Wd: failed to find the client

Hello!
I'm using linux-ck-corex kernel and systemd. I'm having problems with watchdog (I guess so).
I can't figure how to fix that error… that error is showing up in journal.
Maybe someone has an idea how to fix this error?
Cheers

jasonwryan wrote:And, if you have read this far, you might want to read this:
How To Ask Questions The Smart Way
*sigh*
Perhaps a different approach is needed.
If read this far
read: How To Ask Questions The Smart Way
else
read anyway: How To Ask Questions The Smart Way
fi
EDIT: This link is not to give you the runaround or to ignore your issues. It is a genuine attempt to help you learn to present the problems you are facing in a way that will be most conducive to finding solutions. Your present style of posting is not likely to lead to solutions. If you are offended by my lighthearted pokes, know that offense was not the goal ... but poking was. It would be easy to ignore posts that were not productive - but ignoring them would be equally unproductive (for everyone).
Last edited by Trilby (2013-02-13 13:16:27)

Similar Messages

Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,

Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj

RAID Fails to find the first device

Hello all.
This is my first post to the forum. I did a brief search but i couldn't find any good results, so i tought i'd post my prob here.
I have an MSI K7N2 Delta2-LSR motherboard, with a 450W PSU (i don't have any more info on that yet), 2x512MB RAM DDR 400 (no more info on that one yet either), 2x120GB SATA WD HD, 1xDVD TEAC, 1xDVD+-RW SONY DL, 1x1.44MB FDD, an ATI RADEON 9600 PRO ALL-IN-WONDER VGA card on an nForce chipset.
The first HD has WinXP installed on it with the raid drivers installed properly. The second HD has Mandrake 10.1 Linux installed on it. They are installed as separate arrays.
The problem I'm having is that while I'm working in Windows, after a while the computer completely freezes. The only possible way out of it is to reset the machine. After I do that, at the boot screen, it fails to find the first HD (the one with WinXP on it). If i turn it off for let's say 5 minutes, and boot up, it detects the HD again and goes on loading windows. After I log in i have at maximum 5 minutes before it freezes again.
It does this every time. The more time I leave my PC turned off, the longer time it will take to freeze again when I'm logged in WinXP. I formatted the HD many times, installing every possible combination of my drivers but the problerm persists. Although it has never happened anything like that in Linux.
Could it be the RAID Controller (onboard), the WD HDD, or the Motherboard in general?
What can I do to find out what the problem is? And if possible, how to solve it?
If more info is needed, I will update the info of my pc as soon as I get back home.
P.S. I cheched the WD HDD, using WD tools like Disk Diag, etc. It never gave me any problems. I also used UBCD for win, and cheked the disk, to dicover once again, that the disk supposingly has no problems.
Any help would be appreciated.
Thanks in advance.

of its label Power Supply Guide
i suspect the drives bad
go to wd site and look for their drive tester

Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent

Multicast fails: Cannot find the file specified

I have a deployment share that works great for unicasting, and I've now tried enabling multicast in preparation for a big rollout. The namespace was created successfully in WDS, and I've made sure my switches have IGMP snooping enabled, (multicast
with Ghost works), however the process always falls back to unicast.
LTIApply.log has this to say
<![LOG[------ Applying Windows image using ImageX.exe ------]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI applying image \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim using ImageX]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41023 sent: LTI applying image \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim using ImageX]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property SourcePath is now = \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\ReferenceImage]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 1672)]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1672)]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1672)]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Windows Deployment Services Multicast Client [Version 6.3.9600.16411]
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Copyright (c) Microsoft Corporation. All rights reserved.
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Started.
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Complete [0x80070002].
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Operation Failed. [0x80070002].
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > The system cannot find the file specified.
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = -2147024894]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer could not be completed, rc = -2147024894, falling back to using \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
During the deployment, I checked C:\MININT\Operating Systems\ReferenceImage, and sure enough the folder was empty. Any thoughts on why this process would be failing, or why it needs to even transfer the image file locally in the first place?
Gracias

Not sure what is going on here, not enough logging. Have you tried enabling WDS logging on the server side?
The WDSMCast.exe tool can't find the file on the server side, you might want to verify that the namespace was created correctly. The "DeploymentShare$" namespace should point to whatever local directory is on your machine.
wdsutil /get-allnamespaces
http://technet.microsoft.com/en-us/library/cc742155.aspx
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

How to find the client size?

i want to know how to find the size of the client?

Hi Gadangi,
Check OSS note# "118823 - CC-ADMIN: Size of a client".
Best regards,
Orkun Gedik

Is it possible to find the client OS by using Request Object?

how to know the Client OS(Operating System)by using HttpServletRequest object can anybody help me on this?

Get the headers and look for the user-agent. Usually you can find out the browers and os using this header value.

How to find the client number of xMII server i m running

Hi experts,
Here i am simply providing the URL in my browser and it shows the login page of xMII server.But i want to find under which client i am currently running this xMII ,how can i find that client number?
Thanks ,
S.Ramesh Kumar.

The term "client" does not neccessary apply with xMII. A "client" is an organization level in ECC. If you are looking for the system information open the url
http://server:port
and select system information.
Jamie

DeskI schedule often fail Cannot find the 'Universe' universe. (DA0011)

Hello,
I have a user with 25 reoccurring daily schedules. Out of these one or two will fail daily with the error "Cannot fine the 'Universe Name' universe. (DA0011). It is not always the same reoccurring schedule that fails. It fails on any of our four DeskI nodes, and the times it fails are not consistent.
It is only happening for instances against one universe. When I setup a schedule for myself with the same parameters, it completes successfully.
Business Objects Enterprise XI 3.1 SP3 FP5
AIX 5.3
Excel format to email.
This appears to have started happening in October, but I have not been able to find a reason why it is happening.
Thanks!

Ryan:
Were you ever able to resolve this issue? We are having the same issue where random schedules will fail with the message cannot find the 'Universe' universe. (DA0011). We know it is not a rights issue as we 3,000 + schedules going against the universes and only a handful will fail each day with this error.
We are on XI 3.1 SP4, it does not make a difference if the output is excel, text or PDF it happens
Brad

[Dropped] vdautomount fails to find the machine

Hello,
I'm using virtualbox-bin 4.3.20r96996, so I'd like some time to inspect some file into the VDI. Then I installed vdfuse but, the mounting still awful.
The python2 script vdautomount is not able to find the machine name nor the UUID.
All of these functions are based on the VboxAPI, found in the python2 libraries, but while VBoxManage gets the info, the script is some kind of trouble and even I tried to use some of the classes, then they fail.
Anyways, vdfuse mounts my VDI, but still some missing step to have the access to the file system. I hope that vdautomount will do it for me. Unfortunately I'm scarcely able to get vdautomount work.
Here's the report.
Any point ?
Last edited by TheSaint (2015-01-19 04:52:11)

I did:
$ mkdir /tmp/XPvdi
$ sudo vdautomount "xp" /tmp/XPvdi/
Usage: vdautomount [options] machine-name-or-uuid mountpoint
vdautomount: error: couldn't find machine "xp"
$ VBoxManage showvminfo xp |grep -i uuid
UUID: 67ed29f5-7d85-4322-aa6c-2a49110884d4
Hardware UUID: 67ed29f5-7d85-4322-aa6c-2a49110884d4
SATA (0, 0): /mnt/Store/Vboximg/Electron-14-08-11.vdi (UUID: 1f996f93-9f59-4c3c-a9f9-dab62b9c3df0)
$ sudo vdautomount "1f996f93-9f59-4c3c-a9f9-dab62b9c3df0" /tmp/XPvdi/
Usage: vdautomount [options] machine-name-or-uuid mountpoint
vdautomount: error: couldn't find machine "1f996f93-9f59-4c3c-a9f9-dab62b9c3df0"
$ vdfuse -f /mnt/Store/Vboximg/Electron-14-08-11.vdi /tmp/XPvdi/
$ ls -l /tmp/XPvdi/
total 20968141
-rw------- 1 user users 10737418240 17 gen 15.46 EntireDisk
-rw------- 1 user users 10733958144 17 gen 15.46 Partition1
Even I switched to community/virtualbox, deleted all /home related files and reinstall vdfuse, the problem hasn't change anything. The problem isn't the vdautomount script, but is rather the python2 vboxapi toolkit.
Can you show me
VBoxManage showvminfo "My VM Name" |grep -i '(uuid'
I don't think is a issue related to the path, the VBoxManage hasn't it.
EDIT
I inspected vdautomount and I found that is just a mere helper to find a named VM and pass the path to vdfuse execution.
My mistake was to expect that the script could find the name VM and mount it in loop, so it is possible to access the files in the partitions.
Beside that, vdautomount doesn't work, I'm giving it up, it fill not my expectations.
Last edited by TheSaint (2015-01-18 06:42:18)

Find the Client size

Hi,
In our environment, we have 4 Clients. How will I find the size of each Client?
Thanks in advance!

Hello,
RSSPACECHECK and RSTABLESIZE gives you the size according to the Tables selected.
Delivery class L,A,W are generally ignored during client copy.
Its best to run local client copy by checking the test run.
Regards
A pandit

CRS oui failed to find the node

Hi every friend,
I am trying to install the CRS on 2 solaris 9 (VERITAS CFS). But when the oui came to the page "Specify Cluster Configuration" page, The OUI can not find any node and also the ADD, EDIT , REMOVE three buttons unpressable with grey color. From the help I know that when OUI detect the third-party vendor clusterware, It will use the node infomation obtained from third-party vendor clusterware and these infomation is not able to be edited by OUI. But it seems that it can not obtain anynode infomation. I had ping the PUB/PRIV IP of both node and they are accessible. How can I make the OUI to find the node infomation?
Thank you very much!

Hi,

Yes, it is. 
Environment >> Servers >> jmsserver2 >> Configuration >> General > Machine : sv-jms2

regards
 Lukas 
 WLS 9.2

Finding the clients connected to a server

Hai Friends,
I am doing a project in grid computing. I have developed a socket program for the client and server side using java and multithreading.
I want to know the number of clirnts connected at a particular period of time and also the IP addresses of the client.
Can anyone please suggest us the code for doing that.

Create an object that describes each client. Something like:
public class Client
    private Socket socket;
    private WhatEver whatEverDataYouNeed;
    ...whatever methods you need...
}When a client connects create one of those objects and store it in a suitable data structure, e.g. LinkedList. When a client disconnects remove from list.
There should be a method in Socket that gives you the IP address, see the javadoc for Socket.

How do I find the Client ID with Airport Extreme?

Cant find the Manual Setup feature in the airport utility.

The Manual Setup feature....and a lot of other features..... were dropped when Apple went to Lion 10.7.4.
The best that you can do is open AirPort Utility and click on the AirPort Extrme icon to get some basic info. Click Edit in the box to go deeper into the application.
If you are still using Lion 10.7.4, you can install AirPort Utility 5.6 for Mac OS X Lion and keep it along with AirPort Utility 6.x on your Mac. Use the one that you want.
AirPort Utility 5.6 will not install on Mountain Lion unless you employ some unofficial workarounds.

Fail to find the file include

I am building a game and I just simply use a txt file to store the level reached.
Everything goes smooth but today I find something wrong.
I have included a levelrecord.txt in the included files section in iphone iOS setting.
But I find that after the app was installed, the apps can't read the number inside the text file, so I write the following codes to test in my iphone.
var testfile:File = File.applicationStorageDirectory.resolvePath("levelrecord.txt");
showtesttext.text=String(testfile.exists);
It returns False.
But after I play the first level, the text file is updated and then the above codes return True. And the apps can successfully update the level.
However, if I uninstall the app and reinstall it, the problem comes again and the number had to be read after I play the first level.
Did I accidentally change any settings therefore my text file is not included in installation? Because it works before, but I don't know when it started to have problem...
Thank you very much!

Maybe the last message in this page might help?:
http://forums.adobe.com/thread/728997?decorator=print&displayFullThread=true

Wd: failed to find the client

Similar Messages

Maybe you are looking for