WD Drive Utility (on WD Thunderbolt Studio) doesn't work after OSX update (10.8.5 or itunes 11.1 - not sure), any help?

Hi There,
I have just purchased WD Studio Thunderbolt and installed it on my Mac. The WD DRive Utility software worked fine until I have updated MAC OSX system (consolidated updates of 10.8.5, iTunes 11,1,0 and RAW didigtal cameras 4,09). After this Mac still can see the drive but the WD software cannot. Do you have any idea how to: 1) remove that update OR 2) install RAID using Disk Utility (wil this still work when WD launch update to WD Drive Utility?).
Thanks in advance,
Artur

Hello,
I too am having this issue with my Thunderbolt WD Velociraptor since 10.8.5.
I have written to WD Support, I suggest you do the same my friend.
This is the response so far....
Thank you for contacting Western Digital Support. Your case is forwarded to our second level of support to check the issue in our laboratory. When I will receive respond form them I will contact you back as soon as possible.
It may be up to APPLE to fix. I dont really mind who sorts it out as long as it is asap!
Cheers,
M

Similar Messages

My SuperDrive doesn't work after Lion update

My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
Thanks

I too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Boot camp doesn't work after Yosemite update..

Hi Loner T,
Like many people with the yosemite update, my boot camp no longer works.
I cannot find the drive when I'm booting up.
Startup Disk under system preferences only shows the Mac system and does not show any other option.
I've been trying to go through what you've posted to help other people but I've never even worked with terminal application before and everything is very confusing.
First of all here are the
"diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo fdisk /dev/disk0"
commands:
Last login: Fri Nov 14 22:06:33 on ttys000
MacBookPros-MacBook-Pro:~ macbookpro$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *251.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            125.0 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                125.1 GB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *13.6 MB    disk1
   1:        Apple_partition_map                         32.3 KB    disk1s1
   2:                  Apple_HFS League of Legends NA    13.6 MB    disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *201.1 MB   disk2
   1:        Apple_partition_map                         30.7 KB    disk2s1
   2:         Apple_Driver_ATAPI                         2.0 KB     disk2s2
   3:                  Apple_HFS Java for OS X 2014-001 201.0 MB   disk2s3
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *16.0 MB    disk3
   1:        Apple_partition_map                         32.3 KB    disk3s1
   2:                  Apple_HFS Flash Player            16.0 MB    disk3s2
MacBookPros-MacBook-Pro:~ macbookpro$ diskutil cs list
No CoreStorage logical volume groups found
MacBookPros-MacBook-Pro:~ macbookpro$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 490234751
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 244140624      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
244550264    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
245819800       1640
245821440 244412416      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
490233856        863
490234719         32         Sec GPT table
490234751          1         Sec GPT header
MacBookPros-MacBook-Pro:~ macbookpro$ sudo fdisk /dev/disk0
Disk: /dev/disk0    geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 244140624] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 244550264 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 245821440 - 244412416] HPFS/QNX/AUX
Thanks for your help!

Let us try this again. I omitted the count so you are dumping the entire disk. .Use Control+C to stop it.
This is what it should look like.
sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS    .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 e8 71 56 |........?.....qV|
00000020 00 00 00 00 80 00 80 00 f8 f7 08 1e 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 13 32 6d 13 b7 bb b5 32 |.........2m....2|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200

Western Digital MyBook Studio no longer works after Yosemite update

A little while ago (Jan 30) I updated Yosemite, and now my Western Digital My Book Studio (using firewire) shows up but no longer works - no Time Machine, or Super Duper back-ups. Does anyone know why this has happened, and what can be done to fix it?

I should add that the drive works fine with another MBP running OSX 10.6.8. Again, with 10.10.2 it either doesn't work or is incredibly slow.

Win 7 Brightness doesn't work after graphics update

Hey,
I have a late-2010 MacBook Pro running Bootcamp 4.0 with Windows 7 64-bit. My graphics card is the nVidia GeForce 320m. I looked online recently and found that there was an update available for my graphics card (previously I had the one that comes with bootcamp, which is from 2009 I believe--quite outdated you see). So I installed it, hoping for better DX11 support, etc... It installed fine, but now my display is stuck on 100% brightness, when before I could adjust it with the F1 and F2 keys. When I try using the keys it shows the Apple popup with the slider moving, but the brightness doesn't change. I went into Control Panel > Power Settings and tried adjusting it from there, with no luck. The nVidia Control Panel doesn't have any satisfactory controls to do this either. It must be, of course, that the driver update changed things, but I'm not sure how to rectify the situation. I uninstalled the Apple Driver-Display from Control Panel and then re-installed from the Bootcamp files, but it didn't help. I've heard some talk about Apple Cinema Display, but I'm not sure if that's the same thing as the Display and whether I should be looking for a driver for it.
Any help would be greatly appreciated!

I've come to the same conclusion. I tried installing different versions of the driver, but they all introduced some problem or other. It seems the only way to have everything work correctly is to use the old driver they provided. Too bad, really. Especially because I tried installing the Windows 8 preview, and unless the release version has more compatibility (unlikely), it won't work on my MacBook Pro.
For my next computer I'll follow Shootist007's advice and just buy a PC. I haven't been impressed by my mac, and OS X needs a little more work IMO.
Sorry I couldn't provide more help to anyone with the same issue! It seems Apple released this computer with an outdated driver and then abandoned support for it.

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

Airport doesn't work after firmware update

Hi.
I was using my home wireless network when the Software Update suggested a firmware update to my Airport. I did it, but since then it doesn't work any more. I mean, the Mac can't find it and it keep flashing the yellow light.
Have this happened to anyone else?
Thanks.
Best regards,
T

Try shutting down the DSL modem and your AirPort base station. Leave them S/D for about 5 minutes, then start the DSL modem, allow it to complete its test cycle, then start the AirPort base station.
Repair Permissions - /Applications/Utilities/Disk Utility.app. Start Disk Utility, select your HD and click on Repair Permissions. When finished, quit Disk Utility and then restart your computer.
Go to System Preferences/Network/AirPort
- click on the 'Network Name:' roll-button, select 'Join Other Network...', enter 'Network Name and select the security type you are using, and finally, enter your Password and click 'Join'.
- click on 'Advanced', TCP/IP and confirm that 'Configure IPv4:' is set to 'Using DHCP', click 'OK'.
- click the 'Apply' button and exit System Preferences.
If the above does not work then a factory reset of your AEB might be in order. The setup manuals for all AEBs are here: http://support.apple.com/manuals/#airport

HT204291 AirPlay Mirroring doesn't work after last update

I have a late 2011 Macbook Pro (running mountain lion), an iPhone 4s, and an Apple TV (3d gen). My iPhone and Apple TV work fine together. I can stream video and music without difficulty. My Macbook can stream audio, but since the last update to 5.1.1 I can't mirror my desktop or run video from my Macbook to the Apple TV. The option is there, but the TV screen only changes colors and garbles some text. It mostly looks like a pink and green abstract painting.
Short of restoring the Apple TV, is there anything else I can do?

Thanks Brian. I tried using the ethernet cord and it still only works for one account on my macbook - the account that's not signed into the Apple TV.
Wifi versus ethernet doesn't explain why it worked well before the update, but not afterward. Or why it works when I turn off photostream.

HTML animation effects doesn't work after last update

After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
Various animated png in html project appears immediatly without shows transitions or deformations.
I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
The same animation made with Hedge produce more the 100MB folio.
why new version of dps don't show my html anim correctly ? I hope adobe correct this proble.

We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil

N73: restore doesn't work after firmware update

Hello!
I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
After the update I tried to restore the backup via the same app.
Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
Is there another solution that doesn't involve buying this 3rd party software?
TIA

The phone is working well...
I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

Internal camera doesn't work after Firmware Update

Hi everybody,
I had some troubles after updating the Firmware to version 1.1 on my MacBook (the black model). Since the update my camera (the one mounted on top of the screen) doesn't work any longer (it keeps capturing a plain green picture) and the led near the camera is always lighted. Is there anyone who had the same problem? Any idea to solve it?
thanks
MacBook Mac OS X (10.4.8)

Hi,
problem solved restarting with OptAlt+PR

Ipod doesn't work after firmware update

I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
Now i'm trying to recover it again but my computer doesn't recognize it.
¿Is there anything I can do?
Thanks in advance.
Jse

The best place to look for help first is Genuine Apple help directly from Apple.
Read the iPod Touch Users Guide.
http://support.apple.com/manuals/#ipodtouch
Also start with the basics from Apple.
1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
And More..........

HP Laserjet m1214nfh MFP Doesn't work after firmware updating

Hello
HP Laserjet m1214nfh MFP (USB Connetcion).
I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing" and after some seconds LCD turns off and again prompts "Initializing".
Please guide me.
thank you

Hi,
Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
If the same persists please contact HP support by following Technical support after you buy for your region below:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Flash doesn't work after I updated it

I am using Firefox 34.0.5 and updated my flash player but after the update it stopped working. The videos doesn't show up. I tried disabling all add-ons and found out that Shockwave Flash 16.0 is causing the problem. What should I do to make it work again?
I don't know why but some videos work just fine and other videos doesn't show anything even a white or black screen, even though they're from the same site. When a video doesn't show up, the cursor changes from the normal cursor to "working in background" cursor rapidly.

''Talha [[#answer-672921|said]]''
<blockquote>
Hey,
Did you try these typical Flash fixes?
(1) Disable hardware graphics acceleration in Firefox and in Flash
(A) In Firefox, un-check the box here and restart:
orange Firefox button or classic Tools menu > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(2) Disable protected mode (Win Vista & Win 7 & maybe Win 8)
See this support article from Adobe under the heading "Last Resort": Adobe Forums: https://forums.adobe.com/message/4468493#TemporaryWorkaround
Hope it helps.
</blockquote>
I did both of these but it still didn't work. I tried using another browser and found out that the problem only occurs in firefox.

WD Drive Utility (on WD Thunderbolt Studio) doesn't work after OSX update (10.8.5 or itunes 11.1 - not sure), any help?

Similar Messages

Maybe you are looking for