Wd my book shows in disk utility but not in finder

can open the drive from within disk utility and a regular finder window will pop up. all data is intact. verify and repair show no issues. have checked finder preferences for showing external drives.

Do know the name of any file that is on the iso image? If so, do a Spotlight search on the file name and see if it show up. If it does, Command click on the result in the Spotlight list and see if the enclosing folder opens in Finder.
Francine
Francine
Schwieder
PS--Forgot to aske: when you said "shows in Disk Utility" I'm assuming it is shown not just as existing, but as being mounted.
Message was edited by: Francine Schwieder

Similar Messages

My external HD will show in Disk Utility but not in Finder

Here is the External hard drive info.
Type :           Partition
          Disk Identifier :           disk1s2
          Mount Point :           Not mounted
          File System :           Mac OS Extended (Journaled)
          Connection Bus :           USB
          Device Tree :           IODeviceTree:/PCI0/EHC2@1A,7
          Writable :           Yes
          Universal Unique Identifier :           A15B5F63-3A83-30E2-B2D2-7EF07CF136BE
          Capacity :           999.86 GB (999,860,912,128 Bytes)
          Owners Enabled :           No
          Can Turn Owners Off :           Yes
          Can Be Formatted :           Yes
          Bootable :           Yes
          Supports Journaling :           Yes
          Journaled :           No
          Disk Number :           1
          Partition Number :           2
It will show up in Disk Utility but not show up in finder. Ive tried mounting it, verifing it, repairing it. Nothing is working. I dont know what else to do! Please somebody help! I was in the process of backing this up when this happend

Also, here is the log of my disk utility with my external. Im not sure if that will help at all
===== Tuesday, September 3, 2013 11:18:20 AM Pacific Daylight Time =====
2013-09-03 11:18:24 -0700: Verifying partition map for “Seagate Backup+ RD Media”
2013-09-03 11:18:24 -0700: Starting verification tool:
2013-09-03 11:18:24 -0700: Checking prerequisites
2013-09-03 11:18:27 -0700: Checking the partition list
2013-09-03 11:18:27 -0700: Checking for an EFI system partition
2013-09-03 11:18:27 -0700: Checking the EFI system partition’s size
2013-09-03 11:18:27 -0700: Checking the EFI system partition’s file system
2013-09-03 11:18:27 -0700: Checking all HFS data partition loader spaces
2013-09-03 11:18:27 -0700: Checking Core Storage Physical Volume partitions
2013-09-03 11:18:27 -0700: The partition map appears to be OK
2013-09-03 11:18:27 -0700:
2013-09-03 11:18:27 -0700:
2013-09-03 11:18:43 -0700: Verifying and repairing partition map for “Seagate Backup+ RD Media”
2013-09-03 11:18:43 -0700: Starting repair tool:
2013-09-03 11:18:43 -0700: Checking prerequisites
2013-09-03 11:18:43 -0700: Checking the partition list
2013-09-03 11:18:43 -0700: Adjusting partition map to fit whole disk as required
2013-09-03 11:18:43 -0700: Checking for an EFI system partition
2013-09-03 11:18:43 -0700: Checking the EFI system partition’s size
2013-09-03 11:18:43 -0700: Checking the EFI system partition’s file system
2013-09-03 11:18:44 -0700: Checking all HFS data partition loader spaces
2013-09-03 11:18:44 -0700: Reviewing boot support loaders
2013-09-03 11:18:44 -0700: Checking Core Storage Physical Volume partitions
2013-09-03 11:18:44 -0700: Updating Windows boot.ini files as required
2013-09-03 11:18:44 -0700: The partition map appears to be OK
2013-09-03 11:18:44 -0700:
2013-09-03 11:18:44 -0700:
2013-09-03 11:18:46 -0700: Verifying volume “Steven Polanco Mac”
2013-09-03 11:18:46 -0700: Starting verification tool:
2013-09-03 11:18:46 -0700: Checking file system2013-09-03 11:18:55 -0700: Checking Journaled HFS Plus volume.
2013-09-03 11:18:55 -0700: Checking extents overflow file.
2013-09-03 11:18:56 -0700: Checking catalog file.
2013-09-03 11:19:10 -0700: Checking multi-linked files.
2013-09-03 11:19:10 -0700: Checking catalog hierarchy.
2013-09-03 11:19:22 -0700: Checking extended attributes file.
2013-09-03 11:19:34 -0700: Checking volume bitmap.
2013-09-03 11:19:35 -0700: Checking volume information.
2013-09-03 11:19:35 -0700: The volume Steven Polanco Mac appears to be OK.
2013-09-03 11:19:35 -0700: Repair tool completed:
2013-09-03 11:19:35 -0700:
2013-09-03 11:19:35 -0700:
2013-09-03 11:19:39 -0700: Verify and Repair volume “Steven Polanco Mac”
2013-09-03 11:19:39 -0700: Starting repair tool:
2013-09-03 11:19:39 -0700: Checking file system2013-09-03 11:19:39 -0700: Checking Journaled HFS Plus volume.
2013-09-03 11:19:39 -0700: Checking extents overflow file.
2013-09-03 11:19:40 -0700: Checking catalog file.
2013-09-03 11:19:54 -0700: Checking multi-linked files.
2013-09-03 11:19:54 -0700: Checking catalog hierarchy.
2013-09-03 11:20:06 -0700: Checking extended attributes file.
2013-09-03 11:20:18 -0700: Checking volume bitmap.
2013-09-03 11:20:19 -0700: Checking volume information.
2013-09-03 11:20:19 -0700: The volume Steven Polanco Mac appears to be OK.
2013-09-03 11:20:19 -0700: Volume repair complete.2013-09-03 11:20:19 -0700: Updating boot support partitions for the volume as required.2013-09-03 11:20:29 -0700: Repair tool completed:
2013-09-03 11:20:29 -0700:
2013-09-03 11:20:29 -0700:

Files show in Disk Utility, but NOT in Finder

Hi there, having trouble with my backup drive. It's a 1TB WD My Passport Ultra.
The drive mounts in Finder, but is extremely slow. In Disk Utility, the drive shows the correct disk space usage and number of files;
but in Finder it only shows the folders/files at the root level of the drive, and each has a size of zero bytes with no items:
What is happening? How can I access the data (it's obviously still there if DU shows the files) and (possibly) fix this?

Also, Finder displays the correct disk usage at the root level:

External Hard Drive showing in Disk Utility - but not desktop.

A little background:
Yesterday, I moved my shelf where I have my modem, Airport Extreme, Airport Express and an external HD connected to the extreme to be a wireless HD for all users to access. Everything worked great - no problems whatsoever.
Problem: I have reconnected everything exactly as it was and reconfigured it as it was and now the external HD is having issues. When connected to the extreme, I can see it in the airport utility, but cannot gain access to it in that way. When I connect directly to my macbook, it is recognized by the disk utility, but does not appear on the desktop.
I don't know if this may have caused the problem, but I carelessly, unplugged the power bar for which all the above mentioned hardware plugs into when moving the shelf. Now, everything works as it did, except I can't get the express to show up once it is configured (but this isn't surprising as I had to fight with it the first time I configured it - not uncommon I am told), and the HD is no longer accessible via the network, or when directly connected to my macbook.
Help! According to the utilities, the data is still on the disk, I just can't access it in any way.

From the Disk Utility, select the drive and click on the Repair Disk(not Repair Permissions) button. If the Disk Utility finds a problem it can't fix, DiskWarrior or TechTool Pro will likely succeed.
(24355)

Mounted .iso file shows in Disk Utility, but inaccesible through finder

Hello.
I have an .iso file that used to mount flawlessly, but now when double clicked shows only in Disk Utility, while remaining inaccesible otherwise (finder hierarchy starting from computer should show all mounted drives, but this one is missing). Disk Utility doesn't find any errors. Is there any other way to find out what's wrong?
thanks

Do know the name of any file that is on the iso image? If so, do a Spotlight search on the file name and see if it show up. If it does, Command click on the result in the Spotlight list and see if the enclosing folder opens in Finder.
Francine
Francine
Schwieder
PS--Forgot to aske: when you said "shows in Disk Utility" I'm assuming it is shown not just as existing, but as being mounted.
Message was edited by: Francine Schwieder

Hard Drive Reads in Disk Utility but not in Finder

I have a Seagate FreeAgent hard drive that is configured to NTFS. I use software to read and write to this on my macbook pro. I have plugged my hard drive into my macbook this morning and it will only read in Disk Utility, and not show up at all in Finder. I have plugged it into another macbook and have the same thing. Tried to do disk repair and it said it was repaired and operating normally, but still not opening in Finder. I also tried it on a Dell running XP and same thing, doesn't open as a folder but shows as operating normally in the XP's disk utility equivalent. I have tried finding an answer elsewhere but can't come up with anything. Besides taking it for data recovery, is there anything else I can do or try to fix without compromising the data?
Message was edited by: jazmyn96

You might get more help were you to post in something like the MacBook or OS X forum. This forum is for OS 9, an archived Apple Macintosh operating system.
That said, it sounds like your drive might be dead. When you say that you can see it in Disk Utility, you mean that it shows up in the column on the left? When you repair it, can you hear the drive spinning up?
Can you try making an image of the drive to see what happens?

External HD shows up in Disk Utility but not in Finder.

I can also see the HD in the drive's software, but I can't use it or access the data, since it's not in Finder. This is on my iMac (mid-2011)
When I plugged it in to a different Mac, I was able to see it in Finder.
Any suggestions are welcome--thank you!

It may just be hidden If you hover over the word Devices in the sidebar is there a show option?
You can try to go to it Finder > Go > Go to Folder > /Volumes/Volume Name (type first letter and tab)
Try Mounting it from Disk Utility
Maybe repair from disk utility
Try alternate USB ports or cables, try to connect through a hub.

Drive visible in Disk Utility but not Finder. Why?

I have a PowerMac G4 (mirrored drive doors) with 4 hard drives installed. 3 of the drives are set-up in a striped RAID array and the other one is my boot drive with two partitions. One one partition, I have OS X 10.3 and I can see the RAID drive fine. On the other partition, I fresh installed 10.4 but the drive does not appear on the desktop. Strangly, I can see the drive in Disk Utility and it shows me the mount point. I can even unmount and remount it but it still does not show up in the Finder. I had 10.4 server installed prior to the fresh 10.4 (not server) install and that showed it fine. I tried to see the drive in Terminal but also does not appear. Why does my drive appear in Disk Utility but not the Finder?

BDAqua wrote:
Yes, it needs the path to the drive...
:-/ Yes, I got the command in completely with the path to the drive like it states in the other post. I have no idea why it didn't recognize the command as I'm not as familiar with UNIX/Linux commands as I'd like to be.
Anyways... I found the cause of the problem (incase it happens to anyone else). Here's what happened:
The ownership on the root of my RAID volume was set to be read/write for me (under my proper username) and no access for anyone else including Admin. When I installed a fresh OS, the default user was Admin (who had no access under the previous OS). If I would've taken the time to set-up my proper account (with the same owner name as my previous OS) then it would've been visible again but since I didn't see it under the default Admin account, I stopped there to troubleshoot. Another way to make it visible was just to change the access privileges from my previous OS to be read/write for other users (or at least Admin). I would think that checking the box for "Ignore ownership on this volume" would've remedied that but for whatever reason, it didn't.
Thank you for all your help. I did learn a little even if it wasn't the direct solution. Now if only I could get Disk Utility to restore my old image without giving me crazy errors... But that's another issue altogether. ;-D

I have a fat32 formatted drive (WD my passport 500GB) that is showing in disk utility but does not mount. I am using a macbook with mac osx 10.5.8.

Disk warrior came highly recommended on other posts but because the drive is not mac os formatted it won't do its warrior magic...
The drive shows in disk utility but the options to repair are greyed out. The drive ejects sometimes but not others. The drive powers up with light and I can hear noise (not loud just a hum that confirms (i think) that it is spinning.). The drive is as it cames and booted on both a windows XP pc and my macbook with mac os x 10.5.8.
I have tried test disk but after running for a day with no other command prompts other than the first recommend I uninstalled it.
Any other suggestions?

Hi Christina,
It's quite possible the AC PSU has given out, if It's only Bus powered as it appears, that's the worst idea ever & asking for eventual problems.
What Format is it?
Did you install any WD SW?
Your best bet is DiskWarrio...
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83

External Hardrive shows up in Utility but not on desktop

Hi folks. External hard-drive that used to show up fine (and was formatted for Mac prior to original use) does not show up on desktop or utility on my laptop. However, when I try it on a different computer it does show up on Utility but not on desktop. I ran "verify disk" in utility and it says it "appears to be ok." The firewire ports on the aforementioned computers, as well as firewire cable work fine with other devices. Finder is set to show external drives. Advice? Thank you.

By "utility" I assume you mean Apple's Disk Utility. If so, what is its version number & modified date shown on the affected Mac in Finder's "Get Info" box?
Are both computers (I assume they are both Macs) running the same version of Disk Utility & of the Mac OS? On the computer that recognizes the drive, what does Disk Utility say is the *partition scheme* of the drive? (This will only be shown if you select the drive & not the volume name indented under it in the device list on the left.)

Lacie Hard Drive Appears In Disk Utility But Not Desktop

Hello,
My Lacie hard drive was working fine till yesterday. It will appear in the disk utility but not on the desktop? I'm using a G4 with mac os 10.3.9. I have tried disconnecting the power and rebooting to no avail.
Any help?
Thank you.

Welcome to the forum.
Have a look at the comments on THIS THREAD. Perhaps there's something there that will help.

Files show up in downloads but not in Finder

Files showing up in downloads but not in Finder I am running OS X 10.9.5 on my MacBook Pro. I am having a problem with Finder being able to display all the files in folders, if any. The files show up in downloads for instance but when I go to my downloads in Finder, the folders are empty.

The screenshot doesn't show the downloads…
It may also help to know what you are expecting to see in there - for example Application XXYY says I downloaded AABB, but I can't see AABB.
Certain apps have their own settings for where to store files - more info needed.

Hard drive visible in Disk Utility but not on desktop

I have an external hard drive, one of a RAID 1 mirrored pair which I have been connecting to my computer with FW800. I was having problems as was using one of them for a while, which solved them. When I hooked them both up to my computer, they showed up as two separate drives rather than one drive like before (since they were mirrored). Now the one I have been using does not appear on the desktop but I can see it in Disk Utility, but can't fix permissions with it or even verify it. I've tried connecting with USB instead of FW800 but that has no effect.

already checked, there is a problem with my computer or with the external hard drive. Now a new esata array is giving me problems so I am starting to think there is something wrong with the computer.

Hard Drive not showing in Disk Utility (but showing fine on PC)

I have been using an 1TB USB powered Hard Drive with my MBP for a year or so.
I got a new 2 TB drive and loaded it and installed the seagate dashboard software.
At that point, it appears something may have happened to my HP and it no longer appears on my Mac or in Disk Utility. It appears to be getting power, and it shows up fine on a Windows PC.
Any thoughts??
This one is really baffling me?
Thanks

One other note
A folder called TheVoumeSettingsFolder now appears on the HP, in case that is causing the issue.
Thanks

My WD hard drive won't "mount" it shows in disk utility but can't be repaired. I'm thinking this is a software issue since the disk is being recognized.

I
I have a WD drive that won't "mount". Tried repairing, turning off and back on, unplugging and nothing has worked. Can anyone help?

The WD Passport has no independent power supply, relying instead on getting power from a USB port on the computer. AS the drive ages it can need more power to spin the platter and many USB ports on notebook cannot provid that much.
Anther issue is the WD drive itself. WD uses an odd proproprietary formatting scheme that makes the drive not always behave like typical Mac drives.
If the drive contains nothing you need to access, use Disk Utility to reformat it to "Macintosh Extended (Journalled)"
If the drive contains important data, there are a couple of inexpensive ways to get more power to it:
1) Get a "Y" conenctor cable like this:
http://eshop.macsales.com/item/OWC/USB2AYMBPB/
It draws power from two USB ports and ofter that is enough to make the drive work.
2) Get a powered USB Hub:
http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
It has its own power brick and that is usually enough to get an older USB external drive recognized.

Wd my book shows in disk utility but not in finder

Similar Messages

Maybe you are looking for