WD ABAP iview for Adobe Forms showing data of previous PERNR

Hi Experts,
We have developed adobe forms using HCM P&F functionality. We copied standard delivered WD ABAP Iview "Termination" multiple times for the use in developed forms. The Portal IDs are attached to the employee's IT 0105-Subtype 0001 Syname.
We added the parameters in iview:
Application Parameter: GET_PERNR=X&PERNR_MEM_ID=ESS01&Process=ZXXX_XXX_FORM
Problem:
The Portal id is assigned to PERNR in IT 0105 - Subtype 0001 correctly and when we execute the Form Service link is clicked on Portal it shows the correct default data in Adobe form.
But if we remove the Portal id from 1 PERNR and assigned to another PERNR then Adobe Form still shows the data from previous PERNR.
We are unable to figure out the problem as the new Portal id is attached correctly and other WD Java iviews are showing correct data for existing PERNR but only Adobe forms are showing data from old PERNR assignment.
Please advise.
Sunny

Hi Siddharth,
We have already done a number of action to clear the cache such as:
- Set the 2 properties of the iview
a. Cache Level ---> None
b. Cache Validity Period --->-1
- Cleared Portal Run Time Cache
- Clear DB cache
- UME cache (In case you are changing users frequently )- System Administration -> System Configuration -> UME Configuration -> Support -> Invalidate cluster wide cache
- Clear the browser cache --> Most imp - Browser settings -> tools -> Internet Optionsu2026 -> Temporary Internet Files -> Delete Files.
The actions are already done but the problem is still there.
I read some blog on SAP INDX tabel which records the Portal IDs when user logged in and Iview Properties "PERNR_MEM_ID=ESS01" reads this table . I am not sure that if this is the problem.
Please help.
thanks
Sunny

Similar Messages

Adobe form displaying data of previous selected records

Dear All,
I have created a wd component consisting of 2 views.
In the first view i am displaying an ALV. When i select a record and click on the alv button, the second view
gets called which contains an Adobe Form showing the data.
The problem i am facing is that the record which gets displayed in the adobe form is the one previous selected record and not the current record which i select.
Kindly give your valuable suggestions .
Regards,
Niti

Hi ,
Adobe form is just an external media in your case , it has nothing to do with your data.
Check what data is getting passed to adobe form via debuging .
check if your getting the selected element .
You can also post your code here if possible.
Regards
Kuldeep

Regarding WD ABAP Tutorial for Adobe forms

Hello,
I'm having difficulty finishing tutorial for WD ABAP interactive forms by Thomas Jung..Questions:
1) Do we have to create an WD application to run it or do we have to test it using the pdf file? in the SDN video its not clear what to do after completing the exercise with form editor?
2) In the Adobe form editor from SE80, my file menu is blank...i cant use 'import'pdf from menu since there is no menu although I can drag n drop the elements from libraries.
Please let me know if I'm missing any installation or support packs!
Regards,
Ahmad

If you aren't seeing anything at all then there may be a problem with your ACF (Active Control Framework). The ACF is only used when running the adobe form in web dynpro in interactive mode. The ACF is generally installed along with the SAPGui, but may not be updated properly when the SAPGui is updated. Also there are some dependencies in the ACF version and the backend ABAP system version.
I had problems on my laptop when I first tried to use interactive forms in Web Dynpro ABAP. My form displayed, but I couldn't trigger the Submit to SAP event. I found several OSS notes on the ACF topic. I had to uninstall my current ACF version and install the version specific to Netweaver04S SP7. Just installing the SP7 version of the ACF did NOT work. Once I got the ACF all cleaned up, everything worked fine. Incidently the problems I had before patching the ACF effected both Web Dynpro ABAP and Web Dynpro Java.

Transactional iview for Adobe form in ESS MSS

Hi,
I have a object of printing adobe form in R/3 and ESS both. I have created the object for R/3. But now i have to create this object for ESS also.
Kindly suggest technically which is the best way to print the adobe form on ESS.
I have tried one way which is transactional I-view which is displaying the adobe form. Kindly suggest this is technically ok.
Ankit

What version are you on? There are fairly simple ways to do this in BSP's or even now if your are on ECC6, using ABAP Webdynpros are very easy.

Docs needed for Adobe forms development in ABAP Workbench

Hello Friends,
I need documents on how to develop adobe forms using abap workbench in SAP R/3 system.
Please send the documents to [email protected]
Points will be rewarded.
Regards,
Bruce.

Hi Bruce,
I have emailed you some documents for Adobe forms development in the ABAP workbench.
In addition you can also check the following links.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm</a>
These are sample WebDynpro Examples you will find in se80
WDR_TEST_ADOBE
WDR_TEST_ADOBE_PDF_ONLY
Hope this helps.

Adobe Form showing previous records data

Dear All,
I have created a wd component consisting of 2 views.
In the first view i am displaying an ALV. When i select a record and click on the alv button, the second view
gets called which contains an Adobe Form showing the data.
The problem i am facing is that the record which gets displayed in the adobe form is the one previous selected record and not the current record which i select.
Kindly give your valuable suggestions .
Regards,
Niti

this doesn't sound like an adobe issue. you need to set a breakpoint and check which record you're really passing to your interface

Creating a iview for XML Form builder Edit Form

Dear Experts
I have created an XML Form builder application which has Edit from,Renderlist and Show form. I able to create a datafile in by going to content manager. My requirement is to create an iview for Edit form so that i can assignt he ivew to end user to fill this form. I dont want to give content admin to end user.
I need to create an ivew to XML Form builder Edit Form
Regards
Noel

Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael

Driver program for ADOBE FORM

Hi experts ,
         Can anyone guide me for writing a driver program for ADOBE forms ( created using SFP transaction) . I have created the form but dont know how to run it using a driver program since i m new to SFP.
       Plz help me.
Message was edited by:
        suchita phulkar

Suchita,
You can check this code.. This is purley to run the ADOBE form, above one is to run a smart form.
*&      Form print_form
*       Subroutine to print the form
FORM print_form .
DATA : l_fmname TYPE funcname,
         l_params TYPE sfpoutputparams,
         l_docparams TYPE sfpdocparams,
         l_formoutput TYPE fpformoutput.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name                    = 'Z_CERT_CONTINU_FORM'
   IMPORTING
     e_funcname                 = l_fmname
*   E_INTERFACE_TYPE           =
* l_params-getpdf = 'X'.
l_params-nodialog = ''.
l_params-preview = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = l_params
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
l_docparams-langu = 'E'.
CALL FUNCTION l_fmname
    EXPORTING
      /1bcdwb/docparams = l_docparams
      g_regis            = g_regis
      g_date             = g_date
      g_frmname          = g_frmname
      g_comp             = g_comp
    IMPORTING
      /1bcdwb/formoutput = l_formoutput
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
*   E_RESULT             =
   EXCEPTIONS
     usage_error          = 1
     system_error         = 2
     internal_error       = 3
     OTHERS               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " print_form
Thanks,
Sreekanth
<i>*-- Please close the post and do not forget to reward if it helps you</i>

Problem with Configuration of GP for Adobe Forms

Hi,
I following the guide 'Configuration of GP for Adobe Forms' (from Configuration of GP for Adobe Forms )
When i try to configure 'Web Service Clients' in the visual administrator:
Configure this parameters:
- Destination URL SLD
- Authentication BASIC
- User
- Password
but the frame with this parameters:
-- System Name
-- WS Name
-- WS Port
don´t show.
I think it is an error in swing because the title 'System Landscape Synchronization' show but the scrollbar stop there.
Features:
Netweaver 04s
Visual administrator 7 SP 9 java version 1.4.2_09
Thank you in advance
with Regards, Mariano

Hi,
please check out this link it might help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
**********please reward points if the information is helpful to you***************

How to create a Webservice for Adobe Form(I need Coding)?

Hi,
I need coding for Webservice inorder to define the context structure for Adobe Form.
In AdobeForm:
1) I create a dataconnection and while creating it i need to give WSDL Url.
2) I have created it.
3) But iam not getting the Context structure in the Dataview.
For this wht coding i need to write in WSDL File?
Any Help is Highly aprreciated with Points.
Very urgent requirement?

Hi,
I'm not exactly sure what your problem is.
A description on how to call web services can be found in my blog:
/people/juergen.hauser2/blog/2008/02/25/using-web-services-with-sap-interactive-forms-by-adobe-overview-tips
If you are facing an issue with what is displayed in the data view for the WSDL data connection (i.e you are missing nodes) you could try to use Designer 8.0 instead since it cotains bug fixes in that area.
Regards,
Juergen

Adobe form getting data from BADI?

Hi,
I have a webdynpro component which calls an Adobe form which gets data from BADI i.e. prepoulate the values after interacting with the BADI's.How to find the BADI's name ?how it triggers that particular BADI.where it is calling exit handler?
please reply me soon..
Regards,
Lakshmi.

>
Lakshmi Atukury wrote:
> Hi,
> adobe form getting data from BADI only,through the BADI interface method Initialize.
> but technically i would like to know from where it is calling BADI and how it interacts with Adobe form.How the process goes?
>
> Regards,
> Lakshmi.
That's why we have debuggers. I suggest that you start debugging through the application and see what it is going on. I would find it difficult to see how the Form itself calls a BADI (since a BADI is an exit in ABAP coding). I would think that the BADI would be called via a service class of the Web Dynpro or the Web Dynpro is calling a function module to process the form. I would start back with the Web Dynpro and see how it is even initializing the form itself.

Driver program for adobe form error no job started

Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help.

Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help.

Need to configure output type for adobe form

Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
Chandra

Hi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it.

Good morning everyone! I would like to ask how can i subscribe for adobe forms central 11.99$ per month. I am currently here in United Arab Emirates. I really need to use this application cause it will benefit me a lot in my work. Thanks!

Good morning everyone! I would like to ask how can i subscribe for adobe forms central 11.99$ per month. I am currently here in United Arab Emirates. I really need to use this application cause it will benefit me a lot in my work. Thanks!

Hi,
OK. Following instructions, I've uninstalled the old Flash Player and installed the right one, and videos are now playing. Thanks for pointing me to the other posts on this site. YouTube and other videos are now playing
Some of the videos still play jerkily (they don't stream evenly). A few stream evenly once they've been allowed to buffer fully. (I think I'm using these terrms correctly.) Is this solely caused by low bandwidth, or is there something—an adjustment of some kind—that I can do with Flash Player to have online videos stream evenly, even from the moment I start them?
As I mentioned, to bypass this uneven streaming while watching online, I download the videos and watch them usually using Quicktime Player 7.6.4. Still, they don't always play evenly, but for the most part do.
I've just tested bandwidth and I'm told:
5.63 Bbps Download speed
0.63 Mbps Upload speep
Rafael

Standard print program for Adobe Forms

Hi all -
Does anyone know if there was a standard print program delivered for the predelivered Adobe form F110_AVIS_INT? And if there is - what is it? Is there any document anywhere to determine predelivered print programs for Adobe forms?
Your help is much appreciated!
Thanks
Abby

Hi
In SAP you can check for the Print Programs in Tcode <b>OB96</b>
which gives assignment of programs to script layouts
see the links related to Adobe forms
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
Reward points for useful Answers
Regards
Anji

WD ABAP iview for Adobe Forms showing data of previous PERNR

Similar Messages

Maybe you are looking for