer Redundancy Management IP Address............ 10.32.25.11
Redundancy Port IP Address....................... 169.254.25.12
Peer Redundancy Port IP Address.................. 169.254.25.11
(WLC01) >show license summary
License Store: Primary License Storage
StoreIndex: 0 Feature: base                              Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 0 Feature: base-ap-count                     Version: 1.0
        License Type: Evaluation
        License State: Active, Not in Use, EULA not accepted
            Evaluation total period: 8 weeks 4 days
            Evaluation period left: 8 weeks 4 days
        License Count: 500 / 0 (Active/In-use)
        License Priority: None
(WLC02) >show license summary
License Store: Primary License Storage
StoreIndex: 0 Feature: base                              Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 0 Feature: base-ap-count                     Version: 1.0
        License Type: Evaluation
        License State: Active, Not in Use, EULA not accepted
            Evaluation total period: 8 weeks 4 days
            Evaluation period left: 8 weeks 4 days
        License Count: 500 / 0 (Active/In-use)
        License Priority: None
In addition, other errors are also seen during the process.
Starting Redundancy: Starting Peer Search Timer of 120 seconds
Cannot open the file /mnt/application/ha/InheritedApCount.txt
Cannot open the file /mnt/application/ha/InheritedApCount.txt
Please help with all possible suggestions. thanks in advance

Hi,
i cant see that you have permenant AP count license on both.
review the following document for licensing requirement on AP SSO
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml#licensing

Access points not registering with WLC

Hi all,
I have a 5508 WLC in LAG mode and have 14 1231G WAPs connected to it already. However I still have to migrate 9 more WAPs from my old 4404 controller to the new 5508 controller. I cannot get remaining 9 WAPs to register with new WLC. I found following debug message from the WLC. My WLC license is valid for 50 APs. Have any of you guys seen this? What am I doing wrong here? Any lead is much appriciated.
I have LAG setup with 2 ports out of 8 ports. Don't understand why it's giving error of not having enough capacity.
Any advice is much appriciated. Thanks in advance.
*spamApTask4: May 21 18:58:29.468: 00:23:04:c9:72:00 Echo Timer Expiry: Did not receive heartbeat reply from AP 00:23:04:c9:72:00 (10:4:12:26/36602)
*spamApTask0: May 21 18:58:50.588: 00:13:60:7e:28:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50,joined Aps =14
*spamApTask0: May 21 18:58:50.588: 00:13:60:7e:28:30 Refusing Discovery Request from AP 00:13:60:7e:28:30 - no AP manager with available capacity
*spamApTask0: May 21 18:58:50.588: 00:13:60:7e:28:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50,joined Aps =14
*spamApTask0: May 21 18:58:50.588: 00:13:60:7e:28:30 Refusing Discovery Request from AP 00:13:60:7e:28:30 - no AP manager with available capacity
*spamApTask0: May 21 18:59:00.589: Could not find BoardDataPayload
*spamApTask0: May 21 18:59:00.636:
*spamApTask0: May 21 18:59:05.593: Could not find BoardDataPayload
*spamApTask0: May 21 18:59:05.639:
*spamApTask0: May 21 18:59:53.564: 00:13:60:7e:28:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50,joined Aps =14
*spamApTask0: May 21 18:59:53.565: 00:13:60:7e:28:30 Refusing Discovery Request from AP 00:13:60:7e:28:30 - no AP manager with available capacity
*spamApTask0: May 21 18:59:53.565: 00:13:60:7e:28:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50,joined Aps =14
*spamApTask0: May 21 18:59:53.565: 00:13:60:7e:28:30 Refusing Discovery Request from AP 00:13:60:7e:28:30 - no AP manager with available capacity

Guess the SSC got corrupted..
Run the command "debug pm pki enable" on the WLC, copy the SSC and paste it on the WLC and see if that helps.. here is the link to do the same!!
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

Blackberry will not synchronise with Laptop

I have a 9320. It stopped receiving emails and I had to re-install my email address on the device to solve the problem. Now it no longer synchs with Outlook on my laptop. Software is Desktop Manager 7.1 Bundle 1319. I get an error message "0x80040fb3", asking me to refer to my documentation. What documentation? This cryptic code means nothing to me. What do I do next?
As an aside I would like to add that there seems to be no way (living in South Africa at least) of contacting RIM and asking my question. I have tried visiting RIM via google and they do not have a section of their web page which offers contact details of anyone or any agent in their organisation whom I can approach with queries. If anyone reading this lives in South Africa and knows the answer to this general 'beef' please let me know.

Bergvliet wrote :
I have a 9320. It stopped receiving emails and I had to re-install my email address on the device to solve the problem. Now it no longer synchs with Outlook on my laptop. Software is Desktop Manager 7.1 Bundle 1319. I get an error message "0x80040fb3", asking me to refer to my documentation. What documentation? This cryptic code means nothing to me. What do I do next?
Hi Bergvliet
Welcome to BlackBerry Support Forums
Please check this Knowledge Base article regarding this error you recieving and try those resolution mentioned to resolve your issue:
KB16153 : "Error 0x8004fd28" displays during calendar synchronization using BlackBerry Desktop Manager.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

AP does not associate with WLC

the wlc send the log:
Feb 11 10:31:48.263 spam_lrad.c:1048 LWAPP-3-DISC_INTF_ERR1: Ignoring discovery request received on non-management interface (2) in L3 LWAPP mode
Any Idea? I review the network configuration and all is fine, I have 3 AP associate without problems but Im trying to add two more and send this log, from the same swithc.

The AP 1242 in this port is working fine:
interface FastEthernet3/7
switchport access vlan 105
switchport mode access
spanning-tree portfast
The AP 1242 in this port does not associate:
interface FastEthernet3/8
switchport access vlan 105
switchport mode access
spanning-tree portfast
The APs are the same and the configuration is the same but one works fine and the other dont.
any Idea?

WCS not synchronising with WLC automatically

Similar Messages

Maybe you are looking for