WCS Report to find b vs g clients?

Recent discussion on the Educause wireless-lan email list (
http://listserv.educause.edu/cgi-bin/wa.exe?A0=WIRELESS-LAN ) has suggested that many people are getting much better thruput on their 2.4 GHz networks by dropping support for the "b" data rates of 5.5 an 11 Mbps. (Also the 1 and 2 Mbps rates, but we'd disabled them a while ago.)
The thinking is that by now most clients have "g" capable hardware, yet the wireless system still might operate in "mixed b+g" mode, which is slower, if b isn't disabled.
But, before I turn the b rates off, I wanted to check to see how my current clients are connecting. I can't find anything on the Reports page that shows the connection speeds being used. Is there a way to get this data?
Also, is disabling the 1, 2, 5.5, and 11 Mbps speeds the right way to turn off support for b, or is there a different setting?
I have a pair of 4402 WLCs, so I'm stuck at version 7.0.230.0 for my WCS, if that makes a difference in the answer.
Thanks,
Steve

Scott,
Thanks so much for taking the time to reply -- I was looking through all the reports, when the "protocol" column is right there on the Monitor Clients page. Simple!
I hadn't thought of looking directly on the WLC, either; probably a good habbit to develop for tricker stuff.
Happly, none of our 2.4 GHz users seem to be using the "802.11b" protocol, so I guess I can disable it without causing any disruption. (Though I'll wait and make the change Monday AM rather than late Friday evening :-)
Cheers,
Steve

Similar Messages

Report to Find different between PCR & Schemas

hi guru's,
Can Any tell me the Report to Find different between PCR & Schemas in Two Clients,(For examle from 4.7 to 6.0)
Regards,
Bala

Hi Bala,
The following link will help you.
PCR and SCHEMAS
Thanks & Regards,
Sandip Biswas

WCS reporting -128db

I have a WISM LWAPP deployment with 4 WISM blades (2 are for backup), 400 1231 and 1242 AP's. I use WCS to monitor the WLAN. My problem is tracking down why stationairy clients are frequently reporting through WCS a -128db signal strength when the client is located less than 50 feet from an AP. This is happening on all SSID's and in multiple buildings. It does not happen to all of the clients on a given AP, and does not seem to happen on all clients. It happens at random times. My thought is that WCS only polls clients every 10 minutes (I changed this from the default 15 minutes) so the signal loss indicated by -128db is probably happening much more frequently. This is happening to iPAQ's, tablets, symbol mc70's, laptops both windows and MAC.
I am also seeing very high MIC and FCS error counts.
Any suggestions on a command to monitor a client to see whats goiing on.
Thanks

You can use the WCS navigator. The Cisco WCS Navigator provides network administrators with easy, cost-effective access to information from multiple geographically diverse Cisco WCS management platforms. This innovative platform allows network managers to partition the unified wireless network at the management level.

Report to find open items and close items for given vendor

Hi All,
What are the steps needed to write a REPORT to find out
open and close items for a given vendor.
Which are the fields i'll have to take and what are the comparisons i'll have to make.
I know,
BSIK is for open Vendor &
BSAK for closed Vendors..
what are the conditions i'll have to check.
Thanks in Advance..
Pradeep Alex

Hi Pradeep,
This report I developed is definitely useful to you.
*& Report ZFI_PROV_IT_VENDOR
REPORT ZFI_VENDOR.
TYPE-POOLS: slis.
tables: BKPF,
        BSEG,
        bsik,
        bsak,
        bsid,
        bsad,
        lfa1,
        t005u,           "Region Description
        J_1IMOVEND.
TYPES: BEGIN OF ty_bkpf,
        bukrs type bkpf-bukrs,
        belnr TYPE bkpf-belnr,
        gjahr type bkpf-gjahr,
        blart TYPE bkpf-blart,
        budat TYPE bkpf-budat,
       END   OF ty_bkpf.
types: begin of ty_J_1IMOVEND,
         lifnr     type lfa1-lifnr,
         J_1IPANNO type J_1IMOVEND-J_1IPANNO,
         J_1ICSTNO type J_1IMOVEND-J_1ICSTNO,
         J_1ISERN type J_1IMOVEND-J_1ISERN,
       end   of ty_J_1IMOVEND.
TYPES: BEGIN OF ty_bseg,
        belnr TYPE bseg-belnr,
        gjahr type bseg-gjahr,
        bschl TYPE bseg-bschl,
        umskz type bseg-umskz,
        shkzg type bseg-shkzg,
        wrbtr TYPE bseg-wrbtr,
        hkont type bseg-hkont,
        lifnr TYPE bseg-lifnr,
       END   OF ty_bseg.
types: begin of ty_t005u,
        bland type t005u-bland,
        bezei type t005u-bezei,
       end   of ty_t005u.
types: begin of ty_lfa1,
        lifnr type lfa1-lifnr,
        name1 type lfa1-name1,   "35
        ort01 type lfa1-ort01,   "35
        ort02 type lfa1-ort02,   "35
        pfach type lfa1-pfach,   "10
        pstlz type lfa1-pstlz,   "10
        regio type lfa1-regio,   "3
        stras type lfa1-stras,   "35
        ktokk type lfa1-ktokk,
        telf1 type lfa1-telf1,   "16
        telf2 type lfa1-telf2,   "16
       end   of ty_lfa1.
types: begin of ty_bsik,
        bukrs type bsik-bukrs,
        lifnr type bsik-lifnr,
        augdt type bsik-augdt,
        augbl type bsik-augbl,
        belnr type bsik-belnr,
        budat type bsik-budat,
        blart type bsik-blart,
        shkzg type bsik-shkzg,
        wrbtr type bsik-wrbtr,
       end   of ty_bsik.
types: begin of ty_bsid,
        bukrs type bsid-bukrs,
        lifnr type bsid-kunnr,
        augdt type bsid-augdt,
        augbl type bsid-augbl,
        belnr type bsid-belnr,
        budat type bsid-budat,
        blart type bsid-blart,
        shkzg type bsid-shkzg,
        wrbtr type bsid-wrbtr,
       end   of ty_bsid.
types: begin of ty_out2,
        lifnr type bsik-lifnr,
        wrbtr type bsik-wrbtr,
        end of ty_out2.
types: begin of ty_out,
        lifnr type lfa1-lifnr,
        name1 type lfa1-name1,
        addr(162) type c,
        J_1IPANNO type J_1IMOVEND-J_1IPANNO,
        J_1ICSTNO type J_1IMOVEND-J_1ICSTNO,
        J_1ISERN type J_1IMOVEND-J_1ISERN,
        opbal type bseg-wrbtr,
        purch type bseg-wrbtr,
        PAYM type bseg-wrbtr,
        grdeb type bseg-wrbtr,
        othdeb type bseg-wrbtr,
        othcre type bseg-wrbtr,
        tds   type bseg-wrbtr,
        bal   type bseg-wrbtr,
        blart type bkpf-blart,
        bschl type bseg-bschl,
       end of ty_out.
types: begin of ty_bsegtemp,
        lifnr TYPE bseg-lifnr,
       end   of ty_bsegtemp.
types: begin of ty_bsegnew,
        wrbtr TYPE bseg-wrbtr,
        lifnr TYPE bseg-lifnr,
       end   of ty_bsegnew.
data: it_bsik type table of ty_bsik with header line,
      it_bsid type table of ty_bsid with header line,
      it_bsak type table of ty_bsik with header line,
      it_out2 type table of ty_out2 with header line,
      it_out3 type table of ty_out2 with header line.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv,
       it_listheader TYPE slis_t_listheader,
       it_alvevent TYPE slis_t_event,
       gt_events TYPE slis_t_event WITH HEADER LINE.
DATA: I_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA : wa_fieldcat TYPE slis_fieldcat_alv,
       wa_listheader TYPE slis_listheader,
       wa_alvevent TYPE slis_alv_event.
DATA: WA_SORT TYPE SLIS_SORTINFO_ALV.
DATA: ls_line TYPE slis_listheader.
DATA : g_repid LIKE sy-repid,                  " Program ID
       g_layout TYPE slis_layout_alv.           " Layout Workarea
DEFINE m_fieldcat.
wa_fieldcat-col_pos       = &1.               " Fieldcat column postion
wa_fieldcat-fieldname     = &2.               " Field name
wa_fieldcat-DO_SUM        = &3.
wa_fieldcat-seltext_m     = &4.               " Column Text
wa_fieldcat-outputlen    = &5.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
END-OF-DEFINITION.
DATA: wa_lfa1 TYPE ty_lfa1,
      wa_bkpf TYPE ty_bkpf,
      wa_bkpf1 type ty_bkpf,
      wa_bsegtemp type ty_bsegtemp,
      wa_bsegnew type ty_bsegnew,
      wa_bsegnew1 type ty_bsegnew,
      wa_J_1IMOVEND type ty_J_1IMOVEND,
      wa_t005u type ty_t005u,
      wa_bseg TYPE ty_bseg,
      wa_out    TYPE ty_out.
DATA: gt_out TYPE STANDARD TABLE OF ty_out,
      gt_out1 TYPE STANDARD TABLE OF ty_out,
      gt_lfa1 TYPE STANDARD TABLE OF ty_lfa1,
      gt_bsegtemp type standard table of ty_bsegtemp with header line,
      gt_bsegnew type standard table of ty_bsegnew with header line,
      gt_bsegnew1 type standard table of ty_bsegnew with header line,
      gt_J_1IMOVEND type standard table of ty_J_1IMOVEND,
      gt_bkpf1 TYPE STANDARD TABLE OF ty_bkpf WITH HEADER LINE,
      gt_t005u type standard table of ty_t005u,
      gt_bseg TYPE STANDARD TABLE OF ty_bseg WITH HEADER LINE,
      gt_bkpf TYPE STANDARD TABLE OF ty_bkpf WITH HEADER LINE.
selection-screen begin of block b1 with frame title text-001.
select-options: s_budat for bkpf-budat obligatory,
                s_ktokk for lfa1-ktokk obligatory.
               s_wrbtr for bseg-wrbtr.
parameters: p_bukrs type bkpf-bukrs obligatory default '1000'.
           p_gjahr type bkpf-gjahr obligatory.
           p_lifnr type bseg-lifnr obligatory default '300040',
           p_ktokk type lfa1-ktokk obligatory default 'Z200'.
selection-screen end   of block b1.
START-OF-SELECTION.
PERFORM sub_fetch_data.
PERFORM sub_process_data.
END-OF-SELECTION.
PERFORM sub_build_fieldcat.
PERFORM sub_build_layout.
PERFORM eventtab_build USING gt_events[].
PERFORM comment_build USING it_listheader[].
PERFORM sub_disp_data.
*&      Form SUB_BUILD_FIELDCAT
      text
--> p1        text
<-- p2        text
FORM sub_build_fieldcat .
sort gt_out by name1.
*DEFINE M_SORT.
   ADD 1 TO WA_SORT-SPOS.
   WA_SORT-FIELDNAME = &1.
   WA_SORT-UP        = 'X'.
   WA_SORT-SUBTOT    = &2.
   APPEND WA_SORT TO I_SORT.
END-OF-DEFINITION.
*m_sort 'NAME1' 'X'.
*M_SORT 'ADDR' 'X'.
m_fieldcat 1 'LIFNR' ' ' text-026 10.
m_fieldcat 2 'NAME1' ' ' text-006 35.
m_fieldcat 3 'ADDR' ' ' text-007 162.
m_fieldcat 4 'J_1IPANNO' '' text-008 40.
m_fieldcat 5 'J_1ICSTNO' '' text-009 40.
m_fieldcat 6 'J_1ISERN' '' text-010 40.
m_fieldcat 7 'OPBAL' '' text-011 18.
m_fieldcat 8 'PURCH'    '' text-012 18.
m_fieldcat 9 'PAYM' '' text-013 18.
m_fieldcat 10 'GRDEB' '' text-014 18.
m_fieldcat 11 'OTHDEB' '' text-020 18.
m_fieldcat 12 'OTHCRE' '' text-021 18.
m_fieldcat 13 'BAL' '' text-023 18.
m_fieldcat 14 'TDS' '' text-022 18.
ENDFORM.                    " SUB_BUILD_FIELDCAT
*&      Form SUB_BUILD_LAYOUT
      text
--> p1        text
<-- p2        text
FORM sub_build_layout .
g_layout-zebra             = 'X'.
g_layout-colwidth_optimize = 'X'.
ENDFORM.                    " SUB_BUILD_LAYOUT
*&      Form EVENTTAB_BUILD
      text
     -->P_GT_EVENTS[] text
FORM eventtab_build USING    gt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = gt_events.
READ TABLE gt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE 'TOP_OF_PAGE' TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
ENDFORM.                    " EVENTTAB_BUILD
*&      Form COMMENT_BUILD
      text
     -->P_IT_LISTHEADER[] text
FORM comment_build USING    p_it_listheader TYPE
                                        slis_t_listheader.
data: v_text(30) type c,
      v_datelow(10) type c,
      v_datehigh(10) type c,
      v_month(2) type c,
      v_day(2) type c,
      v_year(4) type c.
v_day = s_budat-low+6(2).
v_month = s_budat-low+4(2).
v_year = s_budat-low+0(4).
concatenate v_day '.' v_month '.' v_year into v_datelow.
clear: v_day,v_month,v_year.
v_day = s_budat-high+6(2).
v_month = s_budat-high+4(2).
v_year = s_budat-high+0(4).
concatenate v_day '.' v_month '.' v_year into v_datehigh.
clear: v_day,v_month,v_year.
concatenate 'From' v_datelow 'To' v_datehigh into v_text
                                    separated by space.
clear: v_datelow, v_datehigh.
ls_line-typ = 'H'.
ls_line-info = text-116.
APPEND ls_line TO p_it_listheader.
ls_line-typ = 'S'.
ls_line-key = text-090.
ls_line-info = v_text.
APPEND ls_line TO p_it_listheader.
ENDFORM.                    " COMMENT_BUILD
*&      Form TOP_OF_PAGE
      text
--> p1        text
<-- p2        text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_listheader.
ENDFORM.                    " TOP_OF_PAGE
*&      Form SUB_DISP_DATA
      text
--> p1        text
<-- p2        text
FORM sub_disp_data .
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = g_repid
      it_fieldcat        = it_fieldcat[]
      is_layout          = g_layout
      i_save             = 'U'
      it_events          = gt_events[]
    IT_SORT             = I_SORT[]
    TABLES
      t_outtab           = gt_out1[].
ENDFORM.                    " SUB_DISP_DATA
*&      Form sub_fetch_data
      text
--> p1        text
<-- p2        text
form sub_fetch_data .
select bukrs
       belnr
       gjahr
       blart
       budat
       from bkpf
       into table gt_bkpf
       where budat in s_budat
       and   bukrs = p_bukrs
      and   gjahr = p_gjahr
       and   blart in ('KR','KG','KZ','RE','DK','Z1','AB','SA','KA','DZ').
select belnr
       gjahr
       bschl
       umskz
       shkzg
       wrbtr
       hkont
       lifnr
       from bseg
       into table gt_bseg
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and   gjahr = gt_bkpf-gjahr
      and gjahr = p_gjahr
       and   bschl in (21,25,29,31,50,39,38,19,35).
      and kunnr in gt_
      and lifnr = '0000300019'.
select belnr
       gjahr
       bschl
       umskz
       shkzg
       wrbtr
       hkont
       kunnr
       from bseg
       appending table gt_bseg
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and   gjahr = gt_bkpf-gjahr
      and gjahr = p_gjahr
       and   bschl in (21,25,29,31,50,39,38,19).
break manukapur.
sort gt_bseg by lifnr bschl.
delete adjacent duplicates from gt_bseg comparing all fields.
loop at gt_bseg into wa_bseg.
if wa_bseg-lifnr is not initial.
move: wa_bseg-lifnr to wa_bsegtemp-lifnr.
      append wa_bsegtemp to gt_bsegtemp.
      endif.
endloop.
delete adjacent duplicates from gt_bsegtemp comparing lifnr.
select lifnr
        name1
        ort01
        ort02
        pfach
        pstlz
        regio
        stras
        ktokk
        telf1
        telf2
        from lfa1
        into table gt_lfa1
        for all entries in gt_bseg
        where lifnr = gt_bseg-lifnr
        and ktokk in s_ktokk.
       and lifnr = '0000300030'.
select bland
        bezei
        from t005u
        into table gt_t005u
        for all entries in gt_lfa1
        where bland = gt_lfa1-regio
        and land1 = 'IN'
        and spras = sy-langu.
select lifnr
       J_1IPANNO
       J_1ICSTNO
       J_1ISERN
       from J_1IMOVEND
       into table gt_J_1IMOVEND
       for all entries in gt_bseg
       where lifnr = gt_bseg-lifnr.
*select bukrs
      belnr
      blart
      budat
      from bkpf
      into table gt_bkpf1
      where budat < s_budat-low.
      and zfdbt < s_budat-low.
select
       wrbtr
       lifnr
       from bseg
       into table gt_bsegnew
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and xopvw = 'X' .
      and zfbdt < s_budat-low.
select bukrs
       lifnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsik
       into table it_bsik
       for all entries in gt_bseg
       where lifnr = gt_bseg-lifnr
      and   lifnr = '0000300000'
       and   bukrs = '1000'
       and   budat <= s_budat-low.
select bukrs
       lifnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsak
       appending table it_bsik
       for all entries in gt_bseg
       where bukrs = '1000'
       and   lifnr = gt_bseg-lifnr
      and   lifnr = '0000300000'
       and   budat <= s_budat-low
       and   augdt > s_budat-low.
select bukrs
       kunnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsid
       into table it_bsid
       for all entries in gt_bseg
       where bukrs = '1000'
       and   kunnr = gt_bseg-lifnr
      and   kunnr = '0000300000'
       and   budat <= s_budat-low.
select bukrs
       kunnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsad
       appending table it_bsid
       for all entries in gt_bseg
       where bukrs = '1000'
       and   kunnr = gt_bseg-lifnr
      and   kunnr = '0000300000'
       and   budat <= s_budat-low
       and   augdt > s_budat-low.
if it_bsid[] is not initial.
append lines of it_bsid to it_bsik.
endif.
*delete gt_bsegnew where lifnr <> '0000300000'.
*break manukapur.
*sort gt_bsegnew by lifnr.
*loop at gt_bsegnew into wa_bsegnew.
*collect wa_bsegnew into gt_bsegnew1.
*endloop.
loop at it_bsik .
it_out2-lifnr = it_bsik-lifnr.
*it_out1-budat = it_bsik-budat.
*it_out1-blart = it_bsik-blart.
if it_bsik-SHKZG = 'H'.
it_out2-wrbtr = it_bsik-wrbtr.
else .
it_out2-wrbtr = it_bsik-wrbtr * -1.
endif.
append it_out2.
clear: it_out2, it_bsik.
*endif.
*clear it1.
endloop.
sort it_out2 by lifnr.
loop at it_out2.
it_out3-lifnr = it_out2-lifnr.
it_out3-wrbtr = it_out2-wrbtr.
collect it_out3.
clear: it_out3, it_out2.
endloop.
endform.
*&      Form sub_process_data
      text
--> p1        text
<-- p2        text
form sub_process_data .
*sort gt_bsegtemp by lifnr .
sort gt_bseg by lifnr bschl.
sort gt_bsegnew by lifnr.
sort it_out3 by lifnr.
*loop at gt_bsegnew into wa_bsegnew.
*at end of lifnr.
*sum.
*endat.
*endloop.
sort gt_bkpf by blart.
loop at gt_bseg into wa_bseg.
if wa_bseg-lifnr is not initial.
read table gt_lfa1 into wa_lfa1 with key lifnr = wa_bseg-lifnr.
move: wa_lfa1-name1 to wa_out-name1,
     wa_lfa1-lifnr to wa_out-lifnr.
read table gt_t005u into wa_t005u with key bland = wa_lfa1-regio.
concatenate wa_lfa1-stras ',' wa_lfa1-ort01 ','
            wa_lfa1-ort02 ',' wa_t005u-bezei ','
            wa_lfa1-pfach ','
            wa_lfa1-pstlz ',' 'Ph:'
            wa_lfa1-telf1 ','
            wa_lfa1-telf2
            into wa_out-addr separated by space.
read table gt_J_1IMOVEND into wa_J_1IMOVEND with key lifnr = wa_bseg-lifnr.
move: wa_J_1IMOVEND-J_1IPANNO to wa_out-J_1IPANNO,
      wa_J_1IMOVEND-J_1ICSTNO to wa_out-J_1ICSTNO,
      wa_J_1IMOVEND-J_1ISERN to wa_out-J_1ISERN.
      read table gt_bkpf into wa_bkpf with key belnr = wa_bseg-belnr.
if wa_bkpf-blart = 'RE' and wa_bseg-bschl = 31 or
wa_bkpf-blart = 'KR' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-purch = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-purch = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KR' and wa_bseg-bschl = 50.
*wa_out-tds = wa_out-tds + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-tds = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-tds = wa_bseg-wrbtr * -1.
endif.
endif.
*wa_out-tds = wa_bseg-wrbtr.
endif.
if wa_bkpf-blart = 'KG' and wa_bseg-bschl = 21.
*wa_out-grdeb = wa_out-grdeb + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'RE' and wa_bseg-bschl = 21.
*wa_out-grdeb = wa_out-grdeb + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 25
*or wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 29
**and wa_bseg-umskz = 'A'
or wa_bkpf-blart = 'SA' and wa_bseg-bschl = 25.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-paym = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-paym = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'DK' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'SA' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 38.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'DZ' and wa_bseg-bschl = 19
and wa_bseg-umskz = 'A'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KA' and wa_bseg-bschl = 39
and wa_bseg-umskz = 'G' or
       wa_bseg-umskz = 'H' or
       wa_bseg-umskz = 'J' or
       wa_bseg-umskz = 'L' OR
       wa_bseg-umskz = 'A'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KA' and wa_bseg-bschl = 35.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if ( wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 29 )
   and wa_bseg-umskz = 'A' or
       wa_bseg-umskz = 'B' or
       wa_bseg-umskz = 'I' or
       wa_bseg-umskz = 'M' or
       wa_bseg-umskz = 'O' or
       wa_bseg-umskz = 'V'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 27.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'Z1' and wa_bseg-bschl = 21 .
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
**if wa_bseg-shkzg = 'H'.
***wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
**wa_out-othdeb = wa_bseg-wrbtr.
**else.
**if wa_bseg-shkzg = 'S'.
***wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
**wa_out-othdeb = wa_bseg-wrbtr * -1.
**endif.
**endif.
**endif.
***if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 27.
      wa_out-othdeb = wa_bseg-wrbtr.
***endif.
***if wa_bkpf-blart = 'Z1' and wa_bseg-bschl = 21.
      wa_out-othdeb = wa_bseg-wrbtr.
***endif.
read table it_out3 with key lifnr = wa_bseg-lifnr binary search.
on change of wa_bseg-lifnr.
*move: wa_lfa1-name1 to wa_out-name1,
    wa_lfa1-lifnr to wa_out-lifnr.
wa_out-opbal = it_out3-wrbtr.
endon.
*if wa_out-opbal is not initial.
*wa_out-bal = wa_out-opbal + wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
**else.
*wa_out-bal = wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
*endif.
wa_out-bal = wa_out-opbal + wa_out-purch + wa_out-paym + wa_out-grdeb + wa_out-othdeb + wa_out-othcre.
at end of lifnr.
*wa_out-bal = wa_out-opbal + wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
append wa_out to gt_out.
*collect wa_out into gt_out.
clear wa_out.
clear it_out3.
clear wa_bsegnew1.
endat.
endif.
clear: wa_bseg, wa_bkpf, wa_J_1IMOVEND.
endloop.
loop at gt_out into wa_out.
collect wa_out into gt_out1.
endloop.
endform.                    " sub_process_data
Regards,
Santosh Kumar M.

Report to find a material by a mfr part number and old material number

Hi,
Is there any standard report to find a material by a mfr part number and old material number ?
For the moment, we are using MM03 to search articles by these selection criterion.
Thanks,
Julien Girard

Hi
As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
Use Txn SQVI, enter the Quick view field say- ZMNFR and click the create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter MARA for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only. Click the tick mark , you will go to the next screen,
You will notice Quick viewer Intial screen
Open the node general material data
Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
Please ensure that you are maintaining both the details in material master basic data1 and purchasing view if you wish to get out output
Best regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:52 AM

Problem report for finder: finder quit unexpectedly

Last night I removed some viruses etc., from my computer that were making ads appear and also tabs opening when not wanted by random ads. I then installed virus protection, and also installed a software update. During those processes I restarted my computer a few times. The last time, finder wouldn't close down but in the end my macbook restarted and since then I have this message constantly popping up: problem report for finder - finder quit unexpectedly. I can't open up anything else and get a message saying when I try: check with developer to make sure safari (as an example) works with this version of OS X. You may need to reinstall the application.
In ten the details part it states crashed thread 0 but it also mention application specific information:
dyld: launch, loading dependant libraries, ignoring DYLD_*env vars
and then:
dyld error message:
library not loaded:/ system/library/frameworks/videotoolbox.framework/versions/a/videotoolbox
referenced from: /system/library/frameworks/qtkit.framework/versions/a/qtkit
reason: image not found.
Please please help. It's driving me nuts. I really need my computer. So much that Im even contemplating just buying a new one if nothing works :/

FIrst, get rid of your "virus protection," which is either useless or worse than useless. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Getting error in report 6i database 10g in thin client

Hi,
I have one report in which button, i am calling anothere report on that button in
6i report builder and 10g database.
this report is working fine in thick client getting error in thin client
rep-1418
Thanks
Reena

You post so few info
Have a look here, Maybe could be it helps
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.htmlhelp_rwbuild_hs%7Crwrefex%7Cplsql%7Cbuiltins%7Csrw%7Csrw_null_arguments~htm/

Is thr any std report to find vendor excise details

Guru's
is thr any std report to find vendor excise details like CST,LST,ECC no.
Plz guide
Thamks in advance

go to SE16
enter table name J_1IMOVEND enter
remove Maximum No. of Hits
press F8
Shift+ F8
click spreed sheet
give file name and select path
save
ur excle file is ready
reward if usefull

Report to find bad STO's

In STO, my ordered qtn is 4, 2 delivery created, 4 PGIu2019d. however, I have received only 2 stock. It created two article doc for good receipts. One article doc for one stock. Somehow, good receipt good duplicated. So, I backed out one of the article doc and re-received that HU again. Now my ordered qtn and received qtn are same. I am ok with it. My question is, I need to create a report to find all the POu2019s that have been affected by this issue.
Because of this issue, I am receiving the erroru201D PO qtn exceeded by XX EAu201D when I am doing ZB0A

Hi Bala,
The following link will help you.
PCR and SCHEMAS
Thanks & Regards,
Sandip Biswas

Report to find out SC awaiting Approver

Hi,
We have a requirement from our users to have a BI report to find the Approver for who Shopping carts
are waiting. Is there any standard reports in SRM to get the Awaiitng Approver of the SC's. I appreciate any
solution or any kind of ideas .
Thanks
Krish

Hi
Hope you knew the work item so you can use these function module to get the desired results.
BBP_PDH_WFL_APPROVER_DISPLAY
BBP_WFL_DIN_APPR_FINALLIST_GET
BBP_PDH_WFL_APPROVER_GET
BR
Muthu

Report to find Exit Interview List?

Dear Experts,
Is there any standard Report to find out total number of Exit Interviews done so far with Divisions wise Please advice
Thanks & Regards
Khaiser

Dear Experts...
Please advice Is there any standard Report to find out total number of Exit Interviews done so far with Divisions wise.
Thanks & Regards
Khaiser

Report to find out Manager change in given period of time.

Hi All,
There is a standard report to find out info type changes. But it is not capturing the HRP1001 info type.
Is there any report or function module which will Identify the manager change for a given period of time?
Regards,
Ravi

Here is what you need to do
The customizing for the change log you have to do following setting in SM30->T77CDOC_CUST.
T77CDOC_CUST:
PlanVersion: 01
ObjectType: S ( position )
Infotype: 1001
Subtype = 'A002' ( reports to)
Activate = 'X'
After that you can analyse the change log with sa38->RHCDOC_DISPLAY
This will work if you have a reporting structure. i.e. one position reports to another position via A 0002 relationship.
cheers
Ajay

Report to find Locked objects in sap system

Hi All,
does anyone know the report to find out the locked objects in an sap system?
or
name of the table that stores locked objects ?
or any other way through which we can find the number of locked objects ?
Thanks and regards
Abdul Hadi

Hi,
You can unlock locked objects in transaction SE03.
Click on Display Repaired objects.
You can see all the objects that are locked.
To unlock you can select the particular object and click on Unlock.
Do reward points if the answer to your question is met.
Regards
Suhas

Report to find the basic price

dear gurus,
is there any report to find the vendor , material , and the basic price excluding tax.

Hi,
Me2L will be a better report to view your desired data.
Hope this will work for you.
T & R,
Brijesh

Report to find the retainage amount per each supplier site

Hi All
Is there a report to find the retainage amount per each supplier site ?
Regards;

Hi.
The Withholding Tax by Supplier Report shows both supplier and site.
Octavio

WCS Report to find b vs g clients?

Similar Messages

Maybe you are looking for