WD Mycloud 4TB fell down from table and hearing click sound
WD Mycloud 4TB fell down from table and hearing click sound for few times and hearing no sound, Please help me on how to recover my data from this drive? I see red light come up after a while.
Sounds like the drive has been damaged if your hearing a clicking noise from the hard drive. If you have an ongoing SafePoint backup you should be able to access the last SafePoint backup to recover or access the files that were last backed up from the WD My Cloud. If the drive is no longer accessible after doing a soft reset (press and hold the reset button for 4 seconds) or a system reset (press and hold the reset button for 40 seconds) then chances are high the drive is either damaged or the unit is bricked. You have two basic options but there may be others.Contact WD and enquire about data recovery and warranty repair/replacement of the possibly damaged drive.Void the warranty and remove the drive from the WD My Cloud enclosure connect it to a computer (like through an external SATA enclosure/docking station or via a desktop PC) and use a Linux boot disk distro or a Linux OS (possibly even a Mac) to access the hard drive and possibly its contents.On a side note same thing happened to a family member. Thier WD My Cloud got knocked off a shelf onto a stone floor and damaged the hard drive. The impact was hard enough to knock the white cover off the WD My Cloud. Drive was pulled but was erratically recognised by Linux and the data was non recoverable (with the tools I had on hand) from the drive. Took a spare unused SATA drive and followed one fo the various threads (like this one or this one) on recovering a bricked or replacing the hard drive on a WD My Cloud and had the WD My Cloud back up and running some time later. The work around in the future is to use the SafePoint feature of the WD My Cloud user interface to backup the WD My Cloud to another hard drive like an attached USB drive. that way you provide some data redundancy in the case of the WD My Cloud hard drive becoming unreadable/unusable.
Similar Messages
-
My iphone 5 fell down from the table and now I can't touch screen or do anything with it anymore. I send it to Istudio in Thailand and they said it is non authorized so they will not fix for me. I search google and they said that my LCD has problem but people in here said the chip inside my phone have problem??? Please tell me what I need to do. And if I have to change the new, how can I know it is new or fake? Could you give me the price of it please? I'm not Thai people. I study in here so I dont know where to fix it. Please recommend me any truthly store in there if you know. Thank you so much!!!
You will need to wait for Apple to rectify the issue. Do not make changes at your end.
https://www.apple.com/support/systemstatus/ -
my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...
Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.
-
Fetch data from table and generate attachment than mail it.
Hello Experts,
From couple of day I am searching on Google for a better database procedure that will help me to get data from tables and generate attachment and mail it but i fail.
My Scenario is:
I have a query that will fetch almost 5000 records from database tables. Each record has almost 75 characters
select a.location_code,
a.item_code,
b.description item_desc,
to_char(a.manufact_date,'ddMonyy')mfg,
to_char((a.manufact_date + nvl(b.expiry_period,0)),'ddMonyy')expr,
to_char((a.manufact_date + nvl(b.qurantine_period,0)),'ddMonyy')qrtn,
round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) days_elapsed,
a.closing_balance_posted quantity
from wms_stock_current_balance_v a, wms_item_setup_mast b
where a.closing_balance > 0
and a.item_code = b.item_code
and a.loc_type in ('RACKING','PICKING','QUICKA','BUNDLED')
and nvl(b.qurantine_period,0) > 0
and round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) <= 0
order by a.item_code, a.location_code;
Sample data of above query is
LOCATION_CODE
ITEM_CODE
ITEM_DESC
MFG
Expiry
Quarantine
Days Elapse
Quantity
13DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
14DL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
134
14DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
14DR2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
20
14LL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17ER2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17GL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17SL0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
64
18QL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
19AR5
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
160
19DL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
19JR0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
60
19TL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
20GR2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
40
36FL3
000000000000000F0487
CLEAR COOL BLACK 05ML
18-Feb-10
29-Mar-14
2-Jun-13
-124
65
19UR0
000000000000000F0591
COMFORT WHITE 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
1
12SL1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
12SR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
14OR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
8
36EL4
000000000000000F0594
CLEAR HF DECRASE 5M*360
14-Feb-10
14-Feb-11
12-Oct-10
-1088
14
13VL1
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
160
14ER0
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
105
Database Info
Oracle 10g
Version 10.2.0.1.0Look at the sample code for generating a CSV file that I've just posted in response to a similar question:
Re: How to execute a proc and spool files in a database job
And the use the search button in this forum to find sample code for sending a CLOB as a plain/text e-mail attachment using UTL_SMTP. -
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach. -
my ipod 4 fell down to floor and turn to white screen,can't switch on...how can i solve the problem??please help me
That symptom is covered here. However, you may have a hardware problem caused by the drop. and an appointment at the Genius Bar of an Apple store may be in order.
iPod touch: Hardware troubleshooting -
WebDynpro Java: how to remove blank element from Table and Dropdown.
Hi Folks
In a webdynpro application,
I created a table and witten the below code to populate the table
IPrivateDummyView.IFirst_TableElement First_Table_Element = null;
First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
First_Table_Element.setF_Value("One");
wdContext.nodeFirst_Table().addElement(First_Table_Element);
First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
First_Table_Element.setF_Value("2");
wdContext.nodeFirst_Table().addElement(First_Table_Element);
As per the code, i got 2 row in the table.
But , i have one Empty row on top of the table , how to get ride of this.
i find the same problem happening with dropdown too, where i used DDBI, i populated a the content as mention, but i initial 2 row as blank and then i have my own elements ,as per my code.>
> how to remove blank element from Table and Dropdown
>
Change selection property of related node to from 0..1 to 1..1 (mandatory)
Re: DropdownByIndex and empty line (Thread: DropdownByIndex and empty line )
Re: Can the empty selection be removed from element dropdownbykey(Thread: Can the empty selection be removed from element dropdownbykey )
Edited by: Anagha Jawalekar on Nov 18, 2008 10:28 PM -
Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.
Did your computer crash or did Firefox crash causing the loss of the bookmarks?
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes -
Problem with rotation and keyboard click sound
Ok, there's still a problem with the rotation and keyboard click sound and I thought I had the problem fixed.
It's a serious bug when you want the keyboard click sound enbabled without having the rotation locked. I noticed this bug started when I had the previous iosinstalled 7.0.6.
Everytime I wanted to enable the keyboard click sound, I have to always go to settings and have lock rotation checked. And it would stay locked.
If I wanted to rotate my iPad, I have to have mute enabled, but no keyboard click sound.
I know it sounds confusing. I'm already confused... beh.I completely forgot about that.
Thank you! -
White screen and a clicking sound MBP 13" mid. 2010
My MBP don't start. It's a white screen and a clicking sound, no more avctivity.
Macbook Pro mid. 2010.
Any one know what the problem is???EmmaAastrand wrote:
Oh no.
It cost a lot of money huh?
it really depends on what exactly the problem is. take is to an Apple Store or AASP and have them look at it
But what have I done to get this problem? I don't understand.
You may not have done anything. Parts can go bad on their own. -
How create report with data from table and some columns results function ?
Hi,
How can i create on apex report region with some columns (of the report) as returned from a table and the other columns as results of plsql functions ?
for example , I want to create a report like that:
device last_date error_msg stop/start
kodak1 06/04/08 null >>
kodak2 08/03/08 good msg --^--
kodak3 08/04/08 err msg >>
3 rows returned
where the 3 first columns are data returned from the table and the forth column is the result of plsql function (returned for example false) and on that i want to display a button of start ( >> in this example ) or stop ( --^-- in this example)Thomas,
There is no problem here -- this is fully suported scenario.
1. Bind Table dataSource to Customers node.
2. Bind individual cell editors to any attribute of customer or any nested node like Address, say create column with InputField as editor, then for "value" property select Customer.Address.Street.
Your nested nodes (like Address) must be non-singleton, set singleton=false on context designer tab.
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com -
I AM TRYING TO IMPORT CHARACTERS FROM A TAB DELIMITED FILE INTO A TABLE ON LABVIEW. ONCE THE DATA IS IN THE TABLE I WANT TO BE ABLE TO SELECT INDIVIDUAL STRINGS FROM THE TABLE AND PLACE IT IN A NEW TABLE. WHEN I CLICK ON A STRING I WOULD LIKE THE SELECTED STRING TO SHOW IN A TEXT BOX LABELED 'SELECTED STEP' AFTER ALL THE SELECTED STRINGS IS IN THE TABLE I WOULD LIKE TO SAVE THE NEW TABLE AS ANOTHER SPREADSHEET -- TAB DELIMITED -- FILE, MAKING IT ACCESSIBLE TO OPEN. HERE IS WHAT I HAVE SO FAR. I CAN INPUT DATA INTO THE TABLE, BUT I CAN ONLY TRANSFER ONE STRING INTO THE TABLE I WOULD LIKE TO BE TO INPUT MULTIPLE STRINGS. ALSO WHENEVER I TRY SAVING THE FILE, IT ALWAYS SAVES A UNKNOWN FILE, HOW CAN I GET IT TO SAVE AS A SPREADSHEET FILE. THANKING ALL OF YOU IN ADVANCE FOR YOUR HELP!!!!!!
Attachments:
Selector.zip 30 KBPondered,
The question you are asking is the same one that you asked in: http://forums.ni.com/ni/board/message?board.id=170&message.id=132508#M132508, to which I supplied a revised version of the original vi you used (which was modified from the original one I supplied to an earlier thread). A couple of questions: 1) What does my latest not do that is in your question, 2) Why are you starting yet another thread about the same problem? We are here trying to help, it makes it a lot easier if you keep the same problem in the same thread, it reduces duplication of effort from those that might not have been following the previous thread(s). Those of us that don't have our "names in blue" are just doing this "for fun" (the blue names are NI employees, who may still be doing it "for fun"), and it makes it more fun if it doesn't seem (correctly or not) that our attempts are ignored. If an answer doesn't help, or seems incomplete, post a little more detail to the same thread so that the original respondent, or someone new, can provide more information, or understand your problem better.
P.M.
Message Edited by LV_Pro on 07-20-2005 01:20 PM
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
Permissions disappearing from tables and views in SQL Management Studio
As a CRM person, I sometimes have to update the database to cope with custom reports that I have written. Usually, I will
Go into SQL Server Management Studio 2008
Open the database
Locate either the table or the view
Right click on permissions
Add in the role or user that's needed
Grant them Select permissions
This allows the report in CRM to access the database and this works.
The problem I have is that after a certain amount of time, the user or role will disappear from the permissions meaning that the report will not run. Sometimes, this can be as soon as a couple of days or it can be months. It happens on views more than tables
and, whilst it's not too difficult to put the permissions back, it is annoying for the users.
I don't use SQL Server Management Studio very regularly, only to write a few queries and set up these permissions so I'm not sure if there's anything else in there that might be doing this. All suggestions would be very welcome.
Thanks.Sounds like some process is removing/resetting permissions periodically
if you are using enterprise edition you could try to catch this using auditing
http://technet.microsoft.com/en-us/library/dd392015%28v=sql.100%29.aspx
otherwise you would need some other custom tracing mechanism (SQL Trace, Extended Events, catching statements.. not fun)
Andreas Wolter (Blog |
Twitter)
MCM - Microsoft Certified Master SQL Server 2008
MCSM - Microsoft Certified Solutions Master Data Platform, SQL Server 2012
www.andreas-wolter.com |
www.SarpedonQualityLab.com -
Business Graphics from Table and Series UI Element
Hallo experts,
i try to provide a business graph, but have some problems with functionality of Series UI Element as i suppose.
At design Time i don't know how many series i have, it's depend on data wich i get from table. So as i found for this i can use Series UI Element instead of SimpleSeries.
So i in Layout i have following structure:
Categorie
Series(List)->SeriesPoint->Numeric Value
In Context:
MainNode with following children:
Date attribute (String)
SeriesNode with following children:
Name(String)
PoinNode with attribute:
(Integer) Summe
I set singelton of PointNode and SeriesNode to false;
Date Attribute is mapped to Catergorie
(Integer)Summe to Point Value
SeriesNode to to Series(List)
Here is part of code how i generate elements of some Node:
for(int m=0;m<allCodelineNames.size();m++){
String name=(String)allCodelineNames.get(m)
IPublicChangeList.ISeriesElement elem=
(IPublicChangeList.ISeriesElement)
wdThis.wdGetChangeListController().wdGetContext().nodeSeries().createSeriesElement();
IPublicChangeList.ISeriesPointElement elem2=
(IPublicChangeList.ISeriesPointElement)
wdThis.wdGetChangeListController().wdGetContext().nodeSeriesPoint().createSeriesPointElement();
LinkedHashMap result=(LinkedHashMap)codelineMap.get(name);
elem.setCodelineName(name);
int changeLists=Integer.parseInt((String)result.get(date));
elem2.setChangelistSum(changeLists);
wdThis.wdGetChangeListController().wdGetContext().nodeSeriesPoint().addElement(elem2);
wdThis.wdGetChangeListController().wdGetContext().nodeSeries().addElement(elem);
The problem is so that i still don't see different series i see only the first one.
Also it's not clear how the mainNode knew which nodeSeries elemnts it had
i also tried to implement this way;
statElem.node().getChildNode("Series",i).addElement(elem);
where statElem is element of mainNode, but it makes no difference
Have you have any ideas, could it be that i make something generell wrong with this UI Element?
Thank you in advance!!
Best Regards,
Daria
Edited by: Daria Sosunova on May 30, 2008 8:56 AMHi Daria
Good news so far: layout structure is correct
>
Daria Sosunova wrote:
> So i in Layout i have following structure:
> Categorie
> Series(List)->SeriesPoint->Numeric Value
However the context structure should be a little bit different (if I understand your structure correctly)
>
Daria Sosunova wrote:
> In Context:
> MainNode with following children:
> Date attribute (String)
> SeriesNode with following children:
> Name(String)
> PoinNode with attribute:
> (Integer) Summe
This is how it should be:
<ul>
<li>MainNode (for categories, singleton=true)</li>
<ul><li>Date attr (String)</li></ul>
<li>SeriesNode (for series, singleton=true)</li>
<ul>
<li>Name attr (String)</li>
<li>PointNode(for points, singleton=false)</li>
<ul><li>Summe attr (Integer)</li></ul>
</ul>
</ul>
Mapping should be done like this:
<ul>
<li>Date attr to Category->Description</li>
<li>SeriesNode to BusinessGraphic->seriesSource</li>
<li>PointNode to SeriesList->PointSource</li>
<li>PointNode to SeriesPoint->ValueSource</li>
<li>Summe attr to Values->Value</li>
</ul>
That's it for design time. As for code it should generate series like this:
ISeriesNode nodeSeries = wdContext.nodeSeries();
for(int j =0; j<seriesAmount; j++){
ISeriesElement seriesElement = nodeSeries.createSeriesElement();
nodeSeries.addElement(seriesElement);
seriesElement.setName("Test "+j);
IPoint2Node nodePoint2 = seriesElement.nodePoint2();
for(int k=0; k<pointsAmount; k++){
IPoint2Element point2Element = nodePoint2.createPoint2Element();
nodePoint2.addElement(point2Element);
if(k==4 && j==0)continue; // skip fifth element
point2Element.setValue(""+(1+j*10 + k));
Set seriesAmount=allCodelineNames.size() and pointsAmount=amountOfCategories to get what you want.
I know that it's not very easy to understand but it works
Regards
Ivan Dulko -
Calling procedures from table and apex
Hi
I have a stored procedures and I want to put my stored procedures in table and I want to call store procedure from table in apex. how can I do this?
For example
I have stored procedures like Students(year number,birimno number)
GPA(birimno number,studentno number ) Student Procedure and GPA proecdure retrieve name and lastname
and I want to create a table
table has
Id Package Procedurename Arguments Header
1 GPA birimno, studentno name, lastname
2 Students year, birimno name,lastnameSo how can I do like this ? I want to call storeprocedures on APEX with selectlist. Selectlist will has a storeprocedures .
Edited by: esra aktas on 06.May.2011 01:48
Edited by: esra aktas on 06.May.2011 01:48
Edited by: esra aktas on 06.May.2011 04:08I am beginner pl/sql .
I had searched execute immediate for helping my problem.
My purpose is that I want to collect all of procedures in one table. And I must retrived which I select procedure on APEX Selectlist.
So I started to create a table which name is procedures and I put my procedures names on it.
Now how can I execute to procedures that name is in table?
create or replace
procedure "ISINIF_BASARI"(normalyariyil number,birimno number )
IS
ogrenci_no VARCHAR2(12);
ders_kodu VARCHAR2(12);
ders_adi VARCHAR2(50);
harf_kodu VARCHAR2(4);
CURSOR c_basari IS
select dk.ogrenci_no,da.ders_kodu,da.ders_adi,dk.harf_kodu
into ogrenci_no,ders_kodu,ders_adi,harf_kodu
from ders_aktif da,ders_tanim dt, ders_kayit dk
where da.ders_kodu like birimno ||'%'
and (dt.normal_yariyili=normalyariyil
OR dt.normal_yariyili=normalyariyil+1)
and (da.acildigi_donem='1' or da.acildigi_donem='2')
and dt.ders_kodu = da.ders_kodu
and dk.acilan_ders_no = da.acilan_ders_no
BEGIN
FOR I IN c_basari LOOP
dbms_output.put_line(' OGRENCI NO '||I.OGRENCI_NO||' DERS KODU '|| I.DERS_KODU||' DERS ADI '||I.DERS_ADI||' HARF KODU '||I.HARF_KODU);
end loop;
end;I have procedure like that.
and I have a procedures table. And I put the procedure's name in table.
procedure
id procname
1 ISINIF_BASARI
Now I want to call procedure using this table .
When I call yhe procedures from table I wrote like this. But it has faults.
create or replace
PROCEDURE CALLSPFROMTABLE as
v_sql_exp VARCHAR2(100);
BEGIN
v_sql_exp :='begin'||'select p.procname from procedure p where id=1'||'end;';
end;Edited by: esra aktas on 07.May.2011 02:19
Maybe you are looking for
-
Hi All, I have a scenario where in I need to download data from an Info Spoke. I am able to download the data and save it, but the file which is getting saved is not having the column names. Ineed to have the columns also in the saved file. Can someo
-
Where can I get the 64-bit version of AMSCheck
Hello, I'm using the Linux version of AMS 6.0.3 on a 64-bit machine. I'd like to use the AMSCheck tool but noticed that unlike FLVCheck, the AMSCheck tool was delivered as a 32-bit executable (even thought I downloaded the 64-bit version of AMS): /op
-
Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!
-
Problematic iBook needs to be repaired AGAIN!
I have 12 inch 1GhZ G4 iBook. I bought it in May of 2004, and since then, it has had its logic board repaired twice within the last year. The problem is that the display stops working. I hear the fan, but the screen remains blank. I was told the logi
-
Trouble connecting iPhone 6 to iPhoto 9.6
After upgrading to Yosemite OS, my iPhone 6 has trouble connecting and downloading photos to iPhoto. When I connect the iPhone 6, it recognizes it, I then click on "Import Photos", and it begins downloading the photos, and almost immediately stops w