WCS upgrade and HTTP port open

Hello All,
I am trying to upgrade my Wundows based WCS 4.2.97.0 to 5.2.130.0.
During the upgrade it tells me that port 8 (http)is needed by WCS and being used by another application. I have tried to find out which application is using that port so that I either stop the app or service and failed.
Would anyone kow a quick way to discover/disable the app on a Win 2003 server/
thanks a lot
Bo

Hi ericgarnel,
I am not running IIS on the server. I removed the WCS 4.2.97.0 and rebooted the server. I still get the same port hhtp (port 80) is being used by another application.
thanks
Bo

Similar Messages

IPad 16GB iOS 8.1.1 upgrade and now cannot open Music and Videos apps

My iPad 16GB installediOS 8.1.1 upgrade and now cannot open Music and Videos apps...HELP?

Since yesterday morning about 11:00 I have been having TERRIBLE email problems on this iPad 3G. Email comes in (I hear the sound) but nothing displays -- no folders, no content, no nothing in e-mail. The blank email screen shows up and then disappears after about 10 seconds, taking me back to the Home Screen.
Right now, the only way I can see email on this device is to log onto AOL via the AOL app.
I have been doing a lot of online reading about the problem. It has to do with iOS 8.1.3 and it affects older iPads and iPhones. I'm having no problems on my iPod touch, which -- fortunately -- is so old it cannot update its iOS 6.
I waited to update the iOS on this iPad until iOS 8 was "mature." That was about 2 weeks ago.
Anybody know know if Apple is aware? working on a solution?

OS 10.8.4 (recent upgrade) and can not open a .dmg file

I am using an iMac 2.8 GHz Intel Core i7 and have recently upgraded to 10.8.4 and can not open any .dng file. It indicats that it is not recognizeable. How can I intall my downloaded software?
Thanks

Something else is going on then. Set up a test/new account. If the problems appears there too, then it means it's a system wide problem.
Another thing to try if you have not already done so is to disconnect all devices from your computer, repair permissions and restart your computer. Or do the following:
Mountain Lion Recovery
Boot up from your computer by holding down the command+r keys. This will take you to the recovery drive.
Select Disk Utility & hit Return.
In Disk Utility select the HD on the left & click on Repair Disk (bottom right).

Iphoto requires upgrade and won't open

Hello - I have been having trouble with my iPhoto for a long time. For the longest time it would say I need to upgrade, and then it would open, but now, it still asks me for an upgrade, but says it's either "in use" or not readable.

Hello there - so I am going to try my best to give you an entire view of all of my issues with iPhoto.
My Operating System: OSX Version 10.9.3
iPhoto Version 9.5.1
When I click on iPhoto App - a dialogue box pops up, "Your Photo Library Needs to be Upgraded" with options to either "quit" or "upgrade". I always choose "upgrade" as this has been happening for a long long time, and when selecting "upgrade" - it was opening fine. Since about 1 month or so ago, it no longer opens up after selecting "upgrade".
our photo library is either in use by another application or has become unreadable
Now what is happening, is a 2nd dialogue box pop ups indicating, "Your photo library is either in use by another application or has become unreadable".
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
I have tried EVERY single option listed above at least 10 times, with no different outcome.
My iPhoto Library is on an external drive. What other information do you require, as I really concerned about losing all my pictures.
Thank you!!

BEFW11S4 UDP AND TCP PORT opening

How do i open UDP AND TCP ports specifically TCP ports: 80, 6667, 28910, 29900, 29920
UDP ports: 4321, 27900 Its for a networkable game i need to open these ports to play it.

Ok But when i try disabling the numbers in the forwarding field i run out of spaces in the field to be able to disable them Is there an advanced firewall settings that i dont know about? I put in all of the range forwarding and put the range forwarding start for example 80 originally (TCP ports: 80, 6667, 28910, 29900, 29920
UDP ports: 4321, 27900) The ones i try to disable i run out of fields to disable them in the forwarding for example there are 10 slots for disabling and Im trying to disable them on two numbers 192.168.1.101. and 192.168.1.100 So i need to disable them for both ip numbers I got 10 fields to enter it into them and 10 x 2 is more than the numbers..... You get me?? and on top of that i dont know if what i did was enough Linksys doesnt want to help me without paying 30 dollars so im just thinking i should buy a new router....... i mean they charge 39 dollars for a new router and they want me to pay 39 dollars for tech support it just doesnt make any sense........

Upgraded and now cannot open iPhotos

I just updated to Maverick, but now iPhotos 9.2.3 won't open. Did I just loose all my photos? If I upgrade my iPhotos, will I be able to get them back?

Hello K29292,
Thank you for the question, and I definitely understand your concern. The iPhoto application and your iPhoto Library are stored in two different locations, so even if you cannot open iPhoto, your photos are still in their original location.
The version of iPhoto you are currently running is not compatible with Mavericks, but you can upgrade iPhoto to the latest version to access your photos. Follow the steps in the article below to upgrade the iPhoto application:
iPhoto '11: Update your iPhoto software
http://support.apple.com/kb/PH2509
Once you update iPhoto, you should be able to access your iPhoto Library, but it is always a good idea to have a backup of your photos:
iPhoto '11: Back up your iPhoto library
http://support.apple.com/kb/PH2504
Thank you for using Apple Support Communities.
Best,
Sheila M.

SIP Inspection and dynamic port opening after re-invite

Platform: ASA 8.3(2)
Hello,
I have SIP devices along with SipTrunk and media endpoints. I am having issues with the ASA not dynamically opening (sip inspect enabled) UDP ports for RTP after a SIP re-invite causes the media endpoints to change within SDP.
The problem as below.
Initial SIP invite setups properly with ports dynamically opened between the media endpoints in the ASA
Re-inivite from the SIP device causes the media endpoints to change within the SDP
ASA blocks ports associated to the new media endpoints
I can resolve this by allowing the ports in the ACL, but suprised this is not working as re-invites to change media endpoints is to be expected in SIP conversation.
Regards,
AJ

Below is the script you can use to reproduce this. Points worth mentioning.
Initial invite sets up the media between SIP Trunk and a media device ( 10.1.2.150) in the inside network, SIP signalling will be with 10.1.2.100. At this poit RTP flows freely between the SIP Trunk and the media device.
If the call is fax, a re-invite will occur and this will cause the IP address to change in the SDP. The new media endpoint becomes 10.1.2.151 (This device is SIP and Media (T38) capable).
For every SIP call we establish 10.1.2.150 will be used for media, we do not want to change this behaviour.
ASA 8.3 (2)
conf t
interface Ethernet0/0
nameif Inside_Voice
security-level 100
ip address 10.1.2.11 255.255.255.0 standby 10.1.2.12
exit
interface Ethernet0/1
nameif Outside_SIP_Trunk
security-level 0
ip address 10.1.60.254 255.255.255.0 standby 10.1.60.253
exit
object-group network SIP_trunks
network-object 1.2.3.0 255.255.255.0
exit
object-group service SIP_service
service-object tcp destination eq sip
service-object udp destination eq sip
exit
object-group network SIP_inside_servers
network-object host 10.1.2.100
exit
access-list Outside_SIP_in extended permit object-group SIP_service object-group SIP_trunks object-group SIP_inside_servers
access-group Outside_SIP_in in interface Outside_SIP_Trunk
route Outside_SIP_Trunk 0.0.0.0 0.0.0.0 10.1.60.1
class-map inspection_default
match default-inspection-traffic
exit
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
inspect icmp error
lass class-default
set connection decrement-ttl
exit
service-policy global_policy global
end

Downloaded itunes 11.4 upgrade and won't open at all

Hi, I have OS 10.6.8 and just upgraded to itunes 11.4 and it will not open at all.
Any suggestions?
Thanks

Any solutions for this problem? Running 10.6.8 and downloaded the most recent ITunes update I had available but didn't try to run it after installing, went to run it today and now I receive the message 'You can't open the application ITunes because it is not supported on this type of Mac.' and the ITunes symbol is crossed out. Any help would be appreciated.
Also forgot to mention, the Itunes version is 11.4 and it's 10.6.8 on one of the 2008 black macbooks.

I have downloaded elements 13 upgrade and can't open the editor

I registered the new serial numbers and opened the organizer, but when I try to go to the editor, it asks me to log in and accept the license agreement which I have done multiple times. In a vicious circle.

I registered the new serial numbers and opened the organizer, but when I try to go to the editor, it asks me to log in and accept the license agreement which I have done multiple times. In a vicious circle.

Loaded upgrade and it wont open/You cannot open the application "Firefox" because it is not supported on this architecture.

downloaded your latest upgrade.
Running on mac os 10.5.8
Power PC G5 dual 2 GHz
8 GB DDR SDRAM

I suggest yo change you system requirements: This is what is advertised
Operating Systems
* Mac OS X 10.4 and later
Minimum Hardware
* Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor
* 128 MB RAM (Recommended: 256 MB RAM or greater)
* 200 MB hard drive space
Im running
Model Name: Power Mac G5
Model Identifier: PowerMac7,2
Processor Name: PowerPC 970 (2.2)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 8 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.0.7f0
Serial Number (system): CK347009QEB
Hardware UUID:
SystemVersion 10.5.7 (121)
This is way above your so called system requirements
This has not solved the problem, but now forces me to use Safari

Why is Firefox so slow following the last upgrade and doesn'y open some websites or display graphics in others?

Pre=update Firefox was a faster and more reliable browser than IE but since this recent upgrade there are pages I visit regularly that are not loading at all. To check if there is an issue with a site I switched to IE and the page loaded immediately. Many sites I try to access with the updated version will not display graphics and since these are often online stores it makes the christmas shopping impossible with Firefox. At the moment IE functions on all these sites, it may not be my preferred browser but at least it works!

Thanks to "itsme95" - I found the resolution to the problem was to completely uninstall Firefox, all add-ins and extensions, reboot and then re-install firefox from a download from the mozilla site. All the pages that would not load before now load quickly and correctly - so the issue was in the automated update. A lesson learned for me is to reject auto-updates and when ready download the files myself.

HTTPS Port..?

Hi Experts,
What is the impact of changing the HTTP port to HTTPS.
Now we have both HTTP and HTTPS port opened and it is planned to close the HTTP port and have the HTTPS port alone.
Will there be an impact on any existing scenarios bcz of this..?

Thanks for your reply.
To my understanding only the proxy uses the HTTP port to post the data to XI. Am i correct?
Once more query is that will this HTTP closing have any impact on the webservice scenario that is using SOAP adapter with transport protocol as HTTP.

PORTAL ACCESS THROUGH HTTP and HTTPS BOTH

Hi,
Is it possible to make the portal listen on both http and https ports at the same time? What is the required configuration for the same?
Please let me know for any other details.
Any input is highly appreciated.
regards,
Chandra

Hello Chandra,
you can activate SSL in the J2EE engine and then you have both Protocolls avaliable. The documentaiton can be found at <a href="http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm">Configuring the Use of SSL on the SAP J2EE Engine</a>.
Regards
Gregor

I can't use indesign since upgrade, it keeps asking me to upgrade java which I have done and still wont open please help me i have a deadline

i can't use indesign since upgrade, it keeps asking me to upgrade java which I have done and still wont open please help me i have a deadline

DL the SE 6 JRE from http://support.apple.com/kb/DL1572.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I upgraded itunes today and now some of my music from cd's is in grey and I cannot open it on. I changed sync to AAC and went in and selected genres, artists, albums that I wanted to download. I want to listen to my music. Can anyone help me?? Please! .

I downloaded latest version of iTunes to my computer today and now some of my music - a lot - is showing up in grey after syncing to my iPhone 5 and I cannot open it. All music is from cd's purchased and before download was accessible. I went to SYNC and changed to AAC and reselected genres, artists, albums and synced again without success. Can anyone help? Please. I am so frustrated and have wasted all day on this. I want my music back!!!

When you upgraded, itunes should have put a copy of the itunes library database in a folder named *Previous iTunes Libraries* . If you upgraded itunes today it will show as
iTunes Library 2010-02-28.itl
Use these directions to get it back
http://support.apple.com/kb/TS1967
Since I am not sure of your setup, look for the "Previous" folder on both your C: and F: drives.

WCS upgrade and HTTP port open

Similar Messages

Maybe you are looking for