WD My passport not showing up on desktop when plug in

I've just brought a 500GB WD portable hard drive but when i plug it into my mac it isn't coming up on the desktop. The hard drive itself is making a noise when its plugged in, but nothing else is happening. How can i get my mac to recognise this drive?

Assume you are trying to connect via USB? Powerbooks don't put out enough juice on USB to power many devices. So, some won't even power up, and some may power up and still not be recognized. There are a few solutions:
1) Get a power supply for the external hard drive
2) Get a powered USB hub that your hard drive would plug into
3) Get a special USB cable that has two plugs to use both Powerbook USB ports
4) Connect via Firewire. With a Powerbook, this is preferred, because you can boot from a Firewire device, which you cannot do with a USB-only device.

Similar Messages

  • Kindle does not show up as device when plugged in USB

    I was trying to transfer some files to my Kindle using the USB port. I have a Kindle 2, and a Rocketfish Micro USB cord. The Kindle does charge up so it is drawing power through the cord. But the Kindle does not show up as a device attached to my MacBook. My external HD (Firewire) and iPods (USB) all work perfectly through this USB hub.
    I did call Apple (using my 30 day warranty for installing Snow Leopard) and the tech support person did not even know what a Kindle was.
    Amazon says it's an Apple problem.
    Apple doesn't seem to have any clue.
    I've seen from various threads that USB devices do seem to have intermittent problems. Is the Kindle one such device?

    Some devices do not work properly through a hub. Plug the kindle directly into your Mac and see if it works. Just because some devices work through a hub, doesn't mean all devices work through a hub. Apple does not support third party devices or third party hubs.

  • HT1481 ipod shuffle 2nd generation, does not show up in window when plugged into itunes. Also, does not charge(no light comes on).

    I have a ipod shuffle (2nd generation) that won't light up when plugged in to the power adapter. I have only used it a few times since I purchased it years ago. Also, when I plug it into my computer with itunes running, it isn't recognized at all, as in nothing happens when I plug the usb cable with ipod attached and on to it. Any help would be much appreciated.

    but there is another unspecified error.
    What is that error?
    Are you sure she has a Shuffle? You mentioned a Sad Face.. that would indicate that the iPod has a display, which a Shuffle does not.
    B-rock

  • My iPhone 4 is not showing up on computer when plugged in, yet it shows up on iTunes. I have a windows computer.

    .

    Which Mac OS X do you have installed?
    With iTunes open, from the menu bar click iTunes > About iTunes
    The latest version is 10.5.2

  • USB Drive and iPod do not show up on desktop

    Hello,
    I put the computer to sleep when I'm going to be away for awhile and overnight. When I come back and wake it, my USB drive does not appear on the desktop. I have to restart the iMac to get it to come back.
    Also, when I plug my iPod in, iTunes updates it and then within 10 minutes, the icon does not show on the desktop but I can see the iPod in iTunes.
    Any ideas?
    Thanks,
    Brad

    I did run the hardware test and everything passed.
    For about 3 hours last night, everything was working fine. This morning the USB drive icon is there but not the iPod. I think I will try the OS reinstall but not for about a week. I will be out of town all next week and can't get to it before I leave.
    Something may have gone wacky while loading some application. A couple of the suspects would be Adobe Lightroom beta 4 or Google Earth. This issue only started within the last 5 days or so and I think those are the only applications I've loaded in that time.
    Thanks for the help in eliminating some of the culprits. I think the OS install should fix. If not, it may be time to have Apple take a look.

  • Network drives do not show up on Desktop or in Sidebar

    I have a user who is experiencing a weird problem. When they connect to a Windows server over our LAN, the server does not show on their desktop, nor does it show in the sidebar.
    I have checked the boxes in Finder/Preferences to show network drives on the desktop and in the sidebar, but the network drives do not show up.
    I have reproduced this on another Mac, a G4 also running 10.5.8 .
    The windows servers do appear in Go/Network, and the user can connect to them, but they still don't show up on the desktop or the sidebar.
    Does anyone have any good ideas about this?
    Thanks in advance!

    Templeton, I'm sorry if my message wasn't clear, but I have already tried that.
    I'm beginning to wonder if there might be some issue with this in 10.5.8, since this works on the Macs here with Snow Leopard, and it used to work when we had Macs on earlier versions of OS X.
    Again, I'm open for any ideas on this.

  • Hard drive not showing up on desktop

    My hard drive is not showing up on desktop. Hardisc repair says drive is not formatted yet would not format drive or failed after initial attempt. I did put the same drive into USB external case and then it showed up on desktop. I then was able to format disc and install OS 9.2 onto disc but when I reinserted disc into Lombard (Powerbook G3 M5343) it was back to not appearing and identifying disc as not formatted.
    When I turn on -getting a prompt that says built in memory test says there is something wrong with memory cashe could this have something to do with problem?
    I don't think there is a problem with Motherboard as I just replaced it. I also don't think it is the drive cable as it identifies drive and also I have a "spare-parts" Lombard with a defective motherboard and I tried attaching drive with that drive cable and still had the same problem. Unless both drive ribbons are defective -I assume not...but maybe that could be the problem?
    Any ideas?

    Richard,
    You do have a failure of the backside L2 cache, a common problem on the Lombard. This memory is soldered to the microprocessor card and the only fix is a replacement card.
    http://docs.info.apple.com/article.html?artnum=51159
    I don't know if the failed L2 cache memory would cause a problem with the HD on the internal IDE bus controller; it apparently does not via the USB bus.
    Generally, users who have the failed L2 cache do not have a successful startup unless they reset the power manager. Try this: With the Lombard turned off, reset the power manager and see if it will start up to the internal HD. If no success, shut down, insert your OS 9.2 CD, reset the power manager, and see if the HD appears on the desktop after booting to the CD.

  • Why are my files not showing up on desktop?

    I was running several programs on my macbook air: iChat, iCal, Mail, Word for Mac, Safari, and Finder. In Safari, I would right click on any file (word, powerpoint, pdf, etc) to download it to desktop as I normally would. All goes well until I actually go to desktop and see nothing. The file does not show in my desktop. I go into finder, pull up the desktop folder and the file is there. Here's the catch: files downloaded to desktop from other sessions show up in both locations (actual desktop and desktop folder in finder) but the new ones do not. Forcing all my programs to quit doesn't help, only restarting the system does and then the files show up in my actual desktop as opposed to only the desktop folder. I feel like this is rare and only happens when I have iChat open in addition to other programs (although I'll be doing more tests to confirm). I'm running the latest OS (Lion) on a Macbook Air. Anyone else seeing this issue or know what's going on?

    Hello, MMars12. 
    Check to see if this feature is enabled by going to Settings > Notification Center and under Access On Lock Screen make sure Notifications View is On. 
    iOS: Understanding notifications
    http://support.apple.com/kb/HT3576
    Cheers,
    Jason H. 

  • After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

    After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

    I have a TB internal drive, but this is what it shows for memory slots:
    Memory Slots:
      ECC:    Enabled
    DIMM Riser B/DIMM 1:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser B/DIMM 2:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser A/DIMM 1:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x42076007
    DIMM Riser A/DIMM 2:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x4207631E
    DIMM Riser B/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser B/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty

  • I installed a new hard drive on my mac book pro and it is not showing on the desktop

    Installed a new SSD hard rive because the old one died. It is not showing in my desktop so I can transfer my files ( decided not to use time machine but to transfer manually.
    On the preferences window, the startup disk is showing with a question mark but when I click on it, it shows the hard drive , which has already been initialized and the OSX ( Mavericks) installed.

    "it shows macintosh HD OSX 10.9.5 but the hard drive that is supposed to be in the upper right corner is not showing up. So it is booting from that drive."
    Ok go to "Finder" preferences and make sure the "Hard disk" box is checked.
    That will make your boot disk show up in the upper right corner. You can tell it's a boot disk because all the files will look like this instead of just being blank files.

  • How do I eject a dvd that does not show on the desktop

    How do I eject a dvd from the drive when it does not show on the desktop?  I tried restarting and the drive makes noise but does not eject the dvd.

    oldlarry wrote:
    How do I eject a dvd from the drive when it does not show on the desktop?  I tried restarting and the drive makes noise but does not eject the dvd.
    Hold down the mouse button while restarting. This should eject any disc in the drive.

  • Muse not showing contents of Desktop on Tablet & Phone pages

    My Muse 3.1 is not showing contents of Desktop on Tablet & Phone pages... how do i brought them to Tablet & Phone pages?
    Desktop View
    Tablet View
    Phone View

    Thanks Bob for the reply...
    i was just stuck on that part only.. now its clear.
    What I thought that Muse is automatically copy all the contents from Desktop to Tablet & Phone layout.
    Now we have to copy & paste the layout from Desktop.
    Thanks for help.
    Sanjay

  • Why are my desktop files not showing on the desktop

    Why are the files in my desktop folder not showing on my desktop?

    An add-on can put its icon on the bar automatically if it likes, but some add-ons do one of the following:
    * Add an item to the Tools menu
    * Add an item to the right-click menu (depending on the context)
    * Put a button in the button palette so you can add it to a toolbar if you like (''to call up the button palette, use'' View > Toolbars > Customize ''or right-click a blank area after the address box on the Navigation Toolbar and choose Customize from the pop-up menu'')
    Also, you might want to double-check that the add-on is enabled.
    Tools > Add-ons > Extensions
    If you have the orange Firefox button, it's Firefox > Add-ons > Extensions
    Does that help? (If you have problems with a particular extension, you could mention which one it is for more specific comments.)

  • I just purchased a new iMac and my Hard Drive is not showing on my desktop.

    I just purchased a new iMac and my Hard Drive is not showing on my desktop. It doesn't show up on a finder window either.

    No.  It's what I've named my boot drive.
    New Finder windows can be set to open any selected volume or folder of your choice.

  • I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    Please then use your web Browser  address http://www.adobe.com/  and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
    Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
    Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in  using the account that has the subscription the one you used above to Activate Photoshop.

Maybe you are looking for

  • I have to send mail to multiple recipients. Is there a group send with Thunderbird as I have delivery problems.

    My email is a yahoo account. The yahoo help advises I create a group then I won't have the problem. Can I do this in Thunderbird or do I have to use yahoo?

  • IPhoto 08 Unable to Export

    My hard drive is partitioned into three drives, a primary boot drive, a secondary boot drive, and a swap drive. My iPhoto library sits on my swap drive which has plenty of free space. I recently imported a modest number of photos (~200), made a few i

  • Like returns rows which do not macht if using NLS_SORT='BINARY_AI'

    Hi, I have a table with a nvarchar column in Oracle Xe 11. Using a select with like rows are returned which do not match the like condition. E.g. 'CR_abc' LIKE 'CR,%' is true for NLS_SORT=BINARY_AI. For GERMAN_AI the condition is false! Example to re

  • Message No 06076 ordered in full

    Hi,     I have defined error message for message no 06076 Materials of requisition & item & alr. ordered in full, But it is only giving error in ME21N and ME22N transaction. For end user enjoy transaction is not allowed.    How can i set error messag

  • Extra Page

    I have converted a form from a word document and was able (during the process) to make it 3 pages instead of 4 pages.  I did not notice the extra page until it was completed.  I have tried to go back into LiveCycle to delete the page and it will not