WCS11G - Start Menu Items for Admin interface?

I'm looking into WCS 11G since I need to migrate a 7.5.5 site.
As it looks now, code or structure won't be modified to better support features such as supporting the contributor interface better so a lot of our users will expect to use the admin interface.
I am however having an issue enabling simple start menu items for content. I.e. a simple Start Menu Item for a Page, simply will not show up. It shows up just fine in the contributor interface however.
I've been going through all the documentation, but I cannot see any references to there being any limits on what kind of assets can be presented in the admin interface.
Is this a bug I'm experiencing? Or simply an approach taken to force users over to the contributor interface?
Thanks
/Lars

By default the Admin UI will not show certain asset types, this is intentional and controlled by the property advancedUI.enableAssetForms in futuretense_xcel.ini. If you set this to true and restart then the Page assets and others will show up. Here's an extract from the Property Files Reference Guide:
advancedUI.enableAssetForms
Used to enable and disable the WebCenter Sites
Admin interface for content contributors. Access
to the following assets is affected:
• All flex assets and their parent assets
• All basic assets
• Engage assets, such as recommendations,
segments and promotions
• Query, Collection, and Page assets
By default, this property is set to false, which
disables the WebCenter Sites Admin interface for
content contributors. The assets listed above
cannot be created, edited, searched for, or deleted,
except from the WebCenter Sites Contributor
interface, where they are supported by default.
Note: In the Contributor interface, asset types and
assets intended for developers are either available
only for inspection or they are inaccessible. They
must be accessed from the WebCenter Sites
Admin interface. For a comparison of features in
the Contributor and Admin interfaces, see the
WebCenter Sites User’s Guide.
Default value: false
Phil

Similar Messages

  • Error publishing Start Menu items -12044

    Hi,
    I am working with WebCenter Sites Jumpstart kit and i am facing error in Mirror site configuration for avisports_store Publish Destinations. The Error is given below. Any Idea how to resolve this problem
    Error publishing Start Menu items, -12044, [pagename=OpenMarket/Xcelerate/Admin/MirrorSitePost] Error: com.openmarket.xcelerate.commands.StartMenuDispatcher: Publish: com.openmarket.basic.interfaces.AssetException: Remote object save didn't fire [error was -611]
    Regards,
    Shaheer Badar
    www.infotechinspiration.blogspot.com

    The said issue is resolved by using another physical machine for publishing Start Menu items. The Other physical machine is the same replica of actual development machine and this machine is used for mirroring and publishing. Note the Other machine must be up and ping properly.
    Regards
    Shaheer Badar
    www.infotechinspiration.blogspot.com

  • Start Menu items/shotcuts and Start Menu search ability on multiple workstations

    2/13/2014 our IT department began to receive complaints of missing programs. After investigation of a few users we were able to determine that the programs existed but all shortcuts and items from the start menu had been completely removed. In addition the
    searching feature of the start menu was not functional. This happened to about 90% of our environment and the catalyst seemed to be Windows updates or at least occurred after the auto reboot initiated by Windows Updates.  The only items visible in start
    menu were items added after the fact, internet explorer, magnifier, command prompt, and notepad. All other items, folders, and the ability to search installed programs or folders were completely removed. However all programs are present in the program files
    folders. THe start menu folder in program data was empty except for the aforementioned items. Additionally properties of start menu had all necessary checks in boxes such as search program files and folders etc. Also show hidden items and folders is enabled
    for many users so the items were not hidden but gone. And the biggest kicker of all was after a full domain investigation into the issues we found that the majority of our windows server platforms, primarily 2008, were also affected and system restore is unavailable.
    This conflicts with our idea that Windows Updates caused this since our servers get their updates on a manual initiated basis by their admins which we have not performed as of yet for this month. This caused me to begin looking at SCCM SCEP as all systems
    have System Center Endpoint Protection and received definition updates. Also accessing different user profiles or even a new profile did not make a difference, issue still present.
    Due to the enormous inconvenience we sent out a company wide email asking users to perform system restores to get us in a stable state. A system restore to the day before Windows updates (second Wednesday of every month configured by SCCM SCUP) restored
    the start menu items.
    On a multitude of machines IT performed troubleshooting and system restores recording the changes removed and added. We then, on a healthy machine, started to apply the windows updates and SCEP (antivirus) definitions 1 by 1 with out success of replicating
    the issue. Next we performed a system wide antivirus full scan and did not find any viruses. This is obviously not a system criticle issue bringing us down but is a huge concern for us in IT as it happened company wide and caused a large flux of tickets and
    some down time for non-technical users. We most definitely want to know the cause and after several days of investigation and troubleshooting Im turning to the Microsoft community for help.
    I know I categorized this as a Windows 7 issue and its affecting windows server 2008, 2003, and 7, but I did not see a forum for all windows platforms. Since the majority of affected users are Windows 7 I opened it here.
    So to summarize in a bulleted format:
    Issue: Wide spread issue affecting around 60-70 users and servers, all profiles, were all start menu items save one or two system defaults were removed. Additionally the searching feature for the start menu looks to be broken as programs
    exist in program files and are unsearchable from start menu. IT was also affected and I remain affected until I find the cause.
    Investigation and Troubleshooting:
    Start menu properties: nothing has changed and search options are enabled.
    Missing items are not hidden, hiding and unhiding does nothing and folder options show hidden files is checked.
    Program data start menu location is indeed empty as well as user app data start menu location
    No group policy's are in place altering start menu items and no group policy changes were made as of recent
    No SCCM packages pushed company wide in last month or pushed individually
    Windows Updates occurred on windows 7 machines only before the issue occurred and computers restarted and the issue surfaced
    System Center Endpoint Protection Antivirus updates and definitions deployed just before the occurrence with windows updates. SCEP def updates happen on all windows boxes to include servers
    Paint.exe was completely missing from system32 folder for some users machines to include my own
    System restore to that morning before restarts or previous day fixes the issue for windows 7 users
    No windows updates were initiated on any servers
    Servers were also affected with windows 7 machines
    About half the users affected had corrupt Microsoft Office 2013 Pro Plus Click to Run installations and for some the system restore did not fix this and we had to re-install office for around 10 users
    SCEP antivirus did not catch any viruses that could cause this, I performed MBAM scans on a handful of machines and didn't find anything either.
    Re-creating start menu shortcuts works
    Happened to two of our companies locations NH and MA, all part of the same domain but different LANS of course. Companies are interconnected by MPLS connection.
    I combed through SCCM to see if anything deployed and found nothing. Currently I have SCUP updates and SCEP updates disabled. I will post a list of Windows Updates that occurred when the issue occurred as well as the SCEP updates. I have read all the threads
    about this types of issues and tried all steps without success. Googling the issue also did not rear results.
    MichaelSpaulding

    Hi,
    I would like to suggest you try these steps to figure out what could be causing this problem.
    1. Run Troubleshooter
    Open the Search and Indexing troubleshooter
    http://windows.microsoft.com/en-US/windows7/Open-the-Search-and-Indexing-troubleshooter
    2. Create a new library and include fewer folders for test purpose. Now search for a file from that folder. See if it works.
    Create a new library
    http://windows.microsoft.com/en-US/windows7/Create-a-new-library
    3. Try to rebuild search indexing. Refer the steps from the following article.
    http://windows.microsoft.com/en-US/windows7/Change-advanced-indexing-options
    Also you may use the System File Checker tool (SFC.exe) to check the issue. The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
    http://support.microsoft.com/kb/929833
    In addition, you may refer to the following Microsoft TechNet article for the Windows Search related Group Policies.
    Group Policy for Windows Search
    http://technet.microsoft.com/en-us/library/cc732491(WS.10).aspx
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Add menu item for Batch Sequence?

    Hello,
    I've created a folder level script that will execute when Acrobat starts. The script adds a menu item, that when clicked, will call another function.
    I'm wondering if I can create a batch sequence and add a menu item for that as well? I basically just want to avoid going through the whole Advanced -> Doucment Processing -> Batch processing... -> and then find the batch sequence and click Run.
    I've seen plenty of examples for adding menu items that call folder level scripts, but nothing on batch sequences. Has anyone ever done this?
    Many thanks in advance!

    You can't create a menu item to a specific batch sequence. The closest you
    can get is to open the batch sequences window, using the execMenuItem()
    method and "BatchEdit" as the name of the command (I'm not sure it's still
    the same in Acrobat X).

  • Unable to click any of the start menu items ?

    Brand new toshiba p55w laptop (win 8.1 fully patched, 8GB, etc.
    Start menu is accessible but all options selected result in a "blue /blank desktop" screen and explorer.exe crashes and takes you back to the original desktop.  I can work around file explorer not being readily available but having to search
    for all the start menu items is just a pain.
    I have read numerous references to autodesk causing this.. it is not installed on this system.
    I'll gather logs from whatever is needed to diagnose

    Hi,
    Could you please explain a bit for all the option here?  Are you saying the Start menu APPs?
    When start the APP, where would you be back on ? Desktop or the start menu?
    If you mean the start menu APPs, we may  go through C:\ProgramData\Microsoft\Windows\Start Menu\Programs and try to run the APPs from there to check if the same issue occurs.
    Besides, please refer to the following KB about your issue.
    Win8: App: Modern: Apps fail to start if default registry or file permissions modified
    http://support.microsoft.com/kb/2798317
    Best regards,

  • With 3.6.12, Help menu item "For Internet Explorer Users" results in a "Page Not Found" error. Is this a known bug? Is it being addressed?

    Clicking the 3.6.12 Help menu item "For Internet Explorers" item results in a "Page Not Found" error.
    The URL of the resultant page is https://support.mozilla.com/en-US/kb/Windows%20start%20page?as=u
    Is this a known bug, if so, is it being addressed? If so, someone needs to work faster.
    If it is not a known bug, someone needs to get right on it - you want people to switch to Firefox and then there is this bug -- not a good way to impress Internet Explorer users.

    Hi Claudio Roca,
    I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
    Regards,
    Hau Chee

  • How to use Start Task Group for Workflow Interface

    Hi all,
    anyone who can tell me how to use the Interface IFWFTSKGRP (Start Task Group for Workflow Interface)?
    As far as I understood the documentation it can be used to restrict the selection of workflows that can be started in the Generic Object Services. But the question is how to implement it.
    Best regards,
    Carsten
    Edited by: Carsten Drewes on Jun 10, 2009 10:30 AM

    Hi, Carsten,
    (probably it's a bit too late to post an answer after 3 years , but I'll post it in case someone else needs it)
    You should implement GetTaskGroup method.
    The code should return id of the task group (otype TG, mantained in PFTC) that holds the list of workflow definitions.
    Here is a sample implementation. It's taken from FORMABSENC business object. It belongs to SAP demo workflow "Notification of Absence". I suppose it should be present in most systems and you can see it in action.
    begin_method gettaskgroup changing container.
    DATA: taskgroup LIKE rhobjects-object.
    *- set task group
    taskgroup = 'TG70000023'.
      *- set result
    swc_set_element container result taskgroup.
    end_method.

  • ECB Menu item for all CTs (Content Types) except folders (Without hardcoding CT names)

    Hi there,
    How to have an ECB menu item for all items only (and not on Folders).
    I canNOT hardcode the names of Content Types.
    Thanks.

    Have you tried using base content type id?
    http://social.technet.microsoft.com/Forums/en-US/cd63795b-9659-4b35-a023-c007398252a1/hidedisable-ecb-menu-for-particular-selection-in-document-library
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

  • CS4 Design standard Silent Install:  Start Menu Items

    Greetings!
    I've got everything working for a silent install of CS4 (Design Standard).  However, there seems to be an issue with creating the Start Menu Folders.
    My first try, I asked for all the shortcuts to be placed in a folder called "AdobeCS4."  Short and sweet.  After running the install, it created THREE folders.  The first, just called "Adobe" had the Media Player shortcut in it.  The second was the one that I'd asked for, AdobeCS4, and had the rest of the items in it, except for three.  The Third folder was named "Adobe Design Standard CS4", and had "Adobe Acrobat 9 Pro", Acrobat Distiller 9, and Adobe LiveCycle Designer ES 8.2" in it.
    So, I re-set the install.xml file to NOT make my custom folder name, but just use the one called 'Adobe'.
    However, the acrobat side of things still won't play nice.  It looks like in the "suite.mst" in the Acrobat Payload folder specifically calls for the cumbersome "Adobe Design Standard CS4" folder.  I tried editing that file, and the install of Acrobat failed, so I assume that the files are checked before install to make sure they're not corrupted or something.
    Has anyone been able to make this (Acrobat Install) work properly, and have an install NOT bloat the start menu like crazy? How about the Adobe Media Player install?
    I've currently got the install working cleanly using a batch file to change some registry values (disable eula, adobe.com, etc), move the shortcuts, and delete the old folder, which works, but is really not how "software of this caliber" should work.
    Thanks for taking the time to read this, and hopefully answer!
    --IT Drone for Penetrode

    Hi there. I don't know the answer to your question, but maybe these docs can help:
    http://www.adobe.com/devnet/creativesuite/
    Kind regards,
    Lynn

  • IWeb will not start, menu items dim, cannot open files

    I designed a website using iWeb and need to make modifications to it. However, after I tried to open an html file with iWeb and get this message:
    "Can’t open file “~/Sites/qhuyn002/Howto.html”
    ...iWeb closes on me. While this message is up and before I click OK to make it go away, the menu items are dim, and I cannot access any websites I've designed and saved in my "SITES" folder on this Macbook.
    I've re-started the computer many times. Same issue keeps coming up. iWeb seems to think that every time I open it, I am trying to open this html file. I just need it to start as normal so that I can use it!
    HELP!

    Up until V 2.0.3, iWeb stored the domain file for the last site that was opened in iWeb in Home Folder/Library/Application Support/iWeb.
    After I updated to V 2.0.4, I discovered that there was no domain file there. I keep all my domain files in separate folders in an "iWeb" folder kept in a second dock using Dock-It so that I can launch any site with two mouse clicks.
    Just for fun, I launched iWeb from the application and a site that I had "lost" during the upgrade appeared. It is still there and doesn't change no matter what site I launch in iWeb!
    Some people "lost" their domain file after the upgrade and couldn't find it on their hard drive although it would still launch in iWeb. It wasn't in the default location.
    I didn't report this to the iWeb development team as it didn't cause me any problems. Has anybody done this?
    Most problems with upgrades to iLife and iWork applications occur because, if they are not instructed to do so, some people don't bother to do a restart after installing them.

  • Start Menu Items

    Facing problem -> the Media parent "search and new" are not shown in start menu even if we enable it.

    In Sites 11.1.1.6.0 and later, the Admin UI intentionally no longer lets you find or create content assets. This is because the preferred UI for working with content assets is the Contributor UI. However, you can enable find/create of content assets in the Admin UI by setting
    advancedUI.enableAssetForms=true
    in futuretense_xcel.ini. See the Property Files Reference Guide for a description of this property.
    Phil

  • Advanced Actions used for Menu - Takes 3 menu items for 1 to work? Advanced Actions Help

    Alright, here's my next struggle! I have a bit of a strange course I'm putting together that has required a unique approach (at least for me). Basically I'm having learners learn about 10 different reports they can run with a tool they have, and I have a menu (see below) on a slide to allow them to choose to view the reports they want to see. The course is required, but they can view what reports they want as long as they see three. So, what I've done is the following:
    Enabled Reporting with a score of 10 points for each Menu Item:
         When a user clicks on a Menu item, it automatically, without AA registers 10 points to the quizzing. The whole course requires a score of 30/80 to pass.
    Tried making a system of jumping to content and returning to Menu with a function to show an item has already been viewed:
         As seen below, there is a separate column on the right. Essentially each menu item has a standard action that first has a command to jump to the slide the particular menu item content is at, and then      two, a show function for the green box to cover the grey box indicating the content has been viewed already. The slides for which the user has jumped to has a jump-to-slide on the last slide of the      content to return to this menu.
    Checking for Three menu items viewed:
         I have a final slide that has an On-Enter Conditional action that says if the cpinfoQuizpointsscored is = 0 then show caption A, in a separate decision, a similar action but for score of 10, and again for 20,      just so I can send them to a slide that tells them how many reports they need to view before completing.
    So here's the problem: When I'm previewing this menu, clicking on a menu item the first time does nothing except bring in the green square. The second attempt on a different item does the same thing. Finally on the third Item I choose, it will jump to the slide as it should and I can return as I should be able to. So why is it taking two failed jumps to get to a jump that works? Order does not seem to play into it. And the only pause I have on the slide is at the end for the "next" button you see. Any thoughts?

    What would the pause do? I'm hoping they don't go just in order. And the menu items are indeed smart shapes set to be buttons.
    This is the timeline of that Menu Slide.
    This is the Advanced Action example for one of the menu items. Each menu item has a similar action.
    This is the conditional action that checks how many reports have been viewed.

  • Group Policy question about setting Start menu items using devices and not users

    I am using Windows Server 2003 and Windows Server 2008 R2 servers set up for use as Active Directory Servers.
    What I am trying to do is lock down thin clients start menu options and I have been able to get this to work down to the user level.  However, what I want to do is have it locked down on the machine level.
    We have multiple users that use both "Thin Clients" with Windows 7 Embedded and we also have them using other PC's with using the same log in.
    So, for example when you create an OU for "Thin Clients", I want thin client devices in there and when people log in to these thin clients then the start menu will be locked down.  I want this to be user independent and thus I don't want Users
    in the OU, but I want to lock down the start menu.
    How can I do this with Group Policy Objects on a domain level?

    Hi,
    you could achieve this using GPO loopback processing. It was designed for the purpose of applying settings from user GPO to a certain group of computers.
    http://technet.microsoft.com/en-us/library/cc978513.aspx
    MCP/MCSA/MCTS/MCITP

  • Changing menu items for a whole site [was: How Can I Do This?]

    I downloaded a html/css template and started using it for the first time. I choose "CSS" in the properties and write something different in one of the menus(I have 2 menus) but it doesn't affect my other html files. What should I do so that when I change the name of a link in the menus, it will affect the whole website? Thanks in advance.
    [Subject line amended by moderator for clarity]

    Hi,
    If you use Dreamweaver template or Library item then it is possible.
    Ex:- http://www.thesitewizard.com/gettingstarted/dreamweaver5.shtml.
    http://webdesign.about.com/od/dreamweaverhowtos/a/aa090406.htm
    Thanks
    Mohan Vasam

  • Unattended install that has no Start Menu install for firefox 2.0

    Hi, I need to edit or have the settings to not have Firefox 2.0 install in the Start Menu. As you can see, I already have some items below that I configured and would like to stay configured. I'd like to know where the setting is mainly to turn off the install onto START\ALL PROGRAMS on a Windows XP box. Thank you.
    ..\localized\browserconfig.properties
    browser.startup.homepage=http://www.uspto.gov/
    ..\nonlocalized\defaults\pref\firefox.js
    // enable search suggestions by default
    pref("browser.search.suggest.enabled", false);
    // Whether or not app updates are enabled
    pref("app.update.enabled", false
    // Whether or not the application should check at startup each time if it
    // is the default browser.
    pref("browser.shell.checkDefaultBrowser", false);

    Your user agent shows Firefox/2.0.0.13;MEGAUPLOAD 1.0
    You have or had an extension installed (MegaUpload toolbar) that has changed the user agent from Firefox/3.6.4 to Firefox/2.0.0.13
    You can see the Firefox version at the top and the user agent at bottom of the "Help > About" window (Mac: Firefox > About Mozilla Firefox).
    You check (compare) what websites see: http://whatsmyuseragent.com/ - Whats My User Agent?
    You can check the '''general.useragent''' prefs on the '''about:config''' page.
    You can open the ''about:config'' page via the location bar, just like you open a website.
    Filter: '''general.useragent'''
    If ''general.useragent'' prefs are bold (user set) then you can right-click that pref and choose ''Reset''.
    See [[Web sites or add-ons incorrectly report incompatible browser]] and [[Finding your Firefox version]]
    See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Maybe you are looking for