WD Tv live - Problema condivisione file

Ciao a tutti,sono un felice possessore di Wd tv live da ormai un anno e devo dire che mi trovo benissimo. Fino ad ora ho utilizzato l'apparecchio collegato ad un hard disk esterno senza problemi. Da qualche giorno però ho tentato di collegare il WD tv live al computer attraverso rete lan.Riesco a collegare la rete senza problemi tantè che il computer vede il WD tv live e viceversa. Quando però tento di visualizzare un file dal WD tv live (per esempio un video) nel momento in cui clicco sulla cartella condivisa ricevo un messaggio di errore: "la cartella non contiene file multimediali". In realtà nella cartella ci sono molti video per cui non capisco dove sia il problema... Ho tentato di trovare una soluzione leggendo alcuni forum online. Ho visto che qualche altro utente ha avuto lo stesso problema ma nessuno sa aiutarmi.... Grazie

Ciao a tutti, Stesso problema con le connessioni tra PC con Windows 7 e Wd Tv Live appena acquistato. Dal PC vedo perfettamente il disco fisso collegato al Wd Tv Live ma se lancio dal Wd Tv Live Video-->Condivisione di rete-->Windows condivisione di rete appare un riquadro nero con al centro una freccina arancio curva che gira all'infinito senza trovare dispositivi in rete. Cos'è che è sbagliato sulla condivisione in rete delle cartelle del PC con Windows 7, ho condiviso le due cartelle che mi interessano con le autorizzazioni di scrittura e lettura su rete domestica? Possibile che nessuno riesca a dare una risposta esaustiva a questo problema? Ho visitato tutto il forum ma non ho trovato nulla che potesse risolvere il mio (e a quanto pare non solo mio) problema. Non vorrete obbligarmi a comprare un NAS?Concludo dando la configurazione della rete:Wd Tv Live connesso in Wi FiPC Windows 7 connesso via LanPC Windows Vista connesso in Wi FiSitecom Gigabit modem router N300 x4 Vi prego... è un peccato non sfruttare le potenzialità di questo giocattolino!

Similar Messages

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

I am using Windows XP SP3, I have problem with file download while resuming downlod giving error "file...could not be saved, because the source file could not be read." Please help me

I am using Fire Fox 5 beta version. After pausing the long file download, when I press the Resume download button the above message appear each time asking "Contact to Administrator". This problem was not with Fire Fox version 3 and above. Please Help Immediately. Thanks in advance...

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
* http://kb.mozillazine.org/Unable_to_save_or_download_files

Problem with File Based replication in Weblogic Express 10

Hi,
          We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
          We are using File based session persistance in weblogic.xml
          We have a shared location for all the three servers where we will be sharing the Session data.
          When we start the application, its works fine and is very fast, but after sometime the application slows down.
          Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
          When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
          Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
          We cannot used Inmemory replication as our Appl doesnt support it.
          Please advice as it is a major show stopper in our Production Mirror env.
          Weblogic Consultant

It is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
          More details are here..
          http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
          Jayesh
          Yagna Sys

Director 12- can't create a windows projector - problem writing file error

I am trying to create a windows projector of a project. when I get the following error - problem writing file - file name- Can't compress file that has been modified and not saved. The file has not been modified and has been saved. Any help would be great.

Hi.
You say you have tried publishing to a new empty folder. From the video I can see that the folder has table1.app in there (25 secs in) which is a Mac projector that has been published.
Yet you have Windows Projector checkbox ticked at the start of the video.
I publish Mac and Windows projectors to entirely seperate folders as a matter of practice.
I call the folders "Published" and "PublishedMac" and that is where the respective projectors for each piece of software lives.
Perhaps there is some mix up between Mac and Windows publishing that is going on because
you are publishing both to the same folder?
Hope this helps.
Richie

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Problem in file content conversion from XML to CSV

Hi Experts,
I am finding problem in file content conversion. I need to convert the following XML file into CSV file:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_CROSS_REF xmlns:ns0="urn:dabur:idoc2file:pos">
      <Update_type>2</Update_type>
      <PLU>00000000</PLU>
      <Cross_ref_PLU>7777777</Cross_ref_PLU>
      <Capture_PLU />
      <Package_size />
      <Package_desc />
</ns0:MT_CROSS_REF>
The output file data has to be like:
2,00000000,7777777,,,,
The problem I am facing is while specifying the content conversion parameters in communication channel i dont know what recordset structure i should mention as all the records are directly under root. If I mention recordset structure as "ns0:MT_CROSS_REF" and parameters as
ns0:MT_CROSS_REF.fieldSeparator   ,
ns0:MT_CROSS_REF.endSeparator    'nl'
i get error in communication channel monitoring and no file is posted.
Please help me as to what correct parameter i should mention in my case.
Thanks,
Regards,
Yash

Hi Chirag,
I cannot change the xml file as it comes after mapping idoc to a message type. How can I add ROOT in the xml? My message type is like MT_CROSS_REF and it has those 6 fields as in the XML (Update_type, PLU etc.). I do the mapping of these fields from a IDOC and get the XML.
I hope you got my point.
Thanks,
Yash

I have problems transferring files from PC to Mac and from Mac to Mac

I have problems transferring files from PC to Mac, and from Mac to Mac. PC to PC is fine. Nothing but problems with the Mac. One example:
While working on my PC, I open shared folders on an external HDD connected to the Mac. I click on paste to move the files. I get an error after a few seconds to a minute of trying to move several files from my PC Win 7 to Mac OS Maverick, that there is a file already at the destination on Mac. This statement is true, but it was just put there because I am copying them over in that same action. It reads 0Kb and wasn't there before I started. Then I get an error: The Action Cannot be completed because the folder is open in another program. Close the folder or file and try again..
Whether I click on it a bunch right of way or wait, it still takes about 45 seconds. I have to do it with every file and it only happens when copying from a PC to Mac. I have even restarted both computers so nothing is using any files. If I copy one file at a time, I don't get any error.
So I have one file to move, no problem. If move 5 files, The first will go fine, but it shows all 5 files in folder at once. All other files than the first show 0kb. I get the file already existing error once it starts the second file transfer, and I select move and replace. Then I get The Action Cannot be completed because the folder is open in another program. I wait or click repeatedly until it starts to move file. That file will then show something other than 0kb. When it is done, the error process starts all over. I tried checking the PC with unlocker, but the files do not show themselves locked on the PC.

Its not only French. Even certain characters in English will come across as gobblydegook from 1 platform to another. I see this in emails that likely were composed in Word & the characters don't come across.
Not sure if this is still true, but years ago someone explained that there is a standard character set & then I think its extended characters & those vary from platform to platform or language to language, etc.

Unable to download from AppStore, updates,etc.Messages 'the installer is damaged' to 'there might be a problem with file ownership and permissions.' I am the owner and only user of a new MBP. What could be going on?

Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
I installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech. Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.' All fail and I'll probably have to call Apple again. I am frustrated beyond words. Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

Which computer? Which Windows?
What are you trying to do?
-Jerry

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

Problem with file permissions

Hello all,
I am making a simple HttpServlet, which takes input
from html page and saves in to a file, but I'm having a
bit of a problem with file permissions.
I'm getting the following exception
java.security.AccessControlException: access denied (java.io.FilePermission ./data/result read)
     java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     java.security.AccessController.checkPermission(AccessController.java:427)
     java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     java.lang.SecurityManager.checkRead(SecurityManager.java:871)
     java.io.File.exists(File.java:700)
     SyksyHTTPServlet.doPost(SyksyHTTPServlet.java:31)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)The exception seems to occur when I'm trying to check whether the file already
exists or not.
The data directory has all permissions (read, write and execute) set for all users,
and I have made an empty file called result inside the data directory for testing.
This file has read and write permissions enabled for all users.
Here's my code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.Enumeration;
import java.util.List;
import java.util.ArrayList;
public class SyksyHTTPServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          int totalCount = 0;
          List list;
          String song = request.getParameter("song");
          PrintWriter out = response.getWriter();
          File file = new File("./data/result");
          if(file.exists()) // this is line 31, which seems to cause the exception
               list = readFile(file);
          else
               file.createNewFile();
               list = new ArrayList();
          list.add(song);
          writeFile(file, list);
          for(int i = 0 ; i < list.size() ; i++)
               out.println(list.get(i));
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private List readFile(File file)
          List list = null;
          try
               FileInputStream fis = new FileInputStream(file);
               ObjectInputStream ois = new ObjectInputStream(fis);
               list = (ArrayList)ois.readObject();
               ois.close();
          catch(Exception e)
               e.printStackTrace();
          return list;
     private void writeFile(File file, List list)
          try
               FileOutputStream fos = new FileOutputStream(file);
               ObjectOutputStream oos = new ObjectOutputStream(fos);
               oos.writeObject(list);
               oos.flush();
               oos.close();
          catch(Exception e)
               e.printStackTrace();
}I'm using Tomcat 5.5 on Ubuntu Linux, if that has anything to do with this.
I'll appreciate all help.
kari-matti

Hello again.
I'm still having problems with this. I made
a simple servlet that reads from and writes
to text file. The reading part work fine on my
computer, but the writing doesn't, not even
an exception is thrown if the file exists that
I'm trying to write to. If I try to create a new
file I'll get an exception about file permissions.
I also asked a friend of mine to try this same
servlet on his windows computer and it works
as it should.
Here's the code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ReadServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          String s = "";
          PrintWriter out = response.getWriter();
          String docroot = getServletContext().getRealPath( "/" );
          out.println("docroot: "+docroot);
          File file = new File(docroot+"test.txt");
          if(file.exists())
               s = readFile(file);
               out.println(s);
          else
               out.println("file not found");
               //file.createNewFile();                    // causes exception
               //out.println("new file created.");
          writeFile(file, "written by servlet");
          out.println("Now look in the file "+file.getPath());
          out.println("and see if it contains text 'written by servlet'");
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private String readFile(File file)
          FileInputStream fis = null;
          BufferedInputStream bis = null;
          DataInputStream dis = null;
          String s = "";
          try
               fis = new FileInputStream(file);
               bis = new BufferedInputStream(fis);
               dis = new DataInputStream(bis);
               s = dis.readLine();
               fis.close();
               bis.close();
               dis.close();
          catch(Exception e)
               e.printStackTrace();
          return s;
     private void writeFile(File file, String s)
          FileOutputStream fos = null;
          BufferedOutputStream bos = null;
          DataOutputStream dos = null;
          try
               fos = new FileOutputStream(file);
               bos = new BufferedOutputStream(fos);
               dos = new DataOutputStream(bos);
               dos.writeChars(s);
               fos.flush();
               bos.flush();
               dos.flush();
               fos.close();
               bos.close();
               dos.close();
          catch(Exception e)
               e.printStackTrace();
}And if someone wants to test this servlet I can
give a war package.
Any advices?
kari-matti

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

WD Tv live - Problema condivisione file

Similar Messages

Maybe you are looking for